of it being explicitly passed as an argument. No functional changes.
The big picture here is that I want to get rid of the 'td' argument
being passed everywhere, and this is the first piece that affects
the NFS server.
Reviewed by: rmacklem
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19417
This will enable callers to take const paths as part of syscall
decleration improvements.
Where doing so is easy and non-distruptive carry the const through
implementations. In UFS the value is passed to an interface that must
take non-const values. In ZFS, const poisoning would touch code shared
with upstream and it's not worth adding diffs.
Bump __FreeBSD_version for external API consumers.
Reviewed by: kib (prior version)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17805
I believe that a ReclaimComplete with rca_one_fs == TRUE is only
to be used after a file system has been transferred to a different
file server. However, RFC5661 is somewhat vague w.r.t. this and
the ESXi 6.7 client does both a ReclaimComplete with rca_one_fs == TRUE
and one with ReclaimComplete with rca_one_fs == FALSE.
Therefore, just ignore the rca_one_fs == TRUE operation and return
NFS_OK without doing anything instead of replying NFS4ERR_NOTSUPP.
This allows the ESXi 6.7 NFSv4.1 client to do a mount.
After discussion on the NFSv4 IETF working group mailing list, doing this
along with setting a flag to note that a ReclaimComplete with rca_one_fs TRUE
was an appropriate way to handle this.
The flag that indicates that a ReclaimComplete with rca_one_fs == TRUE was
done may be used to disable replies of NFS4ERR_GRACE for non-reclaim
state operations in a future commit.
This patch along with r332790, r334492 and r336357 allow ESXi 6.7 NFSv4.1 mounts
work ok. ESX 6.5 NFSv4.1 mounts do not work well, due to what I believe are
violations of RFC-5661 and should not be used.
Reported by: andreas.nagy@frequentis.com
Tested by: andreas.nagy@frequentis.com, daniel@ftml.net (earlier version)
MFC after: 2 weeks
Relnotes: yes
When a NFSv4.1 client mount using pNFS detects a failure trying to do a
Renew (actually just a Sequence operation), the code would simply try
again and again and again every 30sec.
This would tie up the "nfscl" thread, which should also be doing other
things like Renews on other DSs and the MDS.
This patch adds code which closes down the TCP connection and marks it
defunct when Renew detects an failure to communicate with the DS, so
further Renews will not be attempted until a new working TCP connection to
the DS is established.
It also makes the call to nfscl_cancelreqs() unconditional, since
nfscl_cancelreqs() checks the NFSCLDS_SAMECONN flag and does so while holding
the lock.
This fix only applies to the NFSv4.1 client whne using pNFS and without it
the only effect would have been an "nfscl" thread busy doing Renew attempts
on an unresponsive DS.
MFC after: 2 weeks
Without this patch, the client side NFSv4.1 pNFS code erroneously did writes
and commits to both DS mirrors using the TCP connection of the first one.
For my test setup this worked, since I have both DSs running on the same
machine, but it would have failed when the DSs are on separate machines.
This patch fixes the code to use the correct TCP connection for each DS.
This patch should only affect the NFSv4.1 client when using "pnfs" mounts
to mirrored DSs.
MFC after: 2 weeks
The pnfsdskill(8) command will normally fail if there is no valid mirror
for the DS to be disabled. However, a system administrator may need to
disable a DS which does not have a valid mirror so that the nfsd threads
can be terminated. This patch adds the kernel code needed by pnfsdskill(8)
to implement this "forced" case of disabling a DS.
This patch only affects the pNFS server.
When the NFSv4.1 pNFS client gets an error for a DS I/O operation using a
Flexible File layout, it returns the layout with an error.
This patch changes the code slightly, so that it returns the layout for all
errors except EACCES and lets the MDS decide what to do based on the error.
It also makes a couple of changes to nfscl_layoutrecall() to ensure that
the first layoutreturn(s) will have the error in the reply.
Plus, the patch adds a wakeup() so that the "nfscl" thread won't wait 1sec
before doing the LayoutReturn.
Tested against the pNFS service.
This patch should not affect non-pNFS use of the client.
The unused "dsp" argument will be used by a future patch that disables the
connection to the DS when possible.
MFC after: 2 weeks
The Flexible File layout LayoutReturn operation has argument fields where
an I/O error encountered when attempting I/O on a DS can be reported back
to the MDS.
This patch adds code to the client to do this for the Flexible File layout
mirrored case.
This patch should only affect mounts using the "pnfs" option against servers
that support the Flexible File layout.
MFC after: 2 weeks
Four functions nfscl_reqstart(), nfscl_fillsattr(), nfsm_stateidtom()
and nfsmnt_mdssession() are now called from within the nfsd.
As such, they needed to be moved from nfscl.ko to nfscommon.ko so that
nfsd.ko would load when nfscl.ko wasn't loaded.
Reported by: herbert@gojira.at
This code merge adds a pNFS service to the NFSv4.1 server. Although it is
a large commit it should not affect behaviour for a non-pNFS NFS server.
Some documentation on how this works can be found at:
http://people.freebsd.org/~rmacklem/pnfs-planb-setup.txt
and will hopefully be turned into a proper document soon.
This is a merge of the kernel code. Userland and man page changes will
come soon, once the dust settles on this merge.
It has passed a "make universe", so I hope it will not cause build problems.
It also adds NFSv4.1 server support for the "current stateid".
Here is a brief overview of the pNFS service:
A pNFS service separates the Read/Write oeprations from all the other NFSv4.1
Metadata operations. It is hoped that this separation allows a pNFS service
to be configured that exceeds the limits of a single NFS server for either
storage capacity and/or I/O bandwidth.
It is possible to configure mirroring within the data servers (DSs) so that
the data storage file for an MDS file will be mirrored on two or more of
the DSs.
When this is used, failure of a DS will not stop the pNFS service and a
failed DS can be recovered once repaired while the pNFS service continues
to operate. Although two way mirroring would be the norm, it is possible
to set a mirroring level of up to four or the number of DSs, whichever is
less.
The Metadata server will always be a single point of failure,
just as a single NFS server is.
A Plan B pNFS service consists of a single MetaData Server (MDS) and K
Data Servers (DS), all of which are recent FreeBSD systems.
Clients will mount the MDS as they would a single NFS server.
When files are created, the MDS creates a file tree identical to what a
single NFS server creates, except that all the regular (VREG) files will
be empty. As such, if you look at the exported tree on the MDS directly
on the MDS server (not via an NFS mount), the files will all be of size 0.
Each of these files will also have two extended attributes in the system
attribute name space:
pnfsd.dsfile - This extended attrbute stores the information that
the MDS needs to find the data storage file(s) on DS(s) for this file.
pnfsd.dsattr - This extended attribute stores the Size, AccessTime, ModifyTime
and Change attributes for the file, so that the MDS doesn't need to
acquire the attributes from the DS for every Getattr operation.
For each regular (VREG) file, the MDS creates a data storage file on one
(or more if mirroring is enabled) of the DSs in one of the "dsNN"
subdirectories. The name of this file is the file handle
of the file on the MDS in hexadecimal so that the name is unique.
The DSs use subdirectories named "ds0" to "dsN" so that no one directory
gets too large. The value of "N" is set via the sysctl vfs.nfsd.dsdirsize
on the MDS, with the default being 20.
For production servers that will store a lot of files, this value should
probably be much larger.
It can be increased when the "nfsd" daemon is not running on the MDS,
once the "dsK" directories are created.
For pNFS aware NFSv4.1 clients, the FreeBSD server will return two pieces
of information to the client that allows it to do I/O directly to the DS.
DeviceInfo - This is relatively static information that defines what a DS
is. The critical bits of information returned by the FreeBSD
server is the IP address of the DS and, for the Flexible
File layout, that NFSv4.1 is to be used and that it is
"tightly coupled".
There is a "deviceid" which identifies the DeviceInfo.
Layout - This is per file and can be recalled by the server when it
is no longer valid. For the FreeBSD server, there is support
for two types of layout, call File and Flexible File layout.
Both allow the client to do I/O on the DS via NFSv4.1 I/O
operations. The Flexible File layout is a more recent variant
that allows specification of mirrors, where the client is
expected to do writes to all mirrors to maintain them in a
consistent state. The Flexible File layout also allows the
client to report I/O errors for a DS back to the MDS.
The Flexible File layout supports two variants referred to as
"tightly coupled" vs "loosely coupled". The FreeBSD server always
uses the "tightly coupled" variant where the client uses the
same credentials to do I/O on the DS as it would on the MDS.
For the "loosely coupled" variant, the layout specifies a
synthetic user/group that the client uses to do I/O on the DS.
The FreeBSD server does not do striping and always returns
layouts for the entire file. The critical information in a layout
is Read vs Read/Writea and DeviceID(s) that identify which
DS(s) the data is stored on.
At this time, the MDS generates File Layout layouts to NFSv4.1 clients
that know how to do pNFS for the non-mirrored DS case unless the sysctl
vfs.nfsd.default_flexfile is set non-zero, in which case Flexible File
layouts are generated.
The mirrored DS configuration always generates Flexible File layouts.
For NFS clients that do not support NFSv4.1 pNFS, all I/O operations
are done against the MDS which acts as a proxy for the appropriate DS(s).
When the MDS receives an I/O RPC, it will do the RPC on the DS as a proxy.
If the DS is on the same machine, the MDS/DS will do the RPC on the DS as
a proxy and so on, until the machine runs out of some resource, such as
session slots or mbufs.
As such, DSs must be separate systems from the MDS.
Tested by: james.rose@framestore.com
Relnotes: yes
Under some fairly unusual circumstances, the Linux NFSv4.1 client is
doing a BindConnectiontoSession operation for TCP connections.
It is also used by the ESXi6.5 NFSv4.1 client.
This patch adds this operation to the NFSv4.1 server.
Reported by: andreas.nagy@frequentis.com
Tested by: andreas.nagy@frequentis.com
MFC after: 2 weeks
The Linux client now uses the TestStateID operation, so this patch adds
support for it to the NFSv4.1 server. The FreeBSD client never uses this
operation, so it should not be affected.
MFC after: 2 months
pathconf(2) and fpathconf(2) both return a long. The kern_[f]pathconf()
functions now accept a pointer to a long value rather than modifying
td_retval directly. Instead, the system calls explicitly store the
returned long value in td_retval[0].
Requested by: bde
Reviewed by: kib
Sponsored by: Chelsio Communications
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
This patch adds support for the Flexible File Layout to the pNFS client.
Although the patch is rather large, it should only affect NFS mounts
using the "pnfs" option against pNFS servers that do not support File
Layout.
There are still a couple of things missing from the Flexible File Layout
client implementation:
- The code does not yet do a LayoutReturn with I/O error stats when
I/O error(s) occur when attempting to do I/O on a DS.
This will be fixed in a future commit, since it is important for the
MDS to know that I/O on a DS is failing.
- The current code does writes and commits to mirror DSs serially.
Making them happen concurrently will be done in a future commit,
after discussion on freebsd-current@ on the best way to do this.
- The code does not handle NFSv4.0 DSs. Since there is no extant pNFS
server that implements NFSv4.0 DSs and NFSv4.1 DSs makes more sense
now, I don't intend to implement this until there is a need for it.
There is support for NFSv4.1 and NFSv3 DSs.
This patch changes nfsv4_getipaddr() and nfsrpc_fillsa() to use
a sockaddr_in * and sockaddr_in6 * instead of sockaddr_storage, to
avoid allocating the latter on the stack. It also moves the nfsrpc_fillsa()
call to after the completion of parsing of the DeviceInfo reply from
the server. This patch is in preparation for addition of Flex File
Layout support in a future commit.
It only affects the "pnfs" NFSv4.1 client mount option and should not
have changed its semantics.
This patch adds "vers" and "minorvers" arguments to nfscl_reqstart().
The patch always passes them in as "0" and that implies no change
in semantics. These arguments will be used by a future commit that
adds support for the Flexible File Layout.
Make the NFSv4 pNFS client function nfsrpc_layoutget() a static, since it
is only used in sys/fs/nfsclient/nfs_clrpcops.c.
This prepares the code for future patches that add Flex File layout
support.
This patch adds a new function called nfsm_uiombuflist(), which is
similar to nfsm_uiombuf(), but doesn't not use the fields in
struct nfsrv_descript. This new function will be used by the pNFS client
for writing to mirrors using Flex Files layout.
The function is not yet called anywhere.
Also, get rid of #ifndef APPLE, which is ancient cruft left over from
the Mac OSX port of the NFSv4 client.
Simplify nfsrpc_layoutreturn() args. in preparation for the addition
of Flex File layout support, since File layout uses a 0 length field.
Flex Files does use a longer field, but that will be added in a
subsequent commit.
This patch adds support for AF_LOCAL socket upcalls to an nfsuserd daemon
that supports them. A future patch to the nfsuserd daemon will use AF_LOCAL
sockets to avoid a problem when using upcalls to 127.0.0.1 if jails are
in use.
Suggested by: dfr
PR: 205193
A NFSv4.1/pNFS server using File Layout can specify that Commit operations
are to be done against the DS instead of MDS. Since no extant pNFS
server did this, the code was untested and "#ifdef notyet".
The FreeBSD pNFS server I am developing does specify that Commits be done
through the DS, so the code has been enabled/tested.
This patch should only affect the case of a pNFS server that specfies
Commits through the DS.
PR: 219551
MFC after: 2 weeks
The code still doesn't use d_off. That will come in a future commit.
The code also removes the checks for servers returning a fileno that
doesn't fit in 32bits, since that should work ok now.
Bump __FreeBSD_version since this patch changes the interface between
the NFS kernel modules.
Reviewed by: kib
The "cred" argument of ncl_flush() is unused and it was confusing to have
the code passing in NULL for this argument in some cases. This patch deletes
this argument.
There is no semantic change because of this patch.
MFC after: 2 weeks
Some NFSv4.1 servers such as AmazonEFS can only support a small fixed number
of open_owner4s. This patch adds a mount option called "oneopenown" that
can be used for NFSv4.1 mounts to make the client do all Opens with the
same open_owner4 string. This option can only be used with NFSv4.1 and
may not work correctly when Delegations are is use.
Reported by: cperciva
Tested by: cperciva
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8988
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
* Use standard IPv6 SAS instead of rt->rt_ifa address.
* Make address lookup work for IPv6 LLA.
* Save address into buffer provided by caller instead of using static vars.
Discussed with: rmacklem
This leak was introduced by r291527.
Since the nfscommon.ko module is rarely unloaded, this leak would not
have been much of an issue.
MFC after: 2 weeks
option that will be added to the nfsuserd daemon in a future
commit. It modifies the cache used by NFSv4 for name<-->id
translation (both username/uid and group/gid) to support this.
When "-manage-gids" is set, the server looks up each uid
for the RPC and uses the list of groups cached in the server
instead of the list of groups provided in the RPC request.
The cached group list is acquired for the cache by the nfsuserd
daemon via getgrouplist(3).
This avoids the 16 groups limit for the list in the RPC request.
Since the cache is now used for every RPC when "-manage-gids"
is enabled, the code also modifies the cache to use a separate
mutex for each hash list instead of a single global mutex.
Suggested by: jpaetzel
Tested by: jpaetzel
MFC after: 2 weeks
(opens, locks, etc) is retained, which I believe is correct behaviour.
However, for NFSv4.1, the server also retained a reference to the xprt
(RPC transport socket structure) for the backchannel. This caused
svcpool_destroy() to not call SVC_DESTROY() for the xprt and allowed
a socket upcall to occur after the mutexes in the svcpool were destroyed,
causing a crash.
This patch fixes the code so that the backchannel xprt structure is
dereferenced just before svcpool_destroy() is called, so the code
does do an SVC_DESTROY() on the xprt, which shuts down the socket upcall.
Tested by: g_amanakis@yahoo.com
PR: 204340
MFC after: 2 weeks
This fix addresses only issues with the pynfs reports, none of these
issues are know to create problems for extant real clients.
Submitted by: Bart Hsiao <bart.hsiao@gmail.com>
Reworked by: myself
Reviewed by: rmacklem
Approved by: rmacklem
Sponsored by: QNAP Systems Inc.
into head. The code is not believed to have any effect
on the semantics of non-NFSv4.1 server behaviour.
It is a rather large merge, but I am hoping that there will
not be any regressions for the NFS server.
MFC after: 1 month
- Introduce additional hash to group requests by hash of sockref. This
allows to process TCP acknowledgements without looping though all the cache,
and as result allows to do it every time.
- Indroduce additional callbacks to notify application layer about sockets
disconnection. Without this last few requests processed just before socket
disconnection never processed their ACKs and stuck in cache for many hours.
- Implement transport-specific method for tracking reply acknowledgements.
New implementation does not cross multiple stack layers to get the data and
does not have race conditions that previously made some requests stuck
in cache. This could be done more efficiently at sockbuf layer, but that
would broke some KBIs, while I don't know other consumers for it aside NFS.
- Instead of traversing all DRC twice per request, run cleaning only once
per request, and except in some conditions traverse only single hash slot
at a time.
Together this limits NFS DRC growth only to situations of real connectivity
problems. If network is working well, and so all replies are acknowledged,
cache remains almost empty even after hours of heavy load. Without this
change on the same test cache was growing to many thousand requests even
with perfectly working local network.
As another result this reduces CPU time spent on the DRC handling during
SPEC NFS benchmark from about 10% to 0.5%.
Sponsored by: iXsystems, Inc.
when a Getattr for a file is done by a client other than the one that
holds the file's delegation. This would only happen when delegations
are enabled and the problem is fixed by this patch.
MFC after: 1 week
The hang occurred in nfsv4_setsequence() when it couldn't find an
available session slot and is fixed by checking for a forced dismount
in progress and just returning for this case.
MFC after: 1 month
it will work with either the old or new server.
The FHA code keeps a cache of currently active file handles for
NFSv2 and v3 requests, so that read and write requests for the same
file are directed to the same group of threads (reads) or thread
(writes). It does not currently work for NFSv4 requests. They are
more complex, and will take more work to support.
This improves read-ahead performance, especially with ZFS, if the
FHA tuning parameters are configured appropriately. Without the
FHA code, concurrent reads that are part of a sequential read from
a file will be directed to separate NFS threads. This has the
effect of confusing the ZFS zfetch (prefetch) code and makes
sequential reads significantly slower with clients like Linux that
do a lot of prefetching.
The FHA code has also been updated to direct write requests to nearby
file offsets to the same thread in the same way it batches reads,
and the FHA code will now also send writes to multiple threads when
needed.
This improves sequential write performance in ZFS, because writes
to a file are now more ordered. Since NFS writes (generally
less than 64K) are smaller than the typical ZFS record size
(usually 128K), out of order NFS writes to the same block can
trigger a read in ZFS. Sending them down the same thread increases
the odds of their being in order.
In order for multiple write threads per file in the FHA code to be
useful, writes in the NFS server have been changed to use a LK_SHARED
vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem
doesn't allow multiple writers to a file at once. ZFS is currently
the only filesystem that allows multiple writers to a file, because
it has internal file range locking. This change does not affect the
NFSv4 code.
This improves random write performance to a single file in ZFS, since
we can now have multiple writers inside ZFS at one time.
I have changed the default tuning parameters to a 22 bit (4MB)
window size (from 256K) and unlimited commands per thread as a
result of my benchmarking with ZFS.
The FHA code has been updated to allow configuring the tuning
parameters from loader tunable variables in addition to sysctl
variables. The read offset window calculation has been slightly
modified as well. Instead of having separate bins, each file
handle has a rolling window of bin_shift size. This minimizes
glitches in throughput when shifting from one bin to another.
sys/conf/files:
Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c
when either the old or the new NFS server is built.
sys/fs/nfs/nfsport.h,
sys/fs/nfs/nfs_commonport.c:
Bring in changes from Rick Macklem to newnfs_realign that
allow it to operate in blocking (M_WAITOK) or non-blocking
(M_NOWAIT) mode.
sys/fs/nfs/nfs_commonsubs.c,
sys/fs/nfs/nfs_var.h:
Bring in a change from Rick Macklem to allow telling
nfsm_dissect() whether or not to wait for mallocs.
sys/fs/nfs/nfsm_subs.h:
Bring in changes from Rick Macklem to create a new
nfsm_dissect_nonblock() inline function and
NFSM_DISSECT_NONBLOCK() macro.
sys/fs/nfs/nfs_commonkrpc.c,
sys/fs/nfsclient/nfs_clkrpc.c:
Add the malloc wait flag to a newnfs_realign() call.
sys/fs/nfsserver/nfs_nfsdkrpc.c:
Setup the new NFS server's RPC thread pool so that it will
call the FHA code.
Add the malloc flag argument to newnfs_realign().
Unstaticize newnfs_nfsv3_procid[] so that we can use it in
the FHA code.
sys/fs/nfsserver/nfs_nfsdsocket.c:
In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types
that use the LK_SHARED lock type.
sys/fs/nfsserver/nfs_nfsdport.c:
In nfsd_fhtovp(), if we're starting a write, check to see
whether the underlying filesystem supports shared writes.
If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE.
sys/nfsserver/nfs_fha.c:
Remove all code that is specific to the NFS server
implementation. Anything that is server-specific is now
accessed through a callback supplied by that server's FHA
shim in the new softc.
There are now separate sysctls and tunables for the FHA
implementations for the old and new NFS servers. The new
NFS server has its tunables under vfs.nfsd.fha, the old
NFS server's tunables are under vfs.nfsrv.fha as before.
In fha_extract_info(), use callouts for all server-specific
code. Getting file handles and offsets is now done in the
individual server's shim module.
In fha_hash_entry_choose_thread(), change the way we decide
whether two reads are in proximity to each other.
Previously, the calculation was a simple shift operation to
see whether the offsets were in the same power of 2 bucket.
The issue was that there would be a bucket (and therefore
thread) transition, even if the reads were in close
proximity. When there is a thread transition, reads wind
up going somewhat out of order, and ZFS gets confused.
The new calculation simply tries to see whether the offsets
are within 1 << bin_shift of each other. If they are, the
reads will be sent to the same thread.
The effect of this change is that for sequential reads, if
the client doesn't exceed the max_reqs_per_nfsd parameter
and the bin_shift is set to a reasonable value (22, or
4MB works well in my tests), the reads in any sequential
stream will largely be confined to a single thread.
Change fha_assign() so that it takes a softc argument. It
is now called from the individual server's shim code, which
will pass in the softc.
Change fhe_stats_sysctl() so that it takes a softc
parameter. It is now called from the individual server's
shim code. Add the current offset to the list of things
printed out about each active thread.
Change the num_reads and num_writes counters in the
fha_hash_entry structure to 32-bit values, and rename them
num_rw and num_exclusive, respectively, to reflect their
changed usage.
Add an enable sysctl and tunable that allows the user to
disable the FHA code (when vfs.XXX.fha.enable = 0). This
is useful for before/after performance comparisons.
nfs_fha.h:
Move most structure definitions out of nfs_fha.c and into
the header file, so that the individual server shims can
see them.
Change the default bin_shift to 22 (4MB) instead of 18
(256K). Allow unlimited commands per thread.
sys/nfsserver/nfs_fha_old.c,
sys/nfsserver/nfs_fha_old.h,
sys/fs/nfsserver/nfs_fha_new.c,
sys/fs/nfsserver/nfs_fha_new.h:
Add shims for the old and new NFS servers to interface with
the FHA code, and callbacks for the
The shims contain all of the code and definitions that are
specific to the NFS servers.
They setup the server-specific callbacks and set the server
name for the sysctl and loader tunable variables.
sys/nfsserver/nfs_srvkrpc.c:
Configure the RPC code to call fhaold_assign() instead of
fha_assign().
sys/modules/nfsd/Makefile:
Add nfs_fha.c and nfs_fha_new.c.
sys/modules/nfsserver/Makefile:
Add nfs_fha_old.c.
Reviewed by: rmacklem
Sponsored by: Spectra Logic
MFC after: 2 weeks
to head. I don't think the NFS client behaviour will change unless
the new "minorversion=1" mount option is used. It includes basic
NFSv4.1 support plus support for pNFS using the Files Layout only.
All problems detecting during an NFSv4.1 Bakeathon testing event
in June 2012 have been resolved in this code and it has been tested
against the NFSv4.1 server available to me.
Although not reviewed, I believe that kib@ has looked at it.
which dumps out the actual options being used by an NFS mount.
This will be used to implement a "-m" option for nfsstat(1).
Reviewed by: alfred
MFC after: 2 weeks
and owner_group strings that consist entirely of
digits, interpreting them as the uid/gid number.
This change was needed since new (>= 3.3) Linux
servers reply with these strings by default.
This change is mandated by the rfc3530bis draft.
Reported on freebsd-stable@ under the Subject
heading "Problem with Linux >= 3.3 as NFSv4 server"
by Norbert Aschendorff on Aug. 20, 2012.
Tested by: norbert.aschendorff at yahoo.de
Reviewed by: jhb
MFC after: 2 weeks
client. This does not change the client's behaviour, but prepares
the code so that nfsrpc_rellockown() can be called elsewhere in a
future commit.
MFC after: 2 weeks
