- Do not set if_collisions on interrupt, read them in ti_get_counter().
- Add missing bus_dmamap_sync(BUS_DMASYNC_PREREAD) in ti_ioctl2(). [1]
Submitted by: mav [1]
then drop lock, run the attach routines, and then set it to specific
proto. This removes tons of WITNESS warnings.
- Make lagg protocol attach handlers not failing and allocate memory
with M_WAITOK.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
struct flock are done in the sys_fcntl(), which mean that compat32 used
direct access to userland pointers.
Move code from sys_fcntl() to new wrapper, kern_fcntl_freebsd(), which
performs neccessary userland memory accesses, and use it from both
native and compat32 fcntl syscalls.
Reported by: jhibbits
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
holding a write reference on the filesystem. Try to get write
reference in unblocked way after all vnodes are resolved; if failed,
drop all locks and retry after waiting for suspension end.
The VFS_UNMOUNT() methods for UFS and tmpfs try to establish
suspension on unmount, while covered vnode is locked by VFS, which
prevents namei() from stepping over the mount point. The thread doing
namei() sleeps on the covered vnode lock, owning the write ref.
Reported by: bdrewery
Tested by: bdrewery (previous version), pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
- Use bus_*() instead of bus_space_*().
- Use device_printf().
- Remove unused global variables and the extra warning suppression
they required.
- Use callout() instead of timeout().
Reviewed by: se
node's interrupts=<...> property creating resource list entries with a
single common implementation. This change makes ofw_bus_intr_to_rl() the
one true copy of that code and removes the copies of it from other places.
This also adds handling of the interrupts-extended property, which allows
specifying multiple interrupts for a node where each interrupt can have a
separate interrupt-parent. The bindings for this state that the property
cells contain an xref phandle to the interrupt parent followed by whatever
interrupt info that parent normally expects. This leads to having a
variable number of icells per interrupt in the property. For example you
could have <&intc1 1 &intc2 26 9 0 &intc3 9 4>.
Differential Revision: https://reviews.freebsd.org/D803
When the FreeBSD kernel is loaded from Xen the symtab and strtab are
not loaded the same way as the native boot loader. This patch adds
three new global variables to ddb that can be used to specify the
exact position and size of those tables, so they can be directly used
as parameters to db_add_symbol_table. A new helper is introduced, so callers
that used to set ksym_start and ksym_end can use this helper to set the new
variables.
It also adds support for loading them from the Xen PVH port, that was
previously missing those tables.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
ddb/db_main.c:
- Add three new global variables: ksymtab, kstrtab, ksymtab_size that
can be used to specify the position and size of the symtab and
strtab.
- Use those new variables in db_init in order to call db_add_symbol_table.
- Move the logic in db_init to db_fetch_symtab in order to set ksymtab,
kstrtab, ksymtab_size from ksym_start and ksym_end.
ddb/ddb.h:
- Add prototype for db_fetch_ksymtab.
- Declate the extern variables ksymtab, kstrtab and ksymtab_size.
x86/xen/pv.c:
- Add support for finding the symtab and strtab when booted as a Xen
PVH guest. Since Xen loads the symtab and strtab as NetBSD expects
to find them we have to adapt and use the same method.
amd64/amd64/machdep.c:
arm/arm/machdep.c:
i386/i386/machdep.c:
mips/mips/machdep.c:
pc98/pc98/machdep.c:
powerpc/aim/machdep.c:
powerpc/booke/machdep.c:
sparc64/sparc64/machdep.c:
- Use the newly introduced db_fetch_ksymtab in order to set ksymtab,
kstrtab and ksymtab_size.
but taken from hardware.
- Mechanically convert to if_inc_counter() the rest of counters.
- While here fix 3 instances of the same bug, when error counter was ++
in one place and then assigned in other place, losing the increment.
Achieve that storing soft errors counters in softc.
that the driver is not going to be ever improved in terms of hardware
support, it is going to be only maintained as our kernel APIs change.
Carrying all the compatibility with ancient versions of NetBSD, OpenBSD,
Linux and BSDI, as well as obsoleted FreeBSD versions has no reason.
Drop packet if pkg->ifp is NULL, which is the case here.
ref. https://github.com/HardenedBSD/hardenedBSD
commit 4eef3881c64f6e3aa38eebbeaf27a947a5d47dd7
PR 193861 -- DUMMYNET LAYER2: kernel panic
in this case a kernel panic occurs. Hence, when we do not get an interface,
we just drop the packet in question.
PR: 193681
Submitted by: David Carlier <david.carlier@hardenedbsd.org>
Obtained from: Hardened BSD
MFC after: 2 weeks
Relnotes: yes
addresses. (The chip doesn't really care, it's just that it needs to be
told explicitly if unicast DMACs are checked for "hits" in the hash that
is used after the TCAM entries are all used up).
or I_T NEXUS LOSS, clear all minor UAs for the LUN, redundant in this case.
All SAM specifications tell that target MAY do it, but libiscsi initiator
seems require it to be done, terminating connection with error if some more
UAs happen to be reported during iSCSI connection.
MFC after: 3 days
the wired attribute of the mapping. As result, some pmap
implementations clear the wired state of the page table entries, which
breaks invariants and allows the entries to be lost. Avoid calling
vm_map_pmap_enter() for the MADV_WILLNEED on the wired entry, the
pages must be already mapped.
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
made autofs mix them up: the second one wasn't visible in ls(1) output,
and trying to access it would trigger mount for the first one.
foobar host:/foobar
foo host:/foo
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
For now restrict it to amd64. Other architectures might be
re-added later once tested.
Remove the drivers from the global NOTES and files files and move
them to the amd64 specifics.
Remove the drivers from the i386 modules build and only leave the
amd64 version.
Rather than depending on "inet" depend on "pci" and make sure that
ixl(4) and ixlv(4) can be compiled independently [2]. This also
allows the drivers to build properly on IPv4-only or IPv6-only
kernels.
PR: 193824 [2]
Reviewed by: eric.joyner intel.com
MFC after: 3 days
References:
[1] http://lists.freebsd.org/pipermail/svn-src-all/2014-August/090470.html
Summary:
Add the beginnings of multipass suspend/resume, by introducing
BUS_SUSPEND_CHILD/BUS_RESUME_CHILD, and move the PCI driver to this.
Reviewers: jhb
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D590
- Priority argument is introduced to sleepq_*wait* in r177085
- sleepq_calc_signal_retval is removed from implementation
- sleepq_catch_signals is internal now
Differential Revision: https://reviews.freebsd.org/D794
Reviewed by: jhb
Approved by: jhb
Update linux compat minimum revision to match linux-c6 now in ports. This
is a candidate for 10.1 R as it matches the current state of supported
linux compat packages in the ports tree.
PR: 187786
Reviewed by: xmj
MFC after: 2 days
Relnotes: yes
struct kinfo_file.
- Move the various fill_*_info() methods out of kern_descrip.c and into the
various file type implementations.
- Rework the support for kinfo_ofile to generate a suitable kinfo_file object
for each file and then convert that to a kinfo_ofile structure rather than
keeping a second, different set of code that directly manipulates
type-specific file information.
- Remove the shm_path() and ksem_info() layering violations.
Differential Revision: https://reviews.freebsd.org/D775
Reviewed by: kib, glebius (earlier version)
1. changed the code so that 2**16 keys are supported
2. changed the number of possible fans in a system from 2 to 6
3. added write support for some fan sysctls
4. added a new sysctl which shows the ID of the fan
5. added four more apple models with their temperature keys
6. changed the maxnumber of temperature keys from 36 to 80
7. replaced several fixed buf sizes to sizeof buf
Obtained from: Denis Ahrens denis at h3q.com
MFC after: 4 weeks
The current TSO limitation feature only takes the total number of
bytes in an mbuf chain into account and does not limit by the number
of mbufs in a chain. Some kinds of hardware is limited by two
factors. One is the fragment length and the second is the fragment
count. Both of these limits need to be taken into account when doing
TSO. Else some kinds of hardware might have to drop completely valid
mbuf chains because they cannot loaded into the given hardware's DMA
engine. The new way of doing TSO limitation has been made backwards
compatible as input from other FreeBSD developers and will use
defaults for values not set.
Reviewed by: adrian, rmacklem
Sponsored by: Mellanox Technologies
MFC after: 1 week
footprint systems(32M/64M) and didn't leave enough free memory to load modules
when it was setting up page tables that for sizes that are never used on
these smallish boards.
Set kmem_zmax to PAGE_SIZE on these smaller systems (< 128M) to keep this
from happening. Verified on mips32 h/w.
PR: 193465
Submitted by: delphij
Reviewed by: adrian
We've always considered the mpcore timers to be a single monolithic device
and we defined our own fdt binding for it with our own compat string. The
published bindings treat the timers as two separate devices, a global
timer and a "timer-watchdog" device for the per-cpu private timers. Thus
our binding has two tuples in the regs property, one set of registers for
the global timer and one for the private timers. The published bindings
have two separate devices, each with a single set of registers. (Note that
we don't use the optional watchdog feature of the hardware.)
These changes add the compat strings for the published bindings. If our
own compat string appears, we expect to get two sets of memory resources.
For the published bindings, there's only one set of memory resources, and
only the private timers have an associated interrupt.
The other major change is that there can no longer be a single global var
for the softc pointer because now there may be multiple devices at
runtime. Since the global timer is used only as a timecounter and the
private timers only as eventtimers, and there will only be one of each,
those are now the pointers which are global, and the priv fields of those
structures backlink to the device softc.
behavior was changed in r271888 so update the comment block to reflect this.
MSR_KGSBASE is accessible from the guest without triggering a VM-exit. The
permission bitmap for MSR_KGSBASE is modified by vmx_msr_guest_init() so get
rid of redundant code in vmx_vminit().
code. There are only a handful of MSRs common between the two so there isn't
too much duplicate functionality.
The VT-x code has the following types of MSRs:
- MSRs that are unconditionally saved/restored on every guest/host context
switch (e.g., MSR_GSBASE).
- MSRs that are restored to guest values on entry to vmx_run() and saved
before returning. This is an optimization for MSRs that are not used in
host kernel context (e.g., MSR_KGSBASE).
- MSRs that are emulated and every access by the guest causes a trap into
the hypervisor (e.g., MSR_IA32_MISC_ENABLE).
Reviewed by: grehan
