Currently the installer will tag geliboot partitions with both BOOT and
GELIBOOT; the former allows the kernel to taste it at boot, while the latter
is what loaders keys off of.
However, it seems reasonable to assume that if a provider's been tagged with
GELIBOOT that the kernel should also take that as a hint to taste/attach at
boot. This would allow us to stop tagging GELIBOOT partitions with BOOT in
bsdinstall, but I'm not sure that there's a compelling reason to do so any
time soon.
Reviewed by: oshogbo
Differential Revision: https://reviews.freebsd.org/D23387
For the moment, supress the operation not supported messages at this level. In
the fullness of time, we will have better error tracking so we can diagnose
issues in the future.
Reviewed by: scottl@
Since AVL already has embedded element counter, use dn_dbufs_count
only for dbufs not counted there (bonus buffers) and just add them.
This removes two atomics per dbuf life cycle.
According to profiler it reduces time spent by dbuf_destroy() inside
bottlenecked dbuf_evict_thread() from 13.36% to 9.20% of the core.
This counter is used only on illumos, so for FreeBSD it was just a
waste of time.
MFC after: 2 weeks
riscv cores.
GFE cores come with standard DTS file that lacks standard 'dmas ='
property, which means xae(4) could not find a DMA controller to use.
The 'dmas' property could not be added to the DTS file because the
ethernet controller and DMA engine parts in Linux are implemented
in a single driver.
Instead of 'dmas' property the standard Xilinx 'axistream-connected'
property is provided, so fallback to use it instead.
Suggested by: James Clarke <jrtc27@jrtc27.com>
Reviewed by: James Clarke <jrtc27@jrtc27.com>
Sponsored by: DARPA, AFRL
in the sysctl block for the driver. mpsutil/mprutil needs this so it can
know how big of a buffer to allocate when requesting the IOCFacts from the
controller. This eliminates the kernel console messages about wrong
allocation sizes.
Reported by: imp
BIO_READ and BIO_WRITE, we've handled this expanded syntax poorly in
drivers when the driver doesn't support a particular command. Do a
sweep and fix that.
Reported by: imp
This was relatively harmless but surprising to see in counters. The
race occurred when rd_seq was read after the goal was updated and we
incorrectly calculated the delta between them.
Reviewed by: rlibby
Differential Revision: https://reviews.freebsd.org/D23464
Recent network epoch changes have left some drivers unexpectedly broken
and there is not yet a consensus on the correct fix. This is patch is
a minor performance impact until we can agree on the correct path
forward.
Reviewed by: core, network, imp, glebius, hselasky
Differential Revision: https://reviews.freebsd.org/D23515
Previous code used 4 atomics to do aggsum_flush_bucket() and 2 more to
re-borrow after the flush. But since asc_borrowed and asc_delta are
accessed only while holding asc_lock, it makes no any sense to modify
as_lower_bound and as_upper_bound in multiple steps. Instead of that
the new code uses only 2 atomics in all the cases, one per as_*_bound
variable. I think even that is overkill, simple atomic store and
load could be used here, since all modifications are done under the
as_lock, but there are no such primitives in ZFS code now.
While there, make borrow code consider previous borrow value, so that
on mixed request patterns reduce chance of needing to borrow again if
much larger request follows tiny one that needed borrow.
Also reduce as_numbuckets from uint64_t to u_int. It makes no sense
to use so large division operation on every aggsum_add().
Reviewed by: Brian Behlendorf, Paul Dagnelie
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
counters. In my stress test there is only one poll for every 15,000
frees. This means we are effectively amortizing the cache coherency
overhead even with very high write rates (3M/s/core).
Reviewed by: markj, rlibby
Differential Revision: https://reviews.freebsd.org/D23463
Always use the kdb_thr_ctx() for db_trace_thread() as on other
architectures. Initialize pcb_ra to be the sepc from the saved
trapframe rather than the saved ra to avoid skipping a frame.
Reviewed by: mhorne, br
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23513
While here, add an extra line of information for exceptions and
interrupts and compress the per-frame line down to one line to match
other architectures.
Reviewed by: mhorne, br
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23508
Currently the Xen console is always attached with priority CN_REMOTE
(highest), which means that when booting with a single console the Xen
console will take preference over the VGA for example, and that's not
intended unless the user has also selected to use a serial console.
Fix this by lowering the priority of the Xen console to NORMAL unless
the user has selected to use a serial console. This keeps the usual
FreeBSD behavior of outputting to the internal consoles (ie: VGA) when
booted as a Xen dom0.
MFC after: 3 days
Sponsored by: Citrix Systems R&D
This change adds a new libkvm function, kvm_kerndisp(), that can be used to
retrieve the kernel displacement, that is the difference between the kernel's
base virtual address at run time and the kernel base virtual address specified
in the kernel image file.
This will be used by kgdb, to properly relocate kernel symbols, when needed.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D23285
Add CTLFLAG_NEEDGIANT flag (modelled after D_NEEDGIANT) that will be used to
mark sysctls that still require locking Giant.
Rewrite sysctl_handle_string() to use internal locking instead of locking
Giant.
Mark SYSCTL_STRING, SYSCTL_OPAQUE and their variants as MPSAFE.
Add infrastructure support for enforcing proper use of CTLFLAG_NEEDGIANT
and CTLFLAG_MPSAFE flags with SYSCTL_PROC and SYSCTL_NODE, not enabled yet.
Reviewed by: kib (mentor)
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23378
UMA_ZFLAG_CACHEONLY was essentially the same thing as UMA_ZONE_VM, but
with a more confusing name. Remove the flag, make UMA_ZONE_VM an
inherit flag, and replace all references.
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23516
We somewhat blindly copy the srr1 from the new context to the trap frame,
but disable FPU and VSX unconditionally, relying on the trap to re-enable
them. This works because the FPU manages the VSX extended FP registers,
which is governed by the PCB_FPFREGS flag. However, with altivec, we
would blindly disable PSL_VEC, without touching PCB_VEC. Handle this case
by disabling altivec in both srr1 and pcb_flags, if the mcontext doesn't
have _MC_AV_VALID set.
Reported by: pkubaj
This means that extra virtual interfaces (VIs) created with
hw.cxgbe.num_vis are no longer required to use netmap. Use this
tunable to enable native netmap support on the main interface:
hw.cxgbe.native_netmap="3"
There is no change in default behavior.
Suggested by: jch@
MFC after: 2 weeks
Sponsored by: Chelsio Communications
In legacy VirtIO drivers, the header must be PCI endianness (little) and the
device-specific region is encoded in the native endian of the guest.
This patch makes the access (read/write) to VirtIO header using the little
endian order. Other read and write access are native endianness. This also
sets the device's IO region as big endian if on big endian machine.
PR: 205178
Submitted by: Andre Silva <afscoelho@gmail.com>
Reported by: Kenneth Salerno <kennethsalerno@yahoo.com>
Reviewed by: bryanv, bdragon, luporl, alfredo
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D23401
While cause codes higher than 16 are reserved, the exception code
field of the register is defined to be all bits but the upper-most
bit.
Reviewed by: mhorne
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23510
While here, remove a local variable to avoid the CSR read in non-debug
kernels.
Reviewed by: mhorne
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23511
In practice this discarded all characters entered at the DDB prompt.
Reviewed by: br
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23509
This fixes continuing from debug.kdb.enter=1 after enabling the use of
compressed instructions since the compiler can emit the two byte
c.ebreak instead of the 4 byte ebreak.
Reviewed by: br
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23507
I believe this is left over from when dtrace was being ported and
developed out-of-tree. Now it just ensures that dtrace.ko and a non-SMP
kernel have incompatible KBIs.
PR: 243711
Sponsored by: The FreeBSD Foundation
This reverts r177661. The change is no longer very useful since
out-of-tree KLDs will be built to target SMP kernels anyway. Moveover
it breaks the KBI in !SMP builds since cpuset_t's layout depends on the
value of MAXCPU, and several kernel interfaces, notably
smp_rendezvous_cpus(), take a cpuset_t as a parameter.
PR: 243711
Reviewed by: jhb, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23512
Submitted by: Bora Özarslan <borako.ozarslan@gmail.com>
Submitted by: Yang Wang <2333@outlook.jp>
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19917
sendfile(2) optionally takes a set of headers that get prepended to the
file data. If the request length is less than that of the headers,
sendfile may not allocate an sfio structure, in which case its pointer
is null and we should be careful not to dereference. This was
introduced in r356902.
Reported by: syzkaller
Sponsored by: The FreeBSD Foundation
This change adds 2 new SYSCTLs, to retrieve the original and relocated KERNBASE
values. This provides an easy, architecture independent way to calculate the
running kernel displacement (current/load address minus original base address).
The initial goal for this change is to add a new libkvm function that returns
the kernel displacement, both for live kernels and crashdumps. This would in
turn be used by kgdb to find out how to relocate kernel symbols (if needed).
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D23284
The cong_drop setting will apply to queues created after the setting is
changed and not to existing queues.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Add a switch to allow disabling multipage slabs, in order to facilitate
measuring memory usage and performance effects. The tunable
vm.debug.uma_multipage_slabs defaults to 1 and can be set to 0 to
disable. The name may change soon.
Reviewed by: markj (previous version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23487
Memory efficiency can be poor with awkward item sizes (e.g. 1/2 or 1
page size + epsilon). In order to achieve a minimum memory efficiency,
select a slab size with a potentially larger number of pages if it
yields a lower portion of waste.
This may mean using page_alloc instead of uma_small_alloc, which could
be more costly.
Discussed with: jeff, mckusick
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23239
Remove mbuf_jumbo_alloc and let large mbuf zones use the new uma default
contig allocator (a copy of mbuf_jumbo_alloc). Tag other zones which
require contiguous objects, even if they don't use the new default
contig allocator, so that uma knows about their constraints.
Reviewed by: jeff, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23238
