Commit Graph

349 Commits

Author SHA1 Message Date
Joerg Wunsch
290dd077ef Here is a minor patch for FreeBSD 2.0R to allow it to recognize
2.88MB floppy drives.  All it does is set the type to 1.44MB if
it finds the 2.88MB drive.

Submitted by:	Andrew Gillham <gillham@andrews.edu>
1994-12-04 20:22:20 +00:00
Jordan K. Hubbard
1ca6f46d56 Reverse the meaning of previous change.
Now floppy tape support is *disabled* unless you specifically
request otherwise.  Poul wanted it this way, and I guess I'm not going to argue
though it may seem counter-intuitive.  We can always change it back, later.
1994-11-30 12:04:28 +00:00
Jordan K. Hubbard
8580379053 Experimental change to floppy driver to NOT probe the floppy tape if
flags & 0x1.  Somebody should build a kernel with this and see if
the floppy-tape damaged people can turn it off properly with userconfig.
I can't reproduce the original problem here.
1994-11-29 15:46:20 +00:00
Poul-Henning Kamp
04b734cf24 Extended the SEEKWAIT and RECALWAIT somewhat to avoid annoying messages. 1994-11-18 10:18:36 +00:00
Andrey A. Chernov
4b69fb52f4 Change "fdx: Floppy not writeable" to less confusing
"fdx: write protected". Not writeable maybe means bad, etc.
1994-11-08 06:34:04 +00:00
Jordan K. Hubbard
6febd9aaf5 From: Lars Fredriksen <fredriks@mcs.com>
Here is a patch to fd.c that will check to make sure the floppy
is not writeprotected when you try to open the device RW.
Submitted by:	lars
1994-11-08 05:42:10 +00:00
Jordan K. Hubbard
5e235068bc Back out Joerg's latest commit. Sorry, Joerg, but this breaks the install
floppies now.  I'm not sure why, but things hang when it gets to the
`changing root to fd0c' part.  Without your latest commit, everything works
fine.  Maybe you can figure out what you broke after ALPHA! :)
1994-11-02 09:08:40 +00:00
Joerg Wunsch
5d04c702eb Several minor fixes to the floppy driver:
.	avoid resetting the FDC every time the last motor is going off;
	instead, give it a 60-second period for possible later reactivation.
	This prevents us from needing to recalibrate the FDC too often,
	but still allows for an ``automagic error recovery', just in case the
	controller is absolutely stuck. (Simply wait for 60 seconds, and
	try it again.)

.	made the floppy head settle time after a seek a constant
	that might be overridden by a config option. (Well, actually the
	divisor of the settle time). Pepople often reported problems with
	their floppies, so i need a simply mechanism that allows them
	to play with that value. (I personally cannot find any problem
	on *my* drives.)

.	implement the FD_DEBUG ioctl command, in case the driver
	is compiled with DEBUG turned on.

.	removed a bogus parameter from a printf; the remaining warnings
	from gcc -Wall seem to be warnings about the %b format gcc cannot
	understand

.	rearrange Garett's code to fit better in the existing structure
	of #define/type/function ordering.

.	make everything fit into 79 columns again.
1994-10-30 20:04:40 +00:00
Jordan K. Hubbard
54c7241bd3 Julian Elischer's disklabel fixes. 1994-10-27 20:45:13 +00:00
Garrett Wollman
2f86936a07 Finished device configuration database work for all ISA devices (except `ze')
and all SCSI devices (except that it's not done quite the way I want).  New
information added includes:

-	A text description of the device
-	A ``state''---unknown, unconfigured, idle, or busy
-	A generic parent device (with support in the m.i. code)
-	An interrupt mask type field (which will hopefully go away) so that
.	  ``doconfig'' can be written

This requires a new version of the `lsdev' program as well (next commit).
1994-10-23 21:28:03 +00:00
Joerg Wunsch
dc8603e3ec Checking for timeout at several critical calls to ``out_fdc()'' now,
so i hope i've finally removed all the occasions where the driver
got stuck when there's no floppy in the drive.
Also attemmpting to  omit the error mesage for ``recalib failed''
for the first time, since people tend to be confused about this.
1994-10-21 16:58:50 +00:00
Garrett Wollman
f1d8109335 Add support for devconf to a large number of device drivers, and do
the right thing in dev_goawayall() when kdc_goaway is null.
1994-10-19 01:59:11 +00:00
Garrett Wollman
922006325b isa.c isa_device.h: declare & define {e,}isa_{in,ex}ternalize().
fd.c: register devices and implement disk stats.
wd.c: fix disk stats and call isa_externalize() as appropriate.
1994-10-19 00:08:07 +00:00
Poul-Henning Kamp
702c623a8a Cosmetics. Silence gcc -Wall. Much more to do here :-( 1994-10-10 01:12:27 +00:00
Poul-Henning Kamp
8c0390626e An ifdef almost hit where it was supposed to go. Joerg owes me a good
German beer I think...
1994-09-25 23:37:38 +00:00
Joerg Wunsch
c7a64a0369 Copied over the transfer speed definitions from sys/i386/isa/fdreg.h.
This is needed for having the fdformat program no longer searching
non-public include paths.
Protect the definitions in fdreg.h against double inclusion.
1994-09-25 18:42:23 +00:00
Poul-Henning Kamp
87eafbcacd Moved the ft.c from 1.1.5.1 over. It works on my Conner thingie. Got
rid of a ton of unused vars at the same time.
1994-09-25 06:04:25 +00:00
Joerg Wunsch
6b7bd95b6d Fixed the problem where the floppy has incorrectly failed probing
when the drive had been left on a cylinder > 67 after kernel boot. The
most common case for this is booting a kernel that is located on
the inner cylinders of a floppy.

Also removed all occurences of spinwait(), replaced by DELAY.
Nuked a return line saying nothing, this might make Bruce happy 8^)

Submitted by:	partially by Bruce Evans
1994-09-17 18:08:36 +00:00
David Greenman
3a2f7427fe Updated driver to the 1.1.5 version:
date: 1994/05/22 12:35:38;  author: joerg;  state: Exp;  lines: +6 -6
First round of floppy changes. Try making `fd' more robust.

New features:
  .  ioctl command for setting the drive type (density etc.); restricted
     to the super-user
  .  ioctl for getting/seting `drive options'; currently only option
     is FDOPT_NORETRY: inhibit the usual retries; used when verifying
     a newly formatted track

Fixes:
  .  function prototypes
  .  made all internal functions `static'
  .  cleaned up & corrected .h files
  .  restructured, to make the chaotic function sequence more rational
  .  compiled with -Wall, and cleared all warnings
  .  introduced a mirror for the (write-only) `digital output register',
     to avoid the current kludge
  .  device probing completed by seeking/recalibrating, and looking
     for track 0 being found
  .  holding the controller down in reset state while it is idle (and
     thus saving allot of headaches)
  .  make requests fail that are not a multiple of the (physical)
     sector size
  .  removed the fixed physical sector size (512 bytes), allowing for any
     size the controller could handle (128/256/512/1024 bytes)
  .  replaced some silly messages
  .  fixed the TRACE* macro usage, debugging reports should be complete
     now again (debugging output is HUGE! though)
  .  removed fd_timeout for SEEK command; seeks are always reported by
     the controller to succeed, since the `success' only refers to the
     controller's idea of success - there is no hardware line to tell about
     the seek end (other than the `track 0' line)
  .  catch SENSEI's that report about a `terminated due to READY changed'
     status - could happen after a controller reset
  .  converted ``hz / <something>'' divide operations to divisors that are
     powers of two, so gcc can optimize them into shifts
  .  write/format operations are checked against a write-protected medium
     now *prior* starting the operation
  .  error reports of `invalid command' and `wrong cylinder' will cause
     shortcuts in the retrier() now
  .  fixed a bug in the retrier() causing bogus block numbers to be reported
  .  fdformat() does care for errors now

Known Bugs:
  .  no attempts have been made (yet) to improve the performance
  .  sometimes, bogus ``seek/recalib failed'' messages are logged; this
     is still a bug in the driver, but it's not harmful since it's
     usually caught by the retrier()

Reviewed by:
Submitted by:
Obtained from:
1994-09-17 16:56:10 +00:00
Andrey A. Chernov
b2be795bf2 Use RAW_PART=2 to trick diskerr 1994-08-29 21:32:31 +00:00
Paul Richards
d091793974 Ran ft.c through ident.
Added a missing #ifdef INET wrapper in lpt.c

Main change:
	Removed the timeout_func_t casts from timeout calls and
	correctly defined the timeout routines to conform to
	the new format.
lpt.c doesn't have this change.

Reviewed by:
Submitted by:
1994-08-23 07:52:29 +00:00
Garrett Wollman
f540b1065a Change all #includes to follow the current Berkeley style. Some of these
``changes'' are actually not changes at all, but CVS sometimes has trouble
telling the difference.

This also includes support for second-directory compiles.  This is not
quite complete yet, as `config' doesn't yet do the right thing.  You can
still make it work trivially, however, by doing the following:

rm /sys/compile
mkdir /usr/obj/sys/compile
ln -s M-. /sys/compile
cd /sys/i386/conf
config MYKERNEL
cd ../../compile/MYKERNEL
ln -s /sys @
rm machine
ln -s @/i386/include machine
make depend
make
1994-08-13 03:50:34 +00:00
Rodney W. Grimes
26f9a76710 The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.
Reviewed by:	Rodney W. Grimes
Submitted by:	John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
David Greenman
0e195446b7 Bug fixes and performance improvements from John Dyson and myself:
1) check va before clearing the page clean flag. Not doing so was
	causing the vnode pager error 5 messages when paging from
	NFS. (pmap.c)
2) put back interrupt protection in idle_loop. Bruce didn't think
	it was necessary, John insists that it is (and I agree). (swtch.s)
3) various improvements to the clustering code (vm_machdep.c). It's
	now enabled/used by default.
4) bad disk blocks are now handled properly when doing clustered IOs.
	(wd.c, vm_machdep.c)
5) bogus bad block handling fixed in wd.c.
6) algorithm improvements to the pageout/pagescan daemons. It's amazing
	how well 4MB machines work now.
1994-04-20 07:06:57 +00:00
Nate Williams
e7e0afea3b From: Jim Babb <babb@sedhps01.mdc.com>
Subject: Re: Bugs with floppy drives
Date: Tue, 8 Mar 94 9:11:54 CST

The transfer speed was only set in the retry after error, not  when
switching drives.
1994-03-08 16:25:29 +00:00
Andrey A. Chernov
b0568305d3 360 DD entry speed fixed to 250KBPS 1994-03-02 18:34:41 +00:00
Andrew Moore
56ef028575 floppy tape support shouldn't interfere with floppy disk driver on
systems with no floppy tape drive (patch from Jim Babb).
1994-03-02 08:10:42 +00:00
Nate Williams
a60eff2770 From: Jim Babb <babb@sedhps01.mdc.com>
Date: Mon, 14 Feb 94 15:57:14 CST

This adds a copyright to the fdc.h file and fixes a bug in re-tries
during writes on a heavily loaded system.
1994-02-14 22:24:28 +00:00
Andrew Moore
9c2638e6dc Tentative fdc patches... 1994-02-07 22:12:45 +00:00
Andrew Moore
b99f0a4a8d Add floppy tape driver - fd => fdc 1994-02-07 04:27:13 +00:00
Andrey A. Chernov
126518a182 Use separate fields for format GAP and read/write GAP.
Restore usage of read/write GAP.
1993-12-21 05:09:21 +00:00
Garrett Wollman
aaf08d94ca Make everything compile with -Wtraditional. Make it easier to distribute
a binary link-kit.  Make all non-optional options (pagers, procfs) standard,
and update LINT to reflect new symtab requirements.

NB: -Wtraditional will henceforth be forgotten.  This editing pass was
primarily intended to detect any constructions where the old code might
have been relying on traditional C semantics or syntax.  These were all
fixed, and the result of fixing some of them means that -Wall is now a
realistic possibility within a few weeks.
1993-12-19 00:55:01 +00:00
Andrey A. Chernov
b39c878e2b Media table reorganization.
Entries for 800 and 820 fixed.
From vak@kiae.su:
incorporate Joerg Wunsch formatting code
correct handle timeouted operations
fixed entry for 720 media
1993-12-19 00:40:49 +00:00
Andrey A. Chernov
ed2fa05ece Reorganization of format table.
GAP values changed suitable for possible format code addition.
Read/write GAP always 2 now.
Interleave parameter added for possible format code addition.
Many logical formats added.
720K physical drive added.
Problems: still can't read 720..820 media in 1.44 drive.
1993-12-18 01:16:26 +00:00
Andrey A. Chernov
2384b3a702 Added following formats (derived from MSDOS fdformat):
800K in HD 5.25in  (maximum for DD diskettes)
1.44M in HD 5.25in (for easy distributions)
1.46M in HD 5.25in (maximum for 5.25)
Some cosmetique changes.
1993-12-16 19:47:42 +00:00
Andrey A. Chernov
7ca0641bb9 No more partition bits in floppy minor.
Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density.
If density == 0, CMOS-detect format assumed.
Fix attach code for correct work with unknown CMOS
floppy types.
Trick diskerr to handle new minor.
1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
Andrey A. Chernov
fa4700b4f1 Add more strictly size check into Fdopen to eliminate
possible end-user errors.
Now:
1) on physical 1.2 can open logical 1.2, 720, 360H
2) on physical 1.44 can open logical 1.44, 720
3) on physical 360 can open logical 360
All other variants refused.
C-style improved in this check, multiply if's changed to switch.
1993-12-13 01:34:28 +00:00
Andrey A. Chernov
dffff499a9 Add 360K floppy support.
More work to add 720K floppy support.
Restore good old dependance of device and floppy type.
Now:
fd?a == 1.44
fd?b == 1.2
fd?c == 720
fd?d == 360 in HD
fd?e == 360
Add more strict size check in Fdopen, not it refuse:
1) Attempt to open any type expect fd?e, if you have only 360K drive.
2) Attempt to open fd?a if you have only 1.2 drive.
1993-12-12 20:26:56 +00:00
Andrey A. Chernov
20a2916818 Add popular 720k floppy in HD drive floppy type.
Restore check for NUMTYPES in Fdopen.
1993-12-12 16:46:54 +00:00
Andreas Schulz
fadc21ae39 Fixed the error that a Fdopen succeeds without a found fd controller in
the system.
1993-12-04 16:13:18 +00:00
Andrew Moore
16111ced9f Reset fdc during probe.
From: <dec@lazarus.nrtc.northrop.com>
   Changes between EPSILON and RELEASE of FreeBSD have again caused
the kernel to not see my floppy disk drives.  I don't know what happened,
'cause I don't see any changes to fd.c, but here is an old fix that
I have applied to the probe routine which will solve the problem (at
least for me).  Since this is a rather brute-force solution - I understand
if you want to ignore it...

[Upgrading to pre-Beta FreeBSD caused this on my system. -AM]
1993-12-03 05:01:40 +00:00
Garrett Wollman
381fe1aaf4 Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and
add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
Rodney W. Grimes
6f78ca6026 Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup.  Added $Id$ to files that did not have any version info, etc
1993-10-16 13:48:52 +00:00
Rodney W. Grimes
92ed385a09 >From: bde@kralizec.zeta.org.au (Bruce Evans)
Date: Thu, 16 Sep 93 01:35:10 +1000
Julian writes:

>In fact DEVIDLE and FINDWORK ended up being basically equivalent.
>the bit I wonder about, is the returning of 0.. What (other than
>another request from somewhere else in the kernel) is going to start
>work on the next item on the queue?

I think removing FINDWORK would make things clearer.

Nothing much is going to start work on the next item.  However, it is
pointless to continue processing the queue for the same unready drive.
Aborting all reads and trying harder to perform all writes would be
better.
Julian writes.

> no, actually it should be:
> fdt = fd_data[FDUNIT(minor(dev))].ft;

Fixed.
From: bde@kralizec.zeta.org.au (Bruce Evans)
Date: Thu, 16 Sep 93 22:56:01 +1000
The fd driver reported the wrong cylinder/head/sector numbers after an
error (ST3 is only valid after a sense-drive command), and didn't report
fs block numbers (diskerr was not used).

There was an old problem with writes to block fd devices.   Try this:

1. write protect floppy in fd0.
2. tar cf /dev/fd0a /dev/null.  Repeat a few times.  Later writes tend to
   terminate earlier.
   3. un-write protect floppy.
   4. repeat step 2.  The writes tend to return 0, 2048, 4096, ... and then
      succeed.

This was caused by a bug in vfs__bios.c.  (The bug is fixed in NetBSD's
vfs_bio.c.)  fd.c sets bp->b_resid to nonzero after an error.  vfs__bios.c
was not initializing bp->b_resid.  This causes some writes to terminate
early (e.g., writes to block devices; see spec_write()).

Related funnies:

1. Nothing tries to write the residual bytes.
2. The wd driver sets bp->b_resid to 0 after an error, so there's no
   way anything else could write the residual bytes.
3. I use the block fd device for tar because the raw device seemed to
   have more bugs long ago, and because it ought to be able to handle
   buffering more transparently (I don't want to have to know the
   device size).  But spec_write() always uses the size BLKDEV_IOSIZE
   == 2048 which is too small.  For disks it should use the size of
   one track (rounded down to meet the next track boundary or the i/o
   size).  Here it would help if the DIOCGPART ioctl worked.  But
   DIOCGPART is not implemented for floppies, and the disk size is
   ignored except for partitions of type FS_BSDFFS.

Bruce
1993-09-23 15:22:57 +00:00
Rodney W. Grimes
dc4ff321f2 Removed $Log$ section and patch kit headers. And here is the full
message for Bruces changes:

>From: bde@kralizec.zeta.org.au (Bruce Evans)
>Subject: fixes for fd driver

I think I've fixed some bugs in the 0.2.4 fd driver.

1. The main cause of hangs was that there was no timeout for seeks.  So
   attempting i/o with no floppy in the drive hung iff a seek was required.

2. Opens of unattached drives were allowed.  The kernel usually paniced
   soon after due to a bad pointer.

3. Some timeout functions ran at splclock() instead of splbio().  This
   may not have mattered.

4. The state machine was left in a funny state after a timeout.

5. Some function headers were new-style.

6. I picked up some code posted the other day to implement label ioctls.
   Now `disklabel fd0' works.  See a comment for how to modify conf.c.
1993-09-15 23:27:45 +00:00
Jordan K. Hubbard
f5f7ba035f Bruce's multifarious patches for the floppy driver (not well tested, but
since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
Rodney W. Grimes
3b3837db61 Fixed poor timeout code in out_fdc. The timeout counter was not being
reinitialized between while loops.  Added comments about what was going
on in the out_fdc routine.

out_fdc now returns if the direction bit is not set in time instead of
trying to wait for MRQ to get cleared.
1993-08-12 09:21:20 +00:00
David Greenman
2a6c898016 Modified attach printf's so that the output is compatible with the "new"
way of doing things. There still remain several drivers that need to
be updated.  Also added a compile-time option to pccons to switch the
control and caps-lock keys (REVERSE_CAPS_CTRL) - added for my personal
sanity.
1993-07-15 17:53:14 +00:00
Rodney W. Grimes
5b81b6b301 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00