Commit Graph

23 Commits

Author SHA1 Message Date
Daniel Eischen
cc24e83605 Move idle kse wakeup to outside of regions where locks are held.
This eliminates ping-ponging of locks, where the idle KSE wakes
up only to find the lock it needs is being held.  This gives
little or no gain to M:N mode but greatly speeds up 1:1 mode.

Reviewed & Tested by:	davidxu
2003-07-23 02:11:07 +00:00
Daniel Eischen
1cb570c531 Change low-level locking a bit so that we can tell if
a lock is being waitied on.

Fix a races in join and cancellation.

When trying to wait on a CV and the library is not yet
threaded, make it threaded so that waiting actually works.

When trying to nanosleep() and we're not threaded, just
call the system call nanosleep instead of adding the thread
to the wait queue.

Clean up adding/removing new threads to the "all threads queue",
assigning them unique ids, and tracking how many active threads
there are.  Do it all when the thread is added to the scheduling
queue instead of making pthread_create() know how to do it.

Fix a race where a thread could be marked for signal delivery
but it could be exited before we actually add the signal to it.

Other minor cleanups and bug fixes.

Submitted by:	davidxu
Approved by:	re@ (blanket for libpthread)
2003-05-24 02:29:25 +00:00
Daniel Eischen
55613576f5 o Don't add a scope system thread's KSE to the list of available
KSEs when it's thread exits; allow the GC handler to do that.

o Make spinlock/spinlock critical regions.

The following were submitted by davidxu

  o Alow thr_switch() to take a null mailbox argument.

  o Better protect cancellation checks.

  o Don't set KSE specific data when creating new KSEs; rely on the
    first upcall of the KSE to set it.

  o Add the ability to set the maximum concurrency level and do this
    automatically.  We should have a way to enable/disable this with
    some sort of tunable because some applications may not want this
    to be the default.

  o Hold the scheduling lock across thread switch calls.

  o If scheduling of a thread fails, make sure to remove it from the list
    of active threads.

  o Better protect accesses to a joining threads when the target thread is
    exited and detached.

  o Remove some macro definitions that are now provided by <sys/kse.h>.

  o Don't leave the library in threaded mode if creation of the initial
    KSE fails.

  o Wakeup idle KSEs when there are threads ready to run.

  o Maintain the number of threads active in the priority queue.
2003-04-28 23:56:12 +00:00
Daniel Eischen
e4c2ac1637 Sorry folks; I accidentally committed a patch from what I was working
on a couple of days ago.  This should be the most recent changes.

Noticed by:	davidxu
2003-04-18 07:09:43 +00:00
Daniel Eischen
a0240e2cb0 Revamp libpthread so that it has a chance of working in an SMP
environment.  This includes support for multiple KSEs and KSEGs.

The ability to create more than 1 KSE via pthread_setconcurrency()
is in the works as well as support for PTHREAD_SCOPE_SYSTEM threads.
Those should come shortly.

There are still some known issues which davidxu and I are working
on, but it'll make it easier for us by committing what we have.

This library now passes all of the ACE tests that libc_r passes
with the exception of one.  It also seems to work OK with KDE
including konqueror, kwrite, etc.  I haven't been able to get
mozilla to run due to lack of java plugin, so I'd be interested
to see how it works with that.

Reviewed by:	davidxu
2003-04-18 05:04:16 +00:00
Jonathan Mini
cc118d869b Make the changes needed for libpthread to compile in its new home.
The new libpthread will provide POSIX threading support using KSE.
These files were previously repo-copied from src/lib/libc_r.

Reviewed by:	deischen
Approved by:	-arch
2002-09-16 08:45:36 +00:00
Daniel Eischen
ca4b2c1a79 Properly clear the status of a join operation if the joining thread is
canceled or the joinee is detached.
2002-03-06 19:28:41 +00:00
Jason Evans
6699b0c6fe Instead of using a join queue for each thread, use a single pointer to
keep track of a joiner.  POSIX only supports a single joiner, so this
simplification is acceptable.

At the same time, make sure to mark a joined thread as detached so that
its resources can be freed.

Reviewed by:	deischen
PR:		24345
2001-05-20 23:08:33 +00:00
Daniel Eischen
437df4859a To be consistent, use the __weak_reference macro from <sys/cdefs.h>
instead of #pragma weak to create weak definitions.

Suggested by:	bde
2001-04-10 04:19:21 +00:00
Daniel Eischen
e5106342c6 Add weak definitions for wrapped system calls. In general:
_foo - wrapped system call
	foo - weak definition to _foo

and for cancellation points:

	_foo - wrapped system call
	__foo - enter cancellation point, call _foo(), leave
	        cancellation point
	foo - weak definition to __foo

Change use of global _thread_run to call a function to get the
currently running thread.

Make all pthread_foo functions weak definitions to _pthread_foo,
where _pthread_foo is the implementation.  This allows an application
to provide its own pthread functions.

Provide slightly different versions of pthread_mutex_lock and
pthread_mutex_init so that we can tell the difference between
a libc mutex and an application mutex.  Threads holding mutexes
internal to libc should never be allowed to exit, call signal
handlers, or cancel.

Approved by:	-arch
2001-01-24 13:03:38 +00:00
Daniel Eischen
b5a8a15c2f Don't needlessly poll file descriptors when there are no
file descriptors needing to be polled (Doh!).  Reported
by Dan Nelson <dnelson@emsphone.com>.

Don't install and start the scheduling timer until the
first thread is created.  This prevents the overhead of
having a periodic scheduling signal in a single threaded
program.  Reported by Dan Nelson <dnelson@emsphone.com>.

Allow builtin longjmps out of application installed
signal handlers without the need perform any post-handler
cleanup:

  o Change signal handling to save the threads interrupted
    context on the stack.  The threads current context is
    now always stored in the same place (in the pthread).
    If and when a signal handler returns, the interrupted
    context is copied back to the storage area in the pthread.

  o Before calling invoking a signal handler for a thread,
    back the thread out of any internal waiting queues
    (mutex, CV, join, etc) to which it belongs.

Rework uthread_info.c a bit to make it easier to change
the format of a thread dump.

Use an alternal signal stack for the thread library's
signal handler.  This allows us to fiddle with the main
threads stack without fear of it being in use.

Reviewed by:	jasone
2000-11-09 05:08:26 +00:00
Daniel Eischen
fbeb36e4bf Implement zero system call thread switching. Performance of
thread switches should be on par with that under scheduler
activations.

  o Timing is achieved through the use of a fixed interval
    timer (ITIMER_PROF) to count scheduling ticks instead
    of retrieving the time-of-day upon every thread switch
    and calculating elapsed real time.

  o Polling for I/O readiness is performed once for each
    scheduling tick instead of every thread switch.

  o The non-signal saving/restoring versions of setjmp/longjmp
    are used to save and restore thread contexts.  This may
    allow the removal of _THREAD_SAFE macros from setjmp()
    and longjmp() - needs more investigation.

Change signal handling so that signals are handled in the
context of the thread that is receiving the signal.  When
signals are dispatched to a thread, a special signal handling
frame is created on top of the target threads stack.  The
frame contains the threads saved state information and a new
context in which the thread can run.  The applications signal
handler is invoked through a wrapper routine that knows how
to restore the threads saved state and unwind to previous
frames.

Fix interruption of threads due to signals.  Some states
were being improperly interrupted while other states were
not being interrupted.  This should fix several PRs.

Signal handlers, which are invoked as a result of a process
signal (not by pthread_kill()), are now called with the
code (or siginfo_t if SA_SIGINFO was set in sa_flags) and
sigcontext_t as received from the process signal handler.

Modify the search for a thread to which a signal is delivered.
The search algorithm is now:

  o First thread found in sigwait() with signal in wait mask.
  o First thread found sigsuspend()'d on the signal.
  o Current thread if signal is unmasked.
  o First thread found with signal unmasked.

Collapse machine dependent support into macros defined in
pthread_private.h.  These should probably eventually be moved
into separate MD files.

Change the range of settable priorities to be compliant with
POSIX (0-31).  The threads library uses higher priorities
internally for real-time threads (not yet implemented) and
threads executing signal handlers.  Real-time threads and
threads running signal handlers add 64 and 32, respectively,
to a threads base priority.

Some other small changes and cleanups.

PR:		17757 18559 21943
Reviewed by:	jasone
2000-10-13 22:12:32 +00:00
Daniel Eischen
1752e66d49 -Wall and minor style(9) cleanups. 1999-12-28 18:13:04 +00:00
Peter Wemm
7f3dea244c $Id$ -> $FreeBSD$ 1999-08-28 00:22:10 +00:00
Daniel Eischen
fa7c4d5575 Add RCS IDs to those files without them.
Fix copyrights (s/REGENTS/AUTHOR).

Suggested by:	tg
Approved by:	jb
1999-08-05 12:15:30 +00:00
John Birrell
02292f131a In the words of the author:
o The polling mechanism for I/O readiness was changed from
    select() to poll().  In additon, a wrapped version of poll()
    is now provided.

  o The wrapped select routine now converts each fd_set to a
    poll array so that the thread scheduler doesn't have to
    perform a bitwise search for selected fds each time file
    descriptors are polled for I/O readiness.

  o The thread scheduler was modified to use a new queue (_workq)
    for threads that need work.  Threads waiting for I/O readiness
    and spinblocks are added to the work queue in addition to the
    waiting queue.  This reduces the time spent forming/searching
    the array of file descriptors being polled.

  o The waiting queue (_waitingq) is now maintained in order of
    thread wakeup time.  This allows the thread scheduler to
    find the nearest wakeup time by looking at the first thread
    in the queue instead of searching the entire queue.

  o Removed file descriptor locking for select/poll routines.  An
    application should not rely on the threads library for providing
    this locking; if necessary, the application should use mutexes
    to protect selecting/polling of file descriptors.

  o Retrieve and use the kernel clock rate/resolution at startup
    instead of hardcoding the clock resolution to 10 msec (tested
    with kernel running at 1000 HZ).

  o All queues have been changed to use queue.h macros.  These
    include the queues of all threads, dead threads, and threads
    waiting for file descriptor locks.

  o Added reinitialization of the GC mutex and condition variable
    after a fork.  Also prevented reallocation of the ready queue
    after a fork.

  o Prevented the wrapped close routine from closing the thread
    kernel pipes.

  o Initialized file descriptor table for stdio entries at thread
    init.

  o Provided additional flags to indicate to what queues threads
    belong.

  o Moved TAILQ initialization for statically allocated mutex and
    condition variables to after the spinlock.

  o Added dispatching of signals to pthread_kill.  Removing the
    dispatching of signals from thread activation broke sigsuspend
    when pthread_kill was used to send a signal to a thread.

  o Temporarily set the state of a thread to PS_SUSPENDED when it
    is first created and placed in the list of threads so that it
    will not be accidentally scheduled before becoming a member
    of one of the scheduling queues.

  o Change the signal handler to queue signals to the thread kernel
    pipe if the scheduling queues are protected.  When scheduling
    queues are unprotected, signals are then dequeued and handled.

  o Ensured that all installed signal handlers block the scheduling
    signal and that the scheduling signal handler blocks all
    other signals.  This ensures that the signal handler is only
    interruptible for and by non-scheduling signals.  An atomic
    lock is used to decide which instance of the signal handler
    will handle pending signals.

  o Removed _lock_thread_list and _unlock_thread_list as they are
    no longer used to protect the thread list.

  o Added missing RCS IDs to modified files.

  o Added checks for appropriate queue membership and activity when
    adding, removing, and searching the scheduling queues.  These
    checks add very little overhead and are enabled when compiled
    with _PTHREADS_INVARIANTS defined.  Suggested and implemented
    by Tor Egge with some modification by me.

  o Close a race condition in uthread_close.  (Tor Egge)

  o Protect the scheduling queues while modifying them in
    pthread_cond_signal and _thread_fd_unlock.  (Tor Egge)

  o Ensure that when a thread gets a mutex, the mutex is on that
    threads list of owned mutexes.  (Tor Egge)

  o Set the kernel-in-scheduler flag in _thread_kern_sched_state
    and _thread_kern_sched_state_unlock to prevent a scheduling
    signal from calling the scheduler again.  (Tor Egge)

  o Don't use TAILQ_FOREACH macro while searching the waiting
    queue for threads in a sigwait state, because a change of
    state destroys the TAILQ link.  It is actually safe to do
    so, though, because once a sigwaiting thread is found, the
    loop ends and the function returns.  (Tor Egge)

  o When dispatching signals to threads, make the thread inherit
    the signal deferral flag of the currently running thread.
    (Tor Egge)

Submitted by: Daniel Eischen <eischen@vigrid.com> and
              Tor Egge <Tor.Egge@fast.no>
1999-06-20 08:28:48 +00:00
John Birrell
58a7cc5d1b [ The author's description... ]
o Runnable threads are now maintained in priority queues.  The
    implementation requires two things:

      1.) The priority queues must be protected during insertion
          and removal of threads.  Since the kernel scheduler
          must modify the priority queues, a spinlock for
          protection cannot be used.   The functions
          _thread_kern_sched_defer() and _thread_kern_sched_undefer()
          were added to {un}defer kernel scheduler activation.

      2.) A thread (active) priority change can be performed only
          when the thread is removed from the priority queue.  The
          implementation uses a threads active priority when
          inserting it into the queue.

    A by-product is that thread switches are much faster.  A
    separate queue is used for waiting and/or blocked threads,
    and it is searched at most 2 times in the kernel scheduler
    when there are active threads.  It should be possible to
    reduce this to once by combining polling of threads waiting
    on I/O with the loop that looks for timed out threads and
    the minimum timeout value.

  o Functions to defer kernel scheduler activation were added.  These
    are _thread_kern_sched_defer() and _thread_kern_sched_undefer()
    and may be called recursively.  These routines do not block the
    scheduling signal, but latch its occurrence.  The signal handler
    will not call the kernel scheduler when the running thread has
    deferred scheduling, but it will be called when running thread
    undefers scheduling.

  o Added support for _POSIX_THREAD_PRIORITY_SCHEDULING.  All the
    POSIX routines required by this should now be implemented.
    One note, SCHED_OTHER, SCHED_FIFO, and SCHED_RR are required
    to be defined by including pthread.h.  These defines are currently
    in sched.h.  I modified pthread.h to include sched.h but don't
    know if this is the proper thing to do.

  o Added support for priority protection and inheritence mutexes.
    This allows definition of _POSIX_THREAD_PRIO_PROTECT and
    _POSIX_THREAD_PRIO_INHERIT.

  o Added additional error checks required by POSIX for mutexes and
    condition variables.

  o Provided a wrapper for sigpending which is marked as a hidden
    syscall.

  o Added a non-portable function as a debugging aid to allow an
    application to monitor thread context switches.  An application
    can install a routine that gets called everytime a thread
    (explicitly created by the application) gets context switched.
    The routine gets passed the pthread IDs of the threads that are
    being switched in and out.

Submitted by: Dan Eischen <eischen@vigrid.com>

Changes by me:

  o Added a PS_SPINBLOCK state to deal with the priority inversion
    problem most often (I think) seen by threads calling malloc/free/realloc.

  o Dispatch signals to the running thread directly rather than at a
    context switch to avoid the situation where the switch never occurs.
1999-03-23 05:07:56 +00:00
John Birrell
4a027d50c7 Change signal model to match POSIX (i.e. one set of signal handlers
for the process, not a separate set for each thread). By default, the
process now only has signal handlers installed for SIGVTALRM, SIGINFO
and SIGCHLD. The thread kernel signal handler is installed for other
signals on demand. This means that SIG_IGN and SIG_DFL processing is now
left to the kernel, not the thread kernel.

Change the signal dispatch to no longer use a signal thread, and
call the signal handler using the stack of the thread that has the
signal pending.

Change the atomic lock method to use test-and-set asm code with
a yield if blocked. This introduces separate locks for each type
of object instead of blocking signals to prevent a context
switch. It was this blocking of signals that caused the performance
degradation the people have noted.

This is a *big* change!
1998-04-29 09:59:34 +00:00
John Birrell
ed92686917 Add a magic field to the pthread structure to help recognize valid
threads from invalid ones. The pthread structure is opaque to the user
so this change does not cause any incompatibilities.

Hopefully this change will help code that was written for draft 4
fail gracefully if the programmer ignores the compiler warning about
the change in the level of indirection for the argument passed to
pthread_detach(). I got burnt, so I fixed then (expletive deleted)
thing.

These functions comply with the revised standard. That should shut
Terry up!
1998-04-03 09:31:15 +00:00
Alexander Langer
372787c102 Changed pthread_detach to conform to POSIX, i.e. the single argument
provided is of type pthread_t instead of pthread_t *.

PR:		4320

Return EINVAL instead of ESRCH if attempting to detach an already
detached thread.
1997-12-25 05:07:20 +00:00
Alexander Langer
09bb0da60c Modify the return values to comply with POSIX. Previously these
functions would return -1 and set errno to indicate the specific error.
POSIX requires that the functions return the error code as the return
value of the function instead.
1997-11-25 01:29:16 +00:00
Julian Elischer
c840cec7c5 Submitted by: John Birrell
uthreads update from the author.
1997-02-05 23:26:09 +00:00
Julian Elischer
012dfd00b3 Reviewed by: julian
Submitted by:	 john birrel

One version of the pthreads library
another will follow with differnt actions under some cases..
not QUITE complete
1996-01-22 00:23:58 +00:00