urce is a bookmark
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Albert Lee <trisk@nexenta.com>
illumos/illumos-gate@643da460c8
- Document the kern_kevent_anonymous() function.
- Add assertions to ensure that we don't silently leave the kqueue
linked from a file descriptor table.
Reviewed by: jmg
Differential Revision: https://reviews.freebsd.org/D3364
There is still one TODO item for these calls: add file descriptor
passing. The data structures are already prepared for this. It's just
the translation that's missing.
Obtained from: http://github.com/NuxiNL/freebsd
given the hardware name.
The ti,hwmods property is used (among other things) to associate an fdt node
with a specific instance of some hardware. For example given a device node
that contains the property ti,hwmods = "timer3", if you call this passing
"timer" as the hwmod string to look for it would return 3.
illumos/illumos-gate@70163ac57ehttps://www.illumos.org/issues/5695
In dmu_sync_ready(), a hole block pointer will have it's logical size
explicitly set as it's necessary for replay purposes. To "undo" this,
dmu_sync_done() will zero out any hole that it finds. This becomes a
problem when using the "hole_birth" feature, as this will also wipe out
any birth time that might have happened to be set on the hole.
...
As a fix, the logic to zero out a hole is only applied to old style
holes with a birth time of zero. Holes created with the "hole_birth"
feature enabled will have a non-zero birth time, and will be skipped
(thus preserving the ltime, type, and level information as well).
In addition, zdb was updated to also print the ltime, type, and level
information for these new style holes. Previously, only the logical
birth time would be printed.
Author: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
changes to prevent the 'rescue: not found' errors from happening.
Bump FreeBSD_version to 1100078 since there's been no version bumps
since this change was made. Only people that installed since r284356
really need to do this bootstrapping, but since crunchgen needs to
bootstrap for other reasons, bumping the number was the simplest.
We already properly return ENOTDIR when calling *at() on a non-directory
vnode, but it turns out that if you call it on a socket, we see EINVAL.
Patch up namei to properly translate this to ENOTDIR.
frame buffers and memory mapped UARTs.
1. Delay calling cninit() until after pmap_bootstrap(). This makes
sure we have PMAP initialized enough to add translations. Keep
kdb_init() after cninit() so that we have console when we need
to break into the debugger on boot.
2. Unfortunately, the ATPIC code had be moved as well so as to
avoid a spurious trap #30. The reason for which is not known
at this time.
3. In pmap_mapdev_attr(), when we need to map a device prior to the
VM system being initialized, use virtual_avail as the KVA to map
the device at. In particular, avoid using the direct map on amd64
because we can't demote by virtue of not being able to allocate
yet. Keep track of the translation.
Re-use the translation after the VM has been initialized to not
waste KVA and to satisfy the assumption in uart(4) that the handle
returned for the low-level console is the same as later returned
when the device is probed and attached.
4. In pmap_unmapdev() remove the mapping from the table when called
pre-init. Otherwise keep the mapping. During bus probe and attach
device resources are mapped and unmapped multiple times, which
would have us destroy the mapping used by the low-level console.
5. In pmap_init(), set pmap_initialized to signal that we're not
pre-init anymore. On amd64, bring the direct map in sync with the
translations created at that time.
6. Implement bus_space_map() and bus_space_unmap() for real: when
the tag corresponds to memory space, call the corresponding
pmap_mapdev() and pmap_unmapdev() functions to construct and
actual handle.
7. In efifb.c and vt_vga.c, remove the crutches and hacks and simply
call pmap_mapdev_attr() or bus_space_map() as desired.
Notes:
1. uart(4) already used bus_space_map() during low-level console
setup but since serial ports have traditionally been I/O port
based, the lack of a proper implementation for said function
was not a problem. It has always supported memory mapped UARTs
for low-level consoles by setting hw.uart.console accordingly.
2. The use of the direct map on amd64 without setting caching
attributes has been a bigger problem than previously thought.
This change has the fortunate (and unexpected) side-effect of
fixing various EFI frame buffer problems (though not all).
PR: 191564, 194952
Special thanks to:
1. XipLink, Inc -- generously donated an Intel Bay Trail E3800
based eval board (ADLE3800PC).
2. The FreeBSD Foundation, in particular emaste@ -- for UEFI
support in general and testing.
3. Everyone who tested the proposed for PR 191564.
4. jhb@ and kib@ for being a soundboard and applying a clue bat
if so needed.
As CloudABI processes cannot adjust their signal handlers, we need to
make sure that we start up CloudABI processes with consistent signal
masks. Though the POSIx standard signal behavior is all right, we do
need to make sure that we ignore SIGPIPE, as it would otherwise be
hard to interact with pipes and sockets.
Extend execsigs() to iterate over ps_sigignore and call sigdflt() for
each of the ignored signals.
Reviewed by: kib
Obtained from: https://github.com/NuxiNL/freebsd
Differential Revision: https://reviews.freebsd.org/D3365
The cloudlibc pdwait() function ends up using FreeBSD's kqueue() in
combination with EVFILT_PROCDESC. This depends on CAP_EVENT -- not
CAP_PDWAIT.
Obtained from: https://github.com/NuxiNL/freebsd
single ICR MSR write. This is in contrast with the xAPIC mode, where
we must read current ICR value, do bit fiddling and perform two 32-bit
register writes. As a consequence, there is no need to disable
interrupts around ICR value calculation and write.
Note that typical users of ipi_raw() and ipi_vectored() take spinlock,
which already disables interrupts. For them, the change removes
unneeded CLI and POPFL/Q instructions.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
data is synchronized by store/load to the variable. The
lapic_write_icr() function ensures that store buffers are flushed
before IPI command is issued.
Discussed with: bde
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
the SMP structures, synchronized with the load by release store in
release_aps().
The change is formal, x86 strong memory model implicitely provided
the guarantees.
Discussed with: bde
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Blocking on locks and condition variables can be accomplished by polling
and using the special filters CONDVAR, LOCK_RDLOCK and LOCK_WRLOCK.
For now it wouldn't make sense to implement this functionality into
kqueue() itself, for the reason that they are CloudABI specific and
would require us to resize 'struct kevent' to hold all of the parameters
of interest.
Add a bandaid to the CloudABI poll system call to call into the futex
code directly if it detects specific combinations of events that are
used by the C library.
Obtained from: https://github.com/NuxiNL/freebsd
This change implements two functions, cloudabi64_kevent_copyin() and
cloudabi64_kevent_copyout(), that convert CloudABI structures to
FreeBSD's struct kevent. CloudABI uses two structures: subscription_t
and event_t. The former is used for input, whereas the latter is used
for output. Unlike struct kevent, fields aren't overloaded for multiple
purposes or for separate event types.
For poll() we call into the newly introduced kern_kevent_anonymous()
function that allows us to poll without a file descriptor. This function
is not only used by poll(), but also by functions such as
sleep() and clock_nanosleep().
Reviewed by: jmg
Obtained from: https://github.com/NuxiNL/freebsd
Differential Revision: https://reviews.freebsd.org/D3308
POSIX.1-2001 and removed from the specification in POSIX.1-2008.
New softwares shall use memcpy(3) or memmove(3).
Differential Revision: D3358
Reviewed by: wblock
Approved by: rodrigc
Sponsored by: gandi.net
users who uses only FreeBSD -CURRENT, and building these indexes are
only useful to those who share ports tree across different FreeBSD
releases, and system administrator with that need can always enable
this behavior.
MFC after: 2 weeks (only the principals, not actual change)
- the nvlist error is set, or
- the nvlist case ignore flag is not set and there is attend to
add element with duplicated name.
In both cases the nvlist_move_nvpair() function free nvpair structure.
If library will try to unpack a binary blob which contains duplicated
names it will end up with using memory after free.
To prevent that, the nvlist_move_nvpair() function interface is changed
to report about failure and checks are added to the nvpair_xunpack()
function.
Discovered thanks to the american fuzzy lop.
Approved by: pjd (mentor)
define GID_VIDEO in sys/conf.h, and use it together with UID_ROOT
to define DRM_DEV_UID and DRM_DEV_GID in the drmP.h files.
So there is one place where the UID's and GID's are defined.
Submitted by: ed@
Reviewed by: ed@, dumbbell@
Differential Revision: https://reviews.freebsd.org/D3360
They need to be built and installed (including headers) prior to the
DTrace CTF tools.
Reviewed by: imp (as part of a larger change)
Sponsored by: The FreeBSD Foundation
If CloudABI processes open files with a set of requested rights that do
not match any of the privileges granted by O_RDONLY, O_WRONLY or O_RDWR,
we'd better fall back to O_RDONLY -- not O_WRONLY.
CloudABI's polling system calls merge the concept of one-shot polling
(poll, select) and stateful polling (kqueue). They share the same data
structures.
Extend FreeBSD's kqueue to provide support for waiting for events on an
anonymous kqueue. Unlike stateful polling, there is no need to support
timeouts, as an additional timer event could be used instead.
Furthermore, it makes no sense to use a different number of input and
output kevents. Merge this into a single argument.
Obtained from: https://github.com/NuxiNL/freebsd
Differential Revision: https://reviews.freebsd.org/D3307
can be seen as the same as 0.2. There are changes with the data passed to
CPU_SUSPEND, however we don't yet use this call.
Sponsored by: ABT Systems Ltd
5376 arc_kmem_reap_now() should not result in clearing arc_no_grow
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@2ec99e3e98
