Commit Graph

1184 Commits

Author SHA1 Message Date
David E. O'Brien
96e934df56 Re-enable pcfclock in the build. 2003-08-10 01:35:36 +00:00
Hartmut Brandt
6757bf1b26 When compiling the module with INVARIANTS we also need INVARIANT_SUPPORT. 2003-08-06 16:01:32 +00:00
Ruslan Ermilov
889109df01 There's already the elink.ko module available, don't embed it here.
Reviewed by:	markm
2003-08-02 18:46:02 +00:00
Nate Lawson
dda5f182ae Fix the new DA_OLD_QUIRKS option for normal and module compiles.
Pointed out by: 	bde
2003-07-29 18:08:16 +00:00
Peter Wemm
a35b33869d Initiate de-orbit burn for fpu-less operation. 386+387 is still
theoretically supportable, but you'd really be happier with FreeBSD 2.1.8
on it.
2003-07-22 08:11:17 +00:00
Sam Leffler
35ba56eca3 hook safe driver to the build 2003-07-21 21:48:45 +00:00
Sam Leffler
b55b9b34ba SafeNet crypto driver
Sponsored by:	Global Technology Associates, Inc.
MFC after:	1 day
2003-07-21 21:47:47 +00:00
Hartmut Brandt
58aa55efa5 This is a pseudo physical interface for the HARP ATM stack. When loaded
it attaches to all existing NATM network interfaces in the system
and creates a HARP physical interface for each of them. This allows
us to use the same set of ATM drivers for all ATM stuff. It is
possible to use the same interface for HARP, NATM and netgraph at the
same time.
2003-07-21 13:56:22 +00:00
John-Mark Gurney
45dd937507 make usb bus_dma aware.
Reviewed by:	joe among others
2003-07-15 22:42:37 +00:00
Nate Lawson
8a7e9ab4b7 Fix the ACPI_DEBUG build for the non-module case. Move the #define into
acfreebsd.h and remove it from the Makefile.  Now ACPI_DEBUG implies
ACPI_DISASSEMBLER.

Noticed by:	marcel
2003-07-15 19:18:41 +00:00
Hartmut Brandt
8dd4275c36 This is a driver for IDT77252 based ATM interfaces. It has been tested
with a ProATM-155 and an IDT evaluation board and should also work
with a ProATM-25 (it seems to work at least, I cannot really measure
what the card emits). The driver has been tested on i386 and sparc64,
but should work an other archs also. It supports UBR, CBR, ABR and VBR;
AAL0, AAL5 and AALraw. As an additional feature VCI/VPI 0/0 can be
opened for receiving in AALraw mode and receives all cells not claimed
by other open VCs (even cells with invalid GFC, VPI and VCI fields and
OAM cells).

Thanks to Christian Bucari from ProSum for lending two cards and answering
my questions.
2003-07-15 11:57:24 +00:00
Hartmut Brandt
7e9024cdd9 Add a facility for devices, specifically network interfaces, that require
large to huge amounts of small or medium sized receive buffers. The problem
with these situations is that they eat up the available DMA address space
very quickly when using mbufs or even mbuf clusters. Additionally this
facility provides a direct mapping between 32-bit integers and these buffers.
This is needed for devices originally designed for 32-bit systems. Ususally
the virtual address of the buffer is used as a handle to find the buffer as
soon as it is returned by the card. This does not work for 64-bit machines
and hence this mapping is needed.
2003-07-15 08:59:38 +00:00
Nate Lawson
06bc618c85 Fix build with ACPI_DEBUG option.
Reported by:	Mark Santcroos <marks@ripe.net>, des+tinderbox
2003-07-14 17:19:45 +00:00
Bill Paul
85a94674d0 tdkphy.c is missing from this module's Makefile. Add it. 2003-07-10 05:12:10 +00:00
John Baldwin
6c525ee43c Add an ACPI to ISA psuedo bridge driver. It attaches an isab(4) device to
ACPI nodes with the plug and play ID's defined for a "Generic ISA Bus
Device" as defined in section 10.7 of the ACPI 2.0 specification.  This
gives machines like the Libretto that contain a fake ISA bus that is not
connected via a PCI-ISA bridge an ISA bus for ISA devices to attach to.

Tested by:	markm
2003-07-08 18:59:32 +00:00
John-Mark Gurney
e4bfcbdb32 add the mbr_enc file so that we can load the module on sparc64. 2003-07-05 08:11:43 +00:00
Sam Leffler
3d238d9e98 nitpicking
Submitted by:	Ruslan Ermilov <ru@FreeBSD.org>
2003-06-30 05:25:36 +00:00
Ruslan Ermilov
cf8603ce44 Attach the amd(4) module to the i386 and pc98 builds only;
untested on other platforms.

Not objected to by:	scottl
2003-06-28 08:01:27 +00:00
Sam Leffler
0ba9760820 switch to new 802.11 support 2003-06-28 06:19:01 +00:00
Sam Leffler
81e151e45f hookup ath and ath_hal to the build 2003-06-28 06:18:37 +00:00
Scott Long
c31c852372 Hook umct up to the module tree. 2003-06-28 05:46:16 +00:00
Scott Long
871f5c8c2d Add 'umct', a driver for MCT Corp. and Belkin F5U109 USB-Serial adapters.
This is based on the ubsa driver by Alexander Kabaev along with documentation
gleaned from the Linux mct_u232 driver.  I've had this driver sitting in my
tree for almost 6 months, and several others have found it useful.
2003-06-28 05:45:55 +00:00
Ruslan Ermilov
61340e72c4 Attach the "null" module to the LINT build.
Reviewed by:	markm
2003-06-26 08:06:31 +00:00
Sam Leffler
b52f49a9a0 module for atheros hal 2003-06-25 14:43:50 +00:00
Hartmut Brandt
cfca62bfac This is a netgraph node to access ATM interfaces. It works with the
hatm(4) and fatm(4) drivers, en(4) will follow soon.
2003-06-25 13:20:19 +00:00
Ian Dowse
7a07b896c5 The ext2fs module needs a machine-dependent bitops.h file, so only
build it on the i386 and alpha architectures, where this has been
set up (there is also a sparc64-bitops.h in sys/gnu/ext2fs, but it
appears to be broken and it is not linked up).

This should unbreak the sparc64 LINT build.
2003-06-24 13:35:46 +00:00
Ian Dowse
ce3ae5c7e3 Include the ufs module if ALL_MODULES is defined so that it gets
built by LINT. Also override a number of knobs for enabling and
disabling various modules in the ALL_MODULES case to further increase
LINT's module coverage.

Submitted by:	ru
2003-06-23 22:01:01 +00:00
Matthew N. Dodd
26a9ce3e36 Hook up scd(4) to the build.
Noticed by:	 ru
2003-06-23 20:52:03 +00:00
Ian Dowse
620d309e35 Add a few missing opt_ files to make this module compile again. 2003-06-23 19:41:00 +00:00
Sam Leffler
ae8afbf2dd module for Atheros 802.11 driver 2003-06-23 17:02:43 +00:00
Hartmut Brandt
fb24f088ae This is a driver for Fore PCA200E cards that uses busdma and works on
little endian and big endian and with 32 and 64 bit pointers. It already
has the hooks to be used for HARP, NATM and ngATM.
2003-06-23 14:46:12 +00:00
Poul-Henning Kamp
22db1e9ff5 Add "GEOM_FOX", a class which detects and selects between multiple
redundant paths to the same device.

This class reacts to a label in the first sector of the device,
which is created the following way:

        #    "0123456789abcdef012345..."
        #    "<----magic-----><-id-...>
        echo "GEOM::FOX       someid" | dd of=/dev/da0 conv=sync

NB: Since the fact that multiple disk devices are in fact the same
    device is not known to GEOM, the geom taste/spoil process cannot
    fully catch all corner cases and this module can therefore be
    confused if you do the right wrong things.

NB: The disk level drivers need to do the right thing for this to
    be useful, and that is not by definition currently the case.
2003-06-18 09:29:28 +00:00
Hartmut Brandt
c594298bee This is a driver for Fore/Marconi HE155 and HE622 ATM cards. It is full
busdma and has extensively been tested on i386 and sparc64.
2003-06-17 16:12:50 +00:00
Hartmut Brandt
57112b8d4a Repo-copy of sys/pci/if_en_pci.c to the rest of the midway driver (sys/dev/en)
so that all of the driver sources are in one place. Adjust the configuration
files and the module build.
2003-06-16 15:25:51 +00:00
Hartmut Brandt
7d361237dc Fix the breakage introduced by rev. 1.43 of sys/dev/midway.c (don't commit
on friday 13th and without making a universe). This adds struct and
constant definitions for ATM traffic parameters and re-enables the
build of the midway driver.

Tested by: make universe
2003-06-16 13:52:27 +00:00
Yoshihiro Takahashi
97caa42aea Include "../Makefile.inc" 2003-06-15 04:27:22 +00:00
Yoshihiro Takahashi
a252a7bf01 Most power management devices don't exist on pc98. 2003-06-15 04:24:28 +00:00
Warner Losh
e45d184c46 The en module has been broken for the last 40 hours. Disconnect it
from the tree until it is fixed.  Since it is an atm driver, it isn't
commonly used so this will not negatively impact too many people.
harti can reconnect it when he resurfaces and corrects the en module
problems.  This should allow snapshots to start succeeding again.

Reported by: lots of people
2003-06-15 04:15:29 +00:00
John-Mark Gurney
35ae09bc0e Fix the KMOD for the lpbb device. 2003-06-14 20:43:33 +00:00
Nicolas Souchu
e827419577 amdpm was omitted from the build of i2c controllers. Fixed. 2003-06-14 20:32:46 +00:00
Nicolas Souchu
49336098dd Add i2c to the list of modules to build. 2003-06-14 20:21:35 +00:00
Greg Lehey
887cae2b70 Remove these files. They have successors in tools/debugscripts. 2003-06-12 23:30:57 +00:00
Hartmut Brandt
591f4054cb This is a driver for the physical layer chips used in ATM interfaces.
It currently supports the PMC Sierra Lite, Ultra and 622 chips and
the IDT 77105. The driver handles media options and state in a consistent
manner for ATM drivers. The next commit to the midway driver will make
it use utopia.
2003-06-12 14:28:32 +00:00
Poul-Henning Kamp
87eca0f99c Add new geom_ccd module 2003-06-09 21:49:54 +00:00
Poul-Henning Kamp
68bf8b56da remove old CCD module 2003-06-09 21:48:12 +00:00
Gordon Tetlow
03d26d7e42 Add a geom_vol_ffs module and hook up to the build. 2003-06-03 20:32:13 +00:00
Dag-Erling Smørgrav
f834a1168c Add (but do not connect) a half-finished driver for Aureal Vortex cards.
The mixer works, pcm support is half done.
2003-06-01 11:58:46 +00:00
Poul-Henning Kamp
5d9bef6473 Add GEOM module compilation shims. 2003-05-31 18:36:41 +00:00
Yoshihiro Takahashi
3e4e484918 Move the ips driver from ${MACHINE_ARCH} == "i386" to ${MACHINE} == "i386".
Approved by:	re (scottl)
2003-05-13 11:26:08 +00:00
Scott Long
3bd9d6f570 Hook up the ips module 2003-05-11 06:40:09 +00:00