Commit Graph

92 Commits

Author SHA1 Message Date
Poul-Henning Kamp
1000b87f2a Remove now unused pointer to etherheader.
Found by:       FlexeLint
2003-05-31 19:56:35 +00:00
Warner Losh
214073e5e4 Use newly minted device_is_attached rather than device_is_alive to see
if attach succeeded.  device_is_alive just tells us that probe
succeeded.  Since we were using it to do things like detach net
interfaces, this caused problems when there were errors in the attach
routine.

Symptoms of problem reported by: martin blapp
2003-04-21 18:34:04 +00:00
Nate Lawson
693f4477b1 Revise attach/detach resource cleanup
- Unconditionally call *_stop() if device is in the tree. This is to
  prevent callouts from happening after the device is gone. Checks for
  bus_child_present() should be added in the future to keep from touching
  potentially non-existent hardware in *_detach().  Found by iedowse@.
- Always check for and free miibus children, even if the device is not in
  the tree since some failure cases could have gotten here.
- Call ether_ifdetach() in the irq setup failure case
- ti(4), xl(4): move ifmedia_init() calls to the beginning of attach so
  that ifmedia_removeall() can be unconditionally called on detach. There
  is no way to detect whether ifmedia has been initialized without using
  a separate variable (as tl(4) does).
- Add comments to indicate assumptions of code path
2003-04-17 20:32:06 +00:00
Matthew N. Dodd
533294b956 - Don't call pci_enable_io() in drivers (unless needed for resume).
- Don't test memory/port status and emit an error message; the PCI
  bus code will do this now.
2003-04-16 03:16:57 +00:00
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
David E. O'Brien
8368cf8f75 Use __FBSDID rather than rcsid[]. 2003-04-03 21:36:33 +00:00
Poul-Henning Kamp
6f46bf604d Fix KASSERT syntax error. 2003-04-01 08:57:28 +00:00
Nate Lawson
54f1f1d1e6 Clean up locking and resource management for pci/if_*
- Remove locking of the softc in the attach method, instead depending on
  bus_setup_intr being at the end of attach (delaying interrupt enable until
  after ether_ifattach is called)
- Call *_detach directly in the error case of attach, depending on checking
  in detach to only free resources that were allocated.  This puts all
  resource freeing in one place, avoiding thinkos that lead to memory leaks.
- Add bus_child_present check to calls to *_stop in the detach method to
  be sure hw is present before touching its registers.
- Remove bzero softc calls since device_t should do this for us.
- dc: move interrupt allocation back where it was before.  It was unnecessary
  to move it.  This reverts part of 1.88
- rl: move irq allocation before ether_ifattach.  Problems might have been
  caused by allocating the irq after enabling interrupts on the card.
- rl: call rl_stop before ether_ifdetach
- sf: call sf_stop before ether_ifdetach
- sis: add missed free of sis_tag
- sis: check errors from tag creation
- sis: move dmamem_alloc and dmamap_load to happen at same time as tag creation
- sk: remove duplicate initialization of sk_dev
- ste: add missed bus_generic_detach
- ti: call ti_stop before ether_ifdetach
- ti: add missed error setting in ti_rdata alloc failure
- vr: add missed error setting in I/O, memory mapping cases
- xl: add missed error setting in I/O, memory mapping cases
- xl: remove multi-level goto on attach failure
- xl: move dmamem_alloc and dmamap_load to happen at same time as tag creation
- Calls to free(9) are unconditional because it is valid to call free with a
  null pointer.

Reviewed by:	imp, mdodd
2003-03-31 17:29:43 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Poul-Henning Kamp
dd7a14618b Spell noread() and nowrite() correctly (ie: not "NULL") 2003-03-02 19:23:31 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Sam Leffler
9ef8b52020 o track either_ifattach/ether_ifdetach API changes
o use if_input for input packet processing
o don't strip the Ethernet header for input packets
o use BPF_* macros bpf tapping
o call ether_ioctl to handle default ioctl case
o track vlan changes

Reviewed by:	many
Approved by:	re
2002-11-14 23:49:09 +00:00
Alfred Perlstein
29f194457c Fix instances of macros with improperly parenthasized arguments.
Verified by: md5
2002-11-09 12:55:07 +00:00
John Baldwin
f47789c828 Use %z to print a size_t value. 2002-11-08 14:58:35 +00:00
Poul-Henning Kamp
2c876e15c8 Be consistent about functions being static.
Spotted by:	FlexeLint.
2002-10-16 09:04:52 +00:00
Alfred Perlstein
780c174bca Static'ify a variable.
Submitted by: Matt Emmerton <matt@gsicomp.on.ca>
2002-10-03 06:44:01 +00:00
Alfred Perlstein
8e708563c7 style: put return types on a line by themselves. 2002-08-24 00:02:03 +00:00
Alfred Perlstein
7c41487d14 catch up with mextfree callback change when TI_PRIVATE_JUMBOS is defined.
Pointed out by: kdm
2002-06-29 11:26:05 +00:00
Peter Wemm
160554fbf4 Remove a couple of __P() stragglers. 2002-06-29 02:32:34 +00:00
Kenneth D. Merry
98cb733c67 At long last, commit the zero copy sockets code.
MAKEDEV:	Add MAKEDEV glue for the ti(4) device nodes.

ti.4:		Update the ti(4) man page to include information on the
		TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
		and also include information about the new character
		device interface and the associated ioctls.

man9/Makefile:	Add jumbo.9 and zero_copy.9 man pages and associated
		links.

jumbo.9:	New man page describing the jumbo buffer allocator
		interface and operation.

zero_copy.9:	New man page describing the general characteristics of
		the zero copy send and receive code, and what an
		application author should do to take advantage of the
		zero copy functionality.

NOTES:		Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
		TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.

conf/files:	Add uipc_jumbo.c and uipc_cow.c.

conf/options:	Add the 5 options mentioned above.

kern_subr.c:	Receive side zero copy implementation.  This takes
		"disposable" pages attached to an mbuf, gives them to
		a user process, and then recycles the user's page.
		This is only active when ZERO_COPY_SOCKETS is turned on
		and the kern.ipc.zero_copy.receive sysctl variable is
		set to 1.

uipc_cow.c:	Send side zero copy functions.  Takes a page written
		by the user and maps it copy on write and assigns it
		kernel virtual address space.  Removes copy on write
		mapping once the buffer has been freed by the network
		stack.

uipc_jumbo.c:	Jumbo disposable page allocator code.  This allocates
		(optionally) disposable pages for network drivers that
		want to give the user the option of doing zero copy
		receive.

uipc_socket.c:	Add kern.ipc.zero_copy.{send,receive} sysctls that are
		enabled if ZERO_COPY_SOCKETS is turned on.

		Add zero copy send support to sosend() -- pages get
		mapped into the kernel instead of getting copied if
		they meet size and alignment restrictions.

uipc_syscalls.c:Un-staticize some of the sf* functions so that they
		can be used elsewhere.  (uipc_cow.c)

if_media.c:	In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
		calling malloc() with M_WAITOK.  Return an error if
		the M_NOWAIT malloc fails.

		The ti(4) driver and the wi(4) driver, at least, call
		this with a mutex held.  This causes witness warnings
		for 'ifconfig -a' with a wi(4) or ti(4) board in the
		system.  (I've only verified for ti(4)).

ip_output.c:	Fragment large datagrams so that each segment contains
		a multiple of PAGE_SIZE amount of data plus headers.
		This allows the receiver to potentially do page
		flipping on receives.

if_ti.c:	Add zero copy receive support to the ti(4) driver.  If
		TI_PRIVATE_JUMBOS is not defined, it now uses the
		jumbo(9) buffer allocator for jumbo receive buffers.

		Add a new character device interface for the ti(4)
		driver for the new debugging interface.  This allows
		(a patched version of) gdb to talk to the Tigon board
		and debug the firmware.  There are also a few additional
		debugging ioctls available through this interface.

		Add header splitting support to the ti(4) driver.

		Tweak some of the default interrupt coalescing
		parameters to more useful defaults.

		Add hooks for supporting transmit flow control, but
		leave it turned off with a comment describing why it
		is turned off.

if_tireg.h:	Change the firmware rev to 12.4.11, since we're really
		at 12.4.11 plus fixes from 12.4.13.

		Add defines needed for debugging.

		Remove the ti_stats structure, it is now defined in
		sys/tiio.h.

ti_fw.h:	12.4.11 firmware.

ti_fw2.h:	12.4.11 firmware, plus selected fixes from 12.4.13,
		and my header splitting patches.  Revision 12.4.13
		doesn't handle 10/100 negotiation properly.  (This
		firmware is the same as what was in the tree previously,
		with the addition of header splitting support.)

sys/jumbo.h:	Jumbo buffer allocator interface.

sys/mbuf.h:	Add a new external mbuf type, EXT_DISPOSABLE, to
		indicate that the payload buffer can be thrown away /
		flipped to a userland process.

socketvar.h:	Add prototype for socow_setup.

tiio.h:		ioctl interface to the character portion of the ti(4)
		driver, plus associated structure/type definitions.

uio.h:		Change prototype for uiomoveco() so that we'll know
		whether the source page is disposable.

ufs_readwrite.c:Update for new prototype of uiomoveco().

vm_fault.c:	In vm_fault(), check to see whether we need to do a page
		based copy on write fault.

vm_object.c:	Add a new function, vm_object_allocate_wait().  This
		does the same thing that vm_object allocate does, except
		that it gives the caller the opportunity to specify whether
		it should wait on the uma_zalloc() of the object structre.

		This allows vm objects to be allocated while holding a
		mutex.  (Without generating WITNESS warnings.)

		vm_object_allocate() is implemented as a call to
		vm_object_allocate_wait() with the malloc flag set to
		M_WAITOK.

vm_object.h:	Add prototype for vm_object_allocate_wait().

vm_page.c:	Add page-based copy on write setup, clear and fault
		routines.

vm_page.h:	Add page based COW function prototypes and variable in
		the vm_page structure.

Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
2002-06-26 03:37:47 +00:00
Poul-Henning Kamp
b418ad5c2e Follow NetBSD and s/IFM_1000_TX/IFM_1000_T/ 2002-04-28 20:34:20 +00:00
John Baldwin
6008862bc2 Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on:	i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Mike Silbersack
27d5f39f68 Remove mbuf exhaustion warning messages; these are handled by the
mbuf system in a rate-limited fashion now.

MFC after:	3 days
2002-02-11 23:38:30 +00:00
Luigi Rizzo
268cc03905 Remove printf's on mbuf/cluster allocation failures. There are now
equivalent and less dangerous (rate limited) messages in
the mbuf allocation code.

MFC after: 3 days
2001-12-14 05:56:35 +00:00
Brooks Davis
437e48e931 Don't pass an interface pointer to VLAN_INPUT{,_TAG}. Get it from the
mbuf instead.

Suggested by:	fenner
2001-12-03 17:28:27 +00:00
Jonathan Lemon
53de2fb09f Have the driver advertise that it is capable of hardware checksums, and
allow the user to control the setting.  (checksums are enabled by default)
2001-09-18 18:40:22 +00:00
Brooks Davis
9d4fe4b2b0 Make vlan(4) loadable, unloadable, and clonable. As a side effect,
interfaces must now always enable VLAN support.

Reviewed by:	jlemon
MFC after:	3 weeks
2001-09-05 21:10:28 +00:00
Brooks Davis
bbce7eba7f IFT_8021_VLAN -> IFT_L2VLAN per if_vlan_var.h rev 1.9. With this change
LINT compiles, but doesn't link.
2001-07-25 00:19:59 +00:00
Bill Paul
75ff968cd5 Apply patch supplied by Jonathan Chen: use the correct arguments to
pci_enable_io(). We need to use SYS_RES_IOPORT/SYS_RES_MEMORY instead
of PCIM_CMD_PORTEN/PCIM_CMD_MEMEN.
2001-07-09 17:58:42 +00:00
Poul-Henning Kamp
f73cf22ade Vlan tags are 12 bits, mask off anything above since the chip doesn't
seem to do so for us.

PR:		27567
Submitted by:	Koji HINO hino@ccm.cl.nec.co.jp
MFC after:	1 week
2001-05-23 19:25:14 +00:00
Bill Paul
6263665f87 Fix the definitions for memory bank sizes, which I somehow got wrong.
The constant I was using was correct, but I mislabeled it as 256K when
it should have been 512K. This doesn't actually change the code, but
it clarifies things somewhat.

Submitted by:	Chuck Cranor <chuck@research.att.com>
2001-04-26 16:40:45 +00:00
Bill Paul
07f65363cd Big round of minor updates:
- Use pci_get_powerstate()/pci_set_powerstate() in all the other drivers
  that need them so we don't have to fiddle with the PCI power management
  registers directly.
- Use pci_enable_busmaster()/pci_enable_io() to turn on busmastering and
  PIO/memory mapped accesses.
- Add support to the RealTek driver for the D-Link DFE-530TX+ which has
  a RealTek 8139 with its own PCI ID. (Submitted by Jason Wright)
- Have the SiS 900/National DP83815 driver be sure to disable PME
  mode in sis_reset(). This apparently fixes a problem on some
  motherboards where the DP83815 chip fails to receive packets.
  (Submitted by Chuck McCrobie <mccrobie@cablespeed.com>)
2001-02-21 20:54:22 +00:00
Jeroen Ruigrok van der Werven
d7d97eb0aa Preceed/preceeding are not english words. Use precede and preceding. 2001-02-18 10:43:53 +00:00
Bosko Milekic
9ed346bab0 Change and clean the mutex lock interface.
mtx_enter(lock, type) becomes:

mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)

similarily, for releasing a lock, we now have:

mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.

The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.

Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:

MTX_QUIET and MTX_NOSWITCH

The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:

mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.

Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.

Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.

Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.

Finally, caught up to the interface changes in all sys code.

Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
Poul-Henning Kamp
6817526d14 Convert if_multiaddrs from LIST to TAILQ so that it can be traversed
backwards in the three drivers which want to do that.

Reviewed by:    mikeh
2001-02-06 10:12:15 +00:00
Poul-Henning Kamp
fc2ffbe604 Mechanical change to use <sys/queue.h> macro API instead of
fondling implementation details.

Created with: sed(1)
Reviewed by: md5(1)
2001-02-04 13:13:25 +00:00
Poul-Henning Kamp
78d82c8c59 Use LIST_FOREACH() to traverse ifp->if_multiaddrs list, instead of
<sys/queue.h> implementation details.

Created with:   /usr/sbin/sed
Reviewed with:  /sbin/md5
2001-02-03 16:29:10 +00:00
Bosko Milekic
08812b3925 Implement MTX_RECURSE flag for mtx_init().
All calls to mtx_init() for mutexes that recurse must now include
the MTX_RECURSE bit in the flag argument variable. This change is in
preparation for an upcoming (further) mutex API cleanup.
The witness code will call panic() if a lock is found to recurse but
the MTX_RECURSE bit was not set during the lock's initialization.

The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to
MTX_RECURSED, which is more appropriate given its meaning.

The following locks have been made "recursive," thus far:
eventhandler, Giant, callout, sched_lock, possibly some others declared
in the architecture-specific code, all of the network card driver locks
in pci/, as well as some other locks in dev/ stuff that I've found to
be recursive.

Reviewed by: jhb
2001-01-19 01:59:14 +00:00
Bill Paul
031fc810ab Initialize/grab the mutex earlier in the attach phase, so that
bailing out to the fail: label where we release/destroy the mutex
will work without exploding.
2000-12-04 22:46:50 +00:00
Bosko Milekic
b7db1f9818 Change MEXTADD usage to pass the two new arguments.
Reviewed by: jlemon
2000-11-11 23:08:22 +00:00
Bosko Milekic
ca43854a66 (Introduce something sitting in my repo for 3 weeks now...)
Have if_ti stop "hiding" the softc pointer in the buffer region. Rather,
use the available void * passed to the free routine and pass the softc
pointer through there.

To note: in MEXTADD(), TI_JUMBO_FRAMELEN should probably be TI_JLEN. I left it
unchanged, because this way I'm sure to not damage anything in this respect...
2000-10-21 00:13:35 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Bill Paul
1e856a7b34 Use device_get_nameunit(dev) as the mutex string when calling
mtx_init() instead of hard-coded string constant. Also remember to do
the mutex changes to the ste driver, which I forgot in the first commit.
2000-10-13 18:35:49 +00:00
Bill Paul
d1ce910572 First round of converting network drivers from spls to mutexes. This
takes care of all the 10/100 and gigE PCI drivers that I've done.
Next will be the wireless drivers, then the USB ones. I may pick up
some stragglers along the way. I'm sort of playing this by ear: if
anyone spots any places where I've screwed up horribly, please let me
know.
2000-10-13 17:54:19 +00:00
Doug Rabson
21c3015a24 * Completely rewrite the alpha busspace to hide the implementation from
the drivers.
* Remove legacy inx/outx support from chipset and replace with macros
  which call busspace.
* Rework pci config accesses to route through the pcib device instead of
  calling a MD function directly.

With these changes it is possible to cleanly support machines which have
more than one independantly numbered PCI busses. As a bonus, the new
busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
David Malone
a5c4836d39 Replace the mbuf external reference counting code with something
that should be better.

The old code counted references to mbuf clusters by using the offset
of the cluster from the start of memory allocated for mbufs and
clusters as an index into an array of chars, which did the reference
counting. If the external storage was not a cluster then reference
counting had to be done by the code using that external storage.

NetBSD's system of linked lists of mbufs was cosidered, but Alfred
felt it would have locking issues when the kernel was made more
SMP friendly.

The system implimented uses a pool of unions to track external
storage. The union contains an int for counting the references and
a pointer for forming a free list. The reference counts are
incremented and decremented atomically and so should be SMP friendly.
This system can track reference counts for any sort of external
storage.

Access to the reference counting stuff is now through macros defined
in mbuf.h, so it should be easier to make changes to the system in
the future.

The possibility of storing the reference count in one of the
referencing mbufs was considered, but was rejected 'cos it would
often leave extra mbufs allocated. Storing the reference count in
the cluster was also considered, but because the external storage
may not be a cluster this isn't an option.

The size of the pool of reference counters is available in the
stats provided by "netstat -m".

PR:		19866
Submitted by:	Bosko Milekic <bmilekic@dsuper.net>
Reviewed by:	alfred (glanced at by others on -net)
2000-08-19 08:32:59 +00:00
Bill Paul
6f069b494a Add support for the Netgear GA620T copper gigabit card. 2000-08-02 18:49:17 +00:00
Bill Paul
51a4eb4bed Use a custom Tigon 2 firmware image, hopefully temporarily. This is
the 12.4.11 firmware with a few changes to the link handling code merged
in from the 12.4.13 release. I'm doing this because the 12.4.13 firmware
doesn't seem to handle 10/100 link settings properly on 1000baseT cards.
Note that the revision codes still identify the firmware as 12.4.13
because both ti_fw2.h and ti_fw.h have to have the same revision values,
and I wanted to keep the 12.4.13 firmware for Tigon 1 cards.

It's nice to have firmware source.
2000-07-26 23:55:34 +00:00