- most of the kernel code will not care about the actual encoding of
scope zone IDs and won't touch "s6_addr16[1]" directly.
- similarly, most of the kernel code will not care about link-local
scoped addresses as a special case.
- scope boundary check will be stricter. For example, the current
*BSD code allows a packet with src=::1 and dst=(some global IPv6
address) to be sent outside of the node, if the application do:
s = socket(AF_INET6);
bind(s, "::1");
sendto(s, some_global_IPv6_addr);
This is clearly wrong, since ::1 is only meaningful within a single
node, but the current implementation of the *BSD kernel cannot
reject this attempt.
Submitted by: JINMEI Tatuya <jinmei__at__isl.rdc.toshiba.co.jp>
Obtained from: KAME
It creates very huge provider (41PB) /dev/gzero.
On BIO_READ request it zero-fills bio_data and on BIO_WRITE it does nothing.
You can also set kern.geom.zero.clear sysctl to 0 to do nothing even for
BIO_READ.
I'm using it for performance testing where it is very helpful.
MFC after: 3 days
size-scheme. Also add commented NO_BIND_FOO options for people who want named
but not all of the bloat it likes to include by default.
While here, make a comment about BOOT_COMCONSOLE_SPEED.
most of the hardcoding of device names in installed convenience scripts.
Provide a new script (root/updatep) to easily update the ALTROOTSLICE. It
does the same as updatep1/updatep2 without hardcoded device names. If noone
protests, I'd like to get rid of updatep1/updatep2 at some point.
As an extra bonus: turn on the error led while updating (on hardware with a
led).
bridge but the interface can still be changed afterwards.
This falls under the 'dont do that' category but log an warning when INVARIANTS
is defined.
Approved by: mlaier (mentor)
MFC after: 3 days
monitoring API, which might or might not be the same as the internal
maximum (currently none).
Export flag information on UMA zones -- in particular, whether or
not this is a secondary zone, and so the keg free count should be
considered in that light.
MFC after: 1 day
descriptors that are still marked owned in #ifdef GEM_RINT_TIMEOUT
instead of #if 0 for convenience.
- Remove stale code and comment about relying on the preset XIF config.
- In case of a watchdog timeout call the init function instead of just
the start function so the chip is properly reset.
Merge from hme(4):
- Convert to use bus_dmamap_load_mbuf_sg() for loading RX buffers.
- Protect from a duplicate mbuf free panic in case the DMA engine hangs.
Reviewed by: yongari
Tested on: powerpc(grehan), sparc64
MFC after: 1 week
chips are commonly found, it makes sense to have it in GENERIC. This
is a candidate for a RELENG_6 MFC.
Approved by; peter
Requested by: pav
Tested by: pav
be used to pass statistics regarding dropped, matched and received
packet counts from the kernel to user-space. While we are here
introduce a new counter for filtered or matched packets. We currently
keep track of packets received or dropped by the bpf device, but not
how many packets actually matched the bpf filter.
-Introduce net.bpf.stats sysctl OID
-Move sysctl variables after the function prototypes so we can
reference bpf_stats_sysctl(9) without build errors.
-Introduce bpf descriptor counter which is used mainly for sizing
of the xbpf_d array.
-Introduce a xbpf_d structure which will act as an external
representation of the bpf_d structure.
-Add a the following members to the bpfd structure:
bd_fcount - Number of packets which matched bpf filter
bd_pid - PID which opened the bpf device
bd_pcomm - Process name which opened the device.
It should be noted that it's possible that the process which opened
the device could be long gone at the time of stats collection. An
example might be a process that opens the bpf device forks then exits
leaving the child process with the bpf fd.
Reviewed by: mdodd
status after attach, only after a reset
o when setting diversity via the sysctl don't update sc_diversity
until we know the hal requested worked
o while here eliminate sc_hasdiversity and sc_hastpc; just query
the hal each time since these are the only places we need to know
MFC after: 3 days
conversion routine, now change my mind and add one, memstat_strerror(3),
which returns a const char * pointer to a string describing the error,
to be used on the results of memstat_mtl_geterror().
While here, also correct a minor typo in the HISTORY man page.
Pointers on improving ease of internationalization would be
appreciated.
MFC after: 1 day
- Define a set of libmemstat(3) error constants, which are used by all
libmemstat(3) methods except for memstat_mtl_alloc(), which allocates
a memory type list and may return ENOMEM via errno.
- Define a per-memory_type_list current error value, which is set when a
call associated with a memory list fails. This requires wrapping a
structure around the queue(9) list head data structure, but this change
is not visible to libmemstat(3) consumers due to using access methods.
- Add a new accessor method, memstat_mtl_geterror() to retrieve the error
number.
- Consistently set the error number in a number of failure modes where
previously some combination of setting errno and printf'ing error
descriptions was used. libmemstat(3) will now no longer print to stdio
under any circumstances. Returns of NULL/-1 for errors remain the
same.
This avoids use of stdio, misuse of error numbers, and should make it
easier to program a libmemstat(3) consumer able to print useful error
messages. Currently, no error-to-string function is provided, as I'm
unsure how to address internationalization concerns.
MFC after: 1 day
try and discourage use outside the library.
Remove duplicate declaration of memstat_mtl_free() from memstat_internal.h,
as it's not internal, and the memstat.h definition suffices.
(i.e., smart battery) and fix various bugs found during the cleanup.
API changes:
* kernel access:
Access to individual batteries is now via devclass_find("battery").
Introduce new methods ACPI_BATT_GET_STATUS (for _BST-formatted data) and
ACPI_BATT_GET_INFO (for _BIF-formatted data). The helper function
acpi_battery_get_battinfo() now takes a device_t instead of a unit #
argument. If dev is NULL, this signifies all batteries.
* ioctl access:
The ACPIIO_BATT_GET_TYPE and ACPIIO_BATT_GET_BATTDESC ioctls have been
removed. Since there is now no need for a mapping between "virtual" unit
and physical unit, usermode programs can just specify the unit directly and
skip the old translation steps. In fact, acpiconf(8) was actually already
doing this and virtual unit was the same as physical unit in all cases
since there was previously only one battery type (acpi_cmbat). Additionally,
we now map the ACPIIO_BATT_GET_BIF and ACPIIO_BATT_GET_BST ioctls for all
batteries, if they provide the associated methods.
* apm compatibility device/ioctls: no change
* sysctl: no change
Since most third-party applications use the apm(4) compat interface, there
should be very few affected applications (if any).
Reviewed by: bruno
MFC after: 5 days
on -current by Ben Kaduk <minimarmot@gmail.com>.
Add a hack of my own to allow the user to supply the paths to the INF and
SYS files on the command line.
discussing with me, and I obviously disagree seeing that afterwards
(srandomdev() back out not fix any thing, it can only mask the problem).
So, back out the back out and return srandomdev().
People who have problems with repeated quotes should use -D fortune
option for debugging to see is the problem in (1) /dev/random initialization
or in (2) fortune code itself.
I will be glad to help, but I can't reproduce repeated quote situation
on my machine.
In either case found, (1) or (2) should be fixed instead of removing
srandomdev().
We must not increase a capability of buffer size here,
because codes which call these functions expect that dst and src
are the same size.
This will cause problem when someone convert a character whose
length is different between charsets on smbfs which was changed
to use xlat16 converter.
- removes obsolete files/dirs or libraries.
- works in interactive (default) and batch mode
- respects DISTDIR
- documented in UPDATING and build(7)
The head of the file ObsoleteFiles.inc contains instructions how to add
obsolete files/dirs/libs to the list. Obviously one should add obsolete
files to this list, when he removes a file/dir/lib from the basesystem.
Additionally add check-old target:
- allows re@ to check if a file on the obsolete list resurfaces
Design goals:
- allows full control by the user (default interactive mode)
- possibility of scripted removal of obsolete files (batch mode)
- opt-in removal of files (explicit list of files)
- seperate removal of libs (2 delete targets)
Important design decissions:
- structured list of files to remove instead of a plain text file:
* allows to remove additional files if a NO_foo knob is specified
without the need to change the targets (no NO_foo knob is respected
yet)
- not using mtree like NetBSD does:
* mtree doesn't has an interactive mode
Discussed on: arch (long ago), current (this year)
Additional input from: re (hrs)
Approved by: mentor (joerg)
Limbaugh.
This should have already worked properly if random(4) has been
initialized correctly, but it seems that this is frequently not the
case. Instead, use the microsecond part of the current time as the
seed.
from OpenFirmware be 16 pages to avoid fragmentation in the list
of mappings returned when the kernel requests it in pmap_bootstrap.
This allows a static buffer to be used when obtaining the existing
mappings - very useful on the G5 when random physical pages can't
be grabbed because they can't be BAT-mapped.
MFC after: 3 days
- Test that the basic socket options have the right defaults, that we can
change them, read them back, etc.
- Add and remove some multicast addresses.
- Send a loopback multicast address and make sure it arrives intact.
There's more that could be done here, but it's a start.
MFC after: 3 days
