Suggested-by: Bernd Walter (ticso@cicely.de)
Add key pairs for 'mv' and 'move' (a synonym for 'mv'). Required for
the move command code submitted by Marius Bendiksen
<marius@marius.scancall.no>
make_devices: Don't create symlinks for drives if they are only
referenced. Previously, spurious symlinks appeared in the current
directory.
Problem-reported-by: Bernd Walter (ticso@cicely.de)
No longer create character devices, now that there is no difference.
Make the devices as character devices, not block devices.
on alpha.
Submitted-by: Bernd Walter <ticso@cicely.de>
Replace %q formats with %lld.
Desired-by: bde
Remove #ifdef RAID5
vinum_lsi: If a subdisk is in 'reviving' state, check the status of
the revive and report the status of the revive. In verbose mode,
display the pid of the reviver.
on alpha.
Submitted-by: Bernd Walter <ticso@cicely.de>
Add function vinum_mv, which moves subdisks to different drives. This
function just does the low-level configuration changes; the resultant
subdisk is stale if it previously had any contents, otherwise it is
empty (i.e. in need of initializing if it's RAID-5). We still need to
handle getting the contents moved over, but the current version will
suffice to migrate subdisks from a disk which has failed.
Submitted-by: Marius Bendiksen <marius@marius.scancall.no>
vinum_start: Get the revive block size right.
into vnode dirtyblkhd we append it to the list instead of prepend it to
the list in order to maintain a 'forward' locality of reference, which
is arguably better then 'reverse'. The original algorithm did things this
way to but at a huge time cost.
Enhance the append interlock for NFS writes to handle intr/soft mounts
better.
Fix the hysteresis for NFS async daemon I/O requests to reduce the
number of unnecessary context switches.
Modify handling of NFS mount options. Any given user option that is
too high now defaults to the kernel maximum for that option rather then
the kernel default for that option.
Reviewed by: Alfred Perlstein <bright@wintelcom.net>
Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the
Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com
3c19250 and the ADS Technologies USB-10BT. This device is 10mbs
half-duplex only, so there's miibus or ifmedia support. This device
also requires firmware to be loaded into it, however KLSI allows
redistribution of the firmware images (I specifically asked about
this; they said it was ok).
Special thanks to Annelise Anderson for getting me in touch with
KLSI (eventually) and thanks to KLSI for providing the necessary
programming info.
Highlights:
- Add driver files to /sys/dev/usb
- update usbdevs and regenerate attendate files
- update usb_quirks.c
- Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha
- Update LINT, GENERIC and others for i386, alpha and pc98
- Add man page
- Add module
- Update sysinstall and userconfig.c
was calling nfs_flush() and then clearing the NMODIFIED bit. This is
not legal since there might still be dirty buffers after the nfs_flush
(for example, pending commits). The clearing of this bit in turn prevented
a necessary vinvalbuf() from occuring leaving left over dirty buffers
even after truncating the file in a new operation. The fix is to
simply not clear NMODIFIED.
Also added a sysctl vfs.nfs.nfsv3_commit_on_close which, if set to 1,
will cause close() to do a stage 1 write AND a stage 2 commit
synchronously. By default only the stage 1 write is done synchronously.
Reviewed by: Alfred Perlstein <bright@wintelcom.net>
the low level interrupt handler number should be used. Change
setup_apic_irq_mapping() to allocate low level interrupt handler X (Xintr${X})
for any ISA interrupt X mentioned in the MP table.
Remove an assumption in the driver for the system clock (clock.c) that
interrupts mentioned in the MP table as delivered to IOAPIC #0 intpin Y
is handled by low level interrupt handler Y (Xintr${Y}) but don't assume
that low level interrupt handler 0 (Xintr0) is used.
Don't allocate two low level interrupt handlers for the system clock.
Reviewed by: NOKUBI Hirotaka <hnokubi@yyy.or.jp>
o s/unsigned/unsigned int/g
o Add -Wall
btxld can now be built as a cross-tool for cross-building i386/pc98 on
platforms that don't have btxld (such as alpha).
hardpps() produced offset component. This is tested and behaved
stable with frequency offsets from -338.05 to +499.91 PPM.
Interestingly the machine I tested this on would fail if the clock
were slower than 14.3132 MHz whereas it was perfectly happy to run
at 16.384 MHz, in other words [-340PPM ... +14.4%]
Make pps_shift tweakable with sysctl.
driver seems relatively functional, but could use some souping up,
particularly in the performance area. This has both NetBSD and FreeBSD
attachment code and a fair amount of effort has been put into making
it easy to port to different *BSD platforms.
The basic design is a one tfd per mbuf transmit (with no transmit
related interrupts- tfds are gc'd as needed). The receive ring
uses a 2K buffer per rfd with a +2 byte adjust for the ethernet
header (so the payload is aligned). There's support that *almost*
works for doing large packets- the rfd chaining code works, but there's
some problem with getting good checksums at the IP reassembly level
(ditto for doing short tfd's too).
The chip has support for TCP checksums insertion for transmit and
TCP checksum calculation on receive (for both you have to do some
appropriate backoff && twiddling), but this isn't in place.
This is nearly entirely reverse engineered from the released Intel
driver, so there's a lot of "We have to do this but do not know why"
stuff. There is somebody who has the chip specs who works in FreeBSD
but they're being a bit standoffish about even sharing hints which
is somewhat annoying. It's also apparent that all I had to work with
were the first rev boards.
This driver has been lightly tested on intel && alpha, but only
point-to-point. There may be some issues with switches- use of
boot time environment variables that override EEPROM settings
(e.g., 'set wx_ilos=1' which inverts the sense of optical signal
loss) may help with this.
I had this out for review for three weeks, and nobody said anything
negative or positive, ergo, this checkin has no 'reviewed by' field
which I would have preferred.
* Remove "why we need this decl..." comment. The `matcher' variable
is defined in *grepmat.c files in the original distribution, which
we did not import.
has it blacklisted. Silly us for not planning ahead. Tsk. Anyway-
a 10 year window patch is probably sufficient to still detect
nonsense in the clock but allow us to roll past the year 2000.
