This option is intended to aid development, to allow building with user malloc.
The use case would be to build userboot & test with libc (or other) malloc and
use extra malloc debug features.
Now that LLD 10 is out, and required patches have landed, we are now ready
to finally switch away from the ancient in-tree ld.bfd.
Special thanks to Fangrui Song for many hours of work on getting the
32-bit powerpc lld ready for prime-time.
Reviewed by: emaste (earlier revision), jhibbits
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D24111
We need a valid st_dev, st_ino and st_mtime
to correctly track which files have been verified
and to update our notion of time.
ve_utc_set(): ignore utc if it would jump our current time
by more than VE_UTC_MAX_JUMP (20 years).
Allow testing of install command via userboot.
Need to fix its stat implementation too.
bhyveload also needs stat fixed - due to change to userboot.h
Call ve_error_get() from vectx_close() when hash is wrong.
Track the names of files we have hashed into pcr
For the purposes of measured boot, it is important
to be able to reproduce the hash reflected in
loader.ve.pcr
so loader.ve.hashed provides a list of names in the order they
were added.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D24027
we have crc32(const void *, size_t) in libsa. Unfortunately zlib has
crc32(long, const unigned char *, unsigned) and we have conflict.
Since we do build libsa with zlib, we can use zlib version instead.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D24068
armv7 crash due to misligned access of dos_partition dp_start field.
Allocate and make copy of dos_partition array to make sure the data
is aligned.
Reported by: marklmi at yahoo.com
This hook can be useful, for example to run a local function to choose
different modules to load when a user has picked a different kernel
from the menu.
Reviewed by: kevans
Approved by: mav (mentor)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D24115
The SCR, scratch register was not present on the 8250 and 8250B UART, so we
can use to test if we actually do have serial port.
We need this test because some systems will get long delays while attempting
to write to non-existing port and this will slow down the console IO
to extreme.
MFC after: 1 week
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
LLD 10.0.0 changed the behavior of the -Ttext option, so that using
-Ttext=0x0 now causes linking of the loaders to fail with:
ld: error: output file too large: 18446744073707016908 bytes
I reported this in https://bugs.llvm.org/show_bug.cgi?id=44715, and
initially reverted the upstream change in r357259 to work around it.
However, after some discussion with Fangrui Song in the upstream ticket,
I think we can classify this as an unfortunate interaction between using
-Ttext=0 in combination with --no-rosegment. (We added the latter
in r332090, because btxld does not correctly handle input with more
than 2 PT_LOAD segments.)
Fangrui suggested to use a linker script instead, and Warner was already
attempting this in r305353, but had to revert it due to "crypto-using
boot problems" (not sure what those were :).
This review updates the stand/i386/boot.ldscript to handle more
sections, inserts some symbols like _edata and such that we use in
libsa, and also discards any .interp section.
It uses ORG which is defined on the linker command line using
--defsym ORG=value to set the start of all the sections.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23952
Before this change, LLD10 was creating several extra PT_LOAD sections,
which OFW does not understand.
Like we do for the kernel already, specify the program headers manually.
Additionally, to work around a crash in our base ld.bfd, we need to
actually assign something to the output section. LLD does not need this.
One side effect of this change is the removal of the GNU_STACK header.
This is more correct, since we are using a statically-allocated stack and
RWX mappings across the board this early in boot.
Reviewed by: jhibbits, Fangrui Song <i@maskray.me>
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23778
smbios used to be an i386 only kinda weird quirk to the x86
architecture. But UEFI picked it up, dusted it off and now it's many
other locations. Make it base technology by moving it to libsa and
fixing up the compliation. The code has issues with unaligned access
still, but that will be addressed in a followup commit.
Differential Revision: https://reviews.freebsd.org/D23660
Create a ptov() function. It's basically the same as the btx PTOV
macro, but works everywhere. smbios needs this to translate addresses,
but the translation differs between BIOS booting and EFI booting. Make
it a function so one smbios.o can be used everywhere. Provide
definitions for it in the two loaders affected.
Differential Revision: https://reviews.freebsd.org/D23660
We still need to set the hooks to prevent improper manipulations thereafter
at the loader prompt, but as it is we're actively preventing loaddev from
being set correctly in some circumstances (ZFS in particular) and doing more
work than needed with currdev -- that hook in particular validates it as a
correct device, which we can assume isn't needed in this context.
Reviewed by: imp, sigsys@gmail.com
Submitted/Diagnosed by: sigsys@gmail.com
Differential Revision: https://reviews.freebsd.org/D23390
If we hit an error at this level, we are almost certainly not in any kind
of sane state where autoboot can do the right thing. Instead of letting it
try and probably failing, disable autoboot so they immediately get kicked
into a loader prompt for manual remediation/diagnosis.
Reviewed by: tsoome
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D23611
vdev_read_pad2() does read VDEV_PAD_SIZE of data, and will copy size bytes
of it, hence, we need buffer of VDEV_PAD_SIZE bytes.
Issue introduced in r357497.
Reported by: se
CD boot is broken for some systems since bioscd and biosdisk merge. The issue is that we can not use anything else than int 13 ah=0x4b to query cd information.
The patch does restore the same probe as was originally used in bioscd.c. Additionally extra buffer padding is used to avoid memory corruption caused by some systems.
PR: 234031
Reported by: ultramage and others
MFC after: 1 day
stand/i386/gptboot/gptldr.S:141:3: error: value of 36878 is too large for field of 2 bytes.
jmp MEM_JMP # Start BTX
^
Use the same construct as in stand/i386/boot2/boot1.S, which ensures the
jump distance does not become too large.
MFC after: 3 days
This may be used for the local module to hook in and load any additional
modules that it wants, since it can't modify the modules table internal to
config. We may consider adding API to do so at a later time, but I suspect
it will be more complicated to use with little return.
status is captured but ignored for the purpose of loading the hook. status
will be false if *any* module failed to load, but we typically don't let
that halt the boot so there's no reason to let it halt hooks. Some vendors
or setups may have expected fails that would be actively thwarted by
checking it.
We may, at a later date, consider adding an API for letting non-config
modules check which modules have successfully (or not) loaded in case an
unexpected failure *should* halt whatever they are doing.
MFC after: 3 days
The major problem with the current ordering is that loader.conf may contain
all of the magic we need to actually setup the console, so loading local.lua
prior to that can make it excessively difficult and annoying to debug
(whoops, sorry Ravi & Warner).
The new ordering has some implications, but I suspect they are a non-issue.
The first is that it's no longer possible for the local module to inject any
logic prior to loading config -- I suspect no one has relied on this. The
second implication is that the config.loaded hook is now useless, as the
local module will always be included after that hook would have fired.
For config.loaded, I will opt to leave it in, just in case we add an early
point for local lua to get injected or in case one wants to schedule some
deferred logic in a custom loader.lua. The overhead of having it if no hooks
will be invoked is relatively minimal.
Diagnosed by: imp
Reported by: imp, rpokala (most likely)
MFC after: 3 days
As a new x86 CPU vendor, Chengdu Haiguang IC Design Co., Ltd (Hygon)
is a joint venture between AMD and Haiguang Information Technology Co.,
Ltd., aims at providing x86 processors for China server market.
The first generation Hygon processor(Dhyana) shares most architecture
with AMD's family 17h, but with different CPU vendor ID("HygonGenuine")
and PCI vendor ID(0x1d94) and family series number 18h(Hygon negotiated
with AMD to confirm that only Hygon use family 18h).
To enable Hygon Dhyana support in FreeBSD, add new definitions
HYGON_VENDOR_ID("HygonGenuine") and X86_VENDOR_HYGON(0x1d94) to identify
Hygon Dhyana CPU.
Initialize the CPU features(topology, local APIC ext, MSI, TSC, hwpstate,
MCA, DEBUG_CTL, etc) for amd64 and i386 mode by sharing the code path of
AMD family 17h.
The changes have been applied on FreeBSD 13.0-CURRENT and tested
successfully on Hygon Dhyana processor.
References:
[1] Linux kernel patches for Hygon Dhyana, merged in 4.20:
https://git.kernel.org/tip/c9661c1e80b609cd038db7c908e061f0535804ef
[2] MSR and CPUID definition:
https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf
Submitted by: Pu Wen <puwen@hygon.cn>
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23163
Due to the way u-boot for 32-bit powerpc is compiled, the interrupt code
assumes that the GOT pointer (r30) on u-boot is always intact.
When making syscalls to u-boot, ensure that we have restored r30 like we
found it before we enable interrupts to prevent u-boot from crashing if a
timer interrupt was pending.
This fixes ubldr on e500 qemu (assuming you have recompiled qemu's u-boot
with API support!)
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D23258
Currently, our overlay blob will grow to include the size of the complete
overlay blob we're applying. This doesn't scale very well with a lot of
overlays- they tend to include a lot of overhead, and they will generally
only add a fraction of their total size to the blob they're being applied
to.
To combat this, pack the blob as we apply new overlays and keep track of how
many overlays we've applied. Only ubldr has any fixups to be applied after
overlays, so we only need to re-pad the blob in ubldr. Presumably the
allocation won't fail since we just did a lot worse in trying to apply
overlays and succeeded.
I have no intention of removing the padding in make_dtb.sh. There might be
an argument to be had over whether it should be configurable, since ubldr
*is* the only loader that actually has fixups to be applied and we can do
this at runtime, but I'm not too concerned about this.
This diff has been sitting in Phabricator for a year and a half, but I've
decided to flush it as it does make sure that we're scaling the blob
appropriately and leave room at the end for fixups in case of some freak
circumstance where applying overlays leaves us with a blob of insufficient
size.
Reviewed by: gonzo (a long time ago)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14133
Since rS330365, there has been no particular reason for libofw to be in a
subdirectory of ofw. Move libofw up a level to make it fit in better with
the other top level libraries.
Also add a LIBOFWSRC to stand/defs.mk to match what all the other
libraries are doing.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D23000
Summary:
This patch is to support ongoing work for replacing "GCC/BFD" by "CLANG/LLD" on
target PowerPC64 [1], by proposing a way to specify and/or locate a secondary
ld.bfd linker.
This is necessary as LLD currently doesn't support PowerPC 32 bits, so we keep
using BFD for the 32 bit stuff on PowePC64(LIB32 compatibility and
STAND/slof/loader.)
- creates LD_BFD variable pointing to ld.bfd
- use LD_BFD as linker for LIB32/compat
- Default behavior for other platforms aren't changed.
[1] https://wiki.freebsd.org/powerpc/llvm-elfv2
Submitted by: alfredo.junior_eldorado.org.br
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D20261
partitions can have 128 partitions, so parse contiguous digits and then
validate that the number is between 1-128 inclusive.
I'm not sure 128 is a hard limit in the GPT standard, but it's the common
number in use, and it's a better upper limit than 9.
This uses the new layout of the upstream repository, which was recently
migrated to GitHub, and converted into a "monorepo". That is, most of
the earlier separate sub-projects with their own branches and tags were
consolidated into one top-level directory, and are now branched and
tagged together.
Updating the vendor area to match this layout is next.
From UEFI specification 2.8, page 434:
"It should also be noted that certain input devices may not be able to produce
shift or toggle state information, and in those cases the high order bit in
the respective Toggle and Shift state fields should not be active."
But we still need to check for ScanCode and UnicodeChar.
PR: 242660
Reported by: Trond Endrestol
MFC after: 1 week
For all the INT13 calls, use symbolic names instead of magic numbers. This makes
it easier to understand what the code is doing w/o a trip to google to find what
these numbers mean.
In some cases the pool discovery will get stuck in infinite loop while setting
up the vdev children.
To fix, we split the vdev setup into two parts, first we create vdevs based on
configuration we do get from pool label, then, we process pool config from MOS
and update the pool config if needed.
Testing done: confirm previously hung loader is not hung any more.
MFC after: 1 week
Instead of passing NULL to fzap_name_equal and crashing, just return
ENOENT. This happened when higher bits of a hash of the searched key
(its hash prefix) matched a hash prefix of some key in the ZAP, but the
full hash value of the searched key did not match any key in the ZAP.
I observerved this problem when loader tried to look up
"features_for_read" in a particular old pool that predates pool
features.
MFC after: 2 weeks
Sponsored by: Panzura
We do allocate amount of memory (void * or char *), and then assign this
buffer to struct iso_primary_descriptor *vd. Make sure we do
allocate enough bytes.
In fact we do allocate enough, but it is good idea to make sure this really
is so.
MFC after: 1 week
Lua allocates LUAL_BUFFERSIZE buffers on the stack for various string
functions (string.format, string.gsub) -- this works out to be somewhat
significant and not necessary, based on how we use string operations.
Dropping it risks having to allocate per call to format/gsub, but this is
not the case for our usage. This simply stops allocating 8K buffers on the
stack when luaL_Buffer is used.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22500
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
Summary:
There's no need to use the fallback fls() and flsl() libkern functions
when the PowerISA includes instructions that already do the bulk of the
work. Take advantage of this through the GCC builtins __builtin_clz()
and __builtin_clzl().
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D22340
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
r354247 converted try_include to lfs + dofile with the loader.lua_path added
just before. Fortunately, there was a hardcoded /boot/lua fallback in case
loader.lua_path wasn't being set yet- I typo'd it as loader.lua_paths.
Fix the typo.
X-MFC-With: r354247
MFC after: 3 days
Just as disks can have nested partitions, the same happens with cd devices,
so we need to detect device paths and make sure we will not mix the handles.
To address this:
we fetch handle array and create linked list of block devices.
we walk the list and detect parent devices and set children pd_parent.
for {fd, cd, hd}, we walk device list and pick up our devices and store to
corresponding list. We make sure we store parent device first.
For sorting we use 3 steps: We check for floppy, we check for cd and then
everything else must be hd.
In general, it seems the floppy devices have no parent.
CD can have both parents and children (multiple boot entries, partitions
from the hybrid disk image).
Tested by: cross+freebsd@distal.com on Cisco UCS systems, C200 series (C220M5, C240M4).
Also on MBP with UEFI 1.10
Reported by: Chriss Ross
MFC after: 1w
Differential Revision: https://reviews.freebsd.org/D22553
RB_MULTIPLE without RB_SERIAL set is valid, and means 'Video first, then serial'
to the kernel (so kernel messages go to both, but /etc/rc uses video console
(this should be fixed, btw, but another day)). Check for RB_MULTIPLE as well as
RB_SERIAL where we want to to serial things. This means we'll use the old code
for emulation in these situations, which is likely best since we're outputing to
both and the old code is ligher weight allowing both to keep up w/o weird
scrolling things.
With a very large kernel or module the staging area may be too small to
hold it. When this is the case try to allocate more space before failing
in the efi copyin/copyout/readin functions.
Reviewed by: imp, tsoome
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22569
illumos/illumos-gate@663207adb1663207adb1
10601 Pool allocation classes
https://www.illumos.org/issues/10601
illumos port of ZoL Pool allocation classes. Includes at least these two
commits:
441709695 Pool allocation classes misplacing small file blocks
cc99f275a Pool allocation classes
10757 Add -gLp to zpool subcommands for alt vdev names
https://www.illumos.org/issues/10757
Port from ZoL of
d2f3e292d Add -gLp to zpool subcommands for alt vdev names
Note that a subsequent ZoL commit changed -p to -P
a77f29f93 Change full path subcommand flag from -p to -P
Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Portions contributed by: Håkan Johansson <f96hajo@chalmers.se>
Portions contributed by: Richard Yao <ryao@gentoo.org>
Portions contributed by: Chunwei Chen <david.chen@nutanix.com>
Portions contributed by: loli10K <ezomori.nozomu@gmail.com>
Author: Don Brady <don.brady@delphix.com>
11541 allocation_classes feature must be enabled to add log device
illumos/illumos-gate@c1064fd7cec1064fd7cehttps://www.illumos.org/issues/11541
After the allocation_classes feature was integrated, one can no longer add a
log device to a pool unless that feature is enabled. There is an explicit check
for this, but it is unnecessary in the case of log devices, so we should handle
this better instead of forcing the feature to be enabled.
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
FreeBSD notes.
I faithfully added the new -g, -L, -P flags, but only -g does something:
vdev GUIDs are displayed instead of device names. -L, resolve symlinks,
and -P, display full disk paths, do nothing at the moment.
The use of special vdevs is backward compatible for read-only access, so
root pools should be bootable, but exercise caution.
MFC after: 4 weeks
FreeBSDlua ("flua") is a FreeBSD-private lua, flavored with whatever
extensions we need for base system operations. We currently support a subset
of lfs and lposix that are used in the rewrite of makesyscall.sh into lua,
added in r354786.
flua is intentionally written such that one can install standard lua and
some set of lua modules from ports and achieve the same effect.
linit_flua is a copy of linit.c from contrib/lua with lfs and lposix added
in. This is similar to what we do in stand/. linit.c has been renamed to
make it clear that this has flua-specific bits.
luaconf has been slightly obfuscated to make extensions more difficult. Part
of the problem is that flua is already hard enough to use as a bootstrap
tool because it's not in PATH- attempting to do extension loading would
require a special bootstrap version of flua with paths changed to protect
the innocent.
src.lua.mk has been added to make it easy for in-tree stuff to find flua,
whether it's bootstrap-flua or relying on PATH frobbing by Makefile.inc1.
Reviewed by: brooks, emaste (both earlier version), imp
Differential Revision: https://reviews.freebsd.org/D21893
Include the server IP address when logging nfs_open(), add a few missing
"\n"s, and correct a typo.
Reviewed by: kevans
MFC after: 2 weeks
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D22346
In our case the structure is more complex and simple static initializer
will upset compiler diagnostics - using memset is still better than building
more complext initializer.
In the EFI implementation in U-Boot no ConOut efi variable is created,
this cause loader to fallback to TERM_EMU implementation which is very
very very slow (and uses the ConOut device in the system table anyway).
The UEFI spec aren't clear as if this variable needs to exists or not.
Reviewed by: imp, kevans
UEFI 1.10 on macs does not seem to provide devpath to name translation,
provide our own (limited) version, so we can get information about commmon
devices.
MFC after: 1 week
The macos does create Vendor Media devices on top of APFS container
(like partition table inside the partition), so we need to collect such
devices into respective device tree.
MFC after: 1 week
Since physical device asize is calculated from psize and the asize is stored
in pool label, we can use asize to set the value of psize, which is used to
calculate the location of the pool labels.
MFC after: 1 week
Port illumos change: https://www.illumos.org/issues/11667
Move lz4.c out of zfs tree to opensolaris/common/lz4, adjust it to be
usable from kernel/stand/userland builds, so we can use just one single
source. Add lz4.h to declare lz4_compress() and lz4_decompress().
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22037
In case of efi console having serial backend (video + serial or only serial),
we need to stick with old emulator till we can draw console.
Eventually we would need to get console terminal emulator to be removed
from serial console because the serial link already has the terminal.
However, we need to implement comconsole on all efi platforms first, then
we need the ability to draw console, so we do not have to use SimpleTextOutput
protocol (which will write both on video and serial in case of multiplexed
ComOut).
Differential Revision: https://reviews.freebsd.org/D22161
Actual modules get require()'d in, rather than try_include(). All instances
of try_include should be provided with proper hooks/API in the rest of
loader to do the work they need to do, since we can't rely on them to exist.
Convert this now to lfs + dofile since we won't really be treating them as
modules.
lfs is required because dofile will properly throw an error if the file
doesn't exist, which is not in the spirit of 'optionally included'.
Getting out of the pcall game allows us to provide a loader.exit() style
call that backs out to the common bits of loader (autoboot sequence unless
disabled with a loader.setenv("autoboot_delay", "NO")). The most ideal way
identified so far to implement loader.exit() is to throw a special
abort-style error that indicates to the caller in interp_lua that we've not
actually errored out, just continue execution. Otherwise, we have to hack in
logic to bubble up and return from loader.lua without continuing further,
which gets kind of ugly depending on the context in which we're aborting.
A compat shim is provided temporarily in case the executing loader doesn't
yet have loader.lua_path, which was just added in r354246.
As described previously, loader.lua_path is absolute path where scripts are
installed. A future commit will use this to build paths for dofile in
try_include, rather than the current pcall/require setup that makes it more
difficult to coordinate loader aborts from local.lua -- we do not need the
flexibility of require(), and local.lua is in-fact not a 'module-like' file
as we will not be referencing anything from it.
Multiple places coordinate to 'know' where lua scripts are installed. Knock
this down to being formally defined (and overridable) in exactly one spot,
defs.mk, and spread the knowledge to loaders and liblua alike. A future
commit will expose this to lua as loader.lua_path, so it can build absolute
paths to lua scripts as needed.
MFC after: 1 week
Add ficl words for isvirtualized
and move ficl inb and outb words to ficl/x86/sysdep.c
so can be shared by i386 and amd64
Reviewed by: imp bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22069
PATH_BOOTABLE_TOKEN can be set to a non-standard
path that identifies a device as bootable.
Reviewed by: kevans, bcran
Differential Revision: https://reviews.freebsd.org/D22062
Previously color.disabled would be calculated at color module load time,
then never touched again. We can detect serial boots beyond just what we're
told by loader.conf(5) so this works out in many cases, but we must
re-evaluate the situation after the config is loaded to make sure we're not
supposed to be forcing it enabled/disabled.
Discovered while trying to test r353872.
When colors are disabled, color.escape{fg,bg} would return the passed in
color rather than the proper ANSI sequence for the color.
color.escape{fg,bg} would be wrong.
Instead return '', as the associated reset* functions will also return ''.
This should get rid of the funky '2' and '4' in the kernel selector if
you're booting serial.
Reported by: npn
When zfs probe did fail and no spa was created, but zfs_fmtdev() is called,
we will crash while dereferencing spa (NULL pointer dereference).
MFC after: 1 week
PATH_BOOTABLE_TOKEN can be set to a non-standard
path that identifies a device as bootable.
Reviewed by: kevans, bcran
Differential Revision: https://reviews.freebsd.org/D22062
Add generic PVR values for PowerISA 2.07 and 3.00. This allows booting pseries
in QEMU with compatibilty mode enabled.
Submitted by: Shawn Anastasio <shawn@anastas.io>
This was committed due to what was later diagnosed as an msdosfs bug
preventing in-place strip. This bug was fixed in r352564, and we agreed to
keep the workaround in for a bit to allow the driver fix a suitable amount
of propagation time for folks building/installing powerpc/ubldr, seeing as
how we were not in any hurry to revert.
Logic was backwards. The function returns true if it *is* running as a
hypervisor, whereas we want to only call the CAS utility if we're running as a
guest.
Reported by: Shawn Anastasio <shawn@anastas.io>
Since local UEFI console is implemented on top of framebuffer,
we need to avoid redrawing the whole screen ourselves, but let
Simple Text Mode to do the scroll for us.
Add settable variables to control teken default color attributes.
The supported colors are 0-7 or basic color names:
black, red, green, brown, blue, magenta, cyan, white.
The current implementation does add some duplication which will be addressed
later.
It's not uncommon these days for the terminals attached to serial consoles
to support ANSI escape sequences. However, we assume escape sequences may
break some serial consoles and default to not using them when boot_serial or
boot_multicons (or if console contains "comconsole" in the forth loader) for
broader compatibility. We also have loader_color which can be explicitly set
to "NO" to disable the use of ANSI escape sequences.
The problem is that loader_color=YES gets ignored when boot_serial=YES or
boot_multicons=YES (or when console contains "comconsole" in the forth
loader).
To fix, the existing default behavior remains unchanged when loader_color is
unset, loader_color=NO explicitly disables the use of ANSI escape sequences
still, and the change is that loader_color=YES can now be used to explicitly
allow ANSI escapes when a serial console is enabled.
Submitted by: Ryan Moeller <ryan@ixsystems.com>
Reviewed by: tsoome (forth), kevans (lua)
MFC after: 1 week
Sponsored by: iXsystems, Inc. (Ryan)
Differential Revision: https://reviews.freebsd.org/D21732
Summary:
Install's strip capability, by way of strip(1), doesn't seem to work
correctly on msdosfs, and instead ends up truncating the resulting
binary to 0-length. As a workaround, don't strip ubldr(8). This
fixes installworld on Book-E ubldr-based platforms, which prior to this
would need to manually install ubldr separately after installworld, in
order to have a functional ubldr.
The same thing could be done on PowerNV platforms that use msdosfs /boot
volumes, since loader and loader.kboot, etc, all get truncated to 0 on
install. However, PowerNV does not use loader, instead loading from
petitboot, so it's not really necessary at this time.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D21725
BFD appears to silently truncate 0xffffffff80800000 when it processes the
ldscript for 32-bit mips, but LLD chokes on it as the linker script tries to
place elements above 32-bit range. It's unclear to me if silent truncation
is kosher or not and whether this patch is really what we want to do, but it
is one approach at least.
Reviewed by: imp, mizhka
Differential Revision: https://reviews.freebsd.org/D21487
UEFI specification 2.7A, EFI_BLOCK_IO_PROTOCOL, page 566.
The ioalign property does define the alignment of data buffer.
If the alignment is required and our buffer is not aligned, or if
the data buffer is not multiple of Blocksize, we need to use bounce buffer
to perform the block IO. This is much like with BIOS version, except
there the INT13 needs buffer to be located in low memory.
Additionally, we need to handle disk writes properly.
Clean up libstand zalloc* sources. Note that it is not 100% whitespace cleanup.
I also reduced block in znalloc and zfree as those were obvious simplifications
and did help to save one level of indent.
This command will trigger a reload of the configuration from disk. This is
useful if you've changed currdev from recovery media to local disk as much
as I have over the past ~2 hours and are tired of the extra keystrokes.
This is really just a glorified shortcut, but reload-conf is likely easier
to remember for other people and does save some keystrokes when reloading
the configuration. It is also resilient to the underlying config method
changing interface, but this is unlikely to happen.
MFC after: 1 week
The box drawing characters we use aren't necessarily safe with a serial
console; for instance, in the report by npn@, these were causing his xterm
to send back a sequence that lua picked up as input and halted the boot.
This is less than ideal.
Fallback to ASCII frames for console with 'comconsole' in it. This is a
partial revert r338108 by imp@ -- instead of removing the menu entirely and
disabling color/cursor sequences, just reverting the default frame to ASCII
is enough to not break in this setup.
Reported by: npn
Triaged and recommended by: tsoome
--gc-sections is not really useful unless we generate sections with
-ffunction-sections -fdata-sections
While there, i386/loader would win from --gc-sections too.
Summary:
There is logic in ELF loadimage() to relocate kernels, but currently
only type ET_EXEC. PowerPC kernels are ET_DYN, and can be relocated anywhere.
Add the load offset to kernel entry points on this platform.
Reviewed by: imp, ian
Differential Revision: https://reviews.freebsd.org/D21286
Replace mini cons25 emulator with teken, this does enable us proper console
terminal for loader and will make it possible to implement different
back end callbacks to draw to screen.
At this time we still only "draw" in text mode.
