It used to be mapped at the top of the UVA.
If the randomization is enabled any address above .data section will be
randomly chosen and a guard page will be inserted in the shared page
default location.
The shared page is now mapped in exec_map_stack, instead of
exec_new_vmspace. The latter function is called before image activator
has a chance to parse ASLR related flags.
The KERN_PROC_VM_LAYOUT sysctl was extended to provide shared page
address.
The feature is enabled by default for 64 bit applications on all
architectures.
It can be toggled kern.elf64.aslr.shared_page sysctl.
Approved by: mw(mentor)
Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D35349
Merge commit 1737d8397a0 by Brooks Davis:
time() is declared in time.h
This fixes a -Werror warning from clang 15:
tests/sys/cddl/zfs/bin/readmmap.c:97:9: error: call to undeclared function 'time'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
Obtained from: https://github.com/CTSRD-CHERI/cheribsd/commit/1737d8397a0
MFC after: 3 days
Teach pft_ether.py to send a range of packet sizes. Use this to move the
size sweep into Python, removing the repeated Python startup overhead
and greatly speeding up the pf.ether.short_pkt test.
This should fix test timeouts seen on ci.freebsd.org.
While here also extend the range of packet sizes tested, because it adds
very little runtime now.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Currently, processing of IPv6 local traffic is partially broken:
link-local connection fails and global unicast connect() takes
3 seconds to complete.
This happens due to the combination of multiple factors.
IPv6 code passes original interface "origifp" when passing
traffic via loopack to retain the scope that is mandatory for the
correct hadling of link-local traffic. First problem is that the logic
of passing source interface is not working correcly for TCP connections,
resulting in passing "origifp" on the first 2 connection attempts and
lo0 on the subsequent ones. Second problem is that source address
validation logic skips its checks iff the source interface is loopback,
which doesn't cover "origifp" case.
More detailed description is available at https://reviews.freebsd.org/D35732
Fix the first problem by untangling&simplifying ifp/origifp logic.
Fix the second problem by switching source address validation check to
using M_LOOP mbuf flag instead of interface type.
PR: 265089
Reviewed by: ae, bz(previous version)
Differential Revision: https://reviews.freebsd.org/D35732
MFC after: 2 weeks
Currently selectroute() contains two nearly-identical versions of
the route lookup logic - one for original destination and another
for the case when IPV6_NEXTHOP option was set on the socket.
Factor out handling these route lookups in a separation function to
improve readability.
This change also fixes handling of link-local IPV6_NEXTHOPs.
Differential Revision: https://reviews.freebsd.org/D35710
MFC after: 2 weeks
Notable amount of tests related to the packet IO require two VNET jails
for proper testing and avoiding side effects for the host system.
Additionally, it is often required to run actions in the jails seme-sequentially
- waiting for the listener initialisation can be an example of such
dependency.
This change extends pytest vnet framework to allow defining multi-vnet
multi-epair topologies in declarative style, without any need to bother
about jail or repair names. All jail creation/teardown, interface
creation/teardown and address assignments are handled automatically.
Example:
TOPOLOGY = {
"vnet1": {"ifaces": ["if1", "if2", "if3"]},
"vnet2": {"ifaces": ["if1", "if2", "if3"]},
"if1": {"prefixes6": [("2001:db8:a::1/64", "2001:db8:a::2/64")]},
"if2": {"prefixes6": [("2001:db8:b::1/64", "2001:db8:b::2/64")]},
"if3": {"prefixes6": [("2001:db8:c::1/64", "2001:db8:c::2/64")]},
}
def vnet2_handler(self, vnet, obj_map, pipe):
ss = VerboseSocketServer("::", self.DEFAULT_PORT)
pipe.send("READY")
def test_output6_base(self):
self.wait_object(second_vnet.pipe)
The definitions above will create 2 vnets ("jail_test_output6_base",
"jail_test_output6_base_2"), 3 epairs, attached to both first and
second jails, set up the IP addresses for each epair, spawn another
process for vnet2_handler and pass control to vnet2_handler and
test_output6_base. Both processes can pass objects between each
other using pre-created pipes.
Differential Revision: https://reviews.freebsd.org/D35708
If we receive a UDP packet (directed towards an active OpenVPN socket)
which is too short to contain an OpenVPN header ('struct
ovpn_wire_header') we wound up making m_copydata() read outside the
mbuf, and panicking the machine.
Explicitly check that the packet is long enough to copy the data we're
interested in. If it's not we will pass the packet to userspace, just
like we'd do for an unknown peer.
Extend a test case to provoke this situation.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Do not panic if we try to dummynet an Ethernet packet that's not IPv4 or
IPv6. Simply give it to dummynet.
Sponsored by: Rubicon Communications, LLC ("Netgate")
OpenVPN uses IPv4-mapped IPv6 addresses by default (if we don't specify
'proto udp4', or an IPv4 address to bind to). Test that this works.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Instead of returning EMSGSIZE pass the error code from fdallocn() directly
to userland. That would be EMFILE, which makes much more sense. This
error code is not listed in the specification[1], but the specification
doesn't cover such edge case at all. Meanwhile the specification lists
EMSGSIZE as the error code for invalid value of msg_iovlen, and FreeBSD
follows that, see sys_recmsg(). Differentiating these two cases will make
a developer/admin life much easier when debugging.
[1] https://pubs.opengroup.org/onlinepubs/9699919799/functions/recvmsg.html
Reviewed by: markj
Differential revision: https://reviews.freebsd.org/D35640
This change is a continuation of 9c42645a1e workaround.
Apparently pytest argument parser is not happy when parsing values
with spaces or just more than one --atf-var argument.
Switch wrapper to send these kv pairs as env variables. Specifically,
use _ATF_VAR_key=value format to distinguish from the other vars.
Add the `atf_vars` fixture returning all passed kv pairs as a dict.
Reviewed by: lwhsu
Differential Revision: https://reviews.freebsd.org/D35625
MFC after: 2 weeks
OpenVPN allows us to push routes for client networks with the 'iroute'
directive. Test that this works as expected.
Sponsored by: Rubicon Communications, LLC ("Netgate")
In client mode (i.e. if there's only one peer) we should be able to
route to the correct peer even if the routing table is incorrect.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Test that openvpn (DCO) clients are notified and handle timeout events.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D35091
Set up an OpenVPN tunnel between two jails, send traffic through them to
confirm basic function.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D35067
Test sending very short packets (i.e. too short for an IP header)
packets in the Ethernet filtering code.
Sponsored by: Rubicon Communications, LLC ("Netgate")
We now allow new bridge members to be added with a different MTU from
the bridge. We change the interface MTU to match the bridge.
Test this.
PR: 264883
Move pytest wrapper to the collection of the other atf wrappers
in libexec. It solves the problem of combining bits & pieces from
bsd.test.mk and bgs.prog.mk to address "test binary, but not the
suite binary".
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D35604
MFC after: 2 weeks
Implementation consists of the pytest plugin implementing ATF format and
a simple C++ wrapper, which reorders the provided arguments from ATF format
to the format understandable by pytest. Each test has this wrapper specified
after the shebang. When kyua executes the test, wrapper calls pytest, which
loads atf plugin, does the work and returns the result. Additionally, a
separate python "package", `/usr/tests/atf_python` has been added to collect
code that may be useful across different tests.
Current limitations:
* Opaque metadata passing via X-Name properties. Require some fixtures to write
* `-s srcdir` parameter passed by the runner is ignored.
* No `atf-c-api(3)` or similar - relying on pytest framework & existing python libraries
* No support for `atf_tc_<get|has>_config_var()` & `atf_tc_set_md_var()`.
Can be probably implemented with env variables & autoload fixtures
Differential Revision: https://reviews.freebsd.org/D31084
Reviewed by: kp, ngie
Most test pass identically on different kinds of sockets. However,
few edge cases work differently on stream and datagram sockets. We
want to exercise this and document.
Differential revision: https://reviews.freebsd.org/D35420
A one-to-many unix/dgram socket is a socket that has been bound
with bind(2) and can get multiple connections. A typical example
is /var/run/log bound by syslogd(8) and receiving multiple
connections from libc syslog(3) API. Until now all of these
connections shared the same receive socket buffer of the bound
socket. This made the socket vulnerable to overflow attack.
See 240d5a9b1c for a historical attempt to workaround the problem.
This commit creates a per-connection socket buffer for every single
connected socket and eliminates the problem. The new behavior will
optimize seldom writers over frequent writers. See added test case
scenarios and code comments for more detailed description of the
new behavior.
Reviewed by: markj
Differential revision: https://reviews.freebsd.org/D35303
Add tests for TCP_MD5 getsockopt for ipv6 and ipv4. These will only run
when the kernel module is loaded, but will be in place if further
regressions are found.
Reviewed by: rscheff
MFC after: 3 days
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35532
If ktls.require_ifnet is set to true, then check the TLS offload mode
for tests sending and receiving records and skip the test if the
offload mode is not ifnet mode.
This can be used along with ktls.host to run KTLS tests against a NIC
supporting ifnet TLS and verify that expected cipher suites and
directions used ifnet TLS rather than software TLS. Receive tests may
result in a false positive as receive ifnet TLS can use software as a
fallback.
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D35427
Previously ktls tests always executed over a local socket pair.
ktls.host can be set to a host to connect to with a single socket
instead. The remote end is expected to echo back any data received
(such as the echo service). The port can be set with ktls.port which
defaults to "echo".
This is primarily useful to permit testing NIC TLS offload use cases
where the traffic needs to transit the NIC.
Note that the variables must be set via
'kyua -v test_suites.FreeBSD.ktls.host=host'.
Reviewed by: markj
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D35426
Make it a complex, but a single for(;;) statement. The previous cycle
with some loop logic in the beginning and some loop logic at the end
was confusing. Both me and markj@ were misleaded to a conclusion that
some checks are unnecessary, while they actually were necessary.
While here, handle an edge case found by Mark, when on 64-bit platform
an incorrect message from userland would underflow length counter, but
return without any error. Provide a test case for such message.
Reviewed by: markj
Differential revision: https://reviews.freebsd.org/D35375
Test pfsync in a more realistic scenario with carp and route_to rules.
Build this topology and initiate a single ping session from client to
server:
┌──────┐
│client│
└───┬──┘
│
┌───┴───┐
│bridge0│
└┬─────┬┘
│ │
┌────────────────┴─┐ ┌─┴────────────────┐
│gw_route_to_master├─┤gw_route_to_backup│
└────────────────┬─┘ └─┬────────────────┘
│ │
┌┴─────┴┐
│bridge1│
└┬─────┬┘
│ │
┌────────────────┴─┐ ┌─┴────────────────┐
│gw_reply_to_master├─┤gw_reply_to_backup│
└────────────────┬─┘ └─┬────────────────┘
│ │
┌┴─────┴┐
│bridge2│
└───┬───┘
│
┌───┴──┐
│server│
└──────┘
gw* jails forward traffic through pf route-to rules, not fib lookups.
If backup_promotion arg is given (as in the pfsync_pbr test case), a
carp failover event occurs during the ping session on both gateways.
Verify that ping messages still go where we expect them to go.
MFC after: 2 weeks
Sponsored by: Orange Business Services
Put some data into a socket and check that:
o select(2) sees readable data
o kevent(2) sees data, and correctly sees data size
o ioctl(FIONREAD) sees correct size
o aio(4) successfully reads the data
Repeat the test twice for a connected socket and not-connected. With
future implementation these two cases would exercise different code.
We could insert proxy NDP entries by the ndp command, but the host
with proxy ndp entries had not responded to Neighbor Solicitations.
Change the following points for proxy NDP to work as expected:
* join solicited-node multicast addresses for proxy NDP entries
in order to receive Neighbor Solicitations.
* look up proxy NDP entries not on the routing table but on the
link-level address table when receiving Neighbor Solicitations.
Reviewed By: melifaro
Differential Revision: https://reviews.freebsd.org/D35307
MFC after: 2 weeks
Fix:
tests/sys/kern/unix_passfd_test.c:414:24: error: comparison of integers
of different signs: 'int' and 'unsigned int' [-Werror,-Wsign-compare]
ATF_REQUIRE(getnfds() == nfds + MAXFDS);
~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
powerpc.powerpc/tmp/usr/include/atf-c/macros.h:144:15: note: expanded
from macro 'ATF_REQUIRE'
if (!(expression)) \
^~~~~~~~~~
1 error generated.
--- unix_passfd_test.o ---
o Exercise bounds checking when sending large set of file descriptors,
that can't fit into single control mbuf.
o Exercise resource limits checks when receiving a large sets.
o Check that socket isn't left in a completely stuck state when we can't
receive SCM_RIGHTS due to limits. Current SOCK_STREAM socket would
free the control, but leave the data in. This seems to be a legit
behavior for a stream socket, as we don't want holes in the data.
PR: 239250
Reviewed by: markj
Differential revision: https://reviews.freebsd.org/D35315
Just invoke the test program directly instead of trying to convert its
output to TAP format. The test suite is all or nothing; there's no way
to enumerate individual test cases, so there's no advantage in trying to
massage its output, and doing so throws away information that's useful
when diagnosing test failures.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
One of the tests exposes the regression reported in PR 264131.
One test is disabled because FreeBSD does not support setting EV_ONESHOT
on an already-added periodic timer. Though, in this case the flag is
simply ignored, which isn't ideal.
One test is slightly modified to set EV_ADD when reconfiguring a
disabled timer per some commentary in PR 258412.
Ideally we would re-import the test suite from libkqueue but there is a
fair bit of divergence so this will require some effort. This just gets
us one small step closer while increasing test coverage.
PR: 258412
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
- Some EVFILT_PROC bugs were fixed around the time that the tests were
disabled.
- I can't reproduce any failures locally.
- Jenkins logs referenced from the PR are gone, so let's re-enable the
tests and see whether a problem persists.
PR: 233586
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Only the send_and_shutdown test is exclusive, but kyua doesn't allow
to prevent parallel execution of a single test.
Approved by: glebius
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D35260
Validate the cases where a match can be found immediately and where no
match can be found. This extends the existing test cases and is enough
to catch the bug fixed in commit 6e7a585348 ("bitstring: fix ff_area()
when start!=0").
Reviewed by: dougm
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35259
Extend the existing ethernet dummynet test to also test dummynet on the
outbound direction.
This used to be a problem as traffic shaping wasn't done in the ethernet
code. It merely tagged the packet and left shaping up to the layer 3 pf
code. This works in the inbound direction, but not for outbound traffic
where we hit the L3 code first and only then the L2 code.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D35258
