is synchronizing data that is out of date on the local component, we
should not send G_GATE_CMD_DONE acknowledge to the kernel.
This fixes the issue, observed in async mode, when on synchronization
from the remote component the worker terminated with "G_GATE_CMD_DONE
failed" error.
Reported by: Artem Kajalainen <artem kayalaynen ru>
Reviewed by: pjd
MFC after: 1 week
Nextboot(8) can now set any combination of kernel name (-k), kernel
options (-o), and environment strings (-e). As a result of this change
-k also becomes optional.
Reviewed by: freebsd-current (Ian Lepore, pluknet@, jhb@)
by removing the ordering requirements and adding more descriptive error
messages; it also makes it more readable and maintainable.
Sponsored by: The FreeBSD Foundation
data changes.
cam_ccb.h: Add a new advanced information type, CDAI_TYPE_RCAPLONG,
for long read capacity data.
cam_xpt_internal.h:
Add a read capacity data pointer and length to struct cam_ed.
cam_xpt.c: Free the read capacity buffer when a device goes away.
While we're here, make sure we don't leak memory for other
malloced fields in struct cam_ed.
scsi_all.c: Update the scsi_read_capacity_16() to take a uint8_t * and
a length instead of just a pointer to the parameter data
structure. This will hopefully make this function somewhat
immune to future changes in the parameter data.
scsi_all.h: Add some extra bit definitions to struct
scsi_read_capacity_data_long, and bump up the structure
size to the full size specified by SBC-3.
Change the prototype for scsi_read_capacity_16().
scsi_da.c: Register changes in read capacity data with the transport
layer. This allows the transport layer to send out an
async notification to interested parties. Update the
dasetgeom() API.
Use scsi_extract_sense_len() instead of
scsi_extract_sense().
scsi_xpt.c: Add support for the new CDAI_TYPE_RCAPLONG advanced
information type.
Make sure we set the physpath pointer to NULL after freeing
it. This allows blindly freeing it in the struct cam_ed
destructor.
sys/param.h: Bump __FreeBSD_version from 1000005 to 1000006 to make it
easier for third party drivers to determine that the read
capacity data async notification is available.
camcontrol.c,
mptutil/mpt_cam.c:
Update these for the new scsi_read_capacity_16() argument
structure.
Sponsored by: Spectra Logic
we will only trust a positive name cache entry for a specified amount of
time before falling back to a LOOKUP RPC, even if the ctime for the file
handle matches the cached copy in the name cache entry. The timeout is
configured via a new 'nametimeo' mount option and defaults to 60 seconds.
It may be set to zero to disable positive name caching entirely.
Reviewed by: rmacklem
MFC after: 1 week
file for hastd(8) and hastctl(8) and not hast.conf.
- In copyright statement correct that this file is documentation, not software.
- Bump date.
MFC after: 3 days
reduce the size of the partition in the example from 128 blocks to 94
blocks so it will end on a 128-block boundary. Also remove the -b
option from the next example.
MFC after: 3 weeks
recoverdisk(1) wants to know about read errors when doing the 1MB/64k
reads as fast as possible so it can continue and retry them later with
smaller reads (down to sector size). Any retries by lower layers will
only slow it down.
Prodded by: arundel
reality:
1. Only 12-bit VLAN Identifiers, not full 16-bit VLAN tags can be set using
ifconfig vlan.
2. When we mean VLAN Identifiers, spell it that way, rather than as VLAN tag.
MFC after: 3 days
Sponsored by: Adara Networks, Inc.
The index() and rindex() functions were marked LEGACY in the 2001
revision of POSIX and were subsequently removed from the 2008 revision.
The strchr() and strrchr() functions are part of the C standard.
This makes the source code a lot more consistent, as most of these C
files also call into other str*() routines. In fact, about a dozen
already perform strchr() calls.
writing label into a file image. The most common use - putting disklabel
into ISO file. Before this change the label would always go to
the offset 512, while geom_part code expects it to be in the 1st
sector (i.e. 2048 incase of ISO). BSD disklabels provide good and
lightweight way to logically split livecds. It is non-intrusive as
far as ISO9660 goes (both boot-wise and metadata-wise) and
completely transparent to anything but BSD, so you can have
BSD-specific area appended after regular ISO.
And with a little bit of GEOM trickery you can do even more
interesting stuff with it.
For example we make "hybrid" bootable CDs using this method.
We create bootable ISO with kernel and such and append UFS
image compressed with UZIP and it works like a charm. We put
label based on the offsef of the BSD part into the ISO. The kernel
boots off normal ISO9660 part, tastes label attaches it,
tastes UZIP, attaches it and finally mounts UFS using GEOM_LABEL.
This provides much better way of eliminating waste than doing
"crunched" build.
MFC after: 1 month
In the original Domain Search option patch, an invalid option value
would cause the whole lease to be rejected. However, DHCP servers who
emit such an invalid value are more common than I thought. With this new
patch, just the option is rejected, not the entire lease.
PR: bin/163431
Submitted by: Fabian Keil <fk@fabiankeil.de> (earlier version)
Reviewed by: Fabian Keil <fk@fabiankeil.de>
Sponsored by: Yakaz (http://www.yakaz.com)
the now default 32K/4K filesystem the same as the number of inodes in
the previously default 16K/2K filesystem.
PR: bin/16265
Reported by: Olivier Cochard-Labbe <olivier@cochard.me>
MFC: 4 weeks (9 is the only affected branch)
Remove C99 initializers: they don't help in this case.
Set errno to 0 before strtoll() (from NetBSD).
PR: 151850
Suggested by: bde
Approved by: jhb (Mentor)
MFC after: 2 weeks
from scratch, copying needed functionality from the old implemenation
on demand, with a thorough review of all code. The main change is that
interface layer has been removed from the CARP. Now redundant addresses
are configured exactly on the interfaces, they run on.
The CARP configuration itself is, as before, configured and read via
SIOCSVH/SIOCGVH ioctls. A new prefix created with SIOCAIFADDR or
SIOCAIFADDR_IN6 may now be configured to a particular virtual host id,
which makes the prefix redundant.
ifconfig(8) semantics has been changed too: now one doesn't need
to clone carpXX interface, he/she should directly configure a vhid
on a Ethernet interface.
To supply vhid data from the kernel to an application the getifaddrs(8)
function had been changed to pass ifam_data with each address. [1]
The new implementation definitely closes all PRs related to carp(4)
being an interface, and may close several others. It also allows
to run a single redundant IP per interface.
Big thanks to Bjoern Zeeb for his help with inet6 part of patch, for
idea on using ifam_data and for several rounds of reviewing!
PR: kern/117000, kern/126945, kern/126714, kern/120130, kern/117448
Reviewed by: bz
Submitted by: bz [1]
that changed 0.0.0.0/0.0.0.0 prefix to 0.0.0.0/255.0.0.0.
In the r228313 this behavior was fixed, and since dhclient-script
got broken.
I'm not sure this fix is a perfect one, it just changes
dhclient-script to set 0.0.0.0/255.0.0.0 explicitly.
PR: kern/163206
This tool only consists of a single C file, so we can simply mark
everything except main() static. This seems to shave off about 8% of the
binary size.
The global variables and functions provided by rcorder.c are not used in
the other C files, as the other C files only provide memory allocation
and hash functions. This reduces the binary size by 10%.
The "domain-search" option (option 119) allows a DHCP server to publish
a list of implicit domain suffixes used during name lookup. This option
is described in RFC 3397.
For instance, if the domain-search option says:
".example.org .example.com"
and one wants to resolve "foobar", the resolver will try:
1. "foobar.example.org"
2. "foobar.example.com"
The file /etc/resolv.conf is updated with a "search" directive if the
DHCP server provides "domain-search".
A regression test suite is included in this patch under
tools/regression/sbin/dhclient.
PR: bin/151940
Sponsored by Yakaz (http://www.yakaz.com)
Firmware can be reprogrammed on devices from Hitachi, HP, IBM, Plextor,
Quantum, and Seagate. At least one device from each manufacturer has
been tested with some version of this code, and it has been used to
update thousands of drives so far.
The man page suggests having a backup of the drive's data, and the
operation must be confirmed, either interactively or on the command
line. (This is the same as the confirmation on the format command.)
This work is largely derived from fwprog.c by Andre Albsmeier.
Submitted by: Nima Misaghian
Sponsored by: Sandvine Incorporated
MFC after: 3 months
existing sections to refer to the new one. Rearrange partitioning scheme
list so MBR and EBR types are together. Also add several corrections for
grammar, clarity, and consistency.
Approved by: gjb (mentor)
MFC after: 1 week
- Improved locking and destruction process to fix crashes.
- Improved "automatic" configuration method to make it consistent and safe
by reading metadata back from all specified paths after writing to one.
- Added provider size check to reduce chance of ordering conflict with
other GEOM classes.
- Added "manual" configuration method without using on-disk metadata.
- Added "add" and "remove" commands to allow manage paths manually.
- Failed paths are no longer dropped from geom, but only marked as FAIL
and excluded from I/O operations.
- Automatically restore failed paths when all others paths are marked
as failed, for example, because of device-caused (not transport) errors.
- Added "fail" and "restore" commands to manually control FAIL flag.
- geom is now destroyed on last path disconnection.
- Added optional Active/Active mode support. Unlike Active/Passive
mode, load evenly distributed between all working paths. If supported by
the device, it allows to significantly improve performance, utilizing
bandwidth of all paths. It is controlled by -A option during creation.
Disabled by default now.
- Improved `status` and `list` commands output.
Sponsored by: iXsystems, inc.
MFC after: 1 month
change the on-disk format in an incompatible way. Without this change,
msdosfs created on FreeBSD/arm would not be mountable.
PR: bin/162486
Submitted by: Ian Lepore <freebsd damnhippie dyndns org>
Reported by: Mattia Rossi <mrossi at swin.edu.au>
MFC after: 3 days
This allows a hostap to specify to a set of stations that they
should not transmit for a certain period of time after each
beacon interval has expired. This is used when searching for
radar pulses or general interference.
Submitted by: Himali Patel <himali.patel@sibridgetech.com>
Sponsored by: Sibridge Technologies
Remove obsolete code which uses DIOCSMBR ioctl.
When writing MBR first check that GEOM_MBR is available, if it is not
available, then try write MBR directly to provider. If both are failed,
then recommend to use gpart(8).
MFC after: 2 week
fields, but user could specify some of those fields when edits disklabel
with `bsdlabel -e`. But without -A flag these fields might be
overwritten with default values from the virgin disklabel.
So, don't overwrite such fields if they are not zero. Also add checks
to prevent creating disklabel with less than DEFPARTITIONS and more
than MAXPARTITIONS partitions.
PR: bin/162332
Tested by: Eugene Grosbein
MFC after: 1 week
These tools declare global variables without using the static keyword,
even though their use is limited to a single C-file, or without placing
an extern declaration of them in the proper header file.
write. This way on first connection we will synchronize only the extents that
were modified during the lifetime of primary node, not entire GEOM provider.
MFC after: 3 days
- add support for volumes above 2TiB with Promise metadata format;
- enforse and document other limitations:
- Intel and Promise metadata formats do not support disks above 2TiB;
- NVIDIA metadata format does not support volumes above 2TiB.
Sponsored by: iXsystems, Inc.
MFC after: 2 weeks
the logic (true/false) of the matching.
- Add "!usbus[0-9]+" to IFNET ATTACH notification handler in the default
devd.conf to prevent rc.d/netif from running when usbus[0-9]+ is attached.
Reviewed by: imp
with older FreeBSD versions:
- Add -V option to 'geli init' to specify version number. If no -V is given
the most recent version is used.
- If -V is given don't allow to use features not supported by this version.
- Print version in 'geli list' output.
- Update manual page and add table describing which GELI version is
supported by which FreeBSD version, so one can use it when preparing GELI
device for older FreeBSD version.
Inspired by: Garrett Cooper <yanegomi@gmail.com>
MFC after: 3 days
given GEOM provider or if not providers are given it will print versions
supported by userland geli(8) utility and by ELI GEOM class.
MFC after: 3 days
With the addition of various GEOM layers some device names now exceed
this length, for example /dev/mirror/encrypted.elig.journal. This
change expands the field to 53 bytes which brings the /etc/dumpdates
lines to 80 characters. Exceeding 80 characters makes the /etc/dumpdates
file much less human readable. A test is added to dump so that it
verifies that the device name will fit in the 53 character field
failing the dump if it is too long.
This change has been checked to verify that its /etc/dumpdates file
is compatible with older versions of dump.
Reported by: Martin Sugioarto <martin@sugioarto.com>
PR: kern/160678
MFC after: 3 weeks
zero and thus report as having been made in January 1970. Apart
from looking a bit silly, it also triggers alarms from scripts
that detect weird time stamps. This update sets all 4 (or 3, in
the case of UFS1) time stamps to the current time when enabling
journaling during newfs or later when enabling it with tunefs.
Reported by: Hans Ottevanger <hans@beastielabs.net>
MFC after: 1 week
option is defined. This sysctl can be queried by feature_present(3).
Query for this feature in /sbin/atacontrol and /usr/sbin/burncd.
If these utilities detect that ATA_CAM is enabled, then these utilities
will error out. These utilities are compatible with the old ATA
driver, but are incomptible with the new ATA_CAM driver. By erroring out,
we give end-users an idea as to what remedies to use, and reduce the need for them
to file PR's. For atacontrol, camcontrol must be used instead,
and for burncd, alternative utilties from the ports collection must be used
such as sysutils/cdrtools.
In future, maybe someone can re-write burncd to work with ATA_CAM,
but at least for now, we give a somewhat useful error message to end users.
PR: 160979
Reviewed by: jh, Arnaud Lacombe <lacombar at gmail dot com>
Reported by: Joe Barbish <fbsd8 at a1poweruser dot com>
MFC after: 3 days
CAM.
Desriptor sense is a new sense data format that originated in SPC-3. Among
other things, it allows for an 8-byte info field, which is necessary to
pass back block numbers larger than 4 bytes.
This change adds a number of new functions to scsi_all.c (and therefore
libcam) that abstract out most access to sense data.
This includes a bump of CAM_VERSION, because the CCB ABI has changed.
Userland programs that use the CAM pass(4) driver will need to be
recompiled.
camcontrol.c: Change uses of scsi_extract_sense() to use
scsi_extract_sense_len().
Use scsi_get_sks() instead of accessing sense key specific
data directly.
scsi_modes: Update the control mode page to the latest version (SPC-4).
scsi_cmds.c,
scsi_target.c: Change references to struct scsi_sense_data to struct
scsi_sense_data_fixed. This should be changed to allow the
user to specify fixed or descriptor sense, and then use
scsi_set_sense_data() to build the sense data.
ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data
manually.
cam_periph.c: Use scsi_extract_sense_len() instead of using
scsi_extract_sense() or accessing sense data directly.
cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of
struct scsi_sense_data from 32 to 252 bytes changes the
size of struct ccb_scsiio, but not the size of union ccb.
So the version must be bumped to prevent structure
mis-matches.
scsi_all.h: Lots of updated SCSI sense data and other structures.
Add function prototypes for the new sense data functions.
Take out the inline implementation of scsi_extract_sense().
It is now too large to put in a header file.
Add macros to calculate whether fields are present and
filled in fixed and descriptor sense data
scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry
data, and we'll assume a direct access device in that case.
Changed the SCSI RESERVED sense key name and description
to COMPLETED, as it is now defined in the spec.
Change the error recovery action for a number of read errors
to prevent lots of retries when the drive has said that the
block isn't accessible. This speeds up reconstruction of
the block by any RAID software running on top of the drive
(e.g. ZFS).
In scsi_sense_desc(), allow for invalid sense key numbers.
This allows calling this routine without checking the input
values first.
Change scsi_error_action() to use scsi_extract_sense_len(),
and handle things when invalid asc/ascq values are
encountered.
Add a new routine, scsi_desc_iterate(), that will call the
supplied function for every descriptor in descriptor format
sense data.
Add scsi_set_sense_data(), and scsi_set_sense_data_va(),
which build descriptor and fixed format sense data. They
currently default to fixed format sense data.
Add a number of scsi_get_*() functions, which get different
types of sense data fields from either fixed or descriptor
format sense data, if the data is present.
Add a number of scsi_*_sbuf() functions, which print
formatted versions of various sense data fields. These
functions work for either fixed or descriptor sense.
Add a number of scsi_sense_*_sbuf() functions, which have a
standard calling interface and print the indicated field.
These functions take descriptors only.
Add scsi_sense_desc_sbuf(), which will print a formatted
version of the given sense descriptor.
Pull out a majority of the scsi_sense_sbuf() function and
put it into scsi_sense_only_sbuf(). This allows callers
that don't use struct ccb_scsiio to easily utilize the
printing routines. Revamp that function to handle
descriptor sense and use the new sense fetching and
printing routines.
Move scsi_extract_sense() into scsi_all.c, and implement it
in terms of the new function, scsi_extract_sense_len().
The _len() version takes a length (which should be the
sense length - residual) and can indicate which fields are
present and valid in the sense data.
Add a couple of new scsi_get_*() routines to get the sense
key, asc, and ascq only.
mly.c: Rename struct scsi_sense_data to struct
scsi_sense_data_fixed.
sbp_targ.c: Use the new sense fetching routines to get sense data
instead of accessing it directly.
sbp.c: Change the firewire/SCSI sense data transformation code to
use struct scsi_sense_data_fixed instead of struct
scsi_sense_data. This should be changed later to use
scsi_set_sense_data().
ciss.c: Calculate the sense residual properly. Use
scsi_get_sense_key() to fetch the sense key.
mps_sas.c,
mpt_cam.c: Set the sense residual properly.
iir.c: Use scsi_set_sense_data() instead of building sense data by
hand.
iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data
directly.
umass.c: Use scsi_set_sense_data() to build sense data.
Grab the sense key using scsi_get_sense_key().
Calculate the sense residual properly.
isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key
values.
Calculate and set the sense residual.
MFC after: 3 days
Sponsored by: Spectra Logic Corporation
As of FreeBSD 6, devices can only be opened through devfs. These device
nodes don't have major and minor numbers anymore. The st_rdev field in
struct stat is simply based a copy of st_ino.
Simply display device numbers as hexadecimal, using "%#jx". This is
allowed by POSIX, since it explicitly states things like the following
(example taken from ls(1)):
"If the file is a character special or block special file, the
size of the file may be replaced with implementation-defined
information associated with the device in question."
This makes the output of these commands more compact. For example, ls(1)
now uses approximately four columns less. While there, simplify the
column length calculation from ls(1) by calling snprintf() with a NULL
buffer.
Don't be afraid; if needed one can still obtain individual major/minor
numbers using stat(1).
reordering won't make the actual write to be committed before marking
the coresponding extent as dirty.
It can be disabled in configuration file.
If BIO_FLUSH is not supported by the underlying file system we log a warning
and never send BIO_FLUSH again to that GEOM provider.
MFC after: 3 days
on a disk with non zero stripesize (e.g. disks with 4k sector size)[1].
Also do not use automatic alignment when size is exactly specified, but
an alignment is not. Use automatic alignment only for case when user
omits both "-s" and "-a" options.
Reported by: Mikael Fridh <frimik at gmail> [1]
Approved by: re (kib)
MFC after: 1 week
options don't leak over into subsequent mounts listed in /etc/fstab.
While here, fix a memory leak in debug mode.
Reported by: rank1seeker @ gmail
Approved by: re (kib)
MFC after: 1 week
The value of namlen is copied from on-disk d_namlen, which is a 8-bit
unsigned integer which can never exceed MAXNAMLEN (255) so the test is
always true. Moreover, UFS does not allow d_namelen being zero.
Change namlen from u_int to u_int8_t, and replace the unneeded test
with a useful test.
PR: bin/160339
Submitted by: Eugene Grosbein <eugen grosbein.pp.ru>
MFC after: 2 weeks
Approved by: re (kib)
Distinguish IPv4 and IPv6 addresses and optional port numbers in
user space to set the option for the correct protocol family.
Add support in the kernel for carrying the new IPv6 destination
address and port.
Add support to TCP and UDP for IPv6 and fix UDP IPv4 to not change
the address in the IP header.
Add support for IPv6 forwarding to a non-local destination.
Add a regession test uitilizing VIMAGE to check all 20 possible
combinations I could think of.
Obtained from: David Dolson at Sandvine Incorporated
(original version for ipfw fwd IPv6 support)
Sponsored by: Sandvine Incorporated
PR: bin/117214
MFC after: 4 weeks
Approved by: re (kib)
maximum value instead of number of bits. But for case when
limitation is not needed it erroneously skips conversion to
number and always returns zero. So, don't skip conversion
for case when limitation is not needed.
PR: bin/159765
Approved by: re (kib)
bootstrap code images used to boot from MBR, GPT, BSD and VTOC8
schemes.
Reviewed by: marius (previous version)
Approved by: re (kib)
MFC after: 1 week
based on the patch in the PR, however he was unaware that they were
undocumented intentionally. This patch moves the information about
these alternates into a comment which also explains why they are
undocumented.
Approved by: re (hrs)
so that it is visible to userland programs. This change enables
the `mount' command with no arguments to be able to show if a
filesystem is mounted using journaled soft updates as opposed
to just normal soft updates.
Approved by: re (bz)
on frequency bands with DFS. All Atheros chipsets >= AR9001 support
radar event detection on HT40 extension channels.
This should be a chipset specific item rather than enforced in the
regulatory domain database.
In addition, it's irrelevant for STA mode, as the radar detection is
done by the access point, not the STA.
Approved by: re (kib)
list channel' is run. The following new options are introduced:
* D: channel requires DFS
* R: channel has a radar event
* I: channel has detected inteference
* C: the CAC period has completed on a channel that requires it (ie,
DFS + PASSIVE.)
It's relevant for developing, debugging and using the DFS and
interference options.
Approved by: re (bz)
a /rescue/ifconfig more modern than the kernel could still configure
IPv4 or IPv6 addresses.
Reported by: Andrzej Tobola (ato iem.pw.edu.pl)
Reported by: gcooper
MFC after: 1 day
X-MFC: will not MFC any time soon, just reminder for r222527
fdisk(1) internally uses a signed int. Should a user attempt to specify
a slice containing more than 2^31 - 1 sectors, an error will be reported
on systems with sizeof(long) == 4 and the slice size will be silently
truncated on systems with sizeof(long) > 4.
Instead use an unsigned long to store the slice size in fdisk(1). This
allows the user to specify a slice size up to the maximum permitted by
the MBR on-disk format and does not have any problems with silent
truncation should the use specify an slice size larger than 2^32 on systems
with sizeof(long) > 4.
Submitted by: Mark Johnston (markjdb AT gmail DOT com)
MFC after: 2 weeks
to be assigned to a non-default FIB instance.
You may need to recompile world or ports due to the change of struct ifnet.
Submitted by: cjsp
Submitted by: Alexander V. Chernikov (melifaro ipfw.ru)
(original versions)
Reviewed by: julian
Reviewed by: Alexander V. Chernikov (melifaro ipfw.ru)
MFC after: 2 weeks
X-MFC: use spare in struct ifnet
possible to organize subroutines with rules.
The "call" action saves the current rule number in the internal
stack and rules processing continues from the first rule with
specified number (similar to skipto action). If later a rule with
"return" action is encountered, the processing returns to the first
rule with number of "call" rule saved in the stack plus one or higher.
Submitted by: Vadim Goncharov
Discussed by: ipfw@, luigi@
disk if needed. This should fix a potential case when extents are cleared in
activemap but metadata is not updated on disk.
Suggested by: pjd
Approved by: pjd (mentor)
stating if we need to update activemap on disk. This makes keepdirty
serve its purpose -- to reduce number of metadata updates.
Discussed with: pjd
Approved by: pjd (mentor)
gpart_write_partcode_vtoc8 does access out of range of allocated memory.
Check size of bootcode before writing it.
Pointed out by: ru
MFC after: 1 week
applicable here, since modifies the string. Switch to strchr().
- Restore support for undocumented optional parameters of
redir_port and redir_proto, that were disabled in 220835.
- While here, change !isalpha() checks on optinal parameters
for isdigit().
Submitted by: Alexander V. Chernikov <melifaro ipfw.ru>
PR: kern/143653
only receiving the data. In r220271 the unused directions were
disabled using shutdown(2).
Unfortunately, this broke automatic receive buffer sizing, which
currently works only for connections in ETASBLISHED state. It was a
root cause of the issue reported by users, when connection between
primary and secondary could get stuck.
Disable the code introduced in r220271 until the issue with automatic
buffer sizing is not resolved.
Reported by: Daniel Kalchev <daniel@digsys.bg>, danger, sobomax
Tested by: Daniel Kalchev <daniel@digsys.bg>, danger
Approved by: pjd (mentor)
MFC after: 1 week
other device attributes stored in the CAM Existing Device Table (EDT).
This includes some infrastructure requried by the enclosure services
driver to export physical path information.
Make the CAM device advanced info interface accept store requests.
sys/cam/scsi/scsi_all.c:
sys/cam/scsi/scsi_all.h:
- Replace scsi_get_sas_addr() with a scsi_get_devid() which takes
a callback that decides whether to accept a particular descriptor.
Provide callbacks for NAA IEEE Registered addresses and for SAS
addresses, replacing the old function. This is needed because
the old function doesn't work for an enclosure address for a SAS
device, which is not flagged as a SAS address, but is NAA IEEE
Registered. It may be worthwhile merging this interface with the
devid match interface.
- Add a few more defines for some device ID fields.
sbin/camcontrol/camcontrol.c:
- Update for the CCB_DEV_ADVINFO interface change.
cam/cam_xpt_internal.h:
- Add the new fields for the physical path string to the CAM EDT.
cam/cam_ccb.h:
- Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb
structure to ccb_dev_advinfo.
- Add a flag that changes this CCB's action to store, rather than
the default, retrieve.
- Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT
physpath field.
- Remove the never-implemented transport & proto flags.
cam/cam_xpt.c:
cam/cam_xpt.h:
- Add xpt_getattr(), which provides a wrapper for fetching a device's
attribute using the GEOM strings as key. This method currently
supports "GEOM::ident" and "GEOM::physpath".
Submitted by: will
Reviewed by : gibbs
Extend the XPT_DEV_MATCH api to allow a device search by device ID.
As far as the API is concerned, device ID is a binary blob to be
interpreted by the transport layer. The SCSI implementation assumes
it is an array of VPD device ID descriptors.
sys/cam/cam_ccb.h:
Create a new structure, device_id_match_pattern, and
update the XPT_DEV_MATCH datastructures and flags so
that this pattern type can be used.
sys/cam/cam_xpt.c:
- A single pattern matching on both inquiry data and device
ID is invalid. Report any violators.
- Pass device ID match requests through to the new routine
scsi_devid_match(). The direct call of a SCSI routine is
a layering violation, but no worse than the one a few
lines up that checks inquiry data. Defer cleaning this
up until our future, larger, rototilling of CAM.
- Zero out cam_ed and cam_et nodes on allocation. Prior to
this change, device_id_len and device_id were not inialized,
preventing proper detection of the presence of this
information.
sys/cam/scsi/scsi_all.c:
sys/cam/scsi/scsi_all.h:
Add the scsi_match_devid() routine.
Add a helper function for extracting peripherial driver names
sys/cam/cam_periph.c:
sys/cam/cam_periph.h:
Add the cam_periph_list() method which fills an sbuf
with a comma delimited list of the peripheral instances
associated with a given CAM path.
Add a helper functions for SCSI commands used by the SES driver.
sys/cam/scsi/scsi_all.c:
sys/cam/scsi/scsi_all.h:
Add structure definitions and csio filling functions for
the receive diagnostic results and send diagnostic commands.
Misc CAM XPT cleanups.
sys/cam/cam_xpt.c:
Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED
events at the time async event handlers are attached
even when registering just for events on a partitular
SIM. Previously, you had to register for these
events on all SIMs in the system in order to get
the initial broadcast even though subsequent device
and path arrivals would be delivered.
sys/cam/cam_xpt.c:
Remove SIM mutex held asserts from path accessors.
CAM paths are reference counted and it is this
reference count, not the sim mutex, that garantees
they are stable.
Sponsored by: Spectra Logic Corporation
"globalport" option for multiple NAT instances.
If ipfw rule contains "global" keyword instead of nat_number, then
for each outgoing packet ipfw_nat looks up translation state in all
configured nat instances. If an entry is found, packet aliased
according to that entry, otherwise packet is passed unchanged.
User can specify "skip_global" option in NAT configuration to exclude
an instance from the lookup in global mode.
PR: kern/157867
Submitted by: Alexander V. Chernikov (previous version)
Tested by: Eugene Grosbein
Document the fact that we might want an IFCAP_CANTCHANGE mask,
even though the value is not yet used in sys/net/if.c
(asked on -current a week ago, no feedback so i assume no objection).
to resolve errors which can cause corruption on recovery with the old
synchronous mechanism.
- Append partial truncation freework structures to indirdeps while
truncation is proceeding. These prevent new block pointers from
becoming valid until truncation completes and serialize truncations.
- On completion of a partial truncate journal work waits for zeroed
pointers to hit indirects.
- softdep_journal_freeblocks() handles last frag allocation and last
block zeroing.
- vtruncbuf/ffs_page_remove moved into softdep_*_freeblocks() so it
is only implemented in one place.
- Block allocation failure handling moved up one level so it does not
proceed with buf locks held. This permits us to do more extensive
reclaims when filesystem space is exhausted.
- softdep_sync_metadata() is broken into two parts, the first executes
once at the start of ffs_syncvnode() and flushes truncations and
inode dependencies. The second is called on each locked buf. This
eliminates excessive looping and rollbacks.
- Improve the mechanism in process_worklist_item() that handles
acquiring vnode locks for handle_workitem_remove() so that it works
more generally and does not loop excessively over the same worklist
items on each call.
- Don't corrupt directories by zeroing the tail in fsck. This is only
done for regular files.
- Push a fsync complete record for files that need it so the checker
knows a truncation in the journal is no longer valid.
Discussed with: mckusick, kib (ffs_pages_remove and ffs_truncate parts)
Tested by: pho
the system to proceed to boot without bailing out into single user mode,
even when the file system can not be successfully mounted.
This option is implemented in mount(8) and not passed into kernel.
MFC after: 1 month
When user wants have specific alignment - do what user wants.
Use stripesize as alignment value in case, when some of gpart's
arguments are ommitted for automatic calculation.
Suggested by: mav
chnage is different to the one suggested in the PR to try to avoid
cluttering the man page too much.
PR: docs/154494
Submitted by: kilian <kilian.klimek googlemail.com>
MFC after: 1 week
- A new per-interface knob IFF_ND6_NO_RADR and sysctl IPV6CTL_NO_RADR.
This controls if accepting a route in an RA message as the default route.
The default value for each interface can be set by net.inet6.ip6.no_radr.
The system wide default value is 0.
- A new sysctl: net.inet6.ip6.norbit_raif. This controls if setting R-bit in
NA on RA accepting interfaces. The default is 0 (R-bit is set based on
net.inet6.ip6.forwarding).
Background:
IPv6 host/router model suggests a router sends an RA and a host accepts it for
router discovery. Because of that, KAME implementation does not allow
accepting RAs when net.inet6.ip6.forwarding=1. Accepting RAs on a router can
make the routing table confused since it can change the default router
unintentionally.
However, in practice there are cases where we cannot distinguish a host from
a router clearly. For example, a customer edge router often works as a host
against the ISP, and as a router against the LAN at the same time. Another
example is a complex network configurations like an L2TP tunnel for IPv6
connection to Internet over an Ethernet link with another native IPv6 subnet.
In this case, the physical interface for the native IPv6 subnet works as a
host, and the pseudo-interface for L2TP works as the default IP forwarding
route.
Problem:
Disabling processing RA messages when net.inet6.ip6.forwarding=1 and
accepting them when net.inet6.ip6.forward=0 cause the following practical
issues:
- A router cannot perform SLAAC. It becomes a problem if a box has
multiple interfaces and you want to use SLAAC on some of them, for
example. A customer edge router for IPv6 Internet access service
using an IPv6-over-IPv6 tunnel sometimes needs SLAAC on the
physical interface for administration purpose; updating firmware
and so on (link-local addresses can be used there, but GUAs by
SLAAC are often used for scalability).
- When a host has multiple IPv6 interfaces and it receives multiple RAs on
them, controlling the default route is difficult. Router preferences
defined in RFC 4191 works only when the routers on the links are
under your control.
Details of Implementation Changes:
Router Advertisement messages will be accepted even when
net.inet6.ip6.forwarding=1. More precisely, the conditions are as
follow:
(ACCEPT_RTADV && !NO_RADR && !ip6.forwarding)
=> Normal RA processing on that interface. (as IPv6 host)
(ACCEPT_RTADV && (NO_RADR || ip6.forwarding))
=> Accept RA but add the router to the defroute list with
rtlifetime=0 unconditionally. This effectively prevents
from setting the received router address as the box's
default route.
(!ACCEPT_RTADV)
=> No RA processing on that interface.
ACCEPT_RTADV and NO_RADR are per-interface knob. In short, all interface
are classified as "RA-accepting" or not. An RA-accepting interface always
processes RA messages regardless of ip6.forwarding. The difference caused by
NO_RADR or ip6.forwarding is whether the RA source address is considered as
the default router or not.
R-bit in NA on the RA accepting interfaces is set based on
net.inet6.ip6.forwarding. While RFC 6204 W-1 rule (for CPE case) suggests
a router should disable the R-bit completely even when the box has
net.inet6.ip6.forwarding=1, I believe there is no technical reason with
doing so. This behavior can be set by a new sysctl net.inet6.ip6.norbit_raif
(the default is 0).
Usage:
# ifconfig fxp0 inet6 accept_rtadv
=> accept RA on fxp0
# ifconfig fxp0 inet6 accept_rtadv no_radr
=> accept RA on fxp0 but ignore default route information in it.
# sysctl net.inet6.ip6.norbit_no_radr=1
=> R-bit in NAs on RA accepting interfaces will always be set to 0.
sending. What happens otherwise is that the sender splits all the
traffic into 32k chunks, while the receiver is waiting for the whole
packet. Then for a certain packet sizes, particularly 66607 bytes in
my case, the communication stucks to secondary is expecting to
read one chunk of 66607 bytes, while primary is sending two chunks
of 32768 bytes and third chunk of 1071. Probably due to TCP windowing
and buffering the final chunk gets stuck somewhere, so neither server
not client can make any progress.
This patch also protect from short reads, as according to the manual
page there are some cases when MSG_WAITALL can give less data than
expected.
MFC after: 3 days
partition offsets. If user requests specific alignment and
provider's stripesize is not zero, then use a least common multiple
from the stripesize and user specified value.
Also fix "gpart resize" implementation: do not try to align the partition
size, because the start offset may be not aligned. Instead align the
end offset and then calculate size. Also use stripesize and stripeoffset
for "gpart resize" command.