Commit Graph

30 Commits

Author SHA1 Message Date
Matt Jacob
e48b2487a0 Fix some stupid copyright mistakes that have been there for quite some time. 2007-03-10 02:39:54 +00:00
Matt Jacob
6c81a0aecb MFP4: Move default setting to the end of isp_reset instead of the
front of isp_init so we can read NVRAM even if we're role ISP_NONE.
Prepare for reintroduction of channels (for FC) for N-Port
Virtualization.

Fix a botch in handle assignment that caused us to nuke one device
when a new one arrives and end up with two devices with the same
identity in the virtual target mapping table.
2007-01-20 04:00:21 +00:00
Matt Jacob
10365e5a68 Add 4Gb (24XX) support and lay the foundation for a lot of new stuff. 2006-11-02 03:21:32 +00:00
Matt Jacob
b4110d4604 Fix na_fcentry_t to not have a lun field. Fix indentation in handly
the notify structs. Fix messages in isp_got_msg_fc to print out the
loop id of the sender- not the wwpn which will be synthesized later,
if possible, in the outer layers. Put in debug printouts to pair
a notify ack to a notify so one can see the start/close of an
immediate notify event. Put in spsace for TASK MANAGEMENT response
flags (which we don't do yet).
2006-08-04 20:20:00 +00:00
Matt Jacob
9cd7268e5a Some more gratuitous format and name changes.
Pull in some target mode changes from a private branch.
Pull in some more RELENG_4 compilation changes.

A lot of lines changed, but not much content change yet.
2006-04-21 18:30:01 +00:00
Matt Jacob
1dae40eb49 a) clean up some declaration stuff (i.e., make more modern with respect
to getting rid u_int for uint and so on).

b) Turn back on 64 bit DAC support. Cheeze it a bit in that we have two
DMA callback functions- one when we have bus_addr_t > 4 bits in width and
the other which should be normal. Even Cheezier in that we turn off setting
up DMA maps to be BUS_SPACE_MAXADDR if we're in ISP_TARGET_MODE. More work
on this in a week or so.

c) Tested under amd64 and 1MB DFLTPHYS, sparc64, i386 (PAE, but insufficient
memory to really test > 4GB). LINT check under amd64.

MFC after:	1 month
2006-02-15 00:31:48 +00:00
Matt Jacob
e526523707 First of several commits as this driver is dusted off and maybe brought
up to date.  Principle changes for this reelase is to support 2K Port Login
firmware. This allows us to support the 2322 (and 2422 4Gb) cards which only
come with the 2K Port Login firmware. The 2322 should now work- but we don't
have firmware sets for it in ispfw (as the change to load 2K Port Login f/w
hasn't been made- that f/w is so big it has to be loaded in more than one
chunk).

Other changes are the beginnings of cleaning up some long standing target
mode issues. The next changes here will incorporate a lot of bug fixes
from others.

Finally, some copyright cleanup and attempts to make the parts of the
driver that are FreeBSD specific start conforming more to FreeBSD style.

MFC after:	1 month
2006-01-23 06:23:37 +00:00
Matt Jacob
1b94141649 Add some macros for inserting tag ids.
MFC after:	2 weeks
2005-01-23 06:28:49 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Matt Jacob
2f9e7606fe Some ridiculous target mode botches- like having the wrong definitions
for messages. Some spelling fixes. Some target mode structure cleanups
to reflect reality.
2003-09-13 01:58:26 +00:00
Matt Jacob
9dba6a4ecb Set default command count to 0xfe. This tells the f/w essentially
to *not* do flow control based upon resource counts for the firmware.
Increase default immediate notify count to 16.

Change isp_target_async to a function returning an integer.
2002-06-16 04:54:46 +00:00
Matt Jacob
371777b161 Limit fabric search to a default 256 entries. This will all go away
soon because it's just getting harder and harder to find switches
that correctly implement the GET ALL NEXT subcommands for the SNS
protocol.

Latch up result out pointer and set a busy flag when we're looking
at the response queue. This allows for a cleaner way to make sure
we don't get multiple CPUs trying to read the same response queue
entries.

Change how isp_handle_other_response returns values (clarity).

Make PORT UNAVAILABLE the same as PORT LOGOUT (force a LIP).

Do some formatting changes.

MFC after:	0 days
2002-03-21 21:10:16 +00:00
Matt Jacob
75c1e828c0 + A variety of 23XX changes:
disable MWI on 2300

	based on function code, set an 'isp_port' for the 2312- it's a
	separate instance, but the NVRAM is shared, and the second port's
	NVRAM is at offset 256.

+ Enable RIO operation for LVD SCSI cards. This makes a *big* difference
as even under reasonable load we get batched completions of about 30
commands at a time on, say, an ISP1080.

+ Do 'continuation' mailbox commands- this allows us to specify a work
area within the softc and 'continue' repeated mailbox commands. This is
more or less on an ad hoc basis and is currently only used for firmware
loading (which f/w now loads substantially faster becuase the calling
thread is only woken when all the f/w words are loaded- not for each
one of the 40000 f/w words that gets loaded).

+ If we're about to return from isp_intr with a 'bogus interrupt' indication,
and we're not a 23XX card, check to see whether the semaphore register is
currently *2* (not *1* as it should be) and whether there's an async completion
sitting in outgoing mailbox0. This seems to capture cases of lost fast posting
and RIO interrupts that the 12160 && 1080 have been known to pump out under
extreme load (extreme, as in > 250 active commands).

+ FC_SCRATCH_ACQUIRE/FC_SCRATCH_RELEASE macros.

+ Endian correct swizzle/unswizzle of an ATIO2 that has a WWPN in it.

MFC after:	1 week
2002-02-04 21:04:25 +00:00
Matt Jacob
4fd13c1ba2 Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.

The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.

One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.

Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.

Additional changes:

Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.

Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).

MFC after:	2 weeks
2001-12-11 00:18:45 +00:00
Matt Jacob
2332ac8c61 Fix SET_IID_VAL/SET_BUS_VAL macros to usable.
MFC after:	4 weeks
2001-09-04 19:42:13 +00:00
Matt Jacob
f0f4c8ae4b Add a microcomment about how you'd use ispds64_t or ispdlist_t
for CTIO3/CTIO4 entries.
2001-07-04 18:51:06 +00:00
Matt Jacob
5d57194434 Spring MegaChange #1.
----

Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).

----

Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things.  Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.

The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.

These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.

---

Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.

--

Start putting in prototype 2300 support.  Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.

Do some more substantial target mode cleanups.

MFC after:	8 weeks
2001-05-28 21:20:43 +00:00
Matt Jacob
b5da7b232e Amazing. The bits to enable tagged queing in target mode, grok that a
tag is active for an ATIO, and say that you want to reconnect with
a tag value in a CTIO have *never* been exercised until now. This lossage
derived from Solaris code where this stuff originally came from that is
about 7 years old. Amazing.

We now bundle the incoming tag (legal values are 0..256) as the low
16 bits of the ccb_accept_tio's at_tagid while we put the firmware
handle for this ATIO in the top 16 bits- define some macros to make
this cleaner.

Complete some Ansification.
2001-04-04 21:46:48 +00:00
Matt Jacob
f5a4462713 First cut of target mode swizzling for non-little endian machines.
It's probably wrong but it's a start.
2001-03-14 04:14:22 +00:00
Matt Jacob
5f5aafe1fc Switch to using 16 bit handles instead of 32 bit handles.
This is a pretty invasive change, but there are three good
reasons to do this:

1. We'll never have > 16 bits of handle.
2. We can (eventually) enable the RIO (Reduced Interrupt Operation)
bits which return multiple completing 16 bit handles in mailbox
registers.
3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec
changed such that at_reserved (which was 32 bits) was split into
two pieces- and one of which was a 16 bit handle id that functions
like the at_rxid for Fibre Channel (a tag for the f/w to correlate
CTIOs with a particular command). Since we had to muck with that
and this changed the whole handler architecture, we might as well...

Propagate new at_handle on through int ct_fwhandle. Follow
implications of changing to 16 bit handles.

These above changes at least get Qlogic 1040 cards working in target
mode again. 1080/12160 cards don't work yet.

In isp.c:
Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
Matt Jacob
b0a3ba7e28 Fix at2_entry_t to reflect what the firmware actually writes (instead
of just deriving from SCSI at_entry_t). In this case, there is no
'suggested sense' for FC cards.
2001-02-27 00:14:39 +00:00
Matt Jacob
7325560821 add a couple off offset defines for ATIO2s 2000-12-28 23:27:54 +00:00
Matt Jacob
aa57fd6fa5 some copyright cleanups 2000-09-21 20:16:04 +00:00
Matt Jacob
69fbe07a2e Fix typo. Remove isp_tdebug (we'll use ISP_LOGTDEBUG2 in isp->isp_dblev
as a selector now). Change DFLT_CMD_CNT to a fixed amount for now.
2000-08-01 06:23:24 +00:00
Matt Jacob
482cf5c2e7 Add in some new IN_XXX and CT_XXXX flags in preparation
for the rototilling that !*$)~@!$_@*_(~@$*_(~@$*~@$*
Qlogic F/W changes will need.
2000-07-18 07:06:47 +00:00
Matt Jacob
d22fcb6b75 add "disable autodisconnect" flags 2000-06-18 04:44:41 +00:00
Matt Jacob
9dae880716 Some minor tweaklets. 2000-04-21 02:05:54 +00:00
Matt Jacob
b6f774e39b Fix ITDEBUG macro.
Approved: jkh
2000-02-15 00:54:26 +00:00
Matt Jacob
427469a4a8 cleanup 2000-01-15 01:48:24 +00:00
Matt Jacob
0615a54798 These are platform independent definitions for target mode support-
code gratefully borrowed from Patrick Stirling who did a lot of the
grunt work on this years ago. There are also some beginnings of
swizzle macros in case we go to a big endian machine. This is just
a first pass at this and is likely to change a bit over the next
2000-01-03 23:58:41 +00:00