"/etc/rc.d/netif stop XXX". The old globbing pattern failed to account for the
possibility of a tab occuring before "inet".
Reviewed by: will
Approved by: ken (mentor, implicit)
MFC after: Never (bug affects head only)
Sponsored by: Spectra Logic
Newly-configured systems should use $cloned_interfaces.
- Call clone_{up,down}() and ifnet_rename() in rc.d/netif {start,stop}.
ifnet_rename() now accepts an interface name list as its argument.
- Add rc.d/netif clear. The "clear" subcommand is basically equivalent to
"stop" but it does not call clone_down().
- Add "ifname:sticky" keyword into $cloned_interfaces. If :sticky is
specified, the interface will not be destroyed in rc.d/netif stop.
- Add cloned_interfaces_sticky={YES,NO}. This variable globally sets
:sticky keyword above for all interfaces. The default value is NO.
When cloned_interfaces_sticky=YES, :nosticky keyword can be used to
override it on per interface basis.
- inet 192.0.2.1-10 netmask 255.255.255.0 (inet range spec + ifconfig options)
- inet6 2001:db8:1::1-f prefixlen 60 (inet6 range spec + ifconfig options)
If prefixlen or netmask option is specified with CIDR notation at
the same time, the option is used.
Tested by: Michael Grimm
MFC after: 3 days
notation like 2001:db8:1:1.
- Use eui64 flag in ifconfig(8) instead of network6_getladdr()[*] for
interface indentifier part.
Suggested by: ume [*]
MFC after: 3 days
sbin/devd/devd.cc
All output will now go to syslog(3) if devd is daemonized, or stderr
if it's running in the foreground.
sbin/devd/devd.8
Remove the "-D" flag. Filtering messages by priority now
happens in the usual syslog way. For performance reasons, a few
extra-verbose debugging statements are now conditional on the "-d" (do
not daemonize) flag.
etc/syslog.conf
etc/newsyslog.conf
Direct messages from devd(8) to /var/log/devd.log, but leave it
disabled by default
Reviewed by: eadler
Approved by: gibbs (co-mentor)
MFC after: never (removed a command-line option from devd)
- Reconnect with some minor modifications, in particular now selsocket()
internals are adapted to use sbintime units after recent'ish calloutng
switch.
device names "md" or "md[0-9]*" and a "file" option are specified in
/etc/fstab like this:
md none swap sw,file=/swap.bin 0 0
- Add GBDE/GELI encrypted swap space specification support, which
rc.d/encswap supported. The /etc/fstab lines are like the following:
/dev/ada1p1.bde none swap sw 0 0
/dev/ada1p2.eli none swap sw 0 0
.eli devices accepts aalgo, ealgo, keylen, and sectorsize as options.
swapctl(8) can understand an encrypted device in the command line
like this:
# swapctl -a /dev/ada2p1.bde
- "-L" flag is added to support "late" option to defer swapon until
rc.d/mountlate runs.
- rc.d script change:
rc.d/encswap -> removed
rc.d/addswap -> just display a warning message if $swapfile is defined
rc.d/swap1 -> renamed to rc.d/swap
rc.d/swaplate -> newly added to support "late" option
These changes alleviate a race condition between device creation/removal
and swapon/swapoff.
MFC after: 1 week
Reviewed by: wblock (manual page)
Not only this is a bit cleaner, it allows multiple instances of hostapd to be
running on the system host, useful for simultaneous dual-band WiFi.
This is similar to ifconfig_wlanX="WPA" but it uses /etc/hostapd-wlanX.conf.
Compatibility with hostapd_enable=YES/NO was kept.
Reviewed by: adrian
forced to 3 so that the output of this script is always displayed.
In fact, setting this flag is identical to setting
daily_status_security_output to an empty string. To make the logic
less confusing, change the behavior of daily_status_security_inline
such that it just forces daily_status_security_output to an empty
string and then applies the normal logic.
PR: conf/178611
Submitted by: Jason Unovitch <jason.unovitch@gmail.com>
MFC after: 3 days
requests reload or restart, which, in addition of testing the
configuration, will also generate host keys when they are not
present (previous behavior).
Obtained from: FreeNAS
Ok'ed by: bdrewery, des
MFC after: 1 week
This is an extended version of ipv4_addr_IF which supports both IPv4 and
IPv6, and multiple range specifications. To avoid to generate too many
addresses, the maximum number of the generated addresses is currently
limited to 31.
- Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable.
- ipv6_prefix_IF now supports !/64 prefix length. In addition to the old
64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64
is supported.
- Replace ifconfig command with $IFCONFIG_CMD variable to support
a dry-run mode in the future.
- Remove IP aliases before removing all of IPv4 addresses when doing
"rc.d/netif down".
- Add a DAD wait to network6_getladdr() because it is possible to fail to
configure an EUI64 address when ipv6_prefix_IF is specified.
A summary of the supported ifconfig_* variables is as follows:
# IPv4 configuration.
ifconfig_em0="inet 192.168.0.1"
# IPv6 configuration.
ifconfig_em0_ipv6="inet6 2001:db8::1/64"
# IPv4 address range spec. Now deprecated.
ipv4_addr_em0="10.2.1.1-10"
# IPv6 alias.
ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70"
# IPv4 alias.
ifconfig_em0_alias1="inet 10.2.2.1/24"
# IPv4 alias with range spec w/o AF keyword (backward compat).
ifconfig_em0_alias2="10.3.1.1-10/32"
# IPv6 alias with range spec.
ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64"
# ifconfig_IF_aliases is just like ifconfig_IF_aliasN.
ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24"
# IPv6 alias (backward compat)
ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64"
# IPv6 alias w/o AF keyword (backward compat)
ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64"
# IPv6 prefix.
ipv6_prefix_em0="2001:db8::/64"
Tested by: Kimmo Paasiala
ntpdate_config was set to NULL the conditional would (counter to prevailing
logic) succeed -- leading to awk attempting to redirect from a NULL pathname
standard-in. While we're here, make the script consistant with itself by
removing the {curlies} around ntpdate_config (they are unnecessary).
{,ipv6_}static_routes and rc.d/routing. For example:
static_routes="foo bar:em0"
route_foo="-net 10.0.0.0/24 -gateway 192.168.2.1"
route_bar="-net 192.168.1.0/24 -gateway 192.168.0.2"
At boot time, all of the static routes are installed as before.
The differences are:
- "/etc/rc.d/netif start/stop <if>" now configures static routes
with :<if> if any.
- "/etc/rc.d/routing start/stop <af> <if>" works as well. <af> cannot be
omitted when <if> is specified, but a keyword "any" or "all" can be used
for <af> and <if>.
debug files for userland programs and libraries. The "-g" debug flag
is automatically applied when WITH_DEBUG_FILES is set.
The debug files are now named ${prog}.debug and ${shlib}.debug for
consistency with other systems and documentation. In addition they are
installed under /usr/lib/debug, to simplify the process of installing
them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the
base system place the standalone debug files in a .debug subdirectory.
GDB automatically searches both of these directories for standalone
debug files.
Thanks to everyone who contributed changes, review, and testing during
development.
apply to most jails but do apply to vnet jails. This includes adding
a new sysctl "security.jail.vnet" to identify vnet jails.
PR: conf/149050
Submitted by: mdodd
MFC after: 3 days
Add netif as a requirement of syslogd to get lo0 up. Currently, this
doesn't affect the rc order, because mountcritremote already depends on
netif.
Reviewed by: eadler
Approved by: kenm (mentor)
MFC after: 2 weeks
- Use the absolute pathname for ip6addrctl.
- Use "install" instead of "add" to reduce the number of invocations.
Reported by: Tatsuki Makino [*]
PR: conf/175006 [*]
MFC after: 1 week
upcoming 3.3 release (branching and freezing expected in a few weeks).
Preliminary release notes can be found at the usual location:
<http://llvm.org/docs/ReleaseNotes.html>
An MFC is planned once the actual 3.3 release is finished.
The rules themselves typically have shell-like patterns and it is
incorrect when they get replaced with matching filesystem entries.
Shell magic by: jilles
MFC after: 2 weeks
There are three situations where the sysctl script is called:
1. "start", very early
2. "lastload", near the end of rc
3. "reload", at admin request while the system is booted
Ignore unknown OIDs in situation 1 because kernel modules may not be loaded
yet and complain about them in situations 2 and 3.
PR: conf/174595
Submitted by: Olivier Smedts
space configured for rc.d/dumpon to designate for dumping -- then exit
silently rather than with a
> realpath: /dev/dumpdev: No such file or directory
error message.
An argument could be made that we should print a (more informative) warning
message; but given that under the same conditions the rc.d/dumpon script will
already print a
> No suitable dump device was found
warning, it seems that printing an additional
> Dump device does not exist. Savecore not run.
warning would be superfluous.
than number as is done in install so as to differ binding of names to
ids.
Remove the -W flag from the mtree command so that the correct user and
group is recorded rather than the default.
targets to be run without root privilege.
Information about ownership, group, flags, and suid bits are stored in
the file specified by METALOG which defaults to ${DESTDIR}/METALOG.
This file can be used in conjunction with bsdtar or makefs to generate
archives or file system images with correct permissions.
The packageworld target has been altered to use this metadata allowing
non-root releases (subject to further changes in release/Makefile.)
Sponsored by: DARPA, AFRL
Reviewed by: ian, ray
"ln -sfh <bar> <foo>" or the links would fail when a valid link to a
directly was in place at <foo>.
Reported by: peter
Tested by: peter
Pointy hat to: brooks
refactor the link section of distrib-dirs to alwasy install to a full
path (the link contents remain relative as they should).
Eliminate the use of the "rm -r[f] <foo>; ln -s <bar> <foo>" pattern in
favor of "ln -sf <bar> <foo>". None of these links could be directories
on a system installed in the last decade.
Sponsored by: DARPA, AFRL
Reviewed by: mtree
mtree in a shell loop so there is only one mtree commandline. Move the
implementation of LOCAL_MTREE into etc/Makefile.
Sponsored by: DARPA, AFRL
Reviewed by: mtree :)
Do this per jail started, not per address. This will allow DAD to complete
and services to properly start. Before we have seen problems with services
trying to start before the IPv6 address was available to use and thus
erroring and failing to start.
MFC after: 3 days
installing. This allows things like running installworld for 10-CURRENT
on a 9.0-RELEASE system without adding extra users and groups to the
passwd and group files.
To prevent potentially risky uid/gid mismatches on systems with
non-standard local values, require that DESTDIR be set if DB_FROM_SRC is
set.
Sponsored by: DARPA, AFRL
Reviewed by: peter
This prevents unprivileged users to lock too much memory.
- Set memorylocked limit to 64Mb for daemon login class.
Some daemons such as amd(8) and watchdogd(8) calls mlockall(2) on
startup, they are run from init(8) which uses daemon login class.
- Set memorylocked limit to unlimited for root login class.
Suggested by: avg
Approved by: kib (mentor)
MFC after: 1 week
be kept around to the 10 most recent ones.
Add UPDATING entry with info how to return to the previous behaviour (no
limits).
Obtained from: WHEEL Systems
provide dump directory. Eliminate this redundant argument. This changes
the usage, but the only risk here is that a warning will be printed
about directory given as device.
- Update usage of -C option.
- When clearing dump header from the given device there is also no need to
provide dump directory, although additional arguments for -c were not
documented.
- Document that -v can be used with -c and that list of devices can be given.
Obtained from: WHEEL Systems
The XC900M acts as a Ubiquiti XR9 (and I _think_ SR9) by default;
it uses the same 900MHz<->2.4GHz downconverter mapping.
However it has an alternative frequency mapping which squeezes in a couple
more half/quarter rate channels. Since the default HAL doesn't support
fractional tuning (sub-1MHz) in 2.4GHz mode on the AR5413/AR5414, they
implement it using a jumper.
Datasheet: http://www.xagyl.com/download/XC900M_Datasheet.pdf
Thankyou to Xagyl Communications for the XC900M NICs and Edgar Martinez
for organising the donation.
Tested:
* XC900M <-> XC900M
* Ubiquiti XR9 <-> XC900M
TODO:
* Test against SR9 and GZ901 if possible (the IEEE channel<->frequency
mapping may not match up, thanks to the slightly different channels
involved)
auditdistd (distributed audit daemon) to the build:
- Manual cross references
- Makefile for auditdistd
- rc.d script, rc.conf entrie
- New group and user for auditdistd; associated aliases, etc.
The audit trail distribution daemon provides reliable,
cryptographically protected (and sandboxed) delivery of audit tails
from live clients to audit server hosts in order to both allow
centralised analysis, and improve resilience in the event of client
compromises: clients are not permitted to change trail contents
after submission.
Submitted by: pjd
Sponsored by: The FreeBSD Foundation (auditdistd)
It also doesn't work with make -s.
Prefer the use of builtin make features.
PR: misc/126312
Reported by: Nejc Skoberne <nejc@skoberne.net>
Submitted by: bdrewery
Approved by: cperciva
MFC after: 1 week
Since I've committed this I've receieved roughly an equal
amount of email thanking me for making this change
and asking me to revert it.
I've resisted making this change because
new users tend to prefer less over more
and these users are the least likely to know
how to change the PAGER on their own.
Requested by: many
Objected to: just as many
Decision made by: core
Approved by: cperciva
MFC after: 3 days
floppies.
Its unlikely that anyone actually uses these or cares about these
anymore, since we support other floppy types and this change doesn't
hurt - just add it.
PR: conf/40777
Submitted by: Antti Kantee <pooka@cubical.fi>
Arrival-Date: Fri Jul 19 08:50:02 PDT 2002
Approved by: cperciva (implicit)
MFC after: 1 week
but committing it helps to get everyone on the same page and makes
sure we make progress.
Tinderbox breakages that are the result of this commit are entirely
the committer's fault -- in other words: buildworld testing on amd64
only.
Credits follow:
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Sponsored by: Isilon Systems
Based on work by: keramida@
Thanks to: gnn@, mdf@, mlaier@, sjg@
Special thanks to: keramida@
local.9600. Whilst the actual binary termios(4) definitions and preceeding
comments for local.9600 indicate that parity is disabled, getty(8)
internally simulates parity based on the presence or absence of the 'np'
flag.
PR: conf/76226
Submitted by: peter
Approved by: grog (co-mentor)
MFC after: 1 month
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.
In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.
Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.
This is not targeted for MFC.
GIANT from VFS. This code is particulary broken and fragile and other
in-kernel implementations around, found in other operating systems,
don't really seem clean and solid enough to be imported at all.
If someone wants to reconsider in-kernel NTFS implementation for
inclusion again, a fair effort for completely fixing and cleaning it
up is expected.
In the while NTFS regular users can use FUSE interface and ntfs-3g
port to work with their NTFS partitions.
This is not targeted for MFC.
GIANT from VFS. In addition, disconnect also netncp, which is a base
requirement for NWFS.
In the possibility of a future maintenance of the code and later
readd to the FreeBSD base, maybe we should think about a better location
for netncp. I'm not entirely sure the / top location is actually right,
however I will let network people to comment on that more specifically.
This is not targeted for MFC.
umsX character device returns a read error. Update devd.conf rules
to use "DEVFS" events which are generated after that the umsX
character device node has been created/destroyed, and then there
should be no need for moused to wait up to 10 seconds for umsX to
be ready. Opening umsX should not fail except if the kernel is low
on memory. In that case the user can replug the USB mouse or use
"usbconfig" to reset the device. In case of USB mouse devices,
moused should neither retry to open its character device,
once the first read error has happened. This is an indication
of device detach.
MFC after: 1 week
Trying to determine current lowest C-state after an AC event is racy
with C-states actually being changed by ACPI platform and kernel driver.
MFC after: 3 weeks
systems are fully "ready to go".
'FILESYSTEMS' states: "This is a dummy dependency, for services which
require file systems to be mounted before starting." However, we have
'var' which is was run after 'FILESYSTEMS' and can mount /var if it
already isn't mounted. Furthermore, several scripts cannot use /var
until 'cleanvar' has done its thing. Thus "FILESYSTEMS" hasn't really
meant all critical file systems are fully usable.
gives machine unique values from the firmware.
* The kernel is more likely to be unique than /bin/ls (but no need to
stuff many megabytes into /dev/random, so hash it).
* Change ordering to give larger variance across reboots to reduce
predictability.
r128060 for "hardware-supplied entropy" reversed this without reason,
seems a typo.
* Isolate "better than nothing" implementation to a function.
Submitted by: obrien & Arthur Mesh <arthurmesh@gmail.com>
Sponsored by: Juniper Networks
