for the CONFS issue with dma.conf and ppp.conf.
Thank you very much to Bryan Drewery for looking into the
problem and providing this fix.
Pointyhat: gjb
Sponsored by: The FreeBSD Foundation
The 'CONFS' entries in share/mk/bsd.confs.mk explicitly check
for the 'installconfig', but does not behave properly with the
'distribute' target.
This seems to be related to the previously-reported issues
with files within /etc in the past.
Reported by: Ben Woods
Sponsored by: The FreeBSD Foundation
Files listed in 'CONFS' are not properly included in new
installations (missing from base.txz), for reasons I still
do not fully understand.
This reverts the change excluding /etc/ppp/ppp.conf from
a new installation. /etc/dma/dma.conf is also affected,
but requires a different solution, still being investigated.
Reported by: Ben Woods
Sponsored by: The FreeBSD Foundation
Extend it to other cases of meta mode cookies so they get the proper rm
cookie behavior when a .meta file detects it needs to rebuild and fails.
Sponsored by: EMC / Isilon Storage Division
This request by the submitter was valid, but unfortunately there is a good deal
of concern over breakage when DESTDIR != / or "", i.e. with release media.
Making this change correct for all cases would make it markedly more complex
than need be
Requested by: bdrewery, ian, imp
PR: 76362
tree was /usr/src/svn, /sys would point to usr/src/svn
This fixes the assumption that the source tree will always exist at
${DESTDIR}/usr/src
MFC after: 1 week
PR: 76362
Reported by: Scot Hetzel <swhetzel@gmail.com>
Sponsored by: EMC / Isilon Storage Division
This fixes /var/empty not being schg in the installation.
This was a change from fmtree to nmtree, that -i is now required to
apply these flags.
PR: 194189
Submitted by: guyyur@gmail.com
MFC after: 2 weeks
Relnotes: yes
Extend OptionalObsoleteFiles.inc to delete all lib32 files when MK_LIB32 is
set to no on a system that previously had lib32 libraries installed.
Also, to prevent "make delete-old-dirs" from always deleting lib32 directories
after an installworld, move the lib32 subtree to its own mtree file that only
gets applied when MK_LIB32=yes.
Test: Ran "make delete-old" and "make delete-old-libs" on a system that never
had MK_LIB32 enabled, and on a system where MK_LIB32 was enabled and later
disabled. Did this both on amd64 and powerpc64.
Test: Ran "make tinderbox" without errors.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D3923
leap second date correct
Updates to the file can be obtained from ftp://time.nist.gov/pub/ or
ftp://tycho.usno.navy.mil/pub/ntp/.
Suggested by: dwmalone
Reviewed by: roberto, dwmalone, delphij
Approved by: roberto
MFC after: 1 week
Simplifying maintainance and options (only one place to deal with MK_DMAGENT)
This also makes packaging base less intrusive by getting a single point where
to add tags.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
target. This effectively reverts r261142, which reverted both
r261031 and r261044.
Prodded by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This is being done to fix breakage with make distribution with read-only
source trees as make distribution doesn't use make obj like building
tests/ does in all cases
Reported by: Wolfgang Zenker <wolfgang@lyxys.ka.sub.org>
Suggested by: jhb
X-MFC with: r282059
MFC after: 1 week
This avoids various failure modes (e.g., when building and installing a
single binary with debug data on a system that otherwise does not have
it enabled).
It is also consistent with the way other directory hierarchies are
handled (e.g. share/man).
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D1962
build/install without disrupting other dependent services (see r278249, et
al):
- MK_LOCATE
- MK_MAN
- MK_NLS
- MK_OPENSSL
- MK_PKGBOOTSTRAP
- MK_SENDMAIL
Additional flags need to be handled in etc/Makefile, but it requires
refactoring the relevant scripts in etc/rc.d/*
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Up to 7 archives of the log will be kept (just for consistency with the other
log rotation rules)
PR: 196788
MFC after: 1 week
Reviewed by: hselasky
Sponsored by: EMC / Isilon Storage Division
The work in r258233 hardcoded the assumption that tests was the last component
of the tests tree by pushing tests as an explicit prefix for the paths in
BSD.tests.dist and /usr was the prefix for all tests, per BSD.usr.dist and all
of the mtree calls used in Makefile.inc1. This assumption breaks if/when one
provides a custom TESTSBASE "prefix", e.g. TESTSBASE=/mytests .
One thing that r258233 did properly though was remove "/usr/tests" creation
from BSD.usr.dist -- that should have not been there in the first place. That
was an "oops" on my part for the work that was originally committed in r241823
MFC after: 2 weeks
Phabric: D1301
Reviewed by: imp
Sponsored by: EMC / Isilon Storage Division
UNIX systems, eg. MacOS X and Solaris. It uses Sun-compatible map format,
has proper kernel support, and LDAP integration.
There are still a few outstanding problems; they will be fixed shortly.
Reviewed by: allanjude@, emaste@, kib@, wblock@ (earlier versions)
Phabric: D523
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Force all the contents of /usr/tests to go into a separate distribution
file so that users of binary releases can easily choose to not install it.
To make this possible, we need two fixes:
- bsd.subdir.mk needs to properly honor NO_SUBDIR in all cases so that we
do not recurse into 'tests' subdirectories when we needn't. Otherwise,
we end up with some Kyuafiles in base.txz.
- etc/Makefile needs to skip installing tests in its 'distribute' target
so that a Kyuafile doesn't leak into base.txz.
Approved by: gjb
This change adds tests/ directories in the source tree to create various
subdirectories in /usr/tests/ and to install placeholder Kyuafiles for
them.
the relevant hierarchies are: cddl, etc, games, gnu and secure.
The reason for this is to simplify the addition of new test programs for
utilities or libraries under any of these directories. Doing so on a
case by case basis is unnecessary and is quite an obscure process.
This file is used by pkg(8) from ports as well. Someone may
choose to not install pkg(7) but still want to consume
official packages by building or installing pkg(8) manually.
Discussed with: bapt
MFC after: 1 day (Working on EN)
giving access to functionality that is not available in capability mode
sandbox. The functionality can be precisely restricted.
Start with the following services:
- system.dns - provides API compatible to:
- gethostbyname(3),
- gethostbyname2(3),
- gethostbyaddr(3),
- getaddrinfo(3),
- getnameinfo(3),
- system.grp - provides getgrent(3)-compatible API,
- system.pwd - provides getpwent(3)-compatible API,
- system.random - allows to obtain entropy from /dev/random,
- system.sysctl - provides sysctlbyname(3-compatible API.
Sponsored by: The FreeBSD Foundation
This is to ensure that test-related directories don't get needlessly
created (and later deleted) when MK_TESTS=no.
Problem found by jhb@.
Approved by: rpaulo (mentor)
For now only /etc/pkg/FreeBSD.conf is supported. Its style is:
Repo: {
URL: "...",
MIRROR_TYPE: "...",
...
}
The configuration will be read from /usr/local/etc/pkg.conf if exists,
otherwise /etc/pkg/FreeBSD.conf
Approved by: bapt
MFC after: 2 days
Populate /usr/tests with the only test programs that currently live
in the tree (those in lib/libcrypt/tests/) and add all the build
machinery to accompany this change.
In particular:
- Add a WITHOUT_TESTS variable that users can define to request that
no tests be put in /usr/tests.
- Add a top-level Kyuafile for /usr/tests and a way to create similar
Kyuafiles in top-level subdirectories.
- Add a BSD.tests.dist file to define the directory layout of
/usr/tests.
Submitted by: Julio Merino jmmv google.com
Reviewed by: sjg
MFC after: 2 weeks
But that depends on up-to-date passwd and group files in /etc.
If MK_INSTALL_AS_USER==yes and we are not root, filter the mtree input
to avoid problems with [gu]name and [gu]id settings.
except to document the hardcoded standard library search path for 32-bit
binaries. The third line performs the equivalent substitution for the
private library directory.
Ironically, these entries rely on functionality which is only available
in the COMPAT_32BIT version of rtld-elf.
Approved by: re (blanket)
debug files for userland programs and libraries. The "-g" debug flag
is automatically applied when WITH_DEBUG_FILES is set.
The debug files are now named ${prog}.debug and ${shlib}.debug for
consistency with other systems and documentation. In addition they are
installed under /usr/lib/debug, to simplify the process of installing
them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the
base system place the standalone debug files in a .debug subdirectory.
GDB automatically searches both of these directories for standalone
debug files.
Thanks to everyone who contributed changes, review, and testing during
development.
than number as is done in install so as to differ binding of names to
ids.
Remove the -W flag from the mtree command so that the correct user and
group is recorded rather than the default.
targets to be run without root privilege.
Information about ownership, group, flags, and suid bits are stored in
the file specified by METALOG which defaults to ${DESTDIR}/METALOG.
This file can be used in conjunction with bsdtar or makefs to generate
archives or file system images with correct permissions.
The packageworld target has been altered to use this metadata allowing
non-root releases (subject to further changes in release/Makefile.)
Sponsored by: DARPA, AFRL
Reviewed by: ian, ray
"ln -sfh <bar> <foo>" or the links would fail when a valid link to a
directly was in place at <foo>.
Reported by: peter
Tested by: peter
Pointy hat to: brooks
refactor the link section of distrib-dirs to alwasy install to a full
path (the link contents remain relative as they should).
Eliminate the use of the "rm -r[f] <foo>; ln -s <bar> <foo>" pattern in
favor of "ln -sf <bar> <foo>". None of these links could be directories
on a system installed in the last decade.
Sponsored by: DARPA, AFRL
Reviewed by: mtree
mtree in a shell loop so there is only one mtree commandline. Move the
implementation of LOCAL_MTREE into etc/Makefile.
Sponsored by: DARPA, AFRL
Reviewed by: mtree :)
installing. This allows things like running installworld for 10-CURRENT
on a 9.0-RELEASE system without adding extra users and groups to the
passwd and group files.
To prevent potentially risky uid/gid mismatches on systems with
non-standard local values, require that DESTDIR be set if DB_FROM_SRC is
set.
Sponsored by: DARPA, AFRL
Reviewed by: peter
It also doesn't work with make -s.
Prefer the use of builtin make features.
PR: misc/126312
Reported by: Nejc Skoberne <nejc@skoberne.net>
Submitted by: bdrewery
Approved by: cperciva
MFC after: 1 week
but committing it helps to get everyone on the same page and makes
sure we make progress.
Tinderbox breakages that are the result of this commit are entirely
the committer's fault -- in other words: buildworld testing on amd64
only.
Credits follow:
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Sponsored by: Isilon Systems
Based on work by: keramida@
Thanks to: gnn@, mdf@, mlaier@, sjg@
Special thanks to: keramida@
thing it was still used for was to set the "global default" password
hash. Since the stock auth.conf contained nothing but comments, the
global default was actually the first algorithm in crypt(3)'s list,
which happens to be DES; I take the fact that nobody noticed as proof
that it was not used outside of crypt(3).
The only other use in our tree was in the Kerberos support code in
in tinyware's passwd(1). I removed that code in an earlier commit;
it would not have compiled anyway, as it only supported Kerberos IV.
The auth_getval() function is now a stub that always returns NULL,
which has the same effect as a functional auth_getval() with an
empty auth.conf.
MFC after: 3 weeks
comment out the NIS _compat options by default, but leave them in
the file for the convenience of users who want to enable it.
Update the comment in the file accordingly.
Reviewed by: ed
Approved by: re (hrs)
We already modify various configuration files in /etc based on build
configuration. This is not done for nsswitch.conf right now when setting
WITHOUT_NIS. This breaks various utilities, including crond, that depend
on working databases.
Approved by: re (kib)
MFC after: 1 month
A full featured groff is required during buildworld, so build it always
and don't rely on it being present on the host system.
vgrind(1) is tightly coupled to a roff processor and will not be
built/installed when groff is disabled. Also much of the roff'ed
documentation under share/doc will not be built/installed when
WITHOUT_GROFF is defined.
Reviewed by: ru (partial)
utilities and related support files for manual pages, which were previously
controlled by MAN. For POLA, the default depends on MAN, i.e., WITHOUT_MAN
implies WITHOUT_MAN_UTILS and WITH_MAN implies WITH_MAN_UTILS. This patch
is slightly improved by me from:
PR: misc/145212
Just comment out the atrun line instead of completely removing it. It is
not a bad idea to leave it as a reference in case someone decides to
install atrun by hand afterwards.
Right now we have a termcap.small in the tree, but we don't install it.
If we do install this file by default, it is more likely for
applications to work in single user mode.
I am not entirely happy with the contents of this file. In my opinion we
should remove the `dosansi', `pc' and `pc3' entries and replace them
with `vt100' in case someone uses a serial console.
The file does already have entries for `cons25' and `xterm', which is
used most often.
Requested by: brucec
This NTP configuration file points to the [012].pool.ntp.org servers,
which will return a list of geographical local NTP servers.
It uses the best-practice options of "iburst" and "maxpoll 9".
It gives examples on how to use the "restrict" commands, which are
unfortunately not working when you use the pool.ntp.org servers.
It sets up a fudge server so any clients syncing against this server
will always be synced even if we lose the master.
The idea of this file was briefly discussed on -net.
PR: conf/58595
Submitted by: Chris Stenton <jacs@gnome.co.uk>
MFC after: 1 week
easier to maintain custom rules for non-system things like ACPI hotkeys.
/etc/devd.conf is already set up to check this directory, no change needed there.
but there won't be one so root won't be able to login; edit the installed
file to use /bin/sh in this case.
o while here split csh-related files apart from sh and only install them
when requested
control over the result of buildworld and installworld; this especially
helps packaging systems such as nanobsd
Reviewed by: various (posted to arch)
MFC after: 1 month
parts relied on the now removed NET_NEEDS_GIANT.
Most of I4B has been disconnected from the build
since July 2007 in HEAD/RELENG_7.
This is what was removed:
- configuration in /etc/isdn
- examples
- man pages
- kernel configuration
- sys/i4b (drivers, layers, include files)
- user space tools
- i4b support from ppp
- further documentation
Discussed with: rwatson, re
scripts at boot. This is currently disabled by default. /etc/ddb.conf
contains some potentially reasonable default scripts.
PR: conf/119995
Submitted by: Scot Hetzel <swhetzel at gmail dot com> (Earlier version)
X-MFC after: textdumps
it's just a matter of adding a `${_+_}' prefix before each submake
invokation. This allows a dry run to proceed down to, but not
including, leaf commands. (See <sys.mk> for how ${_+_} is set
depending on the number of -n flags.)
This commit includes the following core components:
* sample configuration file for sensorsd
* rc(8) script and glue code for sensorsd(8)
* sysctl(3) doc fixes for CTL_HW tree
* sysctl(3) documentation for hardware sensors
* sysctl(8) documentation for hardware sensors
* support for the sensor structure for sysctl(8)
* rc.conf(5) documentation for starting sensorsd(8)
* sensor_attach(9) et al documentation
* /sys/kern/kern_sensors.c
o sensor_attach(9) API for drivers to register ksensors
o sensor_task_register(9) API for the update task
o sysctl(3) glue code
o hw.sensors shadow tree for sysctl(8) internal magic
* <sys/sensors.h>
* HW_SENSORS definition for <sys/sysctl.h>
* sensors display for systat(1), including documentation
* sensorsd(8) and all applicable documentation
The userland part of the framework is entirely source-code
compatible with OpenBSD 4.1, 4.2 and -current as of today.
All sensor readings can be viewed with `sysctl hw.sensors`,
monitored in semi-realtime with `systat -sensors` and also
logged with `sensorsd`.
Submitted by: Constantine A. Murenin <cnst@FreeBSD.org>
Sponsored by: Google Summer of Code 2007 (GSoC2007/cnst-sensors)
Mentored by: syrinx
Tested by: many
OKed by: kensmith
Obtained from: OpenBSD (parts)
With the first part of my previous Summer of Code work, we get:
-made libalias modular:
-support for 'particular' protocols (like ftp/irc/etcetc) is no more
hardcoded inside libalias, but it's available through external
modules loadable at runtime
-modules are available both in kernel (/boot/kernel/alias_*.ko) and
user land (/lib/libalias_*)
-protocols/applications modularized are: cuseeme, ftp, irc, nbt, pptp,
skinny and smedia
-added logging support for kernel side
-cleanup
After a buildworld, do a 'mergemaster -i' to install the file libalias.conf
in /etc or manually copy it.
During startup (and after every HUP signal) user land applications running
the new libalias will try to read a file in /etc called libalias.conf:
that file contains the list of modules to load.
User land applications affected by this commit are ppp and natd:
if libalias.conf is present in /etc you won't notice any difference.
The only kernel land bit affected by this commit is ng_nat:
if you are using ng_nat, and it doesn't correctly handle
ftp/irc/etcetc sessions anymore, remember to kldload
the correspondent module (i.e. kldload alias_ftp).
General information and details about the inner working are available
in the libalias man page under the section 'MODULAR ARCHITECTURE
(AND ipfw(4) SUPPORT)'.
NOTA BENE: this commit affects _ONLY_ libalias, ipfw in-kernel nat
support will be part of the next libalias-related commit.
Approved by: glebius
Reviewed by: glebius, ru
boot. Autogeneration of nsswitch.conf doesn't makes sense in 7.0
since it's not permitted to upgrade from a pre-nss release without
passing through an intermediate release.
Suggested by: brooks
similar the the Solaris implementation. Repackage the krb5 GSS mechanism
as a plugin library for the new implementation. This also includes a
comprehensive set of manpages for the GSS-API functions with text mostly
taken from the RFC.
Reviewed by: Love Hörnquist Åstrand <lha@it.su.se>, ru (build system), des (openssh parts)
can be useful for when you know that you are doing something that
won't work with the standard settings and different settings are more
appropriate.
This allows 5.3 tools to build a 6.x userland when these
values are set to null.
fast, lightweight, and generally good way for users to keep their
ports trees up to date.
This is version 0.9.4 from the ports tree (sysutils/portsnap) with
the following changes:
1. The experimental pipelined http code is enabled. No seatbelts
in -CURRENT. (^_^)
2. The working directory has moved from /usr/local/portsnap to
/var/db/portsnap (as discussed on -arch two days ago).
3. Portsnap now fetches a list of mirrors (distributed as DNS SRV
records) and selects one randomly. This should help to avoid the
uneven loading which plagues the cvsup mirror network.
4. The license is now 2-clause BSD instead of 3-clause BSD.
5. Various incidental changes to make portsnap fit into the base
system's build mechanics.
X-MFC-After: 6.0-RELEASE
X-MFC-Before: 5.5-RELEASE
X-MFC-To: RELENG_6, RELENG_5, ports
discussed on: -arch and several other places
"yes please" from: simon, remko, flz, Diane Bruce
thinks this is a great idea: bsdimp
Hopes he didn't forget any files: cperciva
to run initdiskless before we run rcorder on /etc/rc.d. To allow this,
move /etc/rc.d/initdiskless to /etc/rc.initdiskless and run it directly
from /etc/rc.
Remove /etc/rc.d/preseedrandom as it is no longer necessicary (we start
with entropy unblocked) and was only used by initdiskless when it
was needed.
Discussed on: freebsd-rc
Repocopy by: peter
automaticly created at boot. There's no need to maintain a list of
files and permissions in multiple places. This also means binary
updates won't stomp on log files.
For the record, utmp is created in etc/rc.d/cleanvar, wtmp and lastlog
in etc/rc.d/var, and the reset via etc/rc.d/newsyslog.
/etc/namedb symlink is created.
2. Incorporate Brian's suggestion to make the link relative. This
is necessary to handle situations (such as mergemaster) where the
user is building a tree in a seperate environment. This will also
fix the problem with the way DESTDIR is set in 'make release'.
3. Add a new knob, NO_BIND_MTREE, as suggested by the folks who
already have stuff in /var/named that they don't want me to mess with.
4. Update make.conf(5) with the new stuff, and correct a few paths
that have changed since I last updated it.
by default when named is enabled. Also, improve our default directory
layout by creating /var/named/etc/namedb/{master|slave} directories,
and use the former for the generated localhost* files.
Rather than using pax to copy device entries, mount devfs in the
chroot directory.
There may be some corner cases where things need to be adjusted,
but overall this structure has been well tested on a production
network, and should serve the needs of the vast majority of users.
UPDATING has instructions on how to do the conversion for those
with existing configurations.
NO_BIND_DNSSEC, NO_BIND_ETC, NO_BIND_NAMED, and NO_BIND_UTILS.
2. Make creation of directories in /usr/include that are only needed
in the WITH_BIND_LIBS case conditional.
Reviewed by: ru, des
