it must first ensure that the page is no longer mapped. This is
trivially accomplished by calling pmap_remove_all() a little earlier
in vm_page_cache(). While I'm in the neighborbood, make a related
panic message a little more useful.
Approved by: re (kensmith)
Reported by: Peter Holm and Konstantin Belousov
Reviewed by: Konstantin Belousov
a consequence of sparc64/sparc64/vm_machdep.c revision 1.76. It occurs
when uma_small_free() frees a page. The solution has two parts: (1) Mark
pages allocated with VM_ALLOC_NOOBJ as PG_UNMANAGED. (2) Defer the lock
assertion in pmap_page_is_mapped() until after PG_UNMANAGED is tested.
This is safe because both PG_UNMANAGED and PG_FICTITIOUS are immutable
flags, i.e., they do not change state between the time that a page is
allocated and freed.
Approved by: re (kensmith)
PR: 116794
cache: vm_object_page_remove() should convert any cached pages that
fall with the specified range to free pages. Otherwise, there could
be a problem if a file is first truncated and then regrown.
Specifically, some old data from prior to the truncation might reappear.
Generalize vm_page_cache_free() to support the conversion of either a
subset or the entirety of an object's cached pages.
Reported by: tegge
Reviewed by: tegge
Approved by: re (kensmith)
ways:
(1) Cached pages are no longer kept in the object's resident page
splay tree and memq. Instead, they are kept in a separate per-object
splay tree of cached pages. However, access to this new per-object
splay tree is synchronized by the _free_ page queues lock, not to be
confused with the heavily contended page queues lock. Consequently, a
cached page can be reclaimed by vm_page_alloc(9) without acquiring the
object's lock or the page queues lock.
This solves a problem independently reported by tegge@ and Isilon.
Specifically, they observed the page daemon consuming a great deal of
CPU time because of pages bouncing back and forth between the cache
queue (PQ_CACHE) and the inactive queue (PQ_INACTIVE). The source of
this problem turned out to be a deadlock avoidance strategy employed
when selecting a cached page to reclaim in vm_page_select_cache().
However, the root cause was really that reclaiming a cached page
required the acquisition of an object lock while the page queues lock
was already held. Thus, this change addresses the problem at its
root, by eliminating the need to acquire the object's lock.
Moreover, keeping cached pages in the object's primary splay tree and
memq was, in effect, optimizing for the uncommon case. Cached pages
are reclaimed far, far more often than they are reactivated. Instead,
this change makes reclamation cheaper, especially in terms of
synchronization overhead, and reactivation more expensive, because
reactivated pages will have to be reentered into the object's primary
splay tree and memq.
(2) Cached pages are now stored alongside free pages in the physical
memory allocator's buddy queues, increasing the likelihood that large
allocations of contiguous physical memory (i.e., superpages) will
succeed.
Finally, as a result of this change long-standing restrictions on when
and where a cached page can be reclaimed and returned by
vm_page_alloc(9) are eliminated. Specifically, calls to
vm_page_alloc(9) specifying VM_ALLOC_INTERRUPT can now reclaim and
return a formerly cached page. Consequently, a call to malloc(9)
specifying M_NOWAIT is less likely to fail.
Discussed with: many over the course of the summer, including jeff@,
Justin Husted @ Isilon, peter@, tegge@
Tested by: an earlier version by kris@
Approved by: re (kensmith)
changes the units from seconds to the value of 'ticks' when swapped
in/out. ULE does not have a periodic timer that scans all threads in
the system and as such maintaining a per-second counter is difficult.
- Change computations requiring the unit in seconds to subtract ticks
and divide by hz. This does make the wraparound condition hz times
more frequent but this is still in the range of several months to
years and the adverse effects are minimal.
Approved by: re
- p_sflag was mostly protected by PROC_LOCK rather than the PROC_SLOCK or
previously the sched_lock. These bugs have existed for some time.
- Allow swapout to try each thread in a process individually and then
swapin the whole process if any of these fail. This allows us to move
most scheduler related swap flags into td_flags.
- Keep ki_sflag for backwards compat but change all in source tools to
use the new and more correct location of P_INMEM.
Reported by: pho
Reviewed by: attilio, kib
Approved by: re (kensmith)
status after vm_pager_put_pages() is VM_PAGER_PEND, then it could have
already been recycled, i.e., freed and reallocated to a new purpose;
thus, asserting that such pages cannot be written is inappropriate.
Reported by: kris
Submitted by: tegge
Approved by: re (kensmith)
MFC after: 1 week
For this, introduce vm_map_fixed() that does that for MAP_FIXED case.
Dropping the lock allowed for parallel thread to occupy the freed space.
Reported by: Tijl Coosemans <tijl ulyssis org>
Reviewed by: alc
Approved by: re (kensmith)
MFC after: 2 weeks
sys/vm/device_pager.c:
Protect the creation of the phys pager with non-NULL handle with the
phys_pager_mtx. Lookup of phys pager in the pagers list by handle is now
synchronized with its removal from the list, and phys_pager_mtx is put
before vm object lock in lock order. Dispose the phys_pager_alloc_lock
and tsleep calls, together with acquiring Giant, since phys_pager_mtx
now covers the same block.
Reviewed by: alc
Approved by: re (kensmith)
of device pager in the pagers list by handle is now synchronized with
its removal from the list, and dev_pager_mtx is put before vm object
lock in lock order. Dispose the dev_pager_sx lock, since dev_pager_mtx
now covers the same block.
Noted by: kensmith
Reviewed by: alc
Approved by: re (kensmith)
vm_object_terminate() on a device-backed object at the same time that
another processor, call it Pa, is performing dev_pager_alloc() on the
same device. The problem is that vm_pager_object_lookup() should not be
allowed to return a doomed object, i.e., an object with OBJ_DEAD set,
but it does. In detail, the unfortunate sequence of events is: Pt in
vm_object_terminate() holds the doomed object's lock and sets OBJ_DEAD
on the object. Pa in dev_pager_alloc() holds dev_pager_sx and calls
vm_pager_object_lookup(), which returns the doomed object. Next, Pa
calls vm_object_reference(), which requires the doomed object's lock, so
Pa waits for Pt to release the doomed object's lock. Pt proceeds to the
point in vm_object_terminate() where it releases the doomed object's
lock. Pa is now able to complete vm_object_reference() because it can
now complete the acquisition of the doomed object's lock. So, now the
doomed object has a reference count of one! Pa releases dev_pager_sx
and returns the doomed object from dev_pager_alloc(). Pt now acquires
dev_pager_mtx, removes the doomed object from dev_pager_object_list,
releases dev_pager_mtx, and finally calls uma_zfree with the doomed
object. However, the doomed object is still in use by Pa.
Repeating my key point, vm_pager_object_lookup() must not return a
doomed object. Moreover, the test for the object's state, i.e.,
doomed or not, and the increment of the object's reference count
should be carried out atomically.
Reviewed by: kib
Approved by: re (kensmith)
MFC after: 3 weeks
d_mmap methods. prep_cdevsw() already installs the shims that
acquire/drop Giant for the methods of a driver that specified the
D_NEEDGIANT flag.
Reviewed by: alc
Approved by: re (kensmith)
1. Rewrite the backward scan. Specifically, reverse the order in which
pages are allocated so that upon failure it is never necessary to
free pages that were just allocated. Moreover, any allocated pages
can be put to use. This makes the backward scan behave just like the
forward scan.
2. Eliminate an explicit, unsynchronized check for low memory before
calling vm_page_alloc(). It serves no useful purpose. It is, in
effect, optimizing the uncommon case at the expense of the common
case.
Approved by: re (hrs)
MFC after: 3 weeks
vm_phys_free_pages(). Rename vm_phys_alloc_pages_locked() to
vm_phys_alloc_pages() and vm_phys_free_pages_locked() to
vm_phys_free_pages(). Add comments regarding the need for the free page
queues lock to be held by callers to these functions. No functional
changes.
Approved by: re (hrs)
vm_page_cowfault(). Initially, if vm_page_cowfault() sleeps, the given
page is wired, preventing it from being recycled. However, when
transmission of the page completes, the page is unwired and returned to
the page queues. At that point, the page is not in any special state
that prevents it from being recycled. Consequently, vm_page_cowfault()
should verify that the page is still held by the same vm object before
retrying the replacement of the page. Note: The containing object is,
however, safe from being recycled by virtue of having a non-zero
paging-in-progress count.
While I'm here, add some assertions and comments.
Approved by: re (rwatson)
MFC After: 3 weeks
vm_fault_additional_pages() that was introduced in revision 1.47. Then
as now, it is unnecessary because dev_pager_haspage() returns zero for
both the number of pages to read ahead and read behind, producing the
same exact behavior by vm_fault_additional_pages() as the special case
handling.
Approved by: re (rwatson)
tracks the total number of reactivated pages. (We have not been
counting reactivations by vm_fault() since revision 1.46.)
Correct a comment in vm_fault_additional_pages().
Approved by: re (kensmith)
MFC after: 1 week
of Giant in vm_pageout_scan() with VFS_LOCK_GIANT(), I had to eliminate
the acquisition of the vnode interlock before releasing the vm object's
lock because the vnode interlock cannot be held when VFS_LOCK_GIANT() is
performed. Unfortunately, this allows the vnode to be recycled between
the release of the vm object's lock and the vget() on the vnode.
In this revision, I prevent the vnode from being recycled by acquiring
another reference to the vm object and underlying vnode before releasing
the vm object's lock.
This change also addresses another preexisting but trivial problem. By
acquiring another reference to the vm object, I also prevent the vm
object from being recycled. Previously, the "vnodes skipped" counter
could be wrong because if it examined a recycled vm object.
Reported by: kib
Reviewed by: kib
Approved by: re (kensmith)
MFC after: 3 weeks
passed to vm_pageout_clean() cannot possibly be PG_UNMANAGED because
it came from the inactive queue and PG_UNMANAGED pages are not in any
page queue. Moreover, PG_UNMANAGED pages only exist in OBJT_PHYS
objects, and all pages within a OBJT_PHYS object are PG_UNMANAGED.
So, if the page that is passed to vm_pageout_clean() is not
PG_UNMANAGED, then it cannot be from an OBJT_PHYS object and its
neighbors from the same object cannot themselves be PG_UNMANAGED.
Reviewed by: tegge
This allocator uses a binary buddy system with a twist. First and
foremost, this allocator is required to support the implementation of
superpages. As a side effect, it enables a more robust implementation
of contigmalloc(9). Moreover, this reimplementation of
contigmalloc(9) eliminates the acquisition of Giant by
contigmalloc(..., M_NOWAIT, ...).
The twist is that this allocator tries to reduce the number of TLB
misses incurred by accesses through a direct map to small, UMA-managed
objects and page table pages. Roughly speaking, the physical pages
that are allocated for such purposes are clustered together in the
physical address space. The performance benefits vary. In the most
extreme case, a uniprocessor kernel running on an Opteron, I measured
an 18% reduction in system time during a buildworld.
This allocator does not implement page coloring. The reason is that
superpages have much the same effect. The contiguous physical memory
allocation necessary for a superpage is inherently colored.
Finally, the one caveat is that this allocator does not effectively
support prezeroed pages. I hope this is temporary. On i386, this is
a slight pessimization. However, on amd64, the beneficial effects of
the direct-map optimization outweigh the ill effects. I speculate
that this is true in general of machines with a direct map.
Approved by: re
In particular:
- Add an explicative table for locking of struct vmmeter members
- Apply new rules for some of those members
- Remove some unuseful comments
Heavily reviewed by: alc, bde, jeff
Approved by: jeff (mentor)
to the build.
This allocator uses a binary buddy system with a twist. First and
foremost, this allocator is required to support the implementation of
superpages. As a side effect, it enables a more robust implementation
of contigmalloc(9). Moreover, this reimplementation of
contigmalloc(9) eliminates the acquisition of Giant by
contigmalloc(..., M_NOWAIT, ...).
The twist is that this allocator tries to reduce the number of TLB
misses incurred by accesses through a direct map to small, UMA-managed
objects and page table pages. Roughly speaking, the physical pages
that are allocated for such purposes are clustered together in the
physical address space. The performance benefits vary. In the most
extreme case, a uniprocessor kernel running on an Opteron, I measured
an 18% reduction in system time during a buildworld.
This allocator does not implement page coloring. The reason is that
superpages have much the same effect. The contiguous physical memory
allocation necessary for a superpage is inherently colored.
Finally, the one caveat is that this allocator does not effectively
support prezeroed pages. I hope this is temporary. On i386, this is
a slight pessimization. However, on amd64, the beneficial effects of
the direct-map optimization outweigh the ill effects. I speculate
that this is true in general of machines with a direct map.
Approved by: re
- Use thread_lock() rather than sched_lock for per-thread scheduling
sychronization.
- Use the per-process spinlock rather than the sched_lock for per-process
scheduling synchronization.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
Now, we assume no more sched_lock protection for some of them and use the
distribuited loads method for vmmeter (distribuited through CPUs).
Reviewed by: alc, bde
Approved by: jeff (mentor)
- Rename PCPU_LAZY_INC into PCPU_INC
- Add the PCPU_ADD interface which just does an add on the pcpu member
given a specific value.
Note that for most architectures PCPU_INC and PCPU_ADD are not safe.
This is a point that needs some discussions/work in the next days.
Reviewed by: alc, bde
Approved by: jeff (mentor)
td_ru. This removes the requirement for per-process synchronization in
statclock() and mi_switch(). This was previously supported by
sched_lock which is going away. All modifications to rusage are now
done in the context of the owning thread. reads proceed without locks.
- Aggregate exiting threads rusage in thread_exit() such that the exiting
thread's rusage is not lost.
- Provide a new routine, rufetch() to fetch an aggregate of all rusage
structures from all threads in a process. This routine must be used
in any place requiring a rusage from a process prior to it's exit. The
exited process's rusage is still available via p_ru.
- Aggregate tick statistics only on demand via rufetch() or when a thread
exits. Tick statistics are kept in the thread and protected by sched_lock
until it exits.
Initial patch by: attilio
Reviewed by: attilio, bde (some objections), arch (mostly silent)
Probabilly, a general approach is not the better solution here, so we should
solve the sched_lock protection problems separately.
Requested by: alc
Approved by: jeff (mentor)
Change the VOP_OPEN(), vn_open() vnode operation and d_fdopen() cdev operation
argument from being file descriptor index into the pointer to struct file.
Proposed and reviewed by: jhb
Reviewed by: daichi (unionfs)
Approved by: re (kensmith)
These functions are intended to do the same actions of sx_xlock() and
sx_slock() but with the difference to perform an interruptible sleep, so
that sleep can be interrupted by external events.
In order to support these new featueres, some code renstruction is needed,
but external API won't be affected at all.
Note: use "void" cast for "int" returning functions in order to avoid tools
like Coverity prevents to whine.
Requested by: rwatson
Tested by: rwatson
Reviewed by: jhb
Approved by: jeff (mentor)
vm_map_pmap_enter() unless the caller is madvise(MADV_WILLNEED). With
the exception of calls to vm_map_pmap_enter() from
madvise(MADV_WILLNEED), vm_fault_prefault() and vm_map_pmap_enter()
are both used to create speculative mappings. Thus, always
reactivating cached pages is a mistake. In principle, cached pages
should only be reactivated by an actual access. Otherwise, the
following misbehavior can occur. On a hard fault for a text page the
clustering algorithm fetches not only the required page but also
several of the adjacent pages. Now, suppose that one or more of the
adjacent pages are never accessed. Ultimately, these unused pages
become cached pages through the efforts of the page daemon. However,
the next activation of the executable reactivates and maps these
unused pages. Consequently, they are never replaced. In effect, they
become pinned in memory.
vmcnts. This can be used to abstract away pcpu details but also changes
to use atomics for all counters now. This means sched lock is no longer
responsible for protecting counts in the switch routines.
Contributed by: Attilio Rao <attilio@FreeBSD.org>
VM_PHYSSEG_SPARSE depending on whether the physical address space is
densely or sparsely populated with memory. The effect of this
definition is to determine which of two implementations of
vm_page_array and PHYS_TO_VM_PAGE() is used. The legacy
implementation is obtained by defining VM_PHYSSEG_DENSE, and a new
implementation that trades off time for space is obtained by defining
VM_PHYSSEG_SPARSE. For now, all architectures except for ia64 and
sparc64 define VM_PHYSSEG_DENSE. Defining VM_PHYSSEG_SPARSE on ia64
allows the entirety of my Itanium 2's memory to be used. Previously,
only the first 1 GB could be used. Defining VM_PHYSSEG_SPARSE on
sparc64 allows USIIIi-based systems to boot without crashing.
This change is a combination of Nathan Whitehorn's patch and my own
work in perforce.
Discussed with: kmacy, marius, Nathan Whitehorn
PR: 112194
contigmalloc2() was always testing the first physical page for PG_ZERO,
not the current page of interest.
Submitted by: Michael Plass
PR: 81301
MFC after: 1 week
The problem is this: vm_fault_additional_pages() calls vm_pager_has_page(),
which calls vnode_pager_haspage(). Now when VOP_BMAP() returns an error (eg.
EOPNOTSUPP), vnode_pager_haspage() returns TRUE without initializing 'before'
and 'after' arguments, so we have some accidental values there. This bascially
was causing this condition to be meet:
if ((rahead + rbehind) >
((cnt.v_free_count + cnt.v_cache_count) - cnt.v_free_reserved)) {
pagedaemon_wakeup();
[...]
}
(we have some random values in rahead and rbehind variables)
I'm not entirely sure this is the right fix, maybe we should just return FALSE
in vnode_pager_haspage() when VOP_BMAP() fails?
alc@ knows about this problem, maybe he will be able to come up with a better
fix if this is not the right one.
causing a crash.
Suppose that we have two objects, obj and backing_obj, where
backing_obj is obj's backing object. Further, suppose that
backing_obj has a reference count of two. One being the reference
held by obj and the other by a map entry. Now, suppose that the map
entry is deallocated and its reference removed by
vm_object_deallocate(). vm_object_deallocate() recognizes that the
only remaining reference is from a shadow object, obj, and calls
vm_object_collapse() on obj. vm_object_collapse() executes
if (backing_object->ref_count == 1) {
/*
* If there is exactly one reference to the backing
* object, we can collapse it into the parent.
*/
vm_object_backing_scan(object, OBSC_COLLAPSE_WAIT);
vm_object_backing_scan(OBSC_COLLAPSE_WAIT) executes
if (op & OBSC_COLLAPSE_WAIT) {
vm_object_set_flag(backing_object, OBJ_DEAD);
}
Finally, suppose that either vm_object_backing_scan() or
vm_object_collapse() sleeps releasing its locks. At this instant,
another thread executes vm_object_split(). It crashes in
vm_object_reference_locked() on the assertion that the object is not
dead. If, however, assertions are not enabled, it crashes much later,
after the object has been recycled, in vm_object_deallocate() because
the shadow count and shadow list are inconsistent.
Reviewed by: tegge
Reported by: jhb
MFC after: 1 week
1) Eliminate an unnecessary check for fictitious pages. Specifically,
only device-backed objects contain fictitious pages and the object is
not device-backed.
2) Change the types of "psize" and "tmpidx" to vm_pindex_t in order to
prevent possible wrap around with extremely large maps and objects,
respectively. Observed by: tegge (last summer)
immediately flag any page that is allocated to a OBJT_PHYS object as
unmanaged in vm_page_alloc() rather than waiting for a later call to
vm_page_unmanage(). This allows for the elimination of some uses of
the page queues lock.
Change the type of the kernel and kmem objects from OBJT_DEFAULT to
OBJT_PHYS. This allows us to take advantage of the above change to
simplify the allocation of unmanaged pages in kmem_alloc() and
kmem_malloc().
Remove vm_page_unmanage(). It is no longer used.
vm_page_free_toq() to account for recent changes that allow
vm_page_free_toq() to be called on some pages without the page queues lock
being held, specifically, pages that are not contained in a vm object and
not a member of a page queue. (Examples of such pages include page table
pages, pv entry pages, and uma small alloc pages.)
is actually being added to the hold queue, not the free queue. At the same
time, avoid unnecessary tests to wake up threads waiting for free memory
and the idle thread that zeroes free pages. (These tests will be performed
later when the page finally moves from the hold queue to the free queue.)
boot by MD code to indicated detected alignment preference. Rather than
cache alignment being encoded in UMA consumers by defining a global
alignment value of (16 - 1) in UMA_ALIGN_CACHE, UMA_ALIGN_CACHE is now
a special value (-1) that causes UMA to look at registered alignment. If
no preferred alignment has been selected by MD code, a default alignment
of (16 - 1) will be used.
Currently, no hardware platforms specify alignment; architecture
maintainers will need to modify MD startup code to specify an alignment
if desired. This must occur before initialization of UMA so that all UMA
zones pick up the requested alignment.
Reviewed by: jeff, alc
Submitted by: attilio
- Restore support for fetching swap information from crash dumps via
kvm_get_swapinfo(3) to fix pstat -T/-s on crash dumps.
Reviewed by: arch@, phk
MFC after: 1 week
zone. Cluster allocations fail when this happens. Also processes that may have
blocked on cluster allocations will never be woken up. Thanks to rwatson for
an overview of the issue and pointers to the mbuma paper and his tool to dump
out UMA zones.
Reviewed by: andre@
maxpages on a zone is woken up, with the rest never being woken up as
a result of the ZFLAG_FULL flag being cleared. Wakeup all such blocked
procsses instead. This change introduces a thundering herd, but since
this should be relatively infrequent, optimizing this (by introducing
a count of blocked processes, for example) may be premature.
Reviewd by: ups@
setrunqueue() was mostly empty. The few asserts and thread state
setting were moved to the individual schedulers. sched_add() was
chosen to displace it for naming consistency reasons.
- Remove adjustrunqueue, it was 4 lines of code that was ifdef'd to be
different on all three schedulers where it was only called in one place
each.
- Remove the long ifdef'd out remrunqueue code.
- Remove the now redundant ts_state. Inspect the thread state directly.
- Don't set TSF_* flags from kern_switch.c, we were only doing this to
support a feature in one scheduler.
- Change sched_choose() to return a thread rather than a td_sched. Also,
rely on the schedulers to return the idlethread. This simplifies the
logic in choosethread(). Aside from the run queue links kern_switch.c
mostly does not care about the contents of td_sched.
Discussed with: julian
- Move the idle thread loop into the per scheduler area. ULE wants to
do something different from the other schedulers.
Suggested by: jhb
Tested on: x86/amd64 sched_{4BSD, ULE, CORE}.
allocations were made using improper flags in interrupt context.
Replace with a simple WITNESS warning call. This restores the
invariant that M_WAITOK allocations will always succeed or die
horribly trying, which is relied on by many UMA consumers.
MFC after: 3 weeks
Discussed with: jhb
- Add a printf in swp_pager_meta_build() to warn if the swapzone becomes
exhausted so that there's at least a warning before a box that runs out
of swapzone space before running out of swap space deadlocks.
MFC after: 1 week
Reviwed by: alc
Make part of John Birrell's KSE patch permanent..
Specifically, remove:
Any reference of the ksegrp structure. This feature was
never fully utilised and made things overly complicated.
All code in the scheduler that tried to make threaded programs
fair to unthreaded programs. Libpthread processes will already
do this to some extent and libthr processes already disable it.
Also:
Since this makes such a big change to the scheduler(s), take the opportunity
to rename some structures and elements that had to be moved anyhow.
This makes the code a lot more readable.
The ULE scheduler compiles again but I have no idea if it works.
The 4bsd scheduler still reqires a little cleaning and some functions that now do
ALMOST nothing will go away, but I thought I'd do that as a separate commit.
Tested by David Xu, and Dan Eischen using libthr and libpthread.
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.
This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA
it introduced a check after the call to file system's get pages method
that assumes that the get pages method does not change the array of pages
that is passed to it. In the case of vnode_pager_generic_getpages(),
this assumption has been incorrect. The contents of the array of pages
may be shifted by vnode_pager_generic_getpages(). Likely, the problem
has been hidden by vnode_pager_haspage() limiting the set of pages that
are passed to vnode_pager_generic_getpages() such that a shift never
occurs.
The fix implemented herein is to adjust the pointer to the array of pages
rather than shifting the pages within the array.
MFC after: 3 weeks
Fix suggested by: tegge
an error returned by VOP_BMAP() and a hole in the file.
Change the callers to vnode_pager_addr() such that they return
VM_PAGER_ERROR when VOP_BMAP fails instead of a zero-filled page.
Reviewed by: tegge
MFC after: 3 weeks
size aligned requiring heavy usage of vm_page_alloc_contig
This change makes vm_page_alloc_contig SMP safe
Approved by: scottl (acting as backup for mentor rwatson)
vnode_pager_generic_getpages(): (1) that VOP_BMAP() is unsupported by the
underlying file system and (2) an error in performing the VOP_BMAP().
Previously, vnode_pager_generic_getpages() assumed that all errors were
of the first type. If, in fact, the error was of the second type, the
likely outcome was for the process to become permanently blocked on a busy
page.
MFC after: 3 weeks
Reviewed by: tegge
inlined and a procedure call is made in the rare case, i.e., when it is
necessary to sleep. In this case, inlining the test actually makes the
kernel smaller.
page queues-synchronized flag. Reduce the scope of the page queues lock in
vm_fault() accordingly.
Move vm_fault()'s call to vm_object_set_writeable_dirty() outside of the
scope of the page queues lock. Reviewed by: tegge
Additionally, eliminate an unnecessary dereference in computing the
argument that is passed to vm_object_set_writeable_dirty().
synchronized by the lock on the object containing the page.
Transition PG_WANTED and PG_SWAPINPROG to use the new field,
eliminating the need for holding the page queues lock when setting
or clearing these flags. Rename PG_WANTED and PG_SWAPINPROG to
VPO_WANTED and VPO_SWAPINPROG, respectively.
Eliminate the assertion that the page queues lock is held in
vm_page_io_finish().
Eliminate the acquisition and release of the page queues lock
around calls to vm_page_io_finish() in kern_sendfile() and
vfs_unbusy_pages().
Originally, I had adopted sparc64's name, pmap_clear_write(), for the
function that is now pmap_remove_write(). However, this function is more
like pmap_remove_all() than like pmap_clear_modify() or
pmap_clear_reference(), hence, the name change.
The higher-level rationale behind this change is described in
src/sys/amd64/amd64/pmap.c revision 1.567. The short version is that I'm
trying to clean up and fix our support for execute access.
Reviewed by: marcel@ (ia64)
system's machine-dependent and machine-independent layers. Once
pmap_clear_write() is implemented on all of our supported
architectures, I intend to replace all calls to pmap_page_protect() by
calls to pmap_clear_write(). Why? Both the use and implementation of
pmap_page_protect() in our virtual memory system has subtle errors,
specifically, the management of execute permission is broken on some
architectures. The "prot" argument to pmap_page_protect() should
behave differently from the "prot" argument to other pmap functions.
Instead of meaning, "give the specified access rights to all of the
physical page's mappings," it means "don't take away the specified
access rights from all of the physical page's mappings, but do take
away the ones that aren't specified." However, owing to our i386
legacy, i.e., no support for no-execute rights, all but one invocation
of pmap_page_protect() specifies VM_PROT_READ only, when the intent
is, in fact, to remove only write permission. Consequently, a
faithful implementation of pmap_page_protect(), e.g., ia64, would
remove execute permission as well as write permission. On the other
hand, some architectures that support execute permission have
basically ignored whether or not VM_PROT_EXECUTE is passed to
pmap_page_protect(), e.g., amd64 and sparc64. This change represents
the first step in replacing pmap_page_protect() by the less subtle
pmap_clear_write() that is already implemented on amd64, i386, and
sparc64.
Discussed with: grehan@ and marcel@
pointer: When vm_object_deallocate() sleeps because of a non-zero
paging in progress count on either object or object's shadow,
vm_object_deallocate() must ensure that object is still the shadow's
backing object when it reawakens. In fact, object may have been
deallocated while vm_object_deallocate() slept. If so, reacquiring
the lock on object can lead to a deadlock.
Submitted by: ups@
MFC after: 3 weeks
libmemstat(3) is used by vmstat (and friends) to produce more accurate
and more detailed statistics information in a machine-readable way,
and vmstat continues to provide the same text-based front-end.
This change should not be MFC'd.
vm_page_startup(). As a result, we now only lookup the tunable once
instead of looking it up once for every physical page of memory in the
system. This cuts out about a 1 second or so delay in boot on x86
systems. The delay is much larger and more noticable on sun4v apparently.
Reported by: kmacy
MFC after: 1 week
There is a race with the current locking scheme and removing
it should have no measurable performance impact.
This fixes page faults leading to panics in pmap_enter_quick_locked()
on amd64/i386.
Reviewed by: alc,jhb,peter,ps
Found mapped cache page. Specifically, if cnt.v_free_count dips below
cnt.v_free_reserved after p_start has been set to a non-NULL value,
then vm_map_pmap_enter() would break out of the loop and incorrectly
call pmap_enter_object() for the remaining address range. To correct
this error, this revision truncates the address range so that
pmap_enter_object() will not map any cache pages.
In collaboration with: tegge@
Reported by: kris@
These pages are allocated from the direct map, and were not previous
tracked. This included the vm_page_array and the early UMA bootstrap
pages.
Reviewed by: peter
vmspace_exitfree() and vmspace_free() which could result in the same
vmspace being freed twice.
Factor out part of exit1() into new function vmspace_exit(). Attach
to vmspace0 to allow old vmspace to be freed earlier.
Add new function, vmspace_acquire_ref(), for obtaining a vmspace
reference for a vmspace belonging to another process. Avoid changing
vmspace refcount from 0 to 1 since that could also lead to the same
vmspace being freed twice.
Change vmtotal() and swapout_procs() to use vmspace_acquire_ref().
Reviewed by: alc
report this as an allocation failure for the item type. The failure
will be separately recorded with the bucket type. This my eliminate
high mbuf allocation failure counts under some circumstances, which
can be alarming in appearance, but not actually a problem in
practice.
MFC after: 2 weeks
Reported by: ps, Peter J. Blok <pblok at bsd4all dot org>,
OxY <oxy at field dot hu>,
Gabor MICSKO <gmicskoa at szintezis dot hu>
via the debug.minidump sysctl and tunable.
Traditional dumps store all physical memory. This was once a good thing
when machines had a maximum of 64M of ram and 1GB of kvm. These days,
machines often have many gigabytes of ram and a smaller amount of kvm.
libkvm+kgdb don't have a way to access physical ram that is not mapped
into kvm at the time of the crash dump, so the extra ram being dumped
is mostly wasted.
Minidumps invert the process. Instead of dumping physical memory in
in order to guarantee that all of kvm's backing is dumped, minidumps
instead dump only memory that is actively mapped into kvm.
amd64 has a direct map region that things like UMA use. Obviously we
cannot dump all of the direct map region because that is effectively
an old style all-physical-memory dump. Instead, introduce a bitmap
and two helper routines (dump_add_page(pa) and dump_drop_page(pa)) that
allow certain critical direct map pages to be included in the dump.
uma_machdep.c's allocator is the intended consumer.
Dumps are a custom format. At the very beginning of the file is a header,
then a copy of the message buffer, then the bitmap of pages present in
the dump, then the final level of the kvm page table trees (2MB mappings
are expanded into a 4K page mappings), then the sparse physical pages
according to the bitmap. libkvm can now conveniently access the kvm
page table entries.
Booting my test 8GB machine, forcing it into ddb and forcing a dump
leads to a 48MB minidump. While this is a best case, I expect minidumps
to be in the 100MB-500MB range. Obviously, never larger than physical
memory of course.
minidumps are on by default. It would want be necessary to turn them off
if it was necessary to debug corrupt kernel page table management as that
would mess up minidumps as well.
Both minidumps and regular dumps are supported on the same machine.
if the specified priority is zero. This avoids a race where the calling
thread could read a snapshot of it's current priority, then a different
thread could change the first thread's priority, then the original thread
would call sched_prio() inside msleep() undoing the change made by the
second thread. I used a priority of zero as no thread that calls msleep()
or tsleep() should be specifying a priority of zero anyway.
The various places that passed 'curthread->td_priority' or some variant
as the priority now pass 0.
