Commit Graph

256 Commits

Author SHA1 Message Date
John Baldwin
8a9bc9c03b - Use the new resource_disabled() helper function to see if devices are
disabled.
- Change the apm driver to match the acpi driver's behavior by checking to
  see if the device is disabled in the identify routine instead of in the
  probe routine.  This way if the device is disabled it is never created.

Note that a few places (ips(4), Alpha SMP) used "disable" instead of
"disabled" for their hint names, and these hints must be changed to
"disabled".  If this is a big problem, resource_disabled() can always be
changed to honor both names.
2003-07-02 16:09:02 +00:00
Yaroslav Tykhiy
62cc1e0584 Force media autodetection if the device has lost its parameter table.
Previously, any normal I/O on an fdc(4) device would fail with ENXIO
if the device had been opened in non-blocking mode and then closed
prior to the conventional access; that would last until the floppy
disk was ejected and re-inserted to raise the unit attention condition.

Add a clarifying comment.
2003-06-16 08:42:20 +00:00
Yaroslav Tykhiy
f79981aca8 If in non-blocking mode, return EAGAIN instead of ENXIO
on an I/O attempt.  This is needed for consistency with
the concept of the half-opened state of fdc(4).

PR:		kern/52338
2003-06-16 07:50:17 +00:00
Yaroslav Tykhiy
83efe35a66 Always set bio_resid properly in fdstrategy(),
as should every block device strategy routine.
There was at least one evil consequence of not doing so:
Some errors returned by fdstrategy() could be lost (EAGAIN,
in particular.)

PR:		kern/52338 (in the audit-trail)
Discussed with:	bde
2003-06-15 18:13:17 +00:00
Yaroslav Tykhiy
29ec21d1e3 Check whether the floppy type pointer has been set before trying
to access floppy parameters through it.

Note: The DIOCGSECTORSIZE and DIOCGMEDIASIZE handlers withing
fdioctl() couldn't be just moved to below the existing check
for blocking mode because fd->ft can be non-NULL while still
in non-blocking mode (fd->ft can be set with the FD_STYPE ioctl.)

PR:		kern/52338
No MFC:		Not applicable to STABLE
2003-06-15 16:18:58 +00:00
David E. O'Brien
8c9bbf484a Use __FBSDID(). 2003-06-11 00:34:37 +00:00
Poul-Henning Kamp
c7b24d7dcd Remove unused variable.
Found by:       FlexeLint
2003-05-31 18:45:32 +00:00
Poul-Henning Kamp
891619a66d Use bioq_flush() to drain a bio queue with a specific error code.
Retain the mistake of not updating the devstat API for now.

Spell bioq_disksort() consistently with the remaining bioq_*().

#include <geom/geom_disk.h> where this is more appropriate.
2003-04-01 15:06:26 +00:00
Poul-Henning Kamp
8595de4aec Fix a malloc() with no legal modeflag. 2003-03-17 07:26:25 +00:00
Poul-Henning Kamp
1ecc485c1b Call devstat_start_transaction_bio() instead of devstat_start_transaction() 2003-03-15 10:50:44 +00:00
Poul-Henning Kamp
8098046099 Allocate the devstat structure with devstat_new_entry(). 2003-03-08 21:32:59 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Joerg Wunsch
294d88444b Bail out of fd_clone() if the parsed unit number doesn't match our
expectation.

This solves the problem, where in a constellation with two (or more)
drives, an attempt is made to access a device name for that device
using a historic partition letter, like /dev/fd1c.  This is supposed
to create a symlink to the master device, but previously, the link was
always created to /dev/fd0, even if the request was for fd1*.
2003-01-11 20:10:41 +00:00
Poul-Henning Kamp
2b64426519 Remove calls to cdevsw_add(), they are dreprecated on this branch now. 2002-12-28 21:39:04 +00:00
Maxime Henrion
2ac8c61ac4 Capitalize the first letter of device descriptions
for consistency with the rest of the drivers.
2002-11-11 15:26:08 +00:00
Poul-Henning Kamp
42117b6c4d Fix a probably rare and inconsequential memory leak.
Spotted by:	FlexeLint
2002-10-02 20:29:54 +00:00
Poul-Henning Kamp
c91a63aa2c Add support for DIOCGMEDIASIZE and DIOCGSECTORSIZE.
Remove all traces of disklabel.

Sponsored by:	DARPA & NAI Labs.
2002-09-30 13:53:22 +00:00
Poul-Henning Kamp
419f39ce0f Prefix private BIO commands with "FD" so people get a hint that they
are in fact private.

Sponsored by:	DARPA & NAI Labs.
2002-09-30 13:42:06 +00:00
Poul-Henning Kamp
37c841831f Be consistent about "static" functions: if the function is marked
static in its prototype, mark it static at the definition too.

Inspired by:    FlexeLint warning #512
2002-09-28 17:15:38 +00:00
Poul-Henning Kamp
f90c382c0c Make FreeBSD "struct disklabel" agnostic, step 311 of 723:
Rename diskerr() to disk_err() for naming consistency.

Drop the by now entirely useless struct disklabel argument.

Add a flag argument for new-line termination.

Fix a couple of printf-format-casts to %j instead of %l.

Correctly print the name of all bio commands.

Move the function from subr_disklabel.c to subr_disk.c,
and from <sys/disklabel.h> to <sys/disk.h>.

Use the new disk_err() throughout, #include <sys/disk.h> as needed.

Bump __FreeBSD_version for the sake of the aac disk drivers #ifdefs.

Remove unused disklabel members of softc for aac, amr and mlx, which seem
to originally have been intended for diskerr() use, but which only rotted
and got Copy&Pasted at least two times to many.

Sponsored by:   DARPA & NAI Labs.
2002-09-20 12:52:03 +00:00
Poul-Henning Kamp
c3bdb2f779 Suitably shrink a comment so it applies again.
Submitted by:	bde
2002-09-15 21:25:55 +00:00
Poul-Henning Kamp
02aad38c79 Fix a bug were a struct bio was freed and certain members subsequently
examined.  Use biowait() instead of DIY.
2002-09-13 11:37:38 +00:00
Joerg Wunsch
9a5e3ddb2d Pass the physical instead of the logical block number in
bp->bio_pblkno.  Otherwise, all formats not using 512 byte
physical sectors got screwed.
2002-09-12 20:53:50 +00:00
Joerg Wunsch
a2642c4d67 After some comments from bde, rewrite the loops to avoid turning the
previously used "micro-optimization" (count-down loop) into a
pessimization.  Now the loops are written in the more natural count-up
form.

Also, while being there, i made the logic in out_fdc() similar to the
logic in in_fdc().  The old implementation was a bit bogus anyway
since it first tested the DIO bit and only afterwards the RQM bit.
However, according to the description of the i82077, the DIO bit is
only guaranteed to be valid once the RQM bit is set.  Thus, the old
implementatoin would have had the chance to misbehave on a controller
that is implemented in accordance with the i82077 description (but is
not bug-for-bug compatible).

MFC after:	3 days
2002-05-14 21:28:45 +00:00
Joerg Wunsch
8a0ba81859 style(9) changes before further editing that region:
. add unnecessary parenthesis around return values
. put body of an "if" statement onto a line of its own
2002-05-13 10:28:20 +00:00
Joerg Wunsch
5613959d84 Hide the fd autoselection messages behind the bootverbose case so they
stop bothering people on their consoles.
2002-05-12 17:17:46 +00:00
Joerg Wunsch
cb38bb6c36 Increase the PIO timeout to approximately the value it used to have
before rev 1.229 (~ 100 ms).  According to bde, some (old) broken
hardware could require it.  In order to make timing more accurate than
what could be achieved with a loop around DELAY(1), increase loop
timing after the initial ~ 1 ms.

Also, move the declaration of FDSTS_TIMEOUT out from fdreg.h into fd.c
where it actually belongs to.

MFC after:	2 days
2002-05-12 15:24:21 +00:00
Joerg Wunsch
d0900d6bc0 Change the PIO loops from a hard counter into a loop that calls DELAY()
in each cycle, with a tunable max cycle count defined in fdreg.h.

This is said to fix the problem on some Compaq hardware (and perhaps
on other machines using the Natsemi PC87317 chip) where the fdc(4)
driver failed to operate at all.

PR:		kern/21397
Submitted by:	Jung-uk Kim <jkim@niksun.com>
MFC after:	3 days
2002-05-10 17:56:39 +00:00
Joerg Wunsch
84954bb898 When reading a UFS-style label from a floppy, don't attempt to use a
"raw partition" of any kind since the floppy driver doesn't support
UFS-style partitions at all.

Reported by:	"Crist J. Clark" <crist.clark@attbi.com>
Reviewed by:	bde
MFC after:	3 days
2002-04-02 18:29:43 +00:00
John Baldwin
44731cab3b Change the suser() API to take advantage of td_ucred as well as do a
general cleanup of the API.  The entire API now consists of two functions
similar to the pre-KSE API.  The suser() function takes a thread pointer
as its only argument.  The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0.  The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.

Discussed on:	smp@
2002-04-01 21:31:13 +00:00
Poul-Henning Kamp
d306122d60 Push BIO_FORMAT into a local hack inside the floppy drivers where
it belongs.
2002-03-26 19:16:37 +00:00
Poul-Henning Kamp
817988be19 Disksort will not "munge" requests, BIO_ORDERED or not, so remove
use of BIO_ORDERED.
2002-02-22 09:14:06 +00:00
Joerg Wunsch
038d1bbd1a Change the test for _MACHINE_ARCH == i386 into #ifdef __i386__ since it
otherwise breaks on the Alpha arch.  I think this is wrong since i'd
actually like to probe for a PC architecture, not for a particular CPU
type.  Anyway, now it's again the way it used to be.
2001-12-18 22:16:33 +00:00
Yoshihiro Takahashi
5229d0a11d Remove PC98 code. This file is not used by PC98. 2001-12-16 05:37:22 +00:00
Joerg Wunsch
1a6bed6863 Long promised major enhancement set for the floppy disk driver:
. The main device node now supports automatic density selection for
  commonly used media densities.  So you can stuff your 1.44 MB and
  720 KB media into your drive and just access /dev/fd0, no questions
  asked.  It's all that easy, isn't it? :)

. Device density handling has been completely overhauled.  The old way
  of hardwired kernel density knowledge is no longer there.  Instead,
  the kernel now implements 16 subdevices per drive.  The first
  subdevice uses automatic density selection, while the remaining 15
  devices are freely programmable.  They can be assigned an arbitrary
  name of the form /dev/fd[:digit]+.[:digit:]{1,4}, where the second
  number is meant to either implement device names that are mnemonic
  for their raw capacity (as it used to be), or they can alternatively
  be created as "anonymous" devices like fd0.1 through fd0.15,
  depending on the taste of the administrator.  After creating a
  subdevice, it is initialized to the maximal native density of the
  respective drive type, so it needs to be customized for other
  densities by using fdcontrol(8).  Pseudo-partition devices (fd0a
  through fd0h) are still supported as symlinks.

. The old hack to use flags 0x1 to always assume drive 0 were there is
  no longer supported; this is now supposed to be done by wiring the
  devices down from the loader via device flags.  On IA32
  architectures, the first two drives are looked up in the CMOS
  configuration records though.  On PCMCIA (i. e., the Y-E Data
  controller of the Toshiba Libretto), a single drive is always
  assumed.

. Other specialities like disabling the FIFO and not probing the drive
  at boot-time are selected by per-controller or per-drive flags, too.

. Unit attentions (media has been changed) are supposed to be detected
  now; density autoselection only occurs after a unit attention.  (Can
  be turned off by a per-drive flag, this will cause each Fdopen() to
  perform the autoselection.)

. FM floppies can be handled now (on controllers that actually support
  it -- not all do these days).

. Fdopen() can be told to avoid density selection by setting
  O_NONBLOCK; this leaves the descriptor in a half-opened state where
  only a few ioctls are accepted.  This is necessary to run fdformat
  on a device that uses automatic density selection (since you cannot
  autoselect on an unformatted medium, obviously).

. Just differentiate between a plain old NE765 and the enhanced chips,
  but don't try more; the existing code was wrong and only misdetected
  the chips anyway.

BUGS and TODOs:

. All documentation update still needs to be done.

. Formatting not-so-standard format yields unpredictable results; i
  have yet to figure out why this happens.  "Standard" formats like
  720 and 1440 KB do work, however.

. rc scripts are needed to setup device nodes with nonstandard
  densities (like the old /dev/fdN.MMM we used to have).

. Obtaining device flags from the kernel environment doesn't work yet,
  thus currently only drives that are present in (IA32) CMOS are
  really detected.  Someone who knows the odds and ends about device
  flags is needed here, i can't figure out what i'm doing wrong.

. 2.88 MB still needs to be done.
2001-12-15 19:09:04 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Mike Smith
5f063c7b09 Add ACPI attachments. 2001-08-30 09:17:03 +00:00
Joerg Wunsch
3a5c2c86a8 Hrmpf. nyan's rev 1.25 commit to fdc.h crossed with my removal of it.
Back-integrate his (PC98) changes into fd.c.
2001-07-14 20:28:02 +00:00
Joerg Wunsch
246ed35d55 Yet another large non-function change.
. Integrate fdc.h into fd.c, with the removal of ft(4) there's no longer
  a reason to scatter things across two files.

. Sanitize comments.  Convert them into the style(9)-recommended
  multi-line form, make them sentences where apprpriate, etc.

. Declare all functions on top, and declare them in the order they
  appear in the file.  This order is totally chaotic, but Bruce
  convinced me that reordering the file wouldn't make it better either.

. Kill a `possibly uninitialized' warning (only seen with -O2) in
  fd_read_status().

. Make the comments at return (0|1) statements in fdstate() consistent.

. Nuke a ``keep the compiler happy'' dummy return at the end of fdstate(),
  gcc is smart enough to detect that it would never be reached anyway.
2001-07-14 20:25:01 +00:00
Joerg Wunsch
0e17a5bcdb Log when the user is turning debugging on/off.
Also sanitize the TRACE* macros a bit so they syntactically behave like
single C statements (even inside in `if' statement).

Submitted by:	des
2001-07-09 21:11:10 +00:00
Joerg Wunsch
5d54fe9172 Hmpf, remove two variables that got unused by rev 1.214. 2001-07-09 21:00:02 +00:00
Joerg Wunsch
83edbfa5ff Ouch, calculate correctly. With 300 rpm and 25 retries, it's 5 seconds
till timeout.
2001-07-09 20:53:19 +00:00
Joerg Wunsch
e3b525a006 Remove parts of rev 1.211 again: do not delete our children iff they
haven't been probed successfully.  It's a known bug that ISA hints
processing instantiates those devices, and prematurely killing them
has other unwanted side-effects.
2001-07-09 20:50:41 +00:00
Joerg Wunsch
3fef646ef0 As des' example shows us, DMA overruns could happen in a situation
where they will never succeed.  Add a stop-gap measure that will at
least eventually timeout the operation instead of retrying it
indefinately.

MFC after:	1 month
2001-07-09 20:46:45 +00:00
Joerg Wunsch
fb35bd37f2 Another large patchset from Bruce.
Despite of a few cosmetic things like adding ``irritating silly
parentheses'' around all return values, this mainly improves FDC reset
handling by no longer gratuitously resetting the FDC all the time
(which causes it to lose the notion of the current track) but only in
case of errors, and it sanitizes the block and offset calculations in
fdstrategy() and fdstate().  Some additional cleanup added by me, in
particular the large switch in fdstate() now always uses return to
break out, and no branch falls off the end of the switch statement
anymore.  Per Bruce's suggestion, removed M_NOWAIT from the malloc()s
to simplify things.

Submitted by:	bde (mostly)
2001-07-08 20:50:20 +00:00
Joerg Wunsch
6044485346 More cleanup when detaching. Clone device entries will now be
destroyed properly (otherwise bad things would happen after a clone
dev had been created, and the module was kldunloaded).  Allocated
children that have not successfully probed are being deleted again
(otherwise fd0 and fd1 have always been allocated, even if only
fd0 was acutally present, and fd1 even survived kldunloading the
module).

Still, kldunloading leaves remnants of the previously existing devices
intact.  Why doesn't it destroy all the devices?  As a consequence,
since dev->descr now points into no longer allocated memory, the
system panics deep inside printf(9) when running devinfo(1) after
kldunloading the module.  Ideas sought...

Also, when kldloading the module on a hints-populated isab0, this bus
somehow has already created an fdc0 entry (a dummy) so the load
attempt fails and will register fdc1 instead.  What are those dummy
entries for?  Loading the module from the bootloader works, and it
can be unloaded an re-loaded then later.
2001-07-04 22:10:33 +00:00
Joerg Wunsch
f664aeee49 Use the new-born BIO_CMD1 instead of fudging a bio_flag value for reading
the sector ID.

Based on numerous comments made by Bruce, rewrite a good part of the
old fdformat() function, and merge it with fdreadid() into a single
unified fdmisccmd() function.  Various style and a couple of more
serious bugs fixed there.

While i was at it, i also fixed the long-standing "TODO: don't
allocate buffer on stack." in fdcioctl(), fixed a number of style bugs
there, and finally implemented the FD_DEBUG ioctl command that has
been advertised in <sys/fdcio.h> (formerly <machine/ioctl_fd.h>) for
almost seven years now. ;-)

Submitted by:	bde (a lot of fixes for fdformat())
2001-06-29 15:30:48 +00:00
Joerg Wunsch
5f431174f3 This change slipped through hidden in a CVS conflict. Logically belongs
to the previous commit (fix resource deallocation).
2001-06-29 07:53:45 +00:00
Joerg Wunsch
e219897a2a First stab at fixing resource deallocation, and implementing fdc(4) as
a KLD.  Still doesn't work well except in the PCMCIA case (now if only
pccardd(8) could load and unload drivers dynamically...).  Mainly, it
tries to find fdc0 on the PCI bus for whatever obscure reasons, but i
need someone who understands driver(9) to fix this.  However, it's at least
already better than before, and i'm tired of maintaining too many private
changes in my tree, given the large patches bde submitted. :)

Idea of a KLD triggered by:	Michael Reifenberger <root@nihil.plaut.de>
2001-06-29 07:36:29 +00:00
Joerg Wunsch
64860614a4 Merge in parts of a larger patchset i received from Bruce. Untested
by now (except of a compile test), but i believe this to contain no
actual functional changes.

. Fix the copyright of the Regents i accidentally broke in rev 1.197
  (although only a very small part of the original driver survived
  at all...).

. Bump MAX_CYLINDER since some obscure formats really use more than 80
  cylinders.

. Correctly handle BIO_FORMAT which used to be a bitmask but is now a BIO
  command of its own.

. Numerous stylistic fixes.

Submitted by:	bde
2001-06-28 12:35:28 +00:00