- All those diffs to syscalls.master for each architecture *are*
necessary. This needed clarification; the stub code generation for
mlockall() was disabled, which would prevent applications from
linking to this API (suggested by mux)
- Giant has been quoshed. It is no longer held by the code, as
the required locking has been pushed down within vm_map.c.
- Callers must specify VM_MAP_WIRE_HOLESOK or VM_MAP_WIRE_NOHOLES
to express their intention explicitly.
- Inspected at the vmstat, top and vm pager sysctl stats level.
Paging-in activity is occurring correctly, using a test harness.
- The RES size for a process may appear to be greater than its SIZE.
This is believed to be due to mappings of the same shared library
page being wired twice. Further exploration is needed.
- Believed to back out of allocations and locks correctly
(tested with WITNESS, MUTEX_PROFILING, INVARIANTS and DIAGNOSTIC).
PR: kern/43426, standards/54223
Reviewed by: jake, alc
Approved by: jake (mentor)
MFC after: 2 weeks
striping to a per device round-robin algorithm.
Because of the policy of not attempting to retain previous swap
allocation on page-out, this means that a newly added swap device
almost instantly takes its 1/N share of the I/O load but it takes
somewhat longer for it to assume it's 1/N share of the pages if there
is plenty of space on the other devices.
Change the 8G total swapspace limitation to 8G per device instead
by using a per device blist rather than one global blist. This
reduces the memory footprint by 75% (typically a couple hundred
kilobytes) for the common case with one swapdevice but NSWAPDEV=4.
Remove the compile time constant limit of number of swap devices,
there is no limit now. Instead of a fixed size array, store the
per swapdev structure in a TAILQ.
Total swap space is still addressed by a 32 bit page number and
therefore the upper limit is now 2^42 bytes = 16TB (for i386).
We still do not allocate the first page of each device in order to
give some amount of protection to any bsdlabel at the start of the
device.
A new device is appended after the existing devices in the swap space,
no attempt is made to fill in holes left behind by swapoff (this can
trivially be changed should it ever become a problem).
The sysctl vm.nswapdev now reflects the number of currently configured
swap devices.
Rename vm_swap_size to swap_pager_avail for consistency with other
exported names.
Change argument type for vm_proc_swapin_all() and swap_pager_isswapped()
to be a struct swdevt pointer rather than an index.
Not changed: we are still using blists to manage the free space,
but since the swapspace is no longer fragmented by the striping
different resource managers might fare better.
in sync with the backend machdep code. When cpu_thread_init() does not
have the same idea of KSTACK_PAGES as the thing that created the kstack,
all hell breaks loose.
Bad alc! no cookie! :-)
to the machine-independent parts of the VM. At the same time, this
introduces vm object locking for the non-i386 platforms.
Two details:
1. KSTACK_GUARD has been removed in favor of KSTACK_GUARD_PAGES. The
different machine-dependent implementations used various combinations
of KSTACK_GUARD and KSTACK_GUARD_PAGES. To disable guard page, set
KSTACK_GUARD_PAGES to 0.
2. Remove the (unnecessary) clearing of PG_ZERO in vm_thread_new. In
5.x, (but not 4.x,) PG_ZERO can only be set if VM_ALLOC_ZERO is passed
to vm_page_alloc() or vm_page_grab().
- Move struct sigacts out of the u-area and malloc() it using the
M_SUBPROC malloc bucket.
- Add a small sigacts_*() API for managing sigacts structures: sigacts_alloc(),
sigacts_free(), sigacts_copy(), sigacts_share(), and sigacts_shared().
- Remove the p_sigignore, p_sigacts, and p_sigcatch macros.
- Add a mutex to struct sigacts that protects all the members of the struct.
- Add sigacts locking.
- Remove Giant from nosys(), kill(), killpg(), and kern_sigaction() now
that sigacts is locked.
- Several in-kernel functions such as psignal(), tdsignal(), trapsignal(),
and thread_stopped() are now MP safe.
Reviewed by: arch@
Approved by: re (rwatson)
fork1() and never changes.
- The proc lock is enough to cover reading p_state, so push down sched_lock
into the PRS_NORMAL case of the switch on p_state.
race where a thread could assume that a process was swapped in by
PHOLD() when it actually wasn't fully swapped in yet.
- In faultin(), always msleep() if PS_SWAPPINGIN is set instead of doing
this check after bumping p_lock in the PS_INMEM == 0 case. Also,
sched_lock is only needed for setting and clearning swapping PS_*
flags and the swap thread inhibitor.
- Don't set and clear the thread swap inhibitor in the same loops as the
pmap_swapin/out_thread() since we have to do it under sched_lock.
Instead, mimic the treatment of the PS_INMEM flag and use separate loops
to set the inhibitors when clearing PS_INMEM and clear the inhibitors
when setting PS_INMEM.
- swapout() now returns with the proc lock held as it holds the lock
while adjusting the swapping-related PS_* flags so that the proc lock
can be used to test those flags.
- Only use the proc lock to check the swapping-related PS_* flags in
several places.
- faultin() no longer requires sched_lock to be held by callers.
- Rename PS_SWAPPING to PS_SWAPPINGOUT to be less ambiguous now that we
have PS_SWAPPINGIN.
trying to acquire it's proc lock since the proc lock may not have been
constructed yet.
- Split up the one big comment at the top of the loop and put the pieces
in the right order above the various checks.
Reported by: kris (1)
constants VM_MIN_ADDRESS, VM_MAXUSER_ADDRESS, USRSTACK and PS_STRINGS.
This is mainly so that they can be variable even for the native abi, based
on different machine types. Get stack protections from the sysentvec too.
This makes it trivial to map the stack non-executable for certain abis, on
machines that support it.
address space yet.
- Check whether a process is a system process prior to dereferencing
its p_vmspace. Aio assumes that only the curthread switches the address
space of a system process.
The process allocator now caches and hands out complete process structures
*including substructures* .
i.e. it get's the process structure with the first thread (and soon KSE)
already allocated and attached, all in one hit.
For the average non threaded program (non KSE that is) the allocated thread and its stack remain attached to the process, even when the process is
unused and in the process cache. This saves having to allocate and attach it
later, effectively bringing us (hopefully) close to the efficiency
of pre-KSE systems where these were a single structure.
Reviewed by: davidxu@freebsd.org, peter@freebsd.org
s/SNGL/SINGLE/
s/SNGLE/SINGLE/
Fix abbreviation for P_STOPPED_* etc flags, in original code they were
inconsistent and difficult to distinguish between them.
Approved by: julian (mentor)
by pmap_qenter() and pmap_qremove() is pointless. In fact, it probably
leads to unnecessary pmap_page_protect() calls if one of these pages is
paged out after unwiring.
Note: setting PG_MAPPED asserts that the page's pv list may be
non-empty. Since checking the status of the page's pv list isn't any
harder than checking this flag, the flag should probably be eliminated.
Alternatively, PG_MAPPED could be set by pmap_enter() exclusively
rather than various places throughout the kernel.
swapped in, we do not have to ask for the scheduler thread to do
that.
- Assert that a process is not swapped out in runq functions and
swapout().
- Introduce thread_safetoswapout() for readability.
- In swapout_procs(), perform a test that may block (check of a
thread working on its vm map) first. This lets us call swapout()
with the sched_lock held, providing a better atomicity.
except for the fact tha they are presently swapped out. Also add a process
flag to indicate that the process has started the struggle to swap
back in. This will be needed for the case where multiple threads
start the swapin action top a collision. Also add code to stop
a process fropm being swapped out if one of the threads in this
process is actually off running on another CPU.. that might hurt...
Submitted by: Seigo Tanimura <tanimura@r.dl.itc.u-tokyo.ac.jp>
pmap_swapin_proc/pmap_swapout_proc functions from the MD pmap code
and use a single equivalent MI version. There are other cleanups
needed still.
While here, use the UMA zone hooks to keep a cache of preinitialized
proc structures handy, just like the thread system does. This eliminates
one dependency on 'struct proc' being persistent even after being freed.
There are some comments about things that can be factored out into
ctor/dtor functions if it is worth it. For now they are mostly just
doing statistics to get a feel of how it is working.
The ability to schedule multiple threads per process
(one one cpu) by making ALL system calls optionally asynchronous.
to come: ia64 and power-pc patches, patches for gdb, test program (in tools)
Reviewed by: Almost everyone who counts
(at various times, peter, jhb, matt, alfred, mini, bernd,
and a cast of thousands)
NOTE: this is still Beta code, and contains lots of debugging stuff.
expect slight instability in signals..
vm_map_user_pageable().
o Remove vm_map_pageable() and vm_map_user_pageable().
o Remove vm_map_clear_recursive() and vm_map_set_recursive(). (They were
only used by vm_map_pageable() and vm_map_user_pageable().)
Reviewed by: tegge
best path forward now is likely to change the lockmgr locks to simple
sleep mutexes, then see if any extra contention it generates is greater
than removed overhead of managing local locking state information,
cost of extra calls into lockmgr, etc.
Additionally, making the vm_map lock a mutex and respecting it properly
will put us much closer to not needing Giant magic in vm.
the motivation for saving and restoring the map->hint in useracc() is gone.
(The same tests that motivated this change in revision 1.57 now show that
there is no performance loss from removing it.) This was really a hack and
some day we would have had to add new synchronization here on map->hint
to maintain it.
While doing this, move it earlier in the sysinit boot process so that the
VM system can use it.
After that, the system is now able to use sx locks instead of lockmgr
locks in the VM system. To accomplish this, some of the more
questionable uses of the locks (such as testing whether they are
owned or not, as well as allowing shared+exclusive recursion) are
removed, and simpler logic throughout is used so locks should also be
easier to understand.
This has been tested on my laptop for months, and has not shown any
problems on SMP systems, either, so appears quite safe. One more
user of lockmgr down, many more to go :)
style(9)
- Minor space adjustment in cases where we have "( ", " )", if(), return(),
while(), for(), etc.
- Add /* SYMBOL */ after a few #endifs.
Reviewed by: alc
this is a low-functionality change that changes the kernel to access the main
thread of a process via the linked list of threads rather than
assuming that it is embedded in the process. It IS still embeded there
but remove all teh code that assumes that in preparation for the next commit
which will actually move it out.
Reviewed by: peter@freebsd.org, gallatin@cs.duke.edu, benno rice,
shared.
Also introduce vm_endcopy instead of using pointer tricks when
initializing new vmspaces.
The race occured because of how the reference was utilized:
test vmspace reference,
possibly block,
decrement reference
When sharing a vmspace between multiple processes it was possible
for two processes exiting at the same time to test the reference
count, possibly block and neither one free because they wouldn't
see the other's update.
Submitted by: green
mutex releases to not require flags for the cases when preemption is
not allowed:
The purpose of the MTX_NOSWITCH and SWI_NOSWITCH flags is to prevent
switching to a higher priority thread on mutex releease and swi schedule,
respectively when that switch is not safe. Now that the critical section
API maintains a per-thread nesting count, the kernel can easily check
whether or not it should switch without relying on flags from the
programmer. This fixes a few bugs in that all current callers of
swi_sched() used SWI_NOSWITCH, when in fact, only the ones called from
fast interrupt handlers and the swi_sched of softclock needed this flag.
Note that to ensure that swi_sched()'s in clock and fast interrupt
handlers do not switch, these handlers have to be explicitly wrapped
in critical_enter/exit pairs. Presently, just wrapping the handlers is
sufficient, but in the future with the fully preemptive kernel, the
interrupt must be EOI'd before critical_exit() is called. (critical_exit()
can switch due to a deferred preemption in a fully preemptive kernel.)
I've tested the changes to the interrupt code on i386 and alpha. I have
not tested ia64, but the interrupt code is almost identical to the alpha
code, so I expect it will work fine. PowerPC and ARM do not yet have
interrupt code in the tree so they shouldn't be broken. Sparc64 is
broken, but that's been ok'd by jake and tmm who will be fixing the
interrupt code for sparc64 shortly.
Reviewed by: peter
Tested on: i386, alpha
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
it to the MI area. KSE touched cpu_wait() which had the same change
replicated five ways for each platform. Now it can just do it once.
The only MD parts seemed to be dealing with fpu state cleanup and things
like vm86 cleanup on x86. The rest was identical.
XXX: ia64 and powerpc did not have cpu_throw(), so I've put a functional
stub in place.
Reviewed by: jake, tmm, dillon
(this commit is just the first stage). Also add various GIANT_ macros to
formalize the removal of Giant, making it easy to test in a more piecemeal
fashion. These macros will allow us to test fine-grained locks to a degree
before removing Giant, and also after, and to remove Giant in a piecemeal
fashion via sysctl's on those subsystems which the authors believe can
operate without Giant.
- Don't lock Giant in the scheduler() function except for when calling
faultin().
- In swapout_procs(), lock the VM before the proccess to avoid a lock order
violation.
- In swapout_procs(), release the allproc lock before calling swapout().
We restart the process scan after swapping out a process.
- In swapout_procs(), un #if 0 the code to bump the vmspace reference count
and lock the process' vm structures. This bug was introduced by me and
could result in the vmspace being free'd out from under a running
process.
- Fix an old bug where the vmspace reference count was not free'd if we
failed the swap_idle_threshold2 test.
vm_mtx does not recurse and is required for most low level
vm operations.
faults can not be taken without holding Giant.
Memory subsystems can now call the base page allocators safely.
Almost all atomic ops were removed as they are covered under the
vm mutex.
Alpha and ia64 now need to catch up to i386's trap handlers.
FFS and NFS have been tested, other filesystems will need minor
changes (grabbing the vm lock when twiddling page properties).
Reviewed (partially) by: jake, jhb
wakeup proc0 by hand to enforce the timeout.
- When swapping out a process, keep the process locked via the proc lock
from the first checks up until we clear PS_INMEM and set PS_SWAPPING in
swapout(). The swapout() function now must be called with the proc lock
held and releases it before returning.
- Comment out the code to attempt to lock a process' VM structures before
swapping out. It is broken in that it releases the lock after obtaining
it. If it does grab the lock, it needs to hand it off to swapout()
instead of releasing it. This can be revisisted when the VM is locked
as this is a valid test to perform. It also causes a lock order reversal
for the time being, which is the immediate cause for temporarily
disabling it.
- Don't hold Giant in the swapper daemon while we walk the list of
processes looking for a process to swap back in.
- Don't bother grabbing the sched_lock while checking a process' sleep
time in swapout_procs() to ensure that a process has been idle for at
least swap_idle_threshold2 before swapping it out. If we lose the race
we just let a process stay in memory until the next call of
swapout_procs().
- Remove some unneeded spl's, sched_lock does all the locking needed in
this case.
other "system" header files.
Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.
Sort sys/*.h includes where possible in affected files.
OK'ed by: bde (with reservations)
- All processes go into the same array of queues, with different
scheduling classes using different portions of the array. This
allows user processes to have their priorities propogated up into
interrupt thread range if need be.
- I chose 64 run queues as an arbitrary number that is greater than
32. We used to have 4 separate arrays of 32 queues each, so this
may not be optimal. The new run queue code was written with this
in mind; changing the number of run queues only requires changing
constants in runq.h and adjusting the priority levels.
- The new run queue code takes the run queue as a parameter. This
is intended to be used to create per-cpu run queues. Implement
wrappers for compatibility with the old interface which pass in
the global run queue structure.
- Group the priority level, user priority, native priority (before
propogation) and the scheduling class into a struct priority.
- Change any hard coded priority levels that I found to use
symbolic constants (TTIPRI and TTOPRI).
- Remove the curpriority global variable and use that of curproc.
This was used to detect when a process' priority had lowered and
it should yield. We now effectively yield on every interrupt.
- Activate propogate_priority(). It should now have the desired
effect without needing to also propogate the scheduling class.
- Temporarily comment out the call to vm_page_zero_idle() in the
idle loop. It interfered with propogate_priority() because
the idle process needed to do a non-blocking acquire of Giant
and then other processes would try to propogate their priority
onto it. The idle process should not do anything except idle.
vm_page_zero_idle() will return in the form of an idle priority
kernel thread which is woken up at apprioriate times by the vm
system.
- Update struct kinfo_proc to the new priority interface. Deliberately
change its size by adjusting the spare fields. It remained the same
size, but the layout has changed, so userland processes that use it
would parse the data incorrectly. The size constraint should really
be changed to an arbitrary version number. Also add a debug.sizeof
sysctl node for struct kinfo_proc.
mtx_enter(lock, type) becomes:
mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)
similarily, for releasing a lock, we now have:
mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.
The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.
Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:
MTX_QUIET and MTX_NOSWITCH
The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:
mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.
Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.
Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.
Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.
Finally, caught up to the interface changes in all sys code.
Contributors: jake, jhb, jasone (in no particular order)
- Proc locking in a few places.
- faultin() now must be called with the proc lock held.
- Split up swappable() into a couple of tests so that it can be locke in
swapout_procs().
- Use queue macros.
of explicit calls to lockmgr. Also provides macros for the flags
pased to specify shared, exclusive or release which map to the
lockmgr flags. This is so that the use of lockmgr can be easily
replaced with optimized reader-writer locks.
- Add some locking that I missed the first time.
- Close a small race condition. The sched_lock mutex protects
p->p_stat as well as the run queues. Another CPU could change p_stat
of the process while we are waiting for the lock, and we would end up
scheduling a process that isn't runnable.
include:
* Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The
alpha port is still in transition and currently uses both.)
* Per-CPU idle processes.
* Interrupts are run in their own separate kernel threads and can be
preempted (i386 only).
Partially contributed by: BSDi (BSD/OS)
Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
"rw" argument, rather than hijacking B_{READ|WRITE}.
Fix two bugs (physio & cam) resulting by the confusion caused by this.
Submitted by: Tor.Egge@fast.no
Reviewed by: alc, ken (partly)
Merge the contents (less some trivial bordering the silly comments)
of <vm/vm_prot.h> and <vm/vm_inherit.h> into <vm/vm.h>. This puts
the #defines for the vm_inherit_t and vm_prot_t types next to their
typedefs.
This paves the road for the commit to follow shortly: change
useracc() to use VM_PROT_{READ|WRITE} rather than B_{READ|WRITE}
as argument.
Replace various VM related page count calculations strewn over the
VM code with inlines to aid in readability and to reduce fragility
in the code where modules depend on the same test being performed
to properly sleep and wakeup.
Split out a portion of the page deactivation code into an inline
in vm_page.c to support vm_page_dontneed().
add vm_page_dontneed(), which handles the madvise MADV_DONTNEED
feature in a related commit coming up for vm_map.c/vm_object.c. This
code prevents degenerate cases where an essentially active page may
be rotated through a subset of the paging lists, resulting in premature
disposal.
When creating new processes (or performing exec), the new page
directory is initialized too early. The kernel might grow before
p_vmspace is initialized for the new process. Since pmap_growkernel
doesn't yet know about the new page directory, it isn't updated, and
subsequent use causes a failure.
The fix is (1) to clear p_vmspace early, to stop pmap_growkernel
from stomping on memory, and (2) to defer part of the initialization
of new page directories until p_vmspace is initialized.
PR: kern/12378
Submitted by: tegge
Reviewed by: dfr
is the preparation step for moving pmap storage out of vmspace proper.
Reviewed by: Alan Cox <alc@cs.rice.edu>
Matthew Dillion <dillon@apollo.backplane.com>
This takes the conditionals out of the code that has been tested by
various people for a while.
ps and friends (libkvm) will need a recompile as some proc structure
changes are made.
Submitted by: "Richard Seaman, Jr." <dick@tar.com>
