subrulenr is considered unset if it's set to -1, not if it's set to 1.
See contrib/tcpdump/print-pflog.c pflog_print() for a user.
This caused incorrect pflog output (tcpdump -n -e -ttt -i pflog0):
rule 0..16777216(match)
instead of the correct output of
rule 0/0(match)
PR: 214832
Submitted by: andywhite@gmail.com
Use after free happens for state that is deleted. The reference
count is what prevents the state from being freed. When the
state is dequeued, the reference count is dropped and the memory
freed. We can't dereference the next pointer or re-queue the
state.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8671
Ignore the ECN bits on 'tos' and 'set-tos' and allow to use
DCSP names instead of having to embed their TOS equivalents
as plain numbers.
Obtained from: OpenBSD
Sponsored by: OPNsense
Differential Revision: https://reviews.freebsd.org/D8165
The tag fastroute came from ipf and was removed in OpenBSD in 2011. The code
allows to skip the in pfil hooks and completely removes the out pfil invoke,
albeit looking up a route that the IP stack will likely find on its own.
The code between IPv4 and IPv6 is also inconsistent and marked as "XXX"
for years.
Submitted by: Franco Fichtner <franco@opnsense.org>
Differential Revision: https://reviews.freebsd.org/D8058
While here, prefer if_addrhead (FreeBSD) to if_addrlist (BSD compat) naming
for the interface address list in sctp_bsd_addr.c
Reviewed by: tuexen
Differential Revision: https://reviews.freebsd.org/D8051
Without this, rules using address ranges (e.g. "10.1.1.1 - 10.1.1.5") did not
match addresses correctly on little-endian systems.
PR: 211796
Obtained from: OpenBSD (sthen)
MFC after: 3 days
pf returns PF_PASS, PF_DROP, ... in the netpfil hooks, but the hook callers
expect to get E<foo> error codes.
Map the returns values. A pass is 0 (everything is OK), anything else means
pf ate the packet, so return EACCES, which tells the stack not to emit an ICMP
error message.
PR: 207598
teardown of VNETs once pf(4) has been shut down.
Properly split resources into VNET_SYS(UN)INITs and one time module
loading.
While here cover the INET parts in the uninit callpath with proper
#ifdefs.
Approved by: re (gjb)
Obtained from: projects/vnet
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
borrow pf's lock, and also make sure pflog goes after pf is gone
in order to avoid callouts in VNETs to an already freed instance.
Reported by: Ivan Klymenko, Johan Hendriks on current@ today
Obtained from: projects/vnet
Sponsored by: The FreeBSD Foundation
MFC after: 13 days
Approved by: re (gjb)
proper virtualisation, teardown, avoiding use-after-free, race conditions,
no longer creating a thread per VNET (which could easily be a couple of
thousand threads), gracefully ignoring global events (e.g., eventhandlers)
on teardown, clearing various globally cached pointers and checking
them before use.
Reviewed by: kp
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6924
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.
Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.
Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.
For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.
Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.
For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).
Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.
Approved by: re (hrs)
Obtained from: projects/vnet
Reviewed by: gnn, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6747
Adopt the OpenBSD syntax for setting and filtering on VLAN PCP values. This
introduces two new keywords: 'set prio' to set the PCP value, and 'prio' to
filter on it.
Reviewed by: allanjude, araujo
Approved by: re (gjb)
Obtained from: OpenBSD (mostly)
Differential Revision: https://reviews.freebsd.org/D6786
We were inconsistent about the use of time_second vs. time_uptime.
Always use time_uptime so the value can be meaningfully compared.
Submitted by: "Max" <maximos@als.nnov.ru>
MFC after: 4 days
When we guess the nature of the outbound packet (output vs. forwarding) we need
to take bridges into account. When bridging the input interface does not match
the output interface, but we're not forwarding. Similarly, it's possible for the
interface to actually be the bridge interface itself (and not a member interface).
PR: 202351
MFC after: 2 weeks
In the DIOCRSETADDRS ioctl() handler we allocate a table for struct pfr_addrs,
which is processed in pfr_set_addrs(). At the users request we also provide
feedback on the deleted addresses, by storing them after the new list
('bcopy(&ad, addr + size + i, sizeof(ad));' in pfr_set_addrs()).
This means we write outside the bounds of the buffer we've just allocated.
We need to look at pfrio_size2 instead (i.e. the size the user reserved for our
feedback). That'd allow a malicious user to specify a smaller pfrio_size2 than
pfrio_size though, in which case we'd still read outside of the allocated
buffer. Instead we allocate the largest of the two values.
Reported By: Paul J Murphy <paul@inetstat.net>
PR: 207463
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D5426
There are number of radix consumers in kernel land (pf,ipfw,nfs,route)
with different requirements. In fact, first 3 don't have _any_ requirements
and first 2 does not use radix locking. On the other hand, routing
structure do have these requirements (rnh_gen, multipath, custom
to-be-added control plane functions, different locking).
Additionally, radix should not known anything about its consumers internals.
So, radix code now uses tiny 'struct radix_head' structure along with
internal 'struct radix_mask_head' instead of 'struct radix_node_head'.
Existing consumers still uses the same 'struct radix_node_head' with
slight modifications: they need to pass pointer to (embedded)
'struct radix_head' to all radix callbacks.
Routing code now uses new 'struct rib_head' with different locking macro:
RADIX_NODE_HEAD prefix was renamed to RIB_ (which stands for routing
information base).
New net/route_var.h header was added to hold routing subsystem internal
data. 'struct rib_head' was placed there. 'struct rtentry' will also
be moved there soon.
new return codes of -1 were mistakenly being considered "true". Callout_stop
now returns -1 to indicate the callout had either already completed or
was not running and 0 to indicate it could not be stopped. Also update
the manual page to make it more consistent no non-zero in the callout_stop
or callout_reset descriptions.
MFC after: 1 Month with associated callout change.
r289932 accidentally broke the rule skip calculation. The address family
argument to PF_ANEQ() is now important, and because it was set to 0 the macro
always evaluated to false.
This resulted in incorrect skip values, which in turn broke the rule
evaluations.
When using route-to (or reply-to) pf sends the packet directly to the output
interface. If that interface doesn't support checksum offloading the checksum
has to be calculated in software.
That was already done in the IPv4 case, but not for the IPv6 case. As a result
we'd emit packets with pseudo-header checksums (i.e. incorrect checksums).
This issue was exposed by the changes in r289316 when pf stopped performing full
checksum calculations for all packets.
Submitted by: Luoqi Chen
MFC after: 1 week
In certain configurations (mostly but not exclusively as a VM on Xen) pf
produced packets with an invalid TCP checksum.
The problem was that pf could only handle packets with a full checksum. The
FreeBSD IP stack produces TCP packets with a pseudo-header checksum (only
addresses, length and protocol).
Certain network interfaces expect to see the pseudo-header checksum, so they
end up producing packets with invalid checksums.
To fix this stop calculating the full checksum and teach pf to only update TCP
checksums if TSO is disabled or the change affects the pseudo-header checksum.
PR: 154428, 193579, 198868
Reviewed by: sbruno
MFC after: 1 week
Relnotes: yes
Sponsored by: RootBSD
Differential Revision: https://reviews.freebsd.org/D3779
Problem description:
How do we currently perform layer 2 resolution and header imposition:
For IPv4 we have the following chain:
ip_output() -> (ether|atm|whatever)_output() -> arpresolve()
Lookup is done in proper place (link-layer output routine) and it is possible
to provide cached lle data.
For IPv6 situation is more complex:
ip6_output() -> nd6_output() -> nd6_output_ifp() -> (whatever)_output() ->
nd6_storelladdr()
We have ip6_ouput() which calls nd6_output() instead of link output routine.
nd6_output() does the following:
* checks if lle exists, creates it if needed (similar to arpresolve())
* performes lle state transitions (similar to arpresolve())
* calls nd6_output_ifp() which pushes packets to link output routine along
with running SeND/MAC hooks regardless of lle state
(e.g. works as run-hooks placeholder).
After that, iface output routine like ether_output() calls nd6_storelladdr()
which performs lle lookup once again.
As a result, we perform lookup twice for each outgoing packet for most types
of interfaces. We also need to maintain runtime-checked table of 'nd6-free'
interfaces (see nd6_need_cache()).
Fix this behavior by eliminating first ND lookup. To be more specific:
* make all nd6_output() consumers use nd6_output_ifp() instead
* rename nd6_output[_slow]() to nd6_resolve_[slow]()
* convert nd6_resolve() and nd6_resolve_slow() to arpresolve() semantics,
e.g. copy L2 address to buffer instead of pushing packet towards lower
layers
* Make all nd6_storelladdr() users use nd6_resolve()
* eliminate nd6_storelladdr()
The resulting callchain is the following:
ip6_output() -> nd6_output_ifp() -> (whatever)_output() -> nd6_resolve()
Error handling:
Currently sending packet to non-existing la results in ip6_<output|forward>
-> nd6_output() -> nd6_output _lle() which returns 0.
In new scenario packet is propagated to <ether|whatever>_output() ->
nd6_resolve() which will return EWOULDBLOCK, and that result
will be converted to 0.
(And EWOULDBLOCK is actually used by IB/TOE code).
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D1469
If net.link.bridge.pfil_bridge is set we can end up thinking we're forwarding in
pf_test6() because the rcvif and the ifp (output interface) are different.
In that case we're bridging though, and the rcvif the the bridge member on which
the packet was received and ifp is the bridge itself.
If we'd set dir to PF_FWD we'd end up calling ip6_forward() which is incorrect.
Instead check if the rcvif is a member of the ifp bridge. (In other words, the
if_bridge is the ifp's softc). If that's the case we're not forwarding but
bridging.
PR: 202351
Reviewed by: eri
Differential Revision: https://reviews.freebsd.org/D3534
The crop/drop-ovl fragment scrub modes are not very useful and likely to confuse
users into making poor choices.
It's also a fairly large amount of complex code, so just remove the support
altogether.
Users who have 'scrub fragment crop|drop-ovl' in their pf configuration will be
implicitly converted to 'scrub fragment reassemble'.
Reviewed by: gnn, eri
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D3466
OpenBSD pf 4.5).
Fix argument ordering to memcpy as well as the size of the copy in the
(theoretical) case that pfi_buffer_cnt should be greater than ~_max.
This fix the failure when you hit the self table size and force it to be
resized.
MFC after: 3 days
Sponsored by: Rubicon Communications (Netgate)
CoDel is a parameterless queue discipline that handles variable bandwidth
and RTT.
It can be used as the single queue discipline on an interface or as a sub
discipline of existing queue disciplines such as PRIQ, CBQ, HFSC, FAIRQ.
Differential Revision: https://reviews.freebsd.org/D3272
Reviewd by: rpaulo, gnn (previous version)
Obtained from: pfSense
Sponsored by: Rubicon Communications (Netgate)
The size2 is the maximum userland buffer size (used when the addresses are
copied back to userland).
Obtained from: pfSense
MFC after: 3 days
Sponsored by: Rubicon Communications (Netgate)
When we allocate the struct pf_fragment in pf_fillup_fragment() we forgot to
initialise the fr_flags field. As a result we sometimes mistakenly thought the
fragment to not be a buffered fragment. This resulted in panics because we'd end
up freeing the pf_fragment but not removing it from V_pf_fragqueue (believing it
to be part of V_pf_cachequeue).
The next time we iterated V_pf_fragqueue we'd use a freed object and panic.
While here also fix a pf_fragment use after free in pf_normalize_ip().
pf_reassemble() frees the pf_fragment, so we can't use it any more.
PR: 201879, 201932
MFC after: 5 days
We don't use the direction of the fragments for anything. The frc_direction
field is assigned, but never read.
Just remove it.
Differential Revision: https://reviews.freebsd.org/D2773
Approved by: philip (mentor)
When we try to look up a pf_fragment with pf_find_fragment() we compare (see
pf_frag_compare()) addresses (and family), id but also protocol. We failed to
save the protocol to the pf_fragment in pf_fragcache(), resulting in failing
reassembly.
Differential Revision: https://reviews.freebsd.org/D2772
Fix a panic when handling fragmented ip4 packets with 'drop-ovl' set.
In that scenario we take a different branch in pf_normalize_ip(), taking us to
pf_fragcache() (rather than pf_reassemble()). In pf_fragcache() we create a
pf_fragment, but do not set the address family. This leads to a panic when we
try to insert that into pf_frag_tree because pf_addr_cmp(), which is used to
compare the pf_fragments doesn't know what to do if the address family is not
set.
Simply ensure that the address family is set correctly (always AF_INET in this
path).
PR: 200330
Differential Revision: https://reviews.freebsd.org/D2769
Approved by: philip (mentor), gnn (mentor)
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
