o Use a directory layout that is more akin to the i386 boot layout.
o Create a libat91 for library routines that are used by one or more
of the boot loaders.
o Create bootiic for booting from an iic part.
o Create bootspi for booting from an spi part.
o Optimize the size of many of these routines (especially emac.c). Except
for the emac.c optimizations, all these have been tested.
o eliminate the inc directory, libat91 superceeds it.
o Move linker.cfg up a layer to allow it to be shared.
state structure. This field is only for CCBs that are associated with
actions that are occurring on the HBA (i.e., XPT_CONT_IO actions).
This way we also don't get confused when the upstream listener stalls
try and look at a CCB which has already been freed (by CAM).
to reduce the pv_entry_count counter. This was found by Tor Egge. In the
same email, Tor also pointed out the pv_stats problem in the previous
commit, but I'd forgotten about it until I went looking for this email
about this allocation problem.
locked. In general the adaptive spinning is similar to the same code
for mutexes with some extra trickiness in rw_wunlock_hard(). Specifically,
even though both wait bits might be set and we might have a turnstile with
at least one waiting thread, there might not be any threads blocked on the
queue we are not waking up (they might all be spinning), and we should
only preserve the waiting flag for the queue we aren't waking up if there
are in fact threads blocked on that queue. Secondly, there might not be
any threads blocked on the queue we have chosen to waken threads from
(there might only be threads blocked on the other queue and the threads
for this queue are all spinning) in which case we disown the turnstile
instead of doing a braodcast and unpend.
stored in metadata instead of an offset in single disk.
After reboot/crash synchronization process started from a wrong offset
skipping (not synchronizing) part of the component which can lead to data
corrutpion (when synchronization process was interrupted on initial
synchronization) or other strange situations like 'graid3 status' showing
value more than 100%.
Reported, reviewed and tested by: ru
Reported by: Dmitry Morozovsky <marck@rinet.ru>
MFC after: 1 day
as pcf_ebus and pcf_isa, they should probably be fixed back to pcf),
and bti2c doesn't exist, bktr has smbus or iicbb as children..
Brought to you by: http://people.FreeBSD.org/~jmg/driver.pdf
use it in places that only care about the write owner instead of
rw_owner() as a baby step towards limited read-lock owner.
- Tidy the code that sets the WAITER flag bits to not duplicate a test
around the atomic operation and the KTR trace in both of the lock
functions.
above what's used for fast interrupts, only interrupts with the level of
the interrupt which led to calling intr_fast() (which is used with both
fast and ithread interrupts) are blocked while in that function. Thus
intr_fast() can be preempted by a fast interrupt (which are of a higher
level than ithread interrupts) while servicing an ithread interrupt. This
can lead to a stale pointer to the head of the active interrupt requests
list when back in the ithread interrupt invocation of intr_fast(), in turn
resulting in corruption of the interrupt request lists and consequently
in a panic. Solve this be turning off interrupts in intr_fast() before
reading the pointer to the head of the active list rather than after. [1]
- Add a KASSERT in intr_fast() which asserts that ir_func is non-zero before
calling it. [1]
- Increment interrupt stats after calling the handlers rather than before.
This reduces the delay until direct and fast handlers are serviced, in my
testings by 30% on average for the direct tick interrupt handler, in turn
resulting in less clock drift.
PR: 94778 [1]
Submitted by: Andrew Belashov [1]
MFC after: 2 weeks
with a given module_t. I use this in some the MOD_LOAD event handler for
some test kernel modules to ask the kernel linker to look up the linker
sets in my test modules. (I use linker sets to generate the list of
possible events that I then signal to execute via a sysctl. On non-amd64,
ld(8) would resolve the entire linker set, but on amd64 I have to ask the
kernel linker to do it for me, and having the kernel linker do it works on
all archs.)
if the specified priority is zero. This avoids a race where the calling
thread could read a snapshot of it's current priority, then a different
thread could change the first thread's priority, then the original thread
would call sched_prio() inside msleep() undoing the change made by the
second thread. I used a priority of zero as no thread that calls msleep()
or tsleep() should be specifying a priority of zero anyway.
The various places that passed 'curthread->td_priority' or some variant
as the priority now pass 0.
have not been passed to the h/w yet. This remedies watchdog timeout
of buffered multicast frames in hostap mode.
While here eliminate an extraneous check; ieee80211_beacon_update sets
the tim bit based on ncabq != 0 so there's no reason to check it too.
Noticed by: Christophe Prevotaux
compiler doesn't decide to cache td_state. Cachine the state would cause
the spinning thread to not notice when the owning thread stopped executing
(if it was preempted for example) which could result in livelock.
than keeping it locked until we exit the function to optimize the case
where the lock would be dropped and later reacquired. The optimization
was broken when kevent's were moved from UFS to VFS and the knote list
lock for a vnode kevent became the lockmgr vnode lock. If one tried
to use a kqueue that contained events for a kqueue fd followed by a vnode,
then the kq global lock would end up being held when the vnode lock was
acquired which could result in sleeping with a mutex held (and subsequent
panics) if the vnode lock was contested.
Reviewed by: jmg
Tested by: ps (on 6.x)
MFC after: 3 days
not need to clear it now, this should fix panic when msleep is recursivly
called. Patch is slightly adjusted after review.
Reviewed by: jhb
Tested by: Csaba Henk, csaba-ml at creo.hu
MFC after: 3 days
Strong candidate for backport to 6.x.
When allocating new blocks, the search for block group beginnings
would fail with a segfault. There was a side-effect read access with
an off-by-one errors. The results were not used in the error case so
the code worked in the past. But now the FreeBSD kernel has tighter
mappings and the word accessed is not mapped (for me).
The Linux kernel has rewritten most of the allocation strategy by now.
Also, the Linux kernel cleaned up the integration of these files and
it look feasable to wrap the original Linux files in wrapper that
provides their favorite arguments instead of dragging around our own
code.
For 32-bit SDRAM systems, enable D16 to D31 in the PIO controller.
Otherwise they read back as 0xffff.
Shave 8 bytes from the object size by using AT91C_BASE_PIOA directly
and by not assigning PIO_BSR to 0 in the DBGU init. That's a nop in
two ways (everything defaults to peripheral A, and writing 0 changes
nothing).
Many places used #define FOO ((unsigned int) 0x23) where a simpler
#define FOO 0x23u would have sufficed. This practice is overly
verbose and has the disadvantage that you can't say
#if FOO == BAR
#endif
because the extra "unsigned int" tokens choke cpp's little brain.
Migrate to the latter style to allow use in preprocessor statements.
The two are the same semantically anyway in a C context (at least for
the uses they are put to presently, C gurus can explain to me how they
differ).
via xmodem to the DBGU port when the AT91 comes up in recovery mode.
The recovery loader will then load your program via xmodem into SDRAM
at 1MB which can do its things. It needs to be tweaked to the
specific board one is using, but it fits in < 1kB (all of Atmel's ARM
products have at least 8kb of SRAM that I can tell, so this should
work for them all).
Parts of this code were provided by Kwikbyte with copyright
specifically disclaimed. I heavily modified it to act as a recovery
loader (before it was a bootstrap loader) and to optimize for size
(before I started the size was closer to 8k).
Bootstrap loaders for SPI and IIC to follow.
create managed mappings within the clean submap. To prevent regressions,
add assertions blocking the creation of managed mappings within the clean
submap.
Reviewed by: tegge
UDPv6 delivery.
Lock the inpcb of the UDP connection being delivered to before
processing IPSEC policy and other delivery activities.
MFC after: 3 months
Otherwise, we could match on a filename that had the wrong last character
(such as /boot/loaded instead of /boot/loader).
PR: kern/95625
Submitted by: Oliver Fromme <olli@secnetix.de>
MFC after: 1 month
+ Add boatloads of KASSERTs and *really* check out more locking
issues (to catch recursions when we actually go to real locking
in CAM soon). The KASSERTs also caught lots of other issues like
using commands that were put back on free lists, etc.
+ Target mode: role setting is derived directly from port capabilities.
There is no need to set a role any more. Some target mode resources
are allocated early on (ELS), but target command buffer allocation
is deferred until the first lun enable.
+ Fix some breakages I introduced with target mode in that some commands
are *repeating* commands. That is, the reply shows up but the command
isn't really done (we don't free it). We still need to take it off the
pending list because when we resubmit it, bad things then happen.
+ Fix more of the way that timed out commands and bus reset is done. The
actual TMF response code was being ignored.
+ For SPI, honor BIOS settings. This doesn't quite fix the problems we've
seen where we can't seem to (re)negotiate U320 on all drives but avoids
it instead by letting us honor the BIOS settings. I'm sure this is not
quite right and will have to change again soon.
controller to get ready (65K x ISA access time, visually around 1 second).
If we have wait more than that amount it's likely that the hardware is a
legacy-free one and simply doesn't have keyboard controller and doesn't
require enabling A20 at all.
This makes cdboot working for MacBook Pro with Boot Camp.
MFC after: 1 day
doesn't appear to be protecting anything. Most of consumers funsetownlst(9)
do not appear to be picking up Giant anywhere. This was originally a part
of my Giant exit(2) clean up revision 1.272 but I thought it was a good idea
to leave it out until we were able to analyze it better.
Tested by: kris
MFC after: 3 weeks
which means that devices will be destroyed on last close.
This fixes destruction order problems when, eg. RAID3 array is build on
top of RAID1 arrays.
Requested, reviewed and tested by: ru
MFC after: 2 weeks
o Implement the remove verb to remove a partition entry.
o Improve error reporting by first checking that the verb is valid.
o Add an entry parameter to the add verb. this parameter can be
both read-only as welll as read-write and specifies the entry
number of the newly added partition.
o Make sure that the provider is alive when passed to us. It may
be withering away.
o When adding a new partition entry, test for overlaps with existing
partitions.
particular provider. Use this function where g_orphan_provider()
is being called so that the flags are updated correctly and
g_orphan_provider() is called only when allowed.
Radeon memmap code, which with a new DDX driver and DRI drivers should fix
long-term stability issues with Radeons. Also adds support for r200's
ATI_fragment_shader, r300 texrect support and texture caching fixes, i915
vblank support and bugfixes, and new PCI IDs.
net.inet.ipsec.test_replay - When set to 1, IPsec will send packets with
the same sequence number. This allows to verify if the other side
has proper replay attacks detection.
net.inet.ipsec.test_integrity - When set 1, IPsec will send packets with
corrupted HMAC. This allows to verify if the other side properly
detects modified packets.
I used the first one to discover that we don't have proper replay attacks
detection in ESP (in fast_ipsec(4)).
natm_usr_detach(), which actually does the right thing. This code has
never worked properly, but also was never invoked since we only abort
connections associated with listen sockets, and netnam doesn't support
listen sockets.
MFC after: 3 months
reference. For now, we allow the possibility that the in_ppcb
pointer in the inpcb may be NULL if a timewait socket has had its
tcptw structure recycled. This allows tcp_timewait() to
consistently unlock the inpcb.
Reported by: Kazuaki Oda <kaakun at highway dot ne dot jp>
MFC after: 3 months
as being undocumented in Stevens, and was broken in 1997 during network
stack infrastructure work. It is the one remaining (and incorrect)
direct protocol reference to raw_usrreq.pru_attach; this is incorrect
because the raw socket code assumes that raw_uattach is called only after
the protocol has allocated a PCB.
MFC after: 3 months
protocols invoke after allocating a PCB, so so_pcb should be non-NULL.
It is only used by the two IPSEC implementations, so I didn't hit it in
my testing.
Reported by: pjd
MFC after: 3 months
The real problem was that ioctl handlers needed to call amr_wait_command()
with the list lock held. This not only solves the completion race, it also
prevents bounce buffer corruption that could arise from amr_start() being
called without the proper locks held.
Discussed with: ps
MFC After: 3 days
the completion of the command can occur before tsleep is called and
the command ends up blocking forever since the wakeup has already
been called.
Submitted by: ups
error on the request. Add a wrapper, gctl_set_param_err(), that
sets the error on the request from the error returned by
gctl_set_param() and update current callers of gctl_set_param()
to call gctl_set_param_err() instead.
This makes gctl_set_param() much more usable in situations where
the caller knows better what to do with certain (apparent) error
conditions and setting an error on the request is not one of the
things that need to be done.
credential: mac_associate_nfsd_label()
This entry point can be utilized by various Mandatory Access Control policies
so they can properly initialize the label of files which get created
as a result of an NFS operation. This work will be useful for fixing kernel
panics associated with accessing un-initialized or invalid vnode labels.
The implementation of these entry points will come shortly.
Obtained from: TrustedBSD
Requested by: mdodd
MFC after: 3 weeks
(tcp_sack_output_debug checks cached hints aginst computed values by walking the
scoreboard and reports discrepancies). The sack hinting code has been stable for
many months now so it is time for the debug code to go. Leaving tcp_sack_output_debug
ifdef'ed out in case we need to resurrect it at a later point.
earlier in cpu_setregs().
- If we know this CPU has a FPU via cpuid, then just assume the INT16
interface and make the npx device quiet to not clutter the dmesg. This
is true for all Pentium and later CPUs and even some of the later 486dx
CPUs.
Reviewed by: bde
Tested by: ps
MFC after: 1 week
new chips and improves support for already supported ones.
Some details, important for future merges:
- if_em.c merged manually, viewing diff between new vendor
driver and previous one.
- if_em_hw.h dropped in from vendor, and then restored revisions
1.16, 1.17, 1.18.
- if_em_hw.c dropped in from vendor, and then two liner change made,
that restores support for two rare chips.
the wire. This increases the speed considerably. Start to put
infrastructure in place to do RX side, but that requires more study
before it can be done.
so that we only have to do an ioapic_write() instead of an ioapic_read()
followed by an ioapic_write() every time we mask and unmask level triggered
interrupts. This cuts the execution time for these operations roughly in
half.
Profiled by: Paolo Pisati <p.pisati@oltrelinux.com>
MFC after: 1 week
tcp_timewait(). This corrects a bug (or lack of fixing of a bug)
in tcp_input.c:1.295.
Submitted by: Kazuaki Oda <kaakun at highway dot ne dot jp>
MFC after: 3 months
