This allocator uses a binary buddy system with a twist. First and
foremost, this allocator is required to support the implementation of
superpages. As a side effect, it enables a more robust implementation
of contigmalloc(9). Moreover, this reimplementation of
contigmalloc(9) eliminates the acquisition of Giant by
contigmalloc(..., M_NOWAIT, ...).
The twist is that this allocator tries to reduce the number of TLB
misses incurred by accesses through a direct map to small, UMA-managed
objects and page table pages. Roughly speaking, the physical pages
that are allocated for such purposes are clustered together in the
physical address space. The performance benefits vary. In the most
extreme case, a uniprocessor kernel running on an Opteron, I measured
an 18% reduction in system time during a buildworld.
This allocator does not implement page coloring. The reason is that
superpages have much the same effect. The contiguous physical memory
allocation necessary for a superpage is inherently colored.
Finally, the one caveat is that this allocator does not effectively
support prezeroed pages. I hope this is temporary. On i386, this is
a slight pessimization. However, on amd64, the beneficial effects of
the direct-map optimization outweigh the ill effects. I speculate
that this is true in general of machines with a direct map.
Approved by: re
In particular:
- Add an explicative table for locking of struct vmmeter members
- Apply new rules for some of those members
- Remove some unuseful comments
Heavily reviewed by: alc, bde, jeff
Approved by: jeff (mentor)
Now, we assume no more sched_lock protection for some of them and use the
distribuited loads method for vmmeter (distribuited through CPUs).
Reviewed by: alc, bde
Approved by: jeff (mentor)
Probabilly, a general approach is not the better solution here, so we should
solve the sched_lock protection problems separately.
Requested by: alc
Approved by: jeff (mentor)
vmcnts. This can be used to abstract away pcpu details but also changes
to use atomics for all counters now. This means sched lock is no longer
responsible for protecting counts in the switch routines.
Contributed by: Attilio Rao <attilio@FreeBSD.org>
causing a crash.
Suppose that we have two objects, obj and backing_obj, where
backing_obj is obj's backing object. Further, suppose that
backing_obj has a reference count of two. One being the reference
held by obj and the other by a map entry. Now, suppose that the map
entry is deallocated and its reference removed by
vm_object_deallocate(). vm_object_deallocate() recognizes that the
only remaining reference is from a shadow object, obj, and calls
vm_object_collapse() on obj. vm_object_collapse() executes
if (backing_object->ref_count == 1) {
/*
* If there is exactly one reference to the backing
* object, we can collapse it into the parent.
*/
vm_object_backing_scan(object, OBSC_COLLAPSE_WAIT);
vm_object_backing_scan(OBSC_COLLAPSE_WAIT) executes
if (op & OBSC_COLLAPSE_WAIT) {
vm_object_set_flag(backing_object, OBJ_DEAD);
}
Finally, suppose that either vm_object_backing_scan() or
vm_object_collapse() sleeps releasing its locks. At this instant,
another thread executes vm_object_split(). It crashes in
vm_object_reference_locked() on the assertion that the object is not
dead. If, however, assertions are not enabled, it crashes much later,
after the object has been recycled, in vm_object_deallocate() because
the shadow count and shadow list are inconsistent.
Reviewed by: tegge
Reported by: jhb
MFC after: 1 week
immediately flag any page that is allocated to a OBJT_PHYS object as
unmanaged in vm_page_alloc() rather than waiting for a later call to
vm_page_unmanage(). This allows for the elimination of some uses of
the page queues lock.
Change the type of the kernel and kmem objects from OBJT_DEFAULT to
OBJT_PHYS. This allows us to take advantage of the above change to
simplify the allocation of unmanaged pages in kmem_alloc() and
kmem_malloc().
Remove vm_page_unmanage(). It is no longer used.
page queues-synchronized flag. Reduce the scope of the page queues lock in
vm_fault() accordingly.
Move vm_fault()'s call to vm_object_set_writeable_dirty() outside of the
scope of the page queues lock. Reviewed by: tegge
Additionally, eliminate an unnecessary dereference in computing the
argument that is passed to vm_object_set_writeable_dirty().
synchronized by the lock on the object containing the page.
Transition PG_WANTED and PG_SWAPINPROG to use the new field,
eliminating the need for holding the page queues lock when setting
or clearing these flags. Rename PG_WANTED and PG_SWAPINPROG to
VPO_WANTED and VPO_SWAPINPROG, respectively.
Eliminate the assertion that the page queues lock is held in
vm_page_io_finish().
Eliminate the acquisition and release of the page queues lock
around calls to vm_page_io_finish() in kern_sendfile() and
vfs_unbusy_pages().
Originally, I had adopted sparc64's name, pmap_clear_write(), for the
function that is now pmap_remove_write(). However, this function is more
like pmap_remove_all() than like pmap_clear_modify() or
pmap_clear_reference(), hence, the name change.
The higher-level rationale behind this change is described in
src/sys/amd64/amd64/pmap.c revision 1.567. The short version is that I'm
trying to clean up and fix our support for execute access.
Reviewed by: marcel@ (ia64)
pointer: When vm_object_deallocate() sleeps because of a non-zero
paging in progress count on either object or object's shadow,
vm_object_deallocate() must ensure that object is still the shadow's
backing object when it reawakens. In fact, object may have been
deallocated while vm_object_deallocate() slept. If so, reacquiring
the lock on object can lead to a deadlock.
Submitted by: ups@
MFC after: 3 weeks
be called without any vnode locks held. Remove calls to vn_start_write() and
vn_finished_write() in vnode_pager_putpages() and add these calls before the
vnode lock is obtained to most of the callers that don't already have them.
object that requires Giant in vm_object_deallocate(). This is somewhat
hairy in that if we can't obtain Giant directly, we have to drop the
object lock, then lock Giant, then relock the object lock and verify that
we still need Giant. If we don't (because the object changed to OBJT_DEAD
for example), then we drop Giant before continuing.
Reviewed by: alc
Tested by: kris
the resident page count matches the object size. We know it fully backs
its parent in this case.
Reviewed by: acl, tegge
Sponsored by: Isilon Systems, Inc.
- provide an interface (macros) to the page coloring part of the VM system,
this allows to try different coloring algorithms without the need to
touch every file [1]
- make the page queue tuning values readable: sysctl vm.stats.pagequeue
- autotuning of the page coloring values based upon the cache size instead
of options in the kernel config (disabling of the page coloring as a
kernel option is still possible)
MD changes:
- detection of the cache size: only IA32 and AMD64 (untested) contains
cache size detection code, every other arch just comes with a dummy
function (this results in the use of default values like it was the
case without the autotuning of the page coloring)
- print some more info on Intel CPU's (like we do on AMD and Transmeta
CPU's)
Note to AMD owners (IA32 and AMD64): please run "sysctl vm.stats.pagequeue"
and report if the cache* values are zero (= bug in the cache detection code)
or not.
Based upon work by: Chad David <davidc@acns.ab.ca> [1]
Reviewed by: alc, arch (in 2004)
Discussed with: alc, Chad David, arch (in 2004)
vm_object_backing_scan() was not written to handle. Specifically, a wired
page within a backing object that is shadowed by a page within the shadow
object. Handle this state by removing the wired page from the backing
object. The wired page will be freed by socow_iodone().
Stop masking errors: If a page is being freed by vm_object_backing_scan(),
assert that it is no longer mapped rather than quietly destroying any
mappings.
Tested by: Harald Schmalzbauer
due to the vm object being locked.
When a process writes large amounts of data to a file, the vm object associated
with that file can contain most of the physical pages on the machine. If the
process is preempted while holding the lock on the vm object, pagedaemon would
be able to move very few pages from PQ_INACTIVE to PQ_CACHE or from PQ_ACTIVE
to PQ_INACTIVE, resulting in unlimited cleaning of dirty pages belonging to
other vm objects.
Temporarily unlock the page queues lock while locking vm objects to avoid lock
order violation. Detect and handle relevant page queue changes.
This change depends on both the lock portion of struct vm_object and normal
struct vm_page being type stable.
Reviewed by: alc
underlying vnode requires Giant.
- In vm_fault only acquire Giant if the underlying object has NEEDSGIANT
set.
- In vm_object_shadow inherit the NEEDSGIANT flag from the backing object.
queues lock in vm_object_backing_scan(). Updates to the page's PG_BUSY
flag and busy field are synchronized by the containing object's lock.
Testing the page's hold_count and wire_count in vm_object_backing_scan()'s
OBSC_COLLAPSE_NOWAIT case is unnecessary. There is no reason why the held
or wired pages cannot be migrated to the shadow object.
Reviewed by: tegge
- Use VFS_LOCK_GIANT() rather than directly acquiring giant in places
where giant is only held because vfs requires it.
Sponsored By: Isilon Systems, Inc.
and BBO is BO's backing object. Now, suppose that O and BO are being
collapsed. Furthermore, suppose that BO has been marked dead
(OBJ_DEAD) by vm_object_backing_scan() and that either
vm_object_backing_scan() has been forced to sleep due to encountering
a busy page or vm_object_collapse() has been forced to sleep due to
memory allocation in the swap pager. If vm_object_deallocate() is
then called on BBO and BO is BBO's only shadow object,
vm_object_deallocate() will collapse BO and BBO. In doing so, it adds
a necessary temporary reference to BO. If this collapse also sleeps
and the prior collapse resumes first, the temporary reference will
cause vm_object_collapse to panic with the message "backing_object %p
was somehow re-referenced during collapse!"
Resolve this race by changing vm_object_deallocate() such that it
doesn't collapse BO and BBO if BO is marked dead. Once O and BO are
collapsed, vm_object_collapse() will attempt to collapse O and BBO.
So, vm_object_deallocate() on BBO need do nothing.
Reported by: Peter Holm on 20050107
URL: http://www.holm.cc/stress/log/cons102.html
In collaboration with: tegge@
Candidate for RELENG_4 and RELENG_5
MFC after: 2 weeks
I'm not sure why a credential was added to these in the first place, it is
not used anywhere and it doesn't make much sense:
The credentials for syncing a file (ability to write to the
file) should be checked at the system call level.
Credentials for syncing one or more filesystems ("none")
should be checked at the system call level as well.
If the filesystem implementation needs a particular credential
to carry out the syncing it would logically have to the
cached mount credential, or a credential cached along with
any delayed write data.
Discussed with: rwatson
because this call is only needed to wake threads that slept when they
discovered a dead object connected to a vnode. To eliminate unnecessary
calls to wakeup() by vnode_pager_dealloc(), introduce a new flag,
OBJ_DISCONNECTWNT.
Reviewed by: tegge@
need for most calls to vm_page_busy(). Specifically, most calls to
vm_page_busy() occur immediately prior to a call to vm_page_remove().
In such cases, the containing vm object is locked across both calls.
Consequently, the setting of the vm page's PG_BUSY flag is not even
visible to other threads that are following the synchronization
protocol.
This change (1) eliminates the calls to vm_page_busy() that
immediately precede a call to vm_page_remove() or functions, such as
vm_page_free() and vm_page_rename(), that call it and (2) relaxes the
requirement in vm_page_remove() that the vm page's PG_BUSY flag is
set. Now, the vm page's PG_BUSY flag is set only when the vm object
lock is released while the vm page is still in transition. Typically,
this is when it is undergoing I/O.
