Commit Graph

82 Commits

Author SHA1 Message Date
Ulrich Spörlein
0d9deed52c mdoc: drop redundant .Pp and .LP calls
They have no effect when coming in pairs, or before .Bl/.Bd
2010-10-08 12:40:16 +00:00
Ulrich Spörlein
aa12cea2cc mdoc: order prologue macros consistently by Dd/Dt/Os
Although groff_mdoc(7) gives another impression, this is the ordering
most widely used and also required by mdocml/mandoc.

Reviewed by:	ru
Approved by:	philip, ed (mentors)
2010-04-14 19:08:06 +00:00
Xin LI
db75450166 Give the right value when complaining it being wrong.
Reported by:	danfe
MFC after:	3 days
2010-01-20 18:22:56 +00:00
Ed Schouten
71ccf09269 The last big commit: let usr.sbin/ use WARNS=6 by default. 2010-01-02 11:07:44 +00:00
Xin LI
18814e5069 Add support of using environment variable BURNCD_SPEED to specify
recodring speed.

PR:		bin/140530
Submitted by:	Alexander Best <alexbestms wwu.de>
MFC after:	1 month
2009-12-21 19:27:52 +00:00
David E. O'Brien
613ff97130 Correct the type for the global var accessed in sig handlers. 2009-01-05 16:47:42 +00:00
David E. O'Brien
11a2f37eed Make signal handler safer.
Submitted by:	Jaakko Heinonen <jh@saunalahti.fi>
2008-12-23 17:57:17 +00:00
David E. O'Brien
970bfaf67f burncd(8) doesn't handle signals and interrupting burncd during operation.
For example, ^C (SIGINT) may leave the drive spinning and locked.
This may also happen if you try to write a too-large image to a disc
and burncd(8) exits with an I/O error.

Add signal handling by doing a CDRIOCFLUSH ioctl to attempt to leave
burner in a sane state when burning is interrupted with SIGHUP, SIGINT,
SIGTERM, or in case an I/O error occurs during write.
Note, that blanking will still continue after interrupt but it seems to
finish correctly even after burncd(8) has quit.

Also, while I'm here bump WARNS to "6".

PR:		48730
Submitted by:	Jaakko Heinonen <jh@saunalahti.fi>
2008-12-19 20:20:14 +00:00
Christian Brueffer
f0ea72a038 - Remove MLINKS to nonexistant manpages
- Change some section numbers to match reality
- For MLINKS to manpages from ports, mention which port installs them

MFC after:	3 days
2005-07-14 20:29:08 +00:00
Ruslan Ermilov
de6a1361a5 Fix the "only wrote -1 of 32768 bytes: Input/output error" error message. 2005-05-13 20:06:44 +00:00
Christian Brueffer
756d2046fb Document the device burncd uses by default.
Submitted by:	Christoph Mallon <christoph.mallon@gmx.de>
MFC after:	3 days
2005-05-02 11:59:21 +00:00
Ruslan Ermilov
59a3c79da6 Sort sections. 2005-01-18 20:02:45 +00:00
Ruslan Ermilov
cffad9ed85 The "fixate" command no longer terminates command processing,
so that "eject" following it can happen.
2004-12-21 14:57:37 +00:00
Ruslan Ermilov
5d784aa699 Document -F in usage() and SYNOPSIS. 2004-12-21 14:53:44 +00:00
Ruslan Ermilov
c72068b6a8 Make "burncd ... fixate eject" really work as promised. 2004-12-21 14:49:10 +00:00
Ruslan Ermilov
0207facc8f err() -> errx() 2004-12-17 13:24:22 +00:00
Dag-Erling Smørgrav
f2a9e36629 My fingers keep typing 'burncd data foo fixate eject' instead of 'burncd -e
data foo fixate'.  Humor them.

MFC after:	4 weeks
2004-09-15 19:03:35 +00:00
Dag-Erling Smørgrav
d12187d438 Mechanical whitespace cleanup. 2004-09-15 19:01:08 +00:00
Giorgos Keramidas
ac1ed13853 Refer to the sysutils/cdrtools port now that the sysutils/mkisofs port
has been merged into the former.

PR:		docs/69087
Submitted by:	Janos Mohacsi <janos.mohacsi@bsd.hu>
MFC after:	3 days
2004-07-16 08:53:25 +00:00
Mark Murray
16fc3635f7 Make NULL a (void*)0 whereever possible, and fix the warnings(-Werror)
that this provokes. "Wherever possible" means "In the kernel OR NOT
C++" (implying C).

There are places where (void *) pointers are not valid, such as for
function pointers, but in the special case of (void *)0, agreement
settles on it being OK.

Most of the fixes were NULL where an integer zero was needed; many
of the fixes were NULL where ascii <nul> ('\0') was needed, and a
few were just "other".

Tested on: i386 sparc64
2004-03-05 08:10:19 +00:00
Alfred Perlstein
87d736a28d Use intmax_t to avoid wrap on large images in verbose output. 2003-12-28 13:32:49 +00:00
David E. O'Brien
d89c67bcba Catch up with the latest in device naming. 2003-11-18 02:33:27 +00:00
Pierre Beyssac
c6df222c98 Fix "write from stdin".
Reviewed by:	sos
MFC after:	1 week
2003-07-26 12:14:58 +00:00
Ruslan Ermilov
f062eac425 Assorted mdoc(7) fixes.
Approved by:	re (blanket)
2003-05-22 11:52:23 +00:00
Ruslan Ermilov
aba60fa66b Fixed troff(1) and mdoc(7) warnings.
Approved by:	re (blanket)
2003-05-18 21:05:22 +00:00
Søren Schmidt
08b25cc045 Add support for using the CDROM env var for device to use;
PR: 38178
2003-05-04 10:09:57 +00:00
Søren Schmidt
01c31bbeca Fix filename printing when using -l option.
PR: 43574
2003-05-04 10:03:15 +00:00
Søren Schmidt
295d40f6b6 Dont fixate when doing dvdrw or test writing.
PR:	47195
2003-05-04 09:55:46 +00:00
Søren Schmidt
515b360c81 Default speed is 4 not 1.
PR: 50474
2003-05-04 09:53:05 +00:00
Ruslan Ermilov
ace5be682d mdoc(7) police: Scheduled sweep. 2003-02-24 22:53:26 +00:00
Johan Karlsson
4224228e15 burncd format accepts either 'dvd+rw' or 'dvd-rw' not 'dwd+rw'.
Approved by:	sos
2003-01-23 09:12:09 +00:00
David E. O'Brien
fb5506762d Make fully WARNS=5 clean.
Tested on:	sparc64, x86
2002-12-30 10:57:41 +00:00
Garrett Wollman
2ae92e3e07 Fix printf format errors on 64-bit platforms and make WARNS=5 compliant.
Checked on Alpha and IA32.

Reviewed by:	maintainer timeout
MFC after:	1 week
2002-12-29 22:28:51 +00:00
Søren Schmidt
43ab91c3c6 On drives that returns 00 as 100% done, lower the criteria
for wraparound, 99 was too much for fast drives since they
do not give 99 as the last value, but instead something
in the 90's range.
2002-12-18 07:43:42 +00:00
Ruslan Ermilov
8d5d039f80 Uniformly refer to a file system as "file system".
Approved by:	re
2002-12-12 17:26:04 +00:00
Ruslan Ermilov
c041c1e0d9 mdoc(7) police: markup fixes.
Approved by:	re
2002-11-27 15:31:08 +00:00
Nate Lawson
c115dd45a4 Take care of the case for the default speed (no -s option) also. 2002-10-27 19:44:57 +00:00
Nate Lawson
cfe6d7e913 Move speed units conversion to right before it is used. This catches the
case when the -s option is not used.
2002-10-27 17:43:22 +00:00
Nate Lawson
dfb87d2239 Convert speed into KB/s. This was missed by the previous commit to this file.
MFC after:	3 weeks
2002-10-26 23:32:35 +00:00
Nate Lawson
76ba4ecdad * Add CDRIOC{READ,WRITE}SPEED ioctls to cd(4). Units are in KB/sec.
* Change atapi-cd ioctls to use the same units.
* Change burncd, cdcontrol to convert CDROM speed to KB/sec before
calling the ioctl.  Add a "max" speed option for their command lines.

This change does not break ABI but does change the units passed through
the ioctl so 3rd party software that uses cdrio.h will have to convert
(most likely by multiplying CDROM speed by 177 to get KB/s).

PR:		kern/36845
Submitted by:	Philipp Mergenthaler <p@i609a.hadiko.de> (CAM ioctls)
Reviewed by:	sos, ken
MFC after:	1 month
2002-10-18 22:03:39 +00:00
Søren Schmidt
b2e73852e5 Add DVD+RW support to the ATA driver and burncd. This also closes
PR40430 by "Peter Haight <peterh@sapros.com>" that has semilar patches
included and which I merged with my own work.

HW sponsored by: FreeBSD Foundation & FreeBSD Mall Inc

Enjoy!
2002-08-08 07:59:24 +00:00
Philippe Charnier
490d5836b5 The .Nm utility 2002-07-14 14:47:15 +00:00
Dag-Erling Smørgrav
d397408818 Usage style sweep: spell "usage" with a small 'u'.
Also change one case of blatant __progname abuse (several more remain)
This commit does not touch anything in src/{contrib,crypto,gnu}/.
2002-04-22 13:44:47 +00:00
Søren Schmidt
1e1404db2a Dont quit prematurely when writing from stdin... 2002-04-05 19:35:41 +00:00
Murray Stokely
dfd6b8b8f7 Mention the fact that you must burn an ISO image to your CDR (created
by mkisofs(8) or similar), if you actually intend to mount the data CD
created by burncd.

PR:		bin/35524
Approved by:	sos
MFC after:	3 days
2002-03-28 11:03:42 +00:00
Søren Schmidt
de7997511b Update headers 2002-03-04 21:11:30 +00:00
Søren Schmidt
17744fcb98 fix the wildrunning % counter. 2002-03-04 20:50:16 +00:00
Mike Barcroft
fd8e4ebc8c o Move NTOHL() and associated macros into <sys/param.h>. These are
deprecated in favor of the POSIX-defined lowercase variants.
o Change all occurrences of NTOHL() and associated marcros in the
  source tree to use the lowercase function variants.
o Add missing license bits to sparc64's <machine/endian.h>.
  Approved by: jake
o Clean up <machine/endian.h> files.
o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>.
o Remove prototypes for non-existent bswapXX() functions.
o Include <machine/endian.h> in <arpa/inet.h> to define the
  POSIX-required ntohl() family of functions.
o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>,
  and <sys/param.h>.
o Prepend underscores to the ntohl() family to help deal with
  complexities associated with having MD (asm and inline) versions, and
  having to prevent exposure of these functions in other headers that
  happen to make use of endian-specific defines.
o Create weak aliases to the canonical function name to help deal with
  third-party software forgetting to include an appropriate header.
o Remove some now unneeded pollution from <sys/types.h>.
o Add missing <arpa/inet.h> includes in userland.

Tested on:	alpha, i386
Reviewed by:	bde, jake, tmm
2002-02-18 20:35:27 +00:00
Søren Schmidt
97d35cf5f8 Write the "msinfo" result to stdout instead of stderr 2002-01-05 15:21:05 +00:00
Søren Schmidt
6361070e82 Fix the msinfo command, as mentioned in several PR's. 2001-12-27 10:10:56 +00:00