Commit Graph

164 Commits

Author SHA1 Message Date
Brooks Davis
2b32284f18 - Alwasy explicitly bring the interface up before configuring it.
- If an interface's ifconfig_<ifn> is set, but empty, don't set it to
   ifconfig_DEFAULT.  This way interfaces can be disabled even in the
   presence of ifconfig_DEFAULT.
 - When listing interfaces and network_interfaces=auto, place lo0 first
   if it's around.
2005-09-02 17:11:13 +00:00
Brooks Davis
815e43db38 Support ifconfig_<ifn> variables containing quoted variables with spaces
in them by wrapping the ifconfig command with eval "...".

For example, this allows:

ifconfig_iwi0="DHCP ssid 'foo bar baz'"
2005-08-26 04:06:17 +00:00
Brooks Davis
41f7ee42ae - Remove the removable_interfaces variable. /etc/pccard_ether will
now run on any interface.
- Add a new ifconfig_<ifn> keyword, NOAUTO which prevents configuration
  of an interface at boot or via /etc/pccard_ether.  This allows
  /etc/rc.d/netif to be used to start and stop an interface on a purely
  manual basis.  The decision to affect pccard_ether may be revisited at
  a later date.

Requested by:	imp, gallatin (removable_interfaces)
Discussed with:	sam, Randy Bush (NOAUTO)
2005-08-24 01:23:49 +00:00
Brooks Davis
7657f59596 - Remove the pccard_ifconfig variable in favor of a new
ifconfig_DEFAULT variable.  Unlike pccard_ifconfig, ifconfig_DEFAULT
   applies to all interfaces that do not specify an ifconfig_<ifn>
   variable rather than just those listed in removable_interfaces.
 - Correct the list of interfaces when network_interfaces and
   removable_interfaces are both set by including removable_interfaces
   in the list of canidates.
 - When listing dhcp interfaces, include those with other ifconfig
   options so nat works.

Approved by:	re (network interface startup blanket)
2005-06-30 05:02:34 +00:00
Brooks Davis
a7e55c1e77 Add support for starting wpa_supplicant by adding the WPA keyword to an
interface's ifconfig_<ifn> entry in /etc/rc.conf.

Approved by:	re (network interface startup blanket)
2005-06-30 04:52:47 +00:00
Brooks Davis
cbac4adce6 Fix return values of ifconfig_up/down.
Reported by:	Andrea Campi
2005-06-07 23:59:45 +00:00
Brooks Davis
8e9e71f817 Support code for the OpenBSD dhclient. This significantly changes the
way interfaces are configured.  Some key points:

  - At startup, all interfaces are configured through /etc/rc.d/netif.
  - ifconfig_<if> variables my now mix real ifconfig commands the with
    DHCP and WPA directives.  For example, this allows media
    configuration prior to running dhclient.
  - /etc/rc.d/dhclient is not run at startup except by netif to start
    dhclient on specific interfaces.
  - /etc/pccard_ether calls "/etc/rc.d/netif start <if>" to do most of
    it's work.
  - /etc/pccard_ether no longer takes additional arguments to pass to
    ifconfig.  Instead, ifconfig_<if> variables are now honored in favor
    of pccard_ifconfig when available.
  - /etc/pccard_ether will only run on interfaces specified in
    removable_interfaces, even if pccard_ifconfig is set.
2005-06-07 04:49:12 +00:00
Pawel Jakub Dawidek
bb28d112bb 'all' argument for list_net_interfaces() is now unused, remove it. 2004-12-05 21:45:36 +00:00
Ralf S. Engelschall
18c3f40e94 Use "ifconfig -l" instead of "list_network_interfaces all" in
ifnet_rename() to support situations where rc.conf's $network_interfaces
variable is set to an explicit list of network interfaces (instead of
the default "auto").

Using "list_network_interfaces all" resulted in using
$network_interfaces for both interface _renaming_ and interface
_configuration_ which obviously cannot work either before (if the
new name is in $network_interfaces) or after (if the old name is in
$network_interfaces) renaming the interface.
2004-12-05 09:51:48 +00:00
Ralf S. Engelschall
9edbeba781 fix typo: s/intefraces/interfaces/ 2004-12-05 09:01:20 +00:00
Pawel Jakub Dawidek
1f8197cf4d Allow to change interfaces name on boot time.
Now, one should be able to put something like this into /etc/rc.conf:

	ifconfig_fxp0_name="net0"
	ifconfig_net0="inet 10.0.0.1/16"

Reviewed by:	green
2004-10-30 13:44:06 +00:00
Yaroslav Tykhiy
cd9d7d4d0c Avoid double appearing of cloned interfaces in the output
from list_net_interfaces() when network_interfaces=auto.

Rationale: Since the auto case is special, the lesser evil
had to be chosen among not adding cloned interfaces to
_tmplist or removing duplicates from _tmplist after adding
cloned interfaces.  Since list_net_interfaces() must not use
/usr/bin tools, the former "evil" appeared clearer and much
more efficient.  (See the PR audit trail for discussion.)

PR:		conf/63700
Reviewed by:	brooks
MFC after:	5 days
2004-08-28 07:58:02 +00:00
Yaroslav Tykhiy
044d85099a Fix a typo in a variable name. 2004-08-27 12:11:47 +00:00
Jens Schweikhardt
d8beb0fd3b Removed whitespace at BOF, EOL & EOF. 2004-06-06 11:46:29 +00:00
Martin Blapp
d10526a03b Improve the handling dhcp handling of pccard_ether.
There are now many configurations which have a NIC on board, and
pccard slots. If a dhclient is running on the internal nic, the
Improve the handling dhcp handling of pccard_ether.

Improve the dhcp handling of pccard_ether.

There are now many configurations which have a NIC on board and
Improve the dhcp handling of pccard_ether.

There are now many configurations which have a NIC on board and
cardbus slots too. If a dhclient was already running on the internal
NIC, the user was forced to kill a running dhclient manually.

If now a pccard is included at startup time, /etc/rc.d/dhclient
start does include it into the startup list for dhcp devices.
That means you can now do dhcp on the internal and the pccard devices
at the same time. If the card is plugged in later, a running dhclient
(working for the internal interface only) is killed, and restarted,
but the interface name of the new pccard is added to the internal
name. After removal, /etc/rc.d/dhclient is started again. This
script does nothing if there are no devices in /etc/rc.conf

This is only a workaround for a well known problem. After we have
a dhcp client which handles device adding and removal, it will go
away.
2003-08-11 20:32:00 +00:00
Hajimu UMEMOTO
c8d9e00aca add rtsol_flags.
MFC after:	1 week
2003-08-08 17:43:58 +00:00
Jun Kuriyama
7e025e0506 Check by [ $? -eq 0 ] rather than $?.
Reviewed by:	mtm
2003-06-24 03:55:21 +00:00
Mike Makonnen
b981655c08 o Fix a typo
o Fill in the ipx_down() routine.

Submitted by: ceri
2003-06-09 17:34:31 +00:00
Mike Makonnen
991ce918f2 - Remove a debugging echo.
- When we change the IFS make sure to return it to its previous
  value before executing a command.
2003-06-08 11:49:30 +00:00
Mike Makonnen
8ee6ed40d1 Implement *_down network routines for ifconfig'ed interfaces, cloned
interfaces, interface aliases, user supplied ifconfig scripts, and
ipx interfaces. The ipx routine fails unconditionaly at the moment.
Someone who has a need for it can fill it in with the appropriate incantations.
2003-06-08 10:34:40 +00:00
Hajimu UMEMOTO
bcd1e80f87 pccard_ether didn't setup IPv6 after rcTOS sweep.
Reviewed by:	mtm and dougb
Approved by:	re (scott)
2003-05-12 11:36:50 +00:00
Mike Makonnen
8b3695ab45 Break out and rewrite the network setup scripts.
o /etc/network.subr contains common subroutines used for seting
	  up network interfaces
	o rc.d/hostname sets the hostname if not already set
	o rc.d/nisdomain sets the nis domain *after* rpcbind but
	  before the yp* daemons. This fixes issues with temporary
	  hangs when looking up informaion in nis before it's ready.
	o rc.d/netif brings network interfaces (minus dhcp)  up.
	o rc.d/network1 has been disabled and will be retired before
	  RELENG_5. It will be replaced by rc.d/netif

Approved by:	markm (mentor)
2003-04-18 17:51:54 +00:00
Warner Losh
c42073b2d4 Back out 1.143 and 1.144. They are no longer needed now that we start
devd later in the boot process.  This should fix all the problems
people have had with those commits.  Diskless should be working again,
and those that mount /usr with nfs should be able to do that again too.
2003-02-12 04:26:10 +00:00
Warner Losh
96ac3c4b16 o Don't consider LOOPBACK devices as configured... 2002-12-13 23:36:31 +00:00
Warner Losh
c9e1bbfb91 o redirect the grep to /dev/null
o use ifn rather than interface in rc.network
o merge into rc.d/network1

Approved by: (re blanket)
2002-12-12 09:31:10 +00:00
Jens Schweikhardt
143085107b Fix style bugs:
* Space -> tabs conversion.
* Removed blanks before semicolon in "if ... ; then".
* Proper indentation of misindented lines.
* Put a full stop after some comments.
* Removed whitespace at end of line.

Approved by:	silence from gordon
2002-10-12 10:31:31 +00:00
Hajimu UMEMOTO
a75d520e1f up gif during setup. 2002-09-20 18:31:55 +00:00
Gordon Tetlow
e4bc448975 Correct comment
Submitted by:	Mike Makonnen <makonnen@pacbell.net>
2002-08-09 17:33:07 +00:00
Dima Dorfman
dacf6a1e22 Remove spurious "echo '.'". 2002-07-18 05:00:23 +00:00
Doug Barton
de66529e70 Make nisdomainname=NO DTRT
Submitted by:   des, via Mike Makonnen <makonnen@pacbell.net>
2002-07-18 05:00:20 +00:00
Doug Barton
4264c30c0d Cleanup some pollution from the NetBSD sync, and add gif setup.
Submitted by:   Mike Makonnen <makonnen@pacbell.net>
2002-07-18 05:00:19 +00:00
Gordon Tetlow
8abdee58c7 Fix a typo that caused dhclient not to work.
Submitted by:   Dennis Kristensen <snicki@snicki.dk>
Reviewed by:    Mike Makonnen <makonnen@pacbell.net>
2002-07-18 05:00:18 +00:00
Gordon Tetlow
242bd45fb4 Merge in all the changes that Mike Makonnen has been maintaining for a
while. This is only the script pieces, the glue for the build comes next.

Submitted by:   Mike Makonnen <makonnen@pacbell.net>
Reviewed by:    silence on -current and -hackers
Prodded by:     rwatson
2002-07-18 05:00:17 +00:00
Dag-Erling Smørgrav
cec161f9e1 Cosmetic changes to the previous commit, bringing it closer to what I
already had in my tree but didn't want to commit.
2002-04-11 22:06:27 +00:00
Peter Wemm
6636027fe4 Since sshd expects /etc/ssh/ssh_host_rsa_key to exist, we had better
create it.  Also specify protocol v1/v2 in case people wonder why we
generate two RSA keys.
2002-04-10 22:30:54 +00:00
Doug Barton
41cf829909 The good news is that my initial PR was correct... the bad news is that I
was apparently smoking something when I committed the last fix, because as
ume was kindly enough to set me straight on, amd *will* start with no
arguments at all, as long as there is an /etc/amd.conf file for it to
read. What it won't do is start with *just* -p.

In any case, now it's fixed.
2002-04-01 18:33:45 +00:00
Dag-Erling Smørgrav
dde1888c4a Don't try to generate ssh keys if ssh isn't installed. 2002-03-19 03:45:02 +00:00
Crist J. Clark
5b7e37d2b7 IPFilter may need to be re-sync'ed even if we are not filtering, but
only doing ipnat(8). Go back to using $ipfilter_active, but turn off
$ipfilter_active when loading ipl.ko has failed.

Submitted by:	devet@devet.org (Arjan de Vet)
MFC after:	3 days
2002-03-19 01:56:04 +00:00
Doug Barton
4072b4a6a1 Answer the question posed in 1.126. amd won't start without either a
conf file, or command line options. I brought this up in PR 12432,
which (ironically) obrien assigned to me after I became a committer. :)

PR:		conf/12432
Submitted by:	Me
2002-03-17 07:35:51 +00:00
Crist J. Clark
7a82d7421f The reload of ipf(8) rules should depend on $ipfilter_enable, not
$ipfilter_active. $ipfilter_enable is set to "NO" if modules fail to
load, and $ipfilter_active can be "YES" when we are not using ipf(8).

MFC after:	3 days
2002-03-12 20:25:25 +00:00
David E. O'Brien
3cbb824a64 Background the startup of `Amd', it often blocks on startup. 2002-03-12 01:04:35 +00:00
David E. O'Brien
ec6a10cd53 Why shouldn't amd always write its PID to a file?
Since I cannot answer that question, make it.
2002-03-12 01:01:53 +00:00
Dima Dorfman
1998c28f48 Redirect stdout of `ipf -y' to /dev/null. This removes a stray
"filter sync'd" in the middle of the boot output if IPFilter is
enabled, but does not hide any potential errors, which go to stderr.
2002-03-04 10:30:24 +00:00
Crist J. Clark
29c0f078e2 There is no reason to demand the administrator set 'natd_interface'
when running natd(8) out of the rc-files. It is perfectly valid for
the interface or alias address to be set in a natd(8) configuration
file, not on the command line. Also, loosen up the restrictions on
identifying an IP address argument in 'natd_interface.'

Fix the documentation, rc.conf(5), to reflect this change.

Take the bogus default for 'natd_interface' out of /etc/defaults/rc.conf.

MFC after:	3 days
2002-02-20 10:31:01 +00:00
Crist J. Clark
36a48df48e peter points out that we probably should not mess with the sysctl(8)
values at all if they are not purposefully set. What if the
administrator messed with them in /etc/sysctl.conf? We don't want to
overwrite them.

If 'log_in_vain' is zero, do not force the issue. If it is non-zero,
set it.
2002-02-08 13:25:33 +00:00
Sheldon Hearn
3e38757beb Register amd's dependency on NFS.
This change was submitted to the freebsd-audit mailing list for review
but received no feedback.  Hindsight-enabled reviews are welcome.

PR:		conf/31358
Submitted:	Thomas Quinot <thomas@cuivre.fr.eu.org>
2002-01-28 11:05:01 +00:00
Crist J. Clark
f44609fe71 Make the rc.conf(5) 'log_in_vain' knob an integer.
Try this out in -CURRENT, MFC, and then consider dropping the
'log_in_vain' knob all together. It really is something for
sysctl.conf(5).

PR:		bin/32953
Reviewed by:	-bugs discussion
MFC after:	1 week
2002-01-26 09:05:13 +00:00
Alfred Perlstein
bcb733d069 rpc.lockd needs rpc.statd to be running for it to start up properly.
so swap the order.

Also allow rpc.lockd and rpc.statd to be turned on if nfsclient is
enabled.  They are needed to provide client side locking support.

PR: conf/27811
2001-12-13 04:21:18 +00:00
Ruslan Ermilov
d4d2e898a1 s/sysctl -w/sysctl/ 2001-12-11 08:21:46 +00:00
Robert Watson
67b86547da o Update rc.network to reflect the recent change of default in the
kernel TCP timer code: rather than checking for tcp_keepalive being
  set to "YES", check for "NO" and turn off keepalives if the variable
  is set in that manner.

o Note: eventually, it would make sense to remove this variable from
  rc.conf management, and instead rely on sysctl.conf.  In fact, this
  is probably true of a number of rc.conf variables whose sole aim
  is to drive the setting of sysctls at boot time.
2001-12-07 17:03:14 +00:00