Commit Graph

7013 Commits

Author SHA1 Message Date
Dag-Erling Smørgrav
0aa2700123 Put OPIE to rest.
Differential Revision: https://reviews.freebsd.org/D36592
2022-10-02 03:37:29 +02:00
Dag-Erling Smørgrav
497cdf9673 sh: read more profile files.
Differential Revision: https://reviews.freebsd.org/D36505
MFC after:	1 month
2022-10-01 21:30:56 +00:00
Alexander V. Chernikov
7e5bf68495 netlink: add netlink support
Netlinks is a communication protocol currently used in Linux kernel to modify,
 read and subscribe for nearly all networking state. Interfaces, addresses, routes,
 firewall, fibs, vnets, etc are controlled via netlink.
It is async, TLV-based protocol, providing 1-1 and 1-many communications.

The current implementation supports the subset of NETLINK_ROUTE
family. To be more specific, the following is supported:
* Dumps:
 - routes
 - nexthops / nexthop groups
 - interfaces
 - interface addresses
 - neighbors (arp/ndp)
* Notifications:
 - interface arrival/departure
 - interface address arrival/departure
 - route addition/deletion
* Modifications:
 - adding/deleting routes
 - adding/deleting nexthops/nexthops groups
 - adding/deleting neghbors
 - adding/deleting interfaces (basic support only)
* Rtsock interaction
 - route events are bridged both ways

The implementation also supports the NETLINK_GENERIC family framework.

Implementation notes:
Netlink is implemented via loadable/unloadable kernel module,
 not touching many kernel parts.
Each netlink socket uses dedicated taskqueue to support async operations
 that can sleep, such as interface creation. All message processing is
 performed within these taskqueues.

Compatibility:
Most of the Netlink data models specified above maps to FreeBSD concepts
 nicely. Unmodified ip(8) binary correctly works with
interfaces, addresses, routes, nexthops and nexthop groups. Some
software such as net/bird require header-only modifications to compile
and work with FreeBSD netlink.

Reviewed by:	imp
Differential Revision: https://reviews.freebsd.org/D36002
MFC after:	2 months
2022-10-01 14:15:35 +00:00
Ed Maste
b4d15fdd53 Remove obsolete SystemV dir from BSD.usr.dist
/usr/share/zoneinfo/SystemV is removed via ObsoleteFiles as of commits
da038df8c9 and 57338837ae, so do not create it in the first place.

PR:		266666
Fixes:		da038df8c9 ("share/zoneinfo: don't build obsolete...")
MFC after:	3 days
2022-09-29 12:01:34 -04:00
Maxim Sobolev
3078531de1 Fix mergemaster(8) breakage in the 6ad780caa.
Split out termcap.small generation into its own Makefile under
etc/termcap, so it's properly executed by the underlying command:

  make 'SUBDIR_OVERRIDE=etc' everything

Reported by:	gbe
MFC after:	1 month
2022-09-13 13:36:22 -07:00
Cy Schubert
27b9777c28 libexec/rc: Add var_run rc script
Users with a tmpfs /var/run will lose the directory tree state of
/var/run at reboot. This rc script will optionally (by default)
capture the state of the directory structure in /var/run prior to
shutdown and recreate it at system boot.

Alternatively a user can save the state of the /var/run directories
manually using service var_run save and disable the autosaving of
/var/run state using the var_run_autosave variable, for those
paranoid SSD users.

PR:			259585, 259699
Reported by:		freebsd@walstatt-de.de,
Reviewed by:		philip, gbe (previous version)
MFC after:		1 week
Differential Revision:	https://reviews.freebsd.org/D36386
2022-09-05 06:19:42 -07:00
Dag-Erling Smørgrav
7ccdad905f renice: add unit tests.
Sponsored by:	Klara, Inc.
2022-08-25 20:06:20 +00:00
Emmanuel Vadot
1a104a3bf3 pkgbase: mtree: Correctly tag /var/db entries 2022-08-16 21:14:56 +02:00
Emmanuel Vadot
d2888f5ccf pkgbase: mtree: Correctly tag /var/run entries 2022-08-16 21:14:49 +02:00
Alex Richardson
ac175bd33a Install working pkgconfig .pc files for compat libraries
The default ones are install them to /usr/libdata/pkgconfig, and we can't
use this path for compat libraries, so we use /usr/lib<suffix>/pkgconfigi here.

Test Plan:	grep -rn libdir= ./usr/lib32/pkgconfig/*.pc
MFC after:	1 week
Differential Revision: https://reviews.freebsd.org/D34939
2022-08-11 23:18:34 +01:00
Mateusz Piotrowski
e7437ae907 rc: Start testing the rc(8) framework (beginning with *_oomprotect)
This change adds 2 tests to make sure that the *_oomprotect variable
sets the protection against OOM killer properly within rc(8) scripts.

This is also adding the first tests for the rc(8) framework. More tests
will be added as we go.

PR:		256148
Approved by:	des
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D35745
2022-07-26 15:39:39 +02:00
Jessica Clarke
76c100d634 etc: Fix distrib-dirs to not rely on a BSDism
FreeBSD and macOS have a test that treats == as an alias for =, but
Linux tends to use GNU coreutils (when not a builtin) which does not.
Use the standard syntax instead for compatibility.

Obtained from:	CheriBSD
Differential Revision:	https://reviews.freebsd.org/D35811
2022-07-15 23:04:16 +01:00
Kristof Provost
067acae2f3 if_ovpn tests: basic test case
Set up an OpenVPN tunnel between two jails, send traffic through them to
confirm basic function.

Sponsored by:	Rubicon Communications, LLC ("Netgate")
Differential Revision:	https://reviews.freebsd.org/D35067
2022-06-28 13:50:37 +02:00
Alexander V. Chernikov
924226fba1 testing: move atf-pytest-wrapper to /usr/libexec
Move pytest wrapper to the collection of the other atf wrappers
 in libexec. It solves the problem of combining bits & pieces from
 bsd.test.mk and bgs.prog.mk to address "test binary, but not the
 suite binary".

Reviewed by:	kp
Differential Revision: https://reviews.freebsd.org/D35604
MFC after:	2 weeks
2022-06-26 13:25:47 +00:00
Alexander V. Chernikov
9a75209d2b routing: add tests/sys/net/routing to mtree
MFC after:	2 weeks
2022-06-25 21:16:14 +00:00
Dimitry Andric
56f451bb3b Merge llvm-project release/14.x llvmorg-14.0.5-0-gc12386ae247c
This updates llvm, clang, compiler-rt, libc++, libunwind, lld, lldb and
openmp to llvmorg-14.0.5-0-gc12386ae247c, aka 14.0.5 release.

PR:		261742
MFC after:	3 days
2022-06-12 20:53:16 +02:00
Dimitry Andric
987d26ee3f Remove yet another incorrect .. level from BSD.usr.dist
Since the spacing was off, it was not clear that it descended one level
too many.

Fixes:		695052e240
MFC after:	3 days
2022-06-12 16:46:17 +02:00
Xin LI
695052e240 Fix mtree for usr/
MFC after:	3 days
2022-06-11 21:38:05 -07:00
Dimitry Andric
809922b010 Update rest of llvm-project build glue for 14.0.4
I completely forgot about updating the generated llvm-project config
files, which also contain version numbers, etc. Sorry for the churn.

PR:		261742
Fixes:		ab9d54731f
MFC after:	3 days
2022-06-05 18:39:43 +02:00
Dimitry Andric
7b6f5ebef6 Add several sanitizer ignore lists under /usr/lib/clang
Some of the sanitizers from compiler-rt can use ignore lists, which are
loosely modeled on valgrind's example. Upstream provides default lists
for AddressSanitizer, CFI, and MemorySanitizer, so install these in the
expected location, /usr/lib/clang/14.0.3/share.

Reviewed by:	emaste
MFC after:	2 weeks
Differential Revision: https://reviews.freebsd.org/D35338
2022-05-28 15:46:38 +02:00
Dimitry Andric
3a9a9c0ca4 Merge llvm-project release/14.x llvmorg-14.0.3-0-g1f9140064dfb
This updates llvm, clang, compiler-rt, libc++, libunwind, lld, lldb and
openmp to llvmorg-14.0.3-0-g1f9140064dfb.

PR:		261742
MFC after:	2 weeks
2022-05-14 13:46:42 +02:00
Dimitry Andric
04eeddc0aa Merge llvm-project main llvmorg-14-init-17616-g024a1fab5c35
This updates llvm, clang, compiler-rt, libc++, libunwind, lld, lldb and
openmp to llvmorg-14-init-17616-g024a1fab5c35.

PR:		261742
MFC after:	2 weeks
2022-05-14 13:44:34 +02:00
Dimitry Andric
4824e7fd18 Merge llvm-project main llvmorg-14-init-11187-g222442ec2d71
This updates llvm, clang, compiler-rt, libc++, libunwind, lld, lldb and
openmp to llvmorg-14-init-11187-g222442ec2d71.

PR:		261742
MFC after:	2 weeks
2022-05-14 13:43:49 +02:00
Dimitry Andric
5e801ac66d Merge llvm-project main llvmorg-14-init-10223-g401b76fdf2b3
This updates llvm, clang, compiler-rt, libc++, libunwind, lld, lldb and
openmp to llvmorg-14-init-10223-g401b76fdf2b3.

PR:		261742
MFC after:	2 weeks
2022-05-14 13:43:32 +02:00
Piotr Pawel Stefaniak
47bcbde91d bintrans: move files to a new directory
And reflect the change in various places.
2022-04-18 10:53:11 +02:00
Piotr Pawel Stefaniak
4cd4841a27 Modularize uuencode and uudecode by wrapping them in bintrans.c
The program will be installed as bintrans, uuencode, uudecode,
b64encode, and b64decode and will be responsible for running the coders
according to their historical behavior.

Additionally, bintrans will be able to take a parameter designating
the coder and accept all its options in this form:
bintrans <coder> [options]
and the behavior should be the same as if
<coder> [options]
was invoked.
This has the advantage that adding coders won't require installing them
as binaries.

Move uudecode files to uuencode since the latter is the one that
provides the manual page.

Reviewed by:	delphij (previous version)
Differential Revision:	https://reviews.freebsd.org/D32943
2022-04-18 10:46:44 +02:00
Mark Johnston
10aa36702c etc/mtree: Remove tabs 2022-04-15 10:27:22 -04:00
Mark Johnston
d0f245d21f libsysdecode: Add regression tests for sysdecode_cap_rights(3)
Reviewed by:	jhb, emaste
MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D34900
2022-04-15 10:23:32 -04:00
Kirk McKusick
c7996ddf80 Create a new GEOM utility, gunion(8).
The gunion(8) utility is used to track changes to a read-only disk on
a writable disk. Logically, a writable disk is placed over a read-only
disk. Write requests are intercepted and stored on the writable
disk. Read requests are first checked to see if they have been
written on the top (writable disk) and if found are returned. If
they have not been written on the top disk, then they are read from
the lower disk.

The gunion(8) utility can be especially useful if you have a large
disk with a corrupted filesystem that you are unsure of how to
repair. You can use gunion(8) to place another disk over the corrupted
disk and then attempt to repair the filesystem. If the repair fails,
you can revert all the changes in the upper disk and be back to the
unchanged state of the lower disk thus allowing you to try another
approach to repairing it. If the repair is successful you can commit
all the writes recorded on the top disk to the lower disk.

Another use of the gunion(8) utility is to try out upgrades to your
system. Place the upper disk over the disk holding your filesystem
that is to be upgraded and then run the upgrade on it. If it works,
commit it; if it fails, revert the upgrade.

Further details can be found in the gunion(8) manual page.

Reviewed by: Chuck Silvers, kib (earlier version)
tested by:   Peter Holm
Differential Revision: https://reviews.freebsd.org/D32697
2022-02-28 16:36:08 -08:00
Eric van Gyzen
1581ec9a45 Integrate contrib/file/tests with kyua/atf
This could be done better by making each test a separate ATF test case.
This exercise is left for the reader.

Reviewed by:	delphij (earlier version)
MFC after:	1 week
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D34303
2022-02-16 13:02:45 -06:00
Eric van Gyzen
4e71258227 newfs_msdos: connect the ATF test from NetBSD
NetBSD has an ATF test for newfs_msdos.  Connect it to the build.
Adapt it for FreeBSD.  This would have caught the bug fixed by my
previous commit.

Reviewed by:	delphij, emaste
MFC after:	1 week
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D34116
2022-02-16 09:56:16 -06:00
Michael Reifenberger
19eaa01bea Append Keyboard Layout specified option for using VNC.
Part two: Append bhyve -K option for specified keyboard layout
with layout setting files every languages.
Since the cmd option '-k' was used in the meantime
it was changed to '-K'

PR:		246121
Submitted by:	koinec@yahoo.co.jp
Reviewed by:	grehan@
Differential Revision:	https://reviews.freebsd.org/D29473

MFC after:	4 weeks
2022-01-20 23:49:27 +01:00
Warner Losh
72bf91e250 libsoft: Remove support for installing libsoft
Remove the infrasturcture needed to create the libsoft directories.

Sponsored by:		Netflix
2022-01-06 22:34:10 -07:00
Emmanuel Vadot
dcf9d46a3f pkgbase: Create a FreeBSD-mtree package
And put the mtree binary and files in it.
Useful to create small mfsroot using /etc/rc.d/var without
having to install FreeBSD-utilities.

MFC after:	2 weeks
Sponsored by:	Beckhoff Automation GmbH & Co. KG
Differential Revision:	https://reviews.freebsd.org/D33442
2021-12-21 10:17:33 +01:00
Florian Walpen
a9545eede4 Add idle priority scheduling privilege group to MAC/priority
Add an idletime user group that allows non-root users to run processes
with idle scheduling priority. Privileges are granted by a MAC policy in
the mac_priority module. For this purpose, the kernel privilege
PRIV_SCHED_IDPRIO was added to sys/priv.h (kernel module ABI change).

Deprecate the system wide sysctl(8) knob
security.bsd.unprivileged_idprio which lets any user run idle priority
processes, regardless of context. While the knob is still working, it is
marked as deprecated in the description and in the man pages.

MFC after:	2 weeks
Differential revision:	https://reviews.freebsd.org/D33338
2021-12-10 04:54:48 +02:00
Florian Walpen
bf2fa8d9d1 MAC/priority module for realtime privilege group
This is a MAC policy module that grants scheduling privileges based on
group membership.  Users or processes in the group realtime (gid 47) are
allowed to run threads and processes with realtime scheduling priority.
For timing-sensitive, low-latency software like audio/jack, running with
realtime priority helps to avoid stutter and gaps.

PR:	239125
MFC after:	2 weeks
Differential revision:	https://reviews.freebsd.org/D33191
2021-12-04 20:19:25 +02:00
Baptiste Daroussin
37d0601f42 bsddialog: import new TUI widget and utility
bsddialog is an attempt to write in permissive license a replacement for
libdialog.

While it is still in early stage it is good enough to already be used in
many areas, it is imported as private lib until it matures enough to be
considered as having a stable ABI
2021-11-24 11:03:31 +01:00
Dimitry Andric
6e75b2fbf9 Merge llvm-project release/13.x llvmorg-13.0.0-rc1-97-g23ba3732246a
This updates llvm, clang, compiler-rt, libc++, libunwind, lld, lldb and
openmp to llvmorg-13.0.0-rc1-97-g23ba3732246a.

PR:		258209
MFC after:	2 weeks
2021-11-13 21:42:03 +01:00
Dimitry Andric
fe6060f10f Merge llvm-project main llvmorg-13-init-16847-g88e66fa60ae5
This updates llvm, clang, compiler-rt, libc++, libunwind, lld, lldb and
openmp to llvmorg-13-init-16847-g88e66fa60ae5, the last commit before
the upstream release/13.x branch was created.

PR:		258209
MFC after:	2 weeks
2021-11-13 21:39:49 +01:00
Warner Losh
517e52b6c2 awk: Move to using two sets of tests
Upstream one-true-awk has two sets of tests. These are in addition to
NetBSD's tests we're using. The 'bugs-fixed' tests from upstream are
ready to use as-is (more or less). However, the 'tests' from upstream
are not, so for now we'll just use the netbsd and bugs-fixed tests.
They provide an OK workout and are better than nothing, though the tests
themselves are for specific esoteric things.

The upstream bugs-fixed tests are *ALMOST* a drop in. However, 3 test
for errors and the upstream test jig mashes stdout and stderr together,
which atf doesn't do, so make a tiny tweak to the upstream tests that I
hope to upstream. Plus upstream has ../a.out: instead of awk: in the
output. Not sure how to deal with this yet, so I've not proposed
anything upstream and have changed the test locally.

In addition, the system-status.awk test is not suitable to run in ATF.
It wants to force sh to dump core, but kyua doesn't seem to allow that
sometimes so the test will fail or pass based on whether or not a core
dump can be created. Since it's unstable, remove it.

This required moving the netbsd tests to a new direcotry, so update
mtree files as well. The change is useless for 'make check' without it.

Sponsored by:		Netflix
Differential Revision:	https://reviews.freebsd.org/D31376
2021-11-05 08:53:36 -06:00
Baptiste Daroussin
d410b585b6 sh(1): make it the default shell for the root user
In the recent history sh(1) has gain the missing features for it to
become a usable interractive shell:
- command completion
- persistent history support
- improvements on the default bindings in emacs mode
- improvements in the vi mode (repect $EDITOR)
- print a newline when exiting via ^D
- default prompt and improvements on how PS1 can be configured
- and more.

This changes also simplifies making tiny freebsd images with only sh(1)
as a shell
2021-10-20 09:34:05 +02:00
Antranig Vartanian
7955efd574 Add support for jail.conf.d
Using /etc/jail.{jailname}.conf is nice, however it makes /etc/ very
messy if you have many jails.  This patch allows one to move these
config files out of the way into /etc/jail.conf.d/{jailname}.conf.

Note that the same caveat as /etc/jail.*.conf applies: the jail service
will not autodiscover all of these for starting 'all' jails.  This is
considered future work, since the behavior matches.

Reviewed by:	kevans
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D24570
2021-09-10 00:30:04 -05:00
Piotr Pawel Stefaniak
f8e50dd2c6 Register /usr/tests/usr.bin/diff3
I wasn't able to make check to run diff3 tests, but kevans figured out
that I was missing diff3 in mtree.
2021-08-23 07:04:28 +02:00
Cyril Zhang
a85404906b vmm: Add credential to cdev object
Add a credential to the cdev object in sysctl_vmm_create(), then check
that we have the correct credentials in sysctl_vmm_destroy(). This
prevents a process in one jail from opening or destroying the /dev/vmm
file corresponding to a VM in a sibling jail.

Add regression tests.

Reviewed by:	jhb, markj
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D31156
2021-08-18 13:41:33 -04:00
Baptiste Daroussin
c982a41a0c mtree: remove a leftover '..' in BSD.usr.dist making it inconsistent
Reported by:	Michael Butler <imb@protected-networks.net>
2021-08-03 17:06:31 +02:00
Baptiste Daroussin
184d64af13 locales: stop hardcoding the directories in the mtree
The framework knows how to create directories and tag them properly
for a the creation of a mtree, not need to hardcode all the locales
entries in bsd.usr.mk

This simplifies addition of new locales but also allow people building
with WITHOUT_LOCALES to end up with a directory full of empty files
2021-08-03 14:25:00 +02:00
Martin Matuska
48b4fe0503 zfs: attach zpool_influxdb to build
From the zpool_influxdb.8 manual page:
  zpool_influxdb produces InfluxDB-line-protocol-compatible metrics from
  zpools.  Like the zpool command, zpool_influxdb reads the current pool
  status and statistics.  Unlike the zpool command which is intended for
  humans, zpool_influxdb formats the output in the InfluxDB line protocol.
  The expected use is as a plugin to a metrics collector or aggregator,
  such as Telegraf.

zpool_influxdb is installed into /usr/libexec/zfs/

Differential revision:	https://reviews.freebsd.org/D31094
MFC after:	3 days
2021-07-07 20:15:12 +02:00
Li-Wen Hsu
cb194afef5
sbin/md5: Create /usr/tests/sbin/md5 directory for placing tests
Sponsored by:	The FreeBSD Foundation
2021-06-25 18:29:46 +08:00
Dimitry Andric
23408297fb Merge llvm-project 12.0.1 rc2
This updates llvm, clang, compiler-rt, libc++, libunwind, lld, lldb and
openmp to llvmorg-12.0.1-rc2-0-ge7dac564cd0e, a.k.a. 12.0.1 rc2.

PR:		255570
MFC after:	6 weeks
2021-06-19 20:09:28 +02:00
Emmanuel Vadot
ed0a582d88 pkgbase: Put the last sendmail files in the sendmail package
Differential Revision:	https://reviews.freebsd.org/D30757
Sponsored by:	Diablotin Systems
2021-06-19 17:50:11 +02:00