the "READ_CAPACITY" command, rather than the physical blocksize
reported in the physical geometry code-page.
Also don't print out worrying bogus messages when probing a
device that has no media. There's no point in printing out
something that is unknowable. It just confuses things.
Move the check for valid blocksize out of 'open()' to the subroutine
that actually finds this out, thus probe/attach can also report and
act on the problem.
under -current. The actual preparation of the next track will now be
deferred until just before the first write operation. Otherwise,
opening the device with write intent will cause the execution of
commands that are illegal in `limited command set mode' (i.e., after
the write channel has been opened).
While i was at it, cleaned up the worm_open() function a bit.
Removed the volume overflow pre-check in worm_strategy(). It was
time-consuming, and rather useless in many cases anyway (with the size
being reported for just the entire volume only), so we can as well let
the actual SCSI command fail instead, where it'll properly be reported
as EIO.
Partially submitted by & discussed with: jmz
unknown drive. Such a drive will be configured by worm(4)
nevertheless (albeit with a warning), but cannot be opened except of
the SCSI control device (so scsi(8) or cdrecord will continue to
work).
break for the usual sector size. dscheck() adjusts b_bcount to
handle EOF, so we must scale it and not preserve it. i/o beyond
the end of partitions has been broken since rev.1.96.
Not fixed in: od driver
much grieve to owners of IBM drives when used in conjunction with
tagged command queuing, and didn't serve any purpose at all (since
experiments have proven that it simply didn't work).
Instead, call scsi_start_unit() once in sd_attach(), so in case the
drive has been configured to `remote start', it will spin up there.
(If it has spun down later, it must have been because of administrator
action (scsi(8)) anyway.)
While i was at it, bump the timeout for scsi_start_unit() to 30
seconds. 10 seconds were way too few for most drives.
PR: 4486
Submitted by: tegge@idi.ntnu.no (Tor Egge)
Implement a function is_adapter_memory() in order to determine what
should nto be dumped at all. Currently, only populated with the ``ISA
memory hole''. Adapter regions of other busses should be added.
Change sd_open, sd_close and sd_ioctl to use this lock to ensure
serialization of some critical operations, thus avoiding some
race conditions. Ideas picked from NetBSD (ccd and sd devices).
This fixes one of the problems noted in PR kern/3688.
Reviewed by: "Justin T. Gibbs" <gibbs@plutotech.com>
These commands are required for the "Disk-At-Once" write process:
WORMIOCREADSESSIONINFO returns the length of the lead-in and lead-out areas
and WORMIOCWRITESESSION is used to send the table of contents of the disk.
PR: kern/3629: /sys/scsi/pt.c doesn't...
Submitted by: simokawa@sat.t.u-tokyo.ac.jp (Hidetoshi Shimokawa)
Add a catch-all record for removable SCSI devices to default them to
only one LUN.
PR: kern/3580: Bad LUN probes on Xyratex...
- remove all calls to scsi_stop_unit(). Some drives refuse commands when
stopped. This will fix the 'device not configured' message which was
cleared after opening/closing the tray.
- Never set the logical block address in the scsi_cmd struct when writing.
The computation was bogus for block sizes not a multiple of DEV_BSIZE.
(the bug is still there in the READ case)
- reset the block size to the 2048 bytes in finalize_track() track to avoid
an error when mounting a disk after an audio write.
- remove the WORMIOCQUIRKSELECT ioctl. Quirks are now recorded at probe time
(see scsiconf.c)
- change and expand the argument to the WORMIOCPREPTRACK ioctl. It now possible
to select more track options (copy bits, ISRC codes, track type,
track number)
- add an error handler to catch false errors (warnings in fact) and record
the error type.
- add an ioctl call (WORMIOERROR) to get more information on the nature of the
error when a command or a write failed.
- add an ioctl call (WORMIOCFINISHTRACK) to finalize a track without closing
the device (closing the device still finalize the track if the command was
not performed)
Approved by: joerg
