Commit Graph

145 Commits

Author SHA1 Message Date
Adrian Chadd
9844b3b3ab Allow the i2c node requirements to be slightly relaxed.
These realtek switch PHYs speak a variant of i2c with some slightly
modified handling.

From the submitter, slightly modified now that some further digging
has been done:

  The I2C framework makes a assumption that the read/not-write bit of the first
  byte (the address) indicates whether reads or writes are to follow.

  The RTL8366 family uses the bus: after sending the address+read/not-write byte,
  two register address bytes are sent, then the 16-bit register value is sent
  or received.  While the register write access can be performed as a 4-byte
  write, the read access requires the read bit to be set, but the first two bytes
  for the register address then need to be transmitted.

This patch maintains the i2c protocol behaviour but allows it to be relaxed
(for these kinds of switch PHYs, and whatever else Realtek may do with this
almost-but-not-quite i2c bus) - by setting the "strict" hint to 0.
The "strict" hint defaults to 1.

Submitted by:	Stefan Bethke <stb@lassitu.de>
2011-12-04 11:55:33 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Ed Schouten
d745c852be Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
Christian Brueffer
04c4548981 Revert r226398 and instead move the allocation of usrbufs after the error check.
Suggested by:	pjd
MFC after:	1 week
2011-10-16 17:38:20 +00:00
Christian Brueffer
0ad684e7b4 Properly free resources in an error case.
CID:		4203
Found with:	Coverity Prevent(tm)
MFC after:	1 week
2011-10-15 15:57:55 +00:00
Bjoern A. Zeeb
a34c6aeb85 Tag mbufs of all incoming frames or packets with the interface's FIB
setting (either default or if supported as set by SIOCSIFFIB, e.g.
from ifconfig).

Submitted by:	Alexander V. Chernikov (melifaro ipfw.ru)
Reviewed by:	julian
MFC after:	2 weeks
2011-07-03 16:08:38 +00:00
Kevin Lo
ee6eac62f7 Remove duplicate header includes 2011-06-28 08:36:48 +00:00
Andreas Tobler
d91c258074 - Improve error handling.
- Add retry loops in the i2c read/write functions.
- Combied the ADC channel selection and readout of the value into
  one iicbus_transfer to avoid possible races.

Reviewed by: nwhitehorn
2011-06-08 16:00:30 +00:00
Andreas Tobler
1b49664037 - Improve error handling.
- Add a retry loop for the i2c sensor reading.
- Check on busy status of the chip and on invalid values.
- Fix a typo in a comment.
- Replace the constant 2732 with the ZERO_C_TO_K macro.

Approved by:	nwhitehorn (mentor)
2011-06-04 09:23:54 +00:00
Andreas Tobler
7cced077f8 Replace the FCU_ZERO_C_TO_K with the ZERO_C_TO_K from powermac_thermal.h.
Approved by:	nwhitehorn (mentor)
2011-06-04 09:19:53 +00:00
Andreas Tobler
aa7e99afbd - Improve error handling.
- Add a retry loop for the i2c sensor reading.
- Update the sensor handling for sensors which do not have a location
entry. [1]

Submitted by: [1] Justin Hibbits.
Approved by:	nwhitehorn (mentor)
2011-06-03 18:58:32 +00:00
Nathan Whitehorn
6b9a12b391 Move the celsius-to-kelvin conversion to a place that powermac_thermal can
see it as well.
2011-05-29 19:53:46 +00:00
Nathan Whitehorn
815d7d92c1 Update the I2C-based temperature/fan drivers to connect to the Powermac
thermal control module. This provides automatic fan management on all G5
PowerMacs and Xserves.
2011-05-29 18:35:57 +00:00
Andreas Tobler
d188174a4f Add a new driver, the ad7417, to read temperatures and voltages on some
PowerMac's.

Approved by:	nwhitehorn (mentor)
2011-05-29 14:25:42 +00:00
Andreas Tobler
14be64618e There are PowerMacs which do not have a hwsensor-location property
for this sensor. Instead of leaving this location empty we use here
the default name 'sensor'.

Submitted by: Justin Hibbits <chmeeedalf at gmail dot com>
Approved by: nwhitehorn (mentor)
2011-01-18 21:47:30 +00:00
Andreas Tobler
b919d343a9 Remove unused variable. Spotted by a cppcheck
(devel/cppcheck, http://sourceforge.net/projects/cppcheck) run.

Approved by: nwhitehorn (mentor)
2011-01-15 19:16:56 +00:00
Andreas Tobler
7cea3d952b On the Xserve G5 we find the LM75 instead of the DS1775. The core
functionality is the same, a difference is that the DS1775 has a better
precision than the LM75. But we do not use it in our setup. Make the
LM75 work the same as the DS1775.

Fix a typo in device_set_desc.

Tested by: Paul Mather <paul at gromit dlib vt edu>

Approved by:	nwhitehorn (mentor)
2010-12-10 20:27:50 +00:00
Nathan Whitehorn
134a9563c7 Provide support for IIC_M_NOSTOP/IIC_M_NOSTART for bit-banging and
otherwise low-level controllers.

Reviewed by:	thompsa
2010-11-08 19:53:16 +00:00
Andreas Tobler
da89fa28c6 Add three new drivers for fan control and temperature reading on the
PowerMac7,2.

- The fcu driver lets us read and write the fan RPMs for all fans in the
  PowerMac7,2. This driver is PowerMac specific.
- The ds1775 is a driver to read the temperature for the drive bay sensor.
- The max6690 is another driver to read temperatures. Here it is used to
  read the inlet, the backside and the U3 heatsink temperature.

An additional driver, the ad7417, will follow later.

Thanks to nwhitehorn for guiding me through this driver development.

Approved by:	nwhitehorn (mentor)
2010-10-15 20:08:16 +00:00
Andriy Gapon
3d844eddb7 bus_add_child: change type of order parameter to u_int
This reflects actual type used to store and compare child device orders.
Change is mostly done via a Coccinelle (soon to be devel/coccinelle)
semantic patch.
Verified by LINT+modules kernel builds.

Followup to:	r212213
MFC after:	10 days
2010-09-10 11:19:03 +00:00
Joel Dahl
7f22a6d334 Fix typo in comment. 2010-08-07 08:31:32 +00:00
Nathan Whitehorn
517524ec87 Fix iicbus_get_addr() on 64-bit big-endian systems. The bus accessor
passes a uintptr_t, not a uint32_t.
2010-07-08 14:19:52 +00:00
Nathan Whitehorn
9f220e4d78 Revert changes accidentally committed as part of r209298. 2010-06-18 14:20:54 +00:00
Nathan Whitehorn
eaef5f0af8 Provide for multiple, cascaded PICs on PowerPC systems, and extend the
OFW interrupt map interface to also return the device's interrupt parent.

MFC after:	8.1-RELEASE
2010-06-18 14:06:27 +00:00
Nathan Whitehorn
fed318596c Add two new flags (IIC_M_NOSTOP and IIC_M_NOSTART) to struct iic_msg to
allow consumers of iicbus_transfer() to send messages with repeated starts.

Reviewed by:	imp
2010-06-05 17:48:26 +00:00
Maxim Sobolev
e50d35e6c6 Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after:	1 month
2010-05-03 07:32:50 +00:00
Stanislav Sedov
97958cafc8 - Rename ds1672 and ds133x devices to "ds1672_rtc" and "ds133x_rtc"
respectivly. This will allow one to have a kernel with both devices
  present and use it for multiple boards with different types of RTC
  sitting on a bus.

Discussed with:	imp
2009-04-21 22:48:12 +00:00
Stanislav Sedov
50aababbfb - Give a warning and start the oscillator if it was not previously
runned.
- Rename ds1672 -> rtc to follow the other drivers.
- Refactor/simplify the code a bit.

MFC after:	2 weeks
2009-04-20 15:47:06 +00:00
Kip Macy
279aa3d419 Change if_output to take a struct route as its fourth argument in order
to allow passing a cached struct llentry * down to L2

Reviewed by:	rwatson
2009-04-16 20:30:28 +00:00
Warner Losh
b23193a559 Fix iicbus_intr, iicbus_write and device_read_ivar prototypes... 2009-02-10 22:50:23 +00:00
Rafal Jaworowski
1aef11be0e Teach iic(4) the 'repeated start' I2C condition. This will be used by the
upcoming i2c(8) diag utility.

Reviewed by:	bms, stas
Obtained from:	Semihalf
2009-01-26 13:53:39 +00:00
Nathan Whitehorn
f5a78b2f7e Change the probe priority for PCI and I2C generic bus modules from
numerical constants to BUS_PROBE_GENERIC.

Suggested by:	jhb
2009-01-20 00:05:43 +00:00
Nathan Whitehorn
ee9db219df Revert revision 186833 and try a different strategy to allow this device to
work when the bus attaches its own children. Instead of hardcoding a unit
number and returning BUS_PROBE_NOWILDCARD, which will break multiple iicbus
systems, check in the probe routine whether the device address is 0. Real
I2C devices will never have this address, but devices added with
BUS_ADD_CHILD() will.

Requested by:	jhb
Reviewed by:	jhb
2009-01-15 23:14:59 +00:00
Nathan Whitehorn
3bb481ffb0 Import an Open Firmware I2C bus module. This attaches firmware device tree
indicated I2C devices, and provides an ofw_bus interface for driver probing.
This should be MI, but is currently provided only on PowerPC due to lack of
sparc64 hardware with an I2C controller.

Discussed on:	freebsd-arch
2009-01-15 02:46:43 +00:00
Nathan Whitehorn
789c4b9d08 Change the way I2C bus attachment works to allow firmware-assisted bus
subclasses as are available with PCI. Changes I2C device drivers without
real probe logic to return BUS_PROBE_NOWILDWARD to avoid interference with
firmware bus enumeration, and reduces the probe priority of the iicbus
base driver to allow subclass attachment at higher priority.

Discussed on:	freebsd-arch
2009-01-06 17:23:37 +00:00
Rafal Jaworowski
53917bdbd9 Streamline #include sections in ds133x and ds1672 drivers. This unbreaks the
LINT build.
2008-09-08 15:49:07 +00:00
Rafal Jaworowski
286fa44565 ds133x: Introduce device_identify method; update NOTES.
Obtained from:	Semihalf
2008-09-08 10:40:48 +00:00
Warner Losh
da02572e7f Handle errors from device_get_chidlren.
Free child list when there's more children than we expected.
2008-08-23 07:38:00 +00:00
Ed Schouten
94b9bedcb9 Fix compilation of arm's AVILA.
Compilation of the AVILA kernel failed because of two reasons:

- It needed curthread, which is defined through <sys/pcpu.h>.

- It still referred the softc's sc_mtx field, which has been replaced by
  sc_lock three weeks ago.

To solve the first problem, I decided to include <sys/pcpu.h> in
<sys/sx.h>, which also seems to be done by <sys/mutex.h> and
<sys/rwlock.h>. Those header files also require curthread.

Approved by:	jhb
2008-08-13 09:20:52 +00:00
Rafal Jaworowski
c85885020b Rework Dallas Semiconductor RTC support.
- Extend the DS1339 driver to recognize more chips in the family:
  DS1337, DS1338, DS1339 are now supported
- Provide run-time chip detection

Reviewed, tested by:	stas
Obtained from:		Piotr Ziecik kosmo ! semihalf dot com
2008-08-11 19:33:58 +00:00
Rafal Jaworowski
9884d99e9b Rename ds1339 -> ds133x to better fit the upcoming driver extensions. 2008-08-11 19:26:55 +00:00
Stanislav Sedov
4bdfea0f50 - Reflect the iicbus infrastructure changes.
Approved by:	raj
2008-08-05 08:38:33 +00:00
Stanislav Sedov
ea73ef7478 - Reflect changes in iic infrastructure. 2008-08-05 08:20:58 +00:00
John Baldwin
225f9723dc Lock the consumers of the iicbus(4) infrastructure:
- ad7418(4) uses an sx lock instead of a mtx since the iicbus(4) stuff it
  calls can sleep (request_bus()).  Also, I expanded the locking slightly
  to serialize writes to data stored in the softc.
- Similarly, the icee(4) driver now uses an sx lock instead of a mutex.
  I also removed the pointless OPENED flag and flags field from the softc.
- The locking for the ic(4) driver was a bit trickier:
  - Add a mutex to the softc to protect softc data.
  - The driver uses malloc'd buffers that are the size of the interface
    MTU to send and receive packets.  Previously, these were allocated
    every time the interface was brought up and anytime the MTU was
    changed, with various races that could result in memory leaks.  I
    changed this to be a bit simpler and more like other NIC drivers in
    that we allocate buffers during attach for the default MTU size and
    only reallocate them on MTU changes.  The reallocation procedure
    goes to some lengths with various flags to not replace either the
    the receive or transmit buffers while the driver is busy receiving
    or transmitting a packet.
  - Store the device_t of the driver in the softc instead of detours into
    new-bus using if_dunit from the ifnet and an even more bizarre detour
    to get the softc instead of using if_softc.
  - Drop the driver mutex when invoking netisr_dispatch() to pass the
    packet up to IP.
  - Use if_printf().
2008-08-04 21:14:24 +00:00
John Baldwin
313f8941e1 Add locking to the core iicbus(4) drivers:
- Add an sx lock to the iic(4) driver to serialize open(), close(), read(),
  and write and to protect sc_addr and sc_count in the softc.
- Use cdev->si_drv1 instead of using the minor number of the cdev to
  lookup the softc via newbus in iic(4).
- Store the device_t in the softc to avoid a similar detour via minor
  numbers in iic(4).
- Only add at most one instance of iic(4) and iicsmb(4) to each iicbus(4)
  instance, and do it in the child driver.
- Add a mutex to the iicbus(4) softc to synchronize the request/release bus
  stuff.
- Use __BUS_ACCESSOR() for IICBUS_ACCESSOR() instead of rolling our own.
- Add a mutex to the iicsmb(4) softc to protect softc state updated in the
  interrupt handler.
- Remove Giant from all the smbus methods in iicsmb(4) now that all the
  iicbus(4) backend is locked.
2008-08-04 21:03:06 +00:00
John Baldwin
13e3657b7b Add locking to the various iicbus(4) bridge drivers:
- Just grab Giant in the ixp425_iic(4) driver since this driver uses
  a shared address/data register window pair to access the actual
  I2C registers.  None of the other ixp425 drivers lock access to these
  shared address/data registers yet and that would need to be done before
  this could use any meaningful locking.
- Add locking to the interrupt handler and 'iicbus_reset' methods of the
  at91_twi(4) driver.
- Add locking to the pcf(4) driver.  Other pcf(4) fixes include:
  - Don't needlessly zero the softc.
  - Use bus_foo rather than bus_space_foo and remove bus space tag and
    handle from softc.
- The lpbb(4) driver just grabs Giant for now.  This will be refined later
  when ppbus(4) is locked.
- As was done with smbus earlier, move the DRIVER_MODULE() lines to match
  the bus driver (either iicbus or iicbb) to the bridge driver into the
  bridge drivers.

Tested by:	sam (arm/ixp425)
2008-08-04 20:46:15 +00:00
Stanislav Sedov
8e3b2aab49 - Add driver for Dallas Semiconductor DS1339 RTC sitting
on I2C bus.

Reviewed by:	raj
Approved by:	imp
MFC after:	2 week
2008-07-25 19:34:44 +00:00
John Baldwin
0df8f0815a Explicitly lock Giant in smbus_if methods in the bktr_i2c and iicsmb
drivers for now.  This can be replaced with driver locks when these
drivers are locked.
2008-06-06 18:40:38 +00:00
Warner Losh
1a13e01f7f Don't use spinlocks here. The iicbus transactions can take a long
time, and this prevents interrupts (say for Hz/hardclock) from
happening.  Time stands still during the transfers...
2007-04-17 05:48:35 +00:00
Warner Losh
66c7612a8d New device: icee. Generic i2c eeprom driver. 2007-03-23 23:10:35 +00:00