Add net.link.lagg.lacp.default_strict_mode which defines
the default value for LACP strict compliance for created
lagg devices.
Also:
* Add lacp_strict option to ifconfig(8).
* Fix lagg(4) creation examples.
* Minor style(9) fix.
MFC after: 1 week
The mbuf length fields must be set before m_adj() is called else
m_adj() will not always adjust the mbuf and an unaligned read
exception can trigger inside the network stack. This can happen on
platforms where unaligned reads are not supported. Adjust a length
check to include the 2-byte ethernet alignment while at it.
MFC after: 3 days
- Drop TSF initialization; device can discover it without our help.
- Do not touch R92C_BCN_CTRL_EN_BCN bit in STA mode.
- Add 'static' keyword for function definition.
Tested with RTL8188EU, STA mode.
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D3801
On the mpc85xx SoC family, writes to any part of a word in the CCSR affect the
full word. This prevents single-byte writes from taking the desired effect.
Code copied directly from ARM.
This speeds up buildworld by 16% on my system and buildkernel by 35%.
Rather than calling mkdep(1), which is just a wrapper around 'cc -E',
use the modern -MD -MT -MF flags to gather and generate dependencies during
compilation. This flag was introduced in GCC "a long time ago", in GCC 3.0,
and is also supported by Clang. (It appears that ICC also supports this but I
do not have access to test it). This avoids running the preprocessor *twice*
for every build, in both 'make depend' and 'make all'. This is especially
noticeable when using ccache since it does not cache preprocessor results from
mkdep(1) / 'cc -E', but still speeds up compilation with the -MD flags.
For 'make depend' a tree-walk is still done to ensure that all DPSRCS
are generated when expected, and that beforedepend/afterdepend and
_EXTRADEPEND are all still respected. In time this may change but for now
I've been conservative. The time for a tree-walk with -j combined with
SUBDIR_PARALLEL is not significant. For example, it takes about 9 seconds
with -j15 to walk all of src/ for 'make depend' now on my system.
A .depend file is still generated with the various rules that apply to
the final target, or custom rules. Otherwise there are now
per-built-object-file .depend files, such as .depend.filename.o. These
are included directly by make rather than populating .depend with a loop
and .depend lines, which only added overhead to the now almost-NOP 'make
depend' phase.
Before this I experimented with having mkdep(1) called in parallel per-file.
While this improved the kernel and lib/libc 'make depend' phase, it resulted
in slower build times overall.
The -M flags are removed from CFLAGS when linking since they have no effect.
Enabling this by default, for src or out-of-src, can be done once more testing
has been done, such as a ports exp-run, and with more compilers.
The system I used for testing was:
WITNESS
Build options: -j20 WITH_LLDB=yes WITH_DEBUG_FILES=yes WITH_FAST_DEPEND=yes
DISK: ZFS 3-way mirror with very slow disks using SSD l2arc/log.
The arc was fully populated with src tree files.
RAM: 76GiB
CPU: Intel(R) Xeon(R) CPU L5520 @2.27GHz
2 package(s) x 4 core(s) x 2 SMT threads = hw.ncpu=16
buildworld:
x buildworld-before
+ buildworld-fastdep
+-------------------------------------------------------------------------------+
|+ |
|+ |
|+ xx x|
| |_MA___||
|A |
+-------------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 3744.13 3794.31 3752.25 3763.5633 26.935139
+ 3 3153.34 3155.16 3154.2 3154.2333 0.91045776
Difference at 95.0% confidence
-609.33 +/- 43.1943
-16.1902% +/- 1.1477%
(Student's t, pooled s = 19.0569)
buildkernel:
x buildkernel-before
+ buildkernel-fastdep
+-------------------------------------------------------------------------------+
|+ x |
|++ xx|
| A||
|A| |
+-------------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 571.57 573.94 571.79 572.43333 1.3094401
+ 3 369.12 370.57 369.3 369.66333 0.79033748
Difference at 95.0% confidence
-202.77 +/- 2.45131
-35.4225% +/- 0.428227%
(Student's t, pooled s = 1.0815)
Sponsored by: EMC / Isilon Storage Division
MFC after: 3 weeks
Relnotes: yes
- Fix mbuf leaks in iwn_raw_xmit() and iwn_xmit_task()
(regression since r288178).
- Check IWN_FLAG_RUNNING flag under lock.
- Remove m->m_pkthdr.rcvif initialization (fixed in r283994).
- Enclose some values in return statements into parentheses.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4069
attributes when replying to a TLP from a Root Port. As a workaround,
disable No Snoop and Relaxed Ordering in the Root Port of each T5 adapter
during attach so that CPU-initiated requests do not contain these flags.
Note that this affects CPU-initiated requests to all devices under this
root port.
Reviewed by: np
MFC after: 1 week
Sponsored by: Chelsio
PCI-Express capability registers (that is, PCI config registers in the
standard PCI config space belonging to the PCI-Express capability
register set).
Note that all of the current PCI-e registers are either 16 or 32-bits,
so only widths of 2 or 4 bytes are supported.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Chelsio
Differential Revision: https://reviews.freebsd.org/D4088
Since r288350, ic_wme_task() is called via ieee80211_runtask(),
so, any additional deferring from the driver side is not needed.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4072
* Ensure that error information isn't lost.
* Log the error code in all cases.
* Don't overwrite bio_completed set to 0 from the error condition.
MFC after: 2 weeks
Sponsored by: Multiplay
wrong value in the comparison, leading to incorrectly setting the new
value.
This has been observed in the ZFS code. Without this we can lose track of
the reference count in a zrlock object.
We should move to use the generic atomic functions, however as this has
been observed I would prefer to have this working, then move to the generic
functions.
PR: 204037
Sponsored by: ABT Systems Ltd
Fix two issues with the current event channel code, first ENABLED_SETSIZE is
not correctly defined and then using a BITSET to store the per-cpu masks is
not portable to other arches, since on arm32 the event channel arrays shared
with the hypervisor are of type uint64_t and not long. Partially restore the
previous code but switch the bit operations to use the recently introduced
xen_{set/clear/test}_bit versions.
Reviewed by: Julien Grall <julien.grall@citrix.com>
Sponsored by: Citrix Systems R&D
Differential Revision: https://reviews.freebsd.org/D4080
sysctl and will always be on. The former split between default and
fast forwarding is removed by this commit while preserving the ability
to use all network stack features.
Differential Revision: https://reviews.freebsd.org/D4042
Reviewed by: ae, melifaro, olivier, rwatson
MFC after: 1 month
Sponsored by: Rubicon Communications (Netgate)
- Add bcm2835_mbox_property for generic property request, it accepts
pointer to prepared property chan message and its size, forwards
it to MBOX and copies result back
- Make all bcm2835_mbox_XXX functions that use property channel go
through bcm2835_mbox_property path. Do not accept device_t as
an argument, it's not required: all DMA operatiosn should go
through mbox device, and all API consumers should report errors
on their side.
DEX bit is set to 1 and exception raised whenever vectorized operation is
attempted on the VFP implementation that does not support it (i.e. on Cortex A7)
Actually, object classify callbacks can skip some opcodes, that could
be rewritten. We will deteremine real numbed of rewritten opcodes a bit
later in this function.
Reported by: David H. Wolfskill <david at catwhisker dot org>
to transmit the buffer.
ath_tx_start() may manipulate/reallocate the mbuf as part of the DMA
code, so we can't expect the mbuf can be returned back to the caller.
Now, the net80211 ifnet work changed the semantics slightly so
if an error is returned here, the mbuf/reference is freed by the
caller (here, it's net80211.)
So, once we reach ath_tx_start(), we never return failure. If we fail
then we still return OK and we free the mbuf/noderef ourselves, and
we increment OERRORS.
check_ipfw_rule_body() function. This function is intended to just
determine that rule has some opcodes that can be rewrited. Then the
ref_rule_objects() function will determine real number of rewritten
opcodes using classify callback.
Reviewed by: melifaro
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
object name correctness. Each type of object can do more strict checking
in own implementation. Do such checks for tables in check_table_name().
Reviewed by: melifaro
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
- Use pmap_quick_enter_page/pmap_quick_remove_page to bounce non-cacheline
aligned head and tail fragments
- Switch from static fragment size to configurable one, newer firmware
passes cache line size as cache_line_size DTB parameter.
With these changes both RPi and RPi2 pass functinal part of vchiq_test
not be found. Otherwise, relocations against such symbols will be silently
ignored instead of causing an error to be raised.
Reviewed by: kib
MFC after: 1 week
