Commit Graph

1465 Commits

Author SHA1 Message Date
Jaakko Heinonen
3535526b15 - Don't return EAGAIN from gv_unload(). It was used to work around the
deadlock fixed in r207671.
- Wait for worker process to exit at class unload. The worker process
  was not guaranteed to exit before the linker unloaded the module.
- Use 0 as the worker process exit status instead of ENXIO and style
  the NOTREACHED comment.

Reviewed by:	lulf
X-MFC after:	r207671
2010-05-10 19:12:23 +00:00
Jaakko Heinonen
5a279fc5fc In g_zero_destroy_geom(), return 0 instead of EBUSY in the success case.
EBUSY was probably used as a workaround for the deadlock fixed in r207671.

Approved by:	pjd
X-MFC after:	r207671
2010-05-10 19:08:53 +00:00
Ulf Lilleengen
42a9ad6697 - Remove obsolete flags.
MFC after:	1 week
2010-05-08 16:19:17 +00:00
Jaakko Heinonen
9061251f9a Fix deadlock between GEOM class unloading and withering. Withering can't
proceed while g_unload_class() blocks the event thread. Fix this by not
running g_unload_class() as a GEOM event and dropping the topology lock
when withering needs to proceed.

PR:		kern/139847
Silence on:	freebsd-geom
2010-05-05 18:53:24 +00:00
Marcel Moolenaar
c74f160cb0 Re-calculate a geometry when reprobing as well.
PR:		kern/145452
Reported by:	"Andrey V. Elsukov" <bu7cher@yandex.ru>
2010-04-25 01:56:39 +00:00
Marcel Moolenaar
6f702278e6 Fix undo for schemes that have internal partitions. Internal partitions
do not constitute user-visible or active partitions and as such should
not prevent undoing pending operations.

While here, initialize the last usable sector for the placeholder geom
based on the null scheme, created to allow undoing the destruction of
a scheme. This gives consistent output with "gpart show".

Based on a patch from:	"Andrey V. Elsukov" <bu7cher@yandex.ru>
2010-04-25 00:54:11 +00:00
Marcel Moolenaar
3f71c319f4 Implement the resize verb and add support for resizing partitions
for all schemes but EBR. Quality work by Andrey!

Submitted by:	"Andrey V. Elsukov" <bu7cher@yandex.ru>
2010-04-23 03:11:39 +00:00
Jaakko Heinonen
002d1d1c38 Fix ddb(4) "show geom addr" command when INVARIANTS is enabled. Don't
assert that the topology lock is held when g_valid_obj() is called from
debugger.

MFC after:	1 week
2010-04-19 20:07:35 +00:00
Pawel Jakub Dawidek
31c4cef715 Use lower priority for GELI worker threads. This improves system
responsiveness under heavy GELI load.

MFC after:	3 days
2010-04-15 16:34:06 +00:00
Andriy Gapon
2a842317eb g_io_check: respond to zero pp->mediasize with ENXIO
Previsouly this condition was reported with EIO by bio_offset > mediasize
check.
Perhaps that check should be extended to bio_offset+bio_length > mediasize.

MFC after:	1 week
2010-04-15 08:39:56 +00:00
Luigi Rizzo
83f8218814 fix copyright format, as requested by Joel Dahl 2010-04-13 09:56:17 +00:00
Luigi Rizzo
c36cf6fbbc make code compile with KTR 2010-04-13 09:53:08 +00:00
Luigi Rizzo
1831a90ac5 Bring in geom_sched, support for scheduling disk I/O requests
in a device independent manner. Also include an example anticipatory
scheduler, gsched_rr, which gives very nice performance improvements
in presence of competing random access patterns.

This is joint work with Fabio Checconi, developed last year
and presented at BSDCan 2009. You can find details in the
README file or at

http://info.iet.unipi.it/~luigi/geom_sched/
2010-04-12 16:37:45 +00:00
Andriy Gapon
8f128ff559 g_vfs_open: allow only one mount per device vnode
In other words, deny multiple read-only mounts of the same device.
Shared read-only mounts should theoretically be possible, but,
unfortunately, can not be implemented correctly using current
buffer cache code/interface and results in an eventual system crash.
Also, using nullfs seems to be a more efficient way to achieve the same
goal.

This gets us back to where we were before GEOM and where other BSDs are.

Submitted by:	pjd (idea for checking for shared mounting)
Discussed with:	phk, pjd
Silence from:	fs@, geom@
MFC after:	2 weeks
2010-04-03 08:53:53 +00:00
Andriy Gapon
1b4bc5f851 bo_bsize: revert r205860 and take an alternative approch in getblk
In r205860 I missed the fact that there is code that strongly assumes
that devvp bo_bsize is equal to underlying provider's sectorsize.
In those places it is hard to obtain the sectorsize in an alternative
way if devvp bo_bsize is set to something else.
So, I am reverting bo_bsize assigment in g_vfs_open.
Instead, in getblk I use DEV_BSIZE block size for b_offset calculation
if vp is a disk vp as reported by vn_isdisk.  This should coinside with
vp being a devvp.

Reported by:	Mykola Dzham <i@levsha.me>
Tested by:	Mykola Dzham <i@levsha.me>
Pointyhat to:	avg
MFC after:	2 weeks
X-ToDo:		convert bread(devvp) in all fs to use bo_bsize-d blocks
2010-04-02 15:12:31 +00:00
Andriy Gapon
0c04f06072 g_vfs_open: correctly set devvp.v_bufobj.bo_bsize to DEV_BSIZE
Because of how breadn -> bufstrategy -> g_vfs_strategy are currently
implemented, bread on devvp always expects DEV_BSIZE block size.
Thus, devvp bo_bsize must always be DEV_BSIZE irrespective of media
properties or filesystem implementation details.

Reviewed by:	mckusick
MFC after:	2 weeks
2010-03-29 20:34:25 +00:00
Matt Jacob
2b4969ff9e Change how multipath labels are created and managed. This makes it easier
to support various storage boxes which really aren't active-active.

We only write the label on the *first* provider. For all other providers
we just "add" the disk. This also allows for an "add" verb.

A usage implication is that you should specificy the currently active
storage path as the first provider.

Note that this does not add RDAC-like functionality, but better allows for
autovolumefailover configurations (additional checkins elsewhere will support
this).

Sponsored by:	Panasas
MFC after:	1 month
2010-03-29 18:04:06 +00:00
Alexander Motin
a5be8eb530 Do not fetch precise time of request start when stats collection disabled.
Reviewed by:	pjd, phk
2010-03-24 18:04:25 +00:00
Matt Jacob
b5dce617d8 Add 'rotate' and 'getactive' verbs to provide some control and information
about what the currently active path is.

Sponsored by:	Panasas
MFC after:	1 month
2010-03-21 15:02:47 +00:00
Jaakko Heinonen
a41aa4a789 Escape characters unsafe for XML output in GEOM class, instance and
provider names.

- Characters in range 0x01-0x1f except '\t', '\n', and '\r' are replaced
  with '?'. Those characters are disallowed in XML.
- '&', '<', '>', '\'', '"' and characters in range 0x7f-0xff are
  replaced with XML numeric character reference.

If the kern.geom.confxml sysctl provides invalid XML, libgeom
geom_xml2tree() fails and utilities using it do not work. Unsafe
characters are common in msdosfs and cd9660 labels.

PR:		kern/104389
Submitted by:	Doug Steinwand (original version)
Reviewed by:	pjd
Discussed on:	freebsd-geom
MFC after:	3 weeks
2010-03-20 16:16:13 +00:00
Pawel Jakub Dawidek
b0990a1dae Simplify loops. 2010-03-18 13:11:43 +00:00
Ulf Lilleengen
77d2a01ea8 - Set missing flag when initiating a plex rebuild with the rebuildparity
command.
- Check if plex is already syncing or rebuilding before initiating a parity
  rebuild or check.
2010-03-08 21:16:28 +00:00
Pawel Jakub Dawidek
32115b105a Please welcome HAST - Highly Avalable Storage.
HAST allows to transparently store data on two physically separated machines
connected over the TCP/IP network. HAST works in Primary-Secondary
(Master-Backup, Master-Slave) configuration, which means that only one of the
cluster nodes can be active at any given time. Only Primary node is able to
handle I/O requests to HAST-managed devices. Currently HAST is limited to two
cluster nodes in total.

HAST operates on block level - it provides disk-like devices in /dev/hast/
directory for use by file systems and/or applications. Working on block level
makes it transparent for file systems and applications. There in no difference
between using HAST-provided device and raw disk, partition, etc. All of them
are just regular GEOM providers in FreeBSD.

For more information please consult hastd(8), hastctl(8) and hast.conf(5)
manual pages, as well as http://wiki.FreeBSD.org/HAST.

Sponsored by:	FreeBSD Foundation
Sponsored by:	OMCnet Internet Service GmbH
Sponsored by:	TransIP BV
2010-02-18 23:16:19 +00:00
Pawel Jakub Dawidek
12f35a615a - Style fixes.
- Prefer strlcpy() over strncpy().
2010-02-18 22:29:35 +00:00
Pawel Jakub Dawidek
f24bf7522d Correct comment. 2010-02-18 22:28:12 +00:00
Pawel Jakub Dawidek
e5131ab452 Log attach just like we log detach. 2010-02-18 22:27:38 +00:00
Oleksandr Tymoshenko
45a7687f90 - Give geom_redboot taste of flash/spi. Now there is another provider
of redboot partitions. This patch was missed during merge from
    projects/mips.
2010-02-03 01:12:19 +00:00
Xin LI
38907b4cc7 Prevent NULL deference by checking return value of
gctl_get_asciiparam.

MFC after:	2 weeks
2010-02-02 22:25:22 +00:00
Marcel Moolenaar
cd18ad8347 Export the UUID of the partition in the XML. The partition UUID is used
by EFI's device path to identify a partition. In order for FreeBSD to
add EFI boot options, proper device paths need to be constructed.
2010-01-30 23:13:19 +00:00
Ivan Voras
49e232f2c9 Go through with write_metadata() non-error-handling and make it return "void".
This is mostly to avoid dead variable assignment warning by LLVM.
No functional change.

Pointed out by:	trasz
Approved by:	gnn (mentor)
2010-01-25 20:51:40 +00:00
Edward Tomasz Napierala
fdf64c5752 Remove unneeded variables.
Found with:	clang
2010-01-25 17:00:21 +00:00
Edward Tomasz Napierala
1373012510 Remove pointless assignment.
Found with:	clang
2010-01-25 16:58:58 +00:00
Edward Tomasz Napierala
dc9098605e Remove some pointless variable assignments.
Found with:	clang
2010-01-25 16:55:30 +00:00
Edward Tomasz Napierala
0a36cb97a8 Remove unused variable.
Found with:	clang
2010-01-25 16:10:22 +00:00
Xin LI
35daa28f30 Expose stripe offset and stripe size through libgeom and geom(8) userland
utilities.

Reviewed by:	pjd, mav (earlier version)
2010-01-17 06:20:30 +00:00
Edward Tomasz Napierala
b3f9d8c804 Add gmountver, disk mount verification GEOM class.
Note that due to e.g. write throttling ('wdrain'), it can stall all the disk
I/O instead of just the device it's configured for.  Using it for removable
media is therefore not a good idea.

Reviewed by:	pjd (earlier version)
2010-01-16 09:52:49 +00:00
Alexander Motin
0c8fd0c8ac Change the way in which zero stripesize is handled. Instead of reporting
zero stripeoffset in such case (as if device has no stripes), report offset
from the beginning of the media (as if device has single infinite stripe).

This gives partitioning tools information, required to guess better
partition alignment, in case if hardware doesn't report it's stripe size.
For example, it should give disklabel info about odd offset made by fdisk.
2010-01-06 13:14:37 +00:00
Alexander Motin
8de5811320 Move wakeup() out of mutex to reduce contention. 2010-01-05 10:52:21 +00:00
Alexander Motin
86de0ca52c Move wakeup() out of mutex to reduce contention. 2010-01-05 10:30:56 +00:00
Alexander Motin
06b215fd3a Slightly optimize XOR calculation. 2010-01-05 02:06:05 +00:00
Marcel Moolenaar
665bb830e2 Properly return the UUID represented by the alias.
PR:		142174
Submitted by:	Przemyslaw Laczynski <torindel@gmail.com>
Pointy hat to:	rpaulo
2010-01-02 01:02:59 +00:00
Alexander Motin
0d883b11e3 Call wakeup() only for the first request on the queue. 2009-12-30 17:23:27 +00:00
Antoine Brodin
13e403fdea (S)LIST_HEAD_INITIALIZER takes a (S)LIST_HEAD as an argument.
Fix some wrong usages.
Note: this does not affect generated binaries as this argument is not used.

PR:		137213
Submitted by:	Eygene Ryabinkin (initial version)
MFC after:	1 month
2009-12-28 22:56:30 +00:00
Alexander Motin
1c80ec0a6b Add BIO_DELETE support to ada(4):
- For SSDs use TRIM feature of DATA SET MANAGEMENT command, as defined by
ACS-2 specification working draft.
- For CompactFlash use CFA ERASE command, same as ad(4) does.

With this patch, `newfs -E /dev/ada1` was able to restore write speed of
my heavily weared OCZ Vertex SSD (firmware 1.4) up to the initial level
for the most part of it's capacity. Previous 1.3 firmware, even reportiong
TRIM capabilty bit set, was not working, reporting ABORT error for every
DSM command.

I have no idea whether it is normal, but for some reason it takes 200ms
to handle any TRIM command on this drive, that was making delete extremely
slow. But TRIM command is able to accept long list of LBAs and the length of
that list seems doesn't affect it's execution time. Implemented request
clusting algorithm allowed me to rise delete rate up to reasonable numbers,
when many parallel DELETE requests running.
2009-12-28 20:08:01 +00:00
Alexander Motin
5f9b1143ac Make geom_concat to passthrough stripe parameters of the first component,
hoping that rest will fit.
2009-12-24 14:32:21 +00:00
Alexander Motin
113d8e5046 As soon as geom_raid3 reports it's own stripe as sector size, report largest
underlying provider's stripe, multiplied by number of data disks in array,
due to transformation done, as array stripe.
2009-12-24 13:38:02 +00:00
Alexander Motin
92f60381d9 As soon as mirror has no own stripes, report largest stripe of unrerlying
components, hoping others fit, if they are not equal.
2009-12-24 12:17:22 +00:00
Alexander Motin
8b30323843 Add two disk ioctls, giving user-level tools information about disk/array
stripe (optimal access block) size and offset.
2009-12-24 11:05:23 +00:00
Alexander Motin
f00919d2fc Make geom_stripe report it's stripe size to upper layers. 2009-12-24 10:43:44 +00:00
Alexander Motin
d4060fa67d Make graid3 fallback to malloc() when component request size is bigger
then maximal prepared UMA zone size. This fixes crash with MAXPHYS > 128K.
2009-12-21 23:31:03 +00:00