bsd.progs.mk generates a separate depend file for every program being
built, but then it does not properly tell each submake to use those
individual files. Properly propagate the depend file to use.
Discovered while preparing the update of atf to 0.21 and noticing that
the test programs were not being relinked to the new library.
This change is "make tinderbox" clean.
This code has had an extensive rewrite and a good series of reviews, both by the author and other parties. This means a lot of code has been simplified. Pluggable structures for high-rate entropy generators are available, and it is most definitely not the case that /dev/random can be driven by only a hardware souce any more. This has been designed out of the device. Hardware sources are stirred into the CSPRNG (Yarrow, Fortuna) like any other entropy source. Pluggable modules may be written by third parties for additional sources.
The harvesting structures and consequently the locking have been simplified. Entropy harvesting is done in a more general way (the documentation for this will follow). There is some GREAT entropy to be had in the UMA allocator, but it is disabled for now as messing with that is likely to annoy many people.
The venerable (but effective) Yarrow algorithm, which is no longer supported by its authors now has an alternative, Fortuna. For now, Yarrow is retained as the default algorithm, but this may be changed using a kernel option. It is intended to make Fortuna the default algorithm for 11.0. Interested parties are encouraged to read ISBN 978-0-470-47424-2 "Cryptography Engineering" By Ferguson, Schneier and Kohno for Fortuna's gory details. Heck, read it anyway.
Many thanks to Arthur Mesh who did early grunt work, and who got caught in the crossfire rather more than he deserved to.
My thanks also to folks who helped me thresh this out on whiteboards and in the odd "Hallway track", or otherwise.
My Nomex pants are on. Let the feedback commence!
Reviewed by: trasz,des(partial),imp(partial?),rwatson(partial?)
Approved by: so(des)
Released on October 23rd, 2014.
* Restored the atf(7) manual page to serve as a reference to all the other
manual pages shipped by ATF.
* Added the -s flag to atf-sh to support specifying the shell interpreter
to be used.
* Removed ATF_WORKDIR. The only remaining consumers have been converted to
use the standard TMPDIR environment variable. As a benefit, and because
Kyua forces the TMPDIR to live within the test case's work directory,
any stale files left behind by ATF will be automatically cleaned up.
* Documented the environment variables recognized by each component in the
relevant manual pages. This information was lost with the atf-config(1)
removal.
* Added a new "require.diskspace" metadata property to test cases so that
they can specify the minimum amount of disk space required for the test
to run.
* Renamed the atf-{c,c++,sh}-api(3) manual pages to atf-{c,c++,sh}(3) for
discoverability purposes. Symbolic links are provided for the time
being to still make the old names visible.
* Issue #5: Recommend the (expected, actual) idiom for calls to the test
macros in the manual pages.
* Issue #7: Stopped catching unhandled exceptions in atf-c++ tests. This
propagates the crash to the caller, which in turn allows it to obtain
proper debugging information. In particular, Kyua should now be able to
extract a stacktrace pinpointing the problem.
* Issue #8: Fixed atf-c/macros_test:use test failures spotted by the clang
that ships with FreeBSD 11.0-CURRENT.
* Issue #12: Improved documentation of atf-sh(3) and atf-check(1) by better
explaining how they relate to each other.
* Issue #14: Stopped setting 'set -e' in atf-sh. This setting was
initially added as a way to enable a "strict" mode in the library and to
make test cases fail fast when they run unprotected commands. However,
doing so in the library is surprising as the responsibility of enabling
'set -e' should be on the user's code. Also, 'set -e' introduces
inconsistent behavior on subshells and users do not expect that.
* Issue #15: Fixed atf_utils_{fork,wait} to support nested calls.
* Issue #16: Fixed test failures (by removing a long-standing hack) on
systems that lack \e support in printf(1).
* Issue #19: Removed stale references to atf-config and atf-run.
- convert boot1.efi to corrrectly calculate the lba for what the
media reports and convert the size based on what FreeBSD uses.
The existing code would use the 512 byte lba and convert the
size using 4K byte size.
- make fsck_msdosfs read the boot block as 4K so the read doesn't
fail on a 4Kn drive since FreeBSD will error out parition reads
of a block. Make the bpbBytesPerSec check a multiple of 512 since
it can be 512 or 4K depending on the disk. This allows fsck to
pass checking the EFI partition on a 4Kn disk.
To create the EFI file system I used:
newfs_msdos -F 32 -S 4096 -c 1 -m 0xf8 <partition>
This works for booting 512 and 4Kn disks.
Caveat is that loader.efi cannot read the 4Kn EFI partition. This isn't
critical right now since boot1.efi will read loader.efi from the ufs
partition. It looks like loader.efi can be fixed via making some of the
512 bytes reads more flexible. loader.efi doesn't have trouble reading
the ufs partition. This is probably a simple fix.
I now have FreeBSD installed on a system with 4Kn drives and tested the
same code works on 512.
MFC after: 1 week
in the radeonkms driver.
Note: In PCI mode virtual addresses on the graphics card that map to system
RAM are translated to physical addresses by the graphics card itself. In
AGP mode address translation is done by the AGP chipset so fictitious
addresses appear on the system bus. For the CPU cache management to work
correctly when the CPU accesses this memory it needs to use the same
fictitious addresses (and let the chipset translate them) instead of using
the physical addresses directly.
Reviewed by: kib
MFC after: 1 month
When multicast capable interface goes away, it leaves multicast groups,
this leads to generate MLD reports, but MLD code does deffered send and
MLD reports are queued in the in6_multi's in6m_scq ifq. The problem is
that in6_multi structures are freed when interface leaves multicast groups
and thread that does deffered send will not take these queued packets.
PR: 194577
MFC after: 1 week
Sponsored by: Yandex LLC
to mount_nfs(8). They are implemented on Linux, OS X, and Solaris,
and thus can be expected to appear in automounter maps.
Reviewed by: rmacklem@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
without restarting whole lookup
Restart is only needed when fp was closed by current process, which is a much
rarer event than ref/deref by some other thread.
A read barrier was necessary because fd table pointer and table size were
updated separately, opening a window where fget_unlocked could read new size
and old pointer.
This patch puts both these fields into one dedicated structure, pointer to which
is later atomically updated. As such, fget_unlocked only needs data a dependency
barrier which is a noop on all supported architectures.
Reviewed by: kib (previous version)
MFC after: 2 weeks
quad_t in setusercontext(). While here, sanitize the clamping of the
priority value, and use the correct type for the return value of
login_getcapnum().
Reviewed by: kib
MFC after: 3 days
- Add an example of using etcupdate diff.
- Create a subsection on bootstrapping that is below the simple
examples. This should make it clearer that 'etcupdate extract' is
a one-time operation and not part of the common workflow. It also
adds more suggestions on when bootstrapping is needed and additional
steps to make future merges simpler.
Reviewed by: adrian
MFC after: 3 days
This makes it possible to format stuff like this:
target xxx {
lun 0 { path /foo/bar; size 4G; }
}
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
are returned during discovery based on initiator portal, name, and CHAP
credentials.
Reviewed by: mav@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
expression (:M) is empty, not the not matched (:N) is empty. The former case
means we have not found the TEST_SUBDIR value in SUBDIR
Reported by: rodrigc
X-MFC with: r273803
Pointyhat to: me (did not use a clean install root)
Sponsored by: EMC / Isilon Storage Division
This makes VMWare VAAI Thin Provisioning Stun primitive activate, pausing
the virtual machine, when backing storage (ZFS pool) is getting overflowed.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
much every T5 card that does _not_ have "-SO" in its name is RDMA
capable).
This plugs into the OFED verbs framework and allows userspace RDMA
applications to work over T5 RNICs. Tested with rping.
Obtained from: Chelsio Communications
Relnotes: Yes
Sponsored by: Chelsio Communications
appending the TESTS_SUBDIRS variable to SUBDIR
Duplicate directory entries can cause unexpected side effects, like
installing the same files multiple times. This can be easily
reproduced via the following testcase prior to this commit:
SUBDIR= dir
TESTS_SUBDIRS+= dir
.include <bsd.test.mk>
Sponsored by: EMC / Isilon Storage Division
- Move the existing code to x86/x86/identcpu.c since it is x86-specific.
- If the CPUID2_HV flag is set, assume a hypervisor is present and query
the 0x40000000 leaf to determine the hypervisor vendor ID. Export the
vendor ID and the highest supported hypervisor CPUID leaf via
hv_vendor[] and hv_high variables, respectively. The hv_vendor[]
array is also exported via the hw.hv_vendor sysctl.
- Merge the VMWare detection code from tsc.c into the new probe in
identcpu.c. Add a VM_GUEST_VMWARE to identify vmware and use that in
the TSC code to identify VMWare.
Differential Revision: https://reviews.freebsd.org/D1010
Reviewed by: delphij, jkim, neel
unit 0.
It seems that this 'simplification' was copied to all GPIO drivers in tree.
This fix a bug where a GPIO controller could fail to attach its children
(gpioc and gpiobus) if another GPIO driver attach first.
initial MPA exchange must be tracked this way so that t4_tom's state for
the tid is all clean at the time the tid transitions to RDMA mode. Once
it does, t4_tom is out of the way and iw_cxgbe uses the qp endpoints
directly.
Sponsored by: Chelsio Communications
Add a regression test to pw(8) because the bug was discovered via using:
pw groupmod
PR: 187189
Reported by: mcdouga9@egr.msu.edu
Tested by: mcdouga9@egr.msu.edu
Patch by: Marc de la Gueronniere
