Commit Graph

48 Commits

Author SHA1 Message Date
Warner Losh
38d8c9940b Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 06:42:59 +00:00
Warner Losh
fa4b32fa80 All current uses of pci_set_powerstate are bogus, at least in theory.
However, they are presently necessary due to bigger bogusness in the
pci bus layer not doing the right thing on suspend/resume or on
initial device probe.  This is exactly the sort of thing that the
BURN_BRIDGES option was invented for.  Mark all of them as
BURN_BRIDGES.  As soon as I have the powerstate stuff properly
integrated into the pci bus code, I intend to remove all these
workarounds.
2003-07-03 14:00:57 +00:00
Matthew N. Dodd
533294b956 - Don't call pci_enable_io() in drivers (unless needed for resume).
- Don't test memory/port status and emit an error message; the PCI
  bus code will do this now.
2003-04-16 03:16:57 +00:00
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
David E. O'Brien
8368cf8f75 Use __FBSDID rather than rcsid[]. 2003-04-03 21:36:33 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Martin Blapp
e808cf6260 When reading PHY regs over the i2c bus, the turnaround ACK bit
is read one clock edge too late. This bit is driven low by
slave (as any other input data bits from slave) when the clock
is LOW. The current code did read the bit after the clock was
driven high again.

Reviewed by:	luoqi
MFC after:	2 weeks
2003-01-10 08:09:58 +00:00
Jens Schweikhardt
d64ada501a Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/
Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Alfred Perlstein
29f194457c Fix instances of macros with improperly parenthasized arguments.
Verified by: md5
2002-11-09 12:55:07 +00:00
Hidetoshi Shimokawa
196c0df6ca Add support for DEVICE_POLLING.
PR: kern/44772
Submitted by: Takashi Oono <takashi@yha.att.ne.jp>
MFC after: 1 week
2002-11-06 15:50:32 +00:00
Doug Ambrisko
1f5488043d Add support for SX cards using TBI such as Netgear GA621.
Sponsored by:	Vernier Networks.
MFC after:	1 week
2002-08-08 18:33:28 +00:00
Alfred Perlstein
eaabec5530 Cleanup after my de-__P (remove leading whitespace before prototype args).
Add newlines after function return types in function declarations.

Approved by: wpaul (a long time ago)
2002-07-06 15:59:57 +00:00
Alfred Perlstein
914596ab53 catch up with ext_free prototype change. 2002-06-29 01:36:59 +00:00
Poul-Henning Kamp
d9fc2b816e Do not call nge_tick() if we get an PHY interrupt, nge_tick() calls
mii_tick() which should only be called once per second.

Our current MII/PHY state-engine is not able to deal with PHY
interrupts as far as I can tell, and most net drivers don't seem
to use the link/status change call-back mechanism.  It seems that
MII/PHY was orphaned before it grew up.
2002-05-04 11:15:33 +00:00
Poul-Henning Kamp
279fe8d156 Make one generic mii_phy_detach() to replace 19 slightly different ones.
Rename mii_phy_auto_stop() mii_phy_down().

Introduce mii_down(), use it from nge.  Do not indirect it to 19 identical
case's in 19 switchstatements like NetBSD did.
2002-04-29 13:07:38 +00:00
Poul-Henning Kamp
78c8c3db4b Move a lot closer to NetBSDs MII support for GigE.
Move fxp and nge drivers over to use the new stuff.
2002-04-29 11:57:30 +00:00
Poul-Henning Kamp
b418ad5c2e Follow NetBSD and s/IFM_1000_TX/IFM_1000_T/ 2002-04-28 20:34:20 +00:00
Poul-Henning Kamp
ff7ed9f76b If the receiver runs out of space for an received frame in the internal
FIFO or the in-RAM descriptors it will switch to RX_IDLE from where it
is not restarted.

We used to deal with RX_IDLE by doing a total reinit but this lost
our link and caused a potential 30sec autonegotiation against
switches.  This was changed to a less heavyhanded approach, but this
failed to restart the receiver it it were in the RX_IDLE state.

This change adds the RX_IDLE and the RX_FIFO_OFLOW conditions as
triggers for interrupts and receive side processing, and restarts
the receiver when it is RX_IDLE.

Remove the #ifdef notyet'ed nge_rxeoc() function.

Sponsored by:	Cybercity Internet, Denmark.
MFC after:	7 days
2002-04-13 21:33:33 +00:00
John Baldwin
6008862bc2 Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on:	i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Julian Elischer
3ffc8ab1ac Remove errors in LINT (now that they are fatal) 2002-02-27 02:21:43 +00:00
Brooks Davis
437e48e931 Don't pass an interface pointer to VLAN_INPUT{,_TAG}. Get it from the
mbuf instead.

Suggested by:	fenner
2001-12-03 17:28:27 +00:00
Jonathan Lemon
b256187110 Do not call mii_polltick() immediately after mii_tick().
Poiinted out by: wpaul
2001-09-29 19:31:29 +00:00
Bill Paul
8ce3678a09 Handle the RX FIFO overflow condition with the rxeof handler instead
of the rxeoc handler for now. The rxeoc handler will reset the link,
and the NatSemi chip's RX FIFO will overflow on a 32-bit bus once you
start hitting it with 500Mbps or more of traffic.

Also increase the size of the RX ring to 128 descriptors (was 64).
2001-09-19 21:39:26 +00:00
Jonathan Lemon
84e4de28cc Have the driver to announce what capabilitis it supports. 2001-09-18 18:53:41 +00:00
Brooks Davis
9d4fe4b2b0 Make vlan(4) loadable, unloadable, and clonable. As a side effect,
interfaces must now always enable VLAN support.

Reviewed by:	jlemon
MFC after:	3 weeks
2001-09-05 21:10:28 +00:00
Brooks Davis
bbce7eba7f IFT_8021_VLAN -> IFT_L2VLAN per if_vlan_var.h rev 1.9. With this change
LINT compiles, but doesn't link.
2001-07-25 00:19:59 +00:00
Bill Paul
248fa967ca Change the interrupt handler a bit so that we call the nge_rxeof() handler
when we get an RX_ERR interrupt rather than the nge_rxeoc() handler. The
rxeoc (end of channel) handler attempts to reinitialize the whole NIC,
which we don't want to do if we only received a bad packet.
2001-07-16 16:35:09 +00:00
Bill Paul
962315f66f Two optimizations:
1) Bite the bullet, and allow unaligned accesses without buffer copies
   on the i386 platform. According to some tests run by Andrew Gallatin,
   the buffer copy performance hit is greater than the unaligned access
   performance hit (especially with jumbo frames). We still need to copy
   everywhere else.

2) Enable interrupt moderation with a 100us timeout.

Submitted by: Andrew Gallatin <no longer at duke.edu>
MFC after: 1 week
2001-07-10 23:07:15 +00:00
Bill Paul
75ff968cd5 Apply patch supplied by Jonathan Chen: use the correct arguments to
pci_enable_io(). We need to use SYS_RES_IOPORT/SYS_RES_MEMORY instead
of PCIM_CMD_PORTEN/PCIM_CMD_MEMEN.
2001-07-09 17:58:42 +00:00
Bill Paul
2ce0498bd7 Do not set the MODE_1000 bit unless we actually have a gigabit link.
Previously, I had the MODE_1000 bit in the global config register set
unconditionally, which was wrong: we have to turn it off if we have
a 10/100 link. This is now handled in the nge_miibus_statchg() routine.

Discovered by: Nathan Binkert <binkertn@eecs.umich.edu>

(Note: this commit is being done from JFK airport. :P )
2001-07-08 16:24:01 +00:00
Bosko Milekic
f5eece3fb9 Change m_devget()'s outdated and unused `offset' argument to actually mean
something: offset into the first mbuf of the target chain before copying
the source data over.

Make drivers using m_devget() with a first argument "data - ETHER_ALIGN"
to use the offset argument to pass ETHER_ALIGN in. The way it was previously
done is potentially dangerous if the source data was at the top of a page
and the offset caused the previous page to be copied (if the
previous page has not yet been appropriately mapped).

The old `offset' argument in m_devget() is not used anywhere (it's always
0) and dates back to ~1995 (and earlier?) when support for ethernet trailers
existed. With that support gone, it was merely collecting dust.

Tested on alpha by: jlemon
Partially submitted by: jlemon
Reviewed by: jlemon
MFC after: 3 weeks
2001-06-20 19:48:35 +00:00
Bill Paul
7437599f41 Fix some memory bugs with regard to jumbo buffers. I made a mistake when
converting from the old external mbuf buffer code to the new (with the
MEXTADD() macro). Also free free list memory correctly in
foo_free_jumbo_mem() routines: grab the head of the list, then
remove it, _then_ free() it.

This fixes the memory corruption problem I've been chasing in the level 1
driver.
2001-06-18 22:04:40 +00:00
Bill Paul
80782fbf93 Mind-o in last commit: s/==/>=/ when checking MTU size. *blush* 2001-06-16 04:02:37 +00:00
Bill Paul
cb2f755c7f Fix the last serious bug I've been chasing:
The DP83820/83821 has an undocumented limitation concerning jumbo frames
and TX checksum offload. In order for TX checksum offload to work, the
outgoing frame must fit entirely within the TX FIFO, which is 8192 bytes
in size. This isn't a problem, until you try to send a 9000-byte frame,
at which point the TX DMA engine goes to sleep. It turns out that if
you want to send a jumbo frame larger than 8170 bytes (8192 - 64), you
have to turn off the TX checksum support.

As a workaround, I changed nge_ioctl() so that if the user selects an
MTU larger than 8152 bytes, we clear the if_hwassist flags. The flags
will be set again once the MTU is reduced to a smaller value.
2001-06-16 03:38:44 +00:00
Bill Paul
c921560563 Turn TCP and UDP hardware RX checksumming back on. jlemon pointed out where
I'd gone wrong before: we have to set csum_data to 0xffff, not 0.
2001-06-15 19:02:55 +00:00
Bill Paul
1bacd83aea Fix TX bug: when using TCP/IP checksum offload on TX, we tell the chip
we want the checksums calculated on a per-packet basis using control bits
in the extsts field of the DMA descriptor structure. For TX, the chip
seems to want these bits set in the field of the first descriptor in
a fragment chain, not the last.
2001-06-15 18:43:19 +00:00
Bill Paul
23d3a203ad - Remember to set the 'extsts enable' bit in the CFG register to enable the
use of the extsts field in DMA descriptors. We need this to tell the chip
  to calculate TCP/IP checksums in hardware on a per-packet basis.

- Fix the unions in DMA descriptor structures. Breakage on alpha led
  me to realize I'd done it wrong the first time.
2001-06-06 22:16:23 +00:00
Bill Paul
765a54f4c9 Disable extra TCP/UCP checksum checking in nge_rxeof() for now. 2001-06-06 19:17:10 +00:00
Bill Paul
2195de46d3 Per jlemon: add code to nge_rxeof() to allow verification of TCP and
UDP checksums too, not just IP. The chip only tells us if the checksum
is ok, it does not give us a copy of the partial checksum for later
processing. We have to deal with this the right way, but we can deal
with it.
2001-05-29 22:14:03 +00:00
Bill Paul
01702579c4 Fix mind-o in nge_rxeof(): I used CSUM_IP_CHECKED twice instead of
CSUM_IP_CHECKED|CSUM_IP_VALID.
2001-05-29 21:44:45 +00:00
Bill Paul
065a7922df Fix instance of (struct ti_softc *) that should have been
(struct nge_softc *), which the compiler never complained about.
I guess it doesn't matter, a pointer is a pointer, but looked weird
to me.
2001-05-15 22:19:50 +00:00
Bill Paul
ddde4ea967 Adjust the descriptor structures a little by making the software parts
be unions with enough padding to make sure they always end up being
a multiple of 8 bytes in size, since the 83820/83821 chips require
descriptors to be aligned on 64-bit boundaries. I happened to get it
right for the 32-bit descriptor/x86 case, but botched everything else.
Things should work properle on 32-bit/64-bit platforms now.

Note that the 64-bit descriptor format isn't being used currently.
2001-05-15 21:42:43 +00:00
Bill Paul
5da751e46c Unbreak release. *sigh* 2001-05-12 19:51:40 +00:00
Bill Paul
e39cd3b251 It's vlan.h, not opt_vlan.h. 2001-05-11 20:55:31 +00:00
Bill Paul
ce4946daa5 Add support for gigabit ethernet cards based on the NatSemi DP83820
and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000
copper PHY. There are a whole bunch of very low cost cards available with
this chipset selling for $150USD or less. This includes the SMC9462TX,
D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards
from Addtron.

This chip supports TCP/IP checksum offload, VLAN tagging/insertion.
2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs.
I have not done serious performance testing with this driver. I know
it works, and I want it under CVS control so I can keep tabs on it.
Note that there's no serious mutex stuff in here yet either: I need
to talk more with jhb to figure out the right way to do this. That
said, I don't think there will be any problems.

This driver should also work on the alpha. It's not turned on in
GENERIC.
2001-05-11 19:56:39 +00:00