Commit Graph

92 Commits

Author SHA1 Message Date
Stephen McConnell
32b0a21e43 Use real values to calculate Max I/O size instead of guessing.
Reviewed by:	ken, scottl
Approved by:	ken, scottl, ambrisko (mentors)
MFC after:	3 days
Differential Revision:	https://reviews.freebsd.org/D7043
2016-07-12 19:34:10 +00:00
Stephen McConnell
f4e69c98fd - No log bit in IOCStatus and endian-safe changes.
Use MPI2_IOCSTATUS_MASK when checking IOCStatus to mask off the log bit, and
make a few more things endian-safe.

- Fix possible use of invalid pointer.

It was possible to use an invalid pointer to get the target ID value. To fix
this, initialize a local Target ID variable to an invalid value and change that
variable to a valid value only if the pointer to the Target ID is not NULL.

- No need to set the MPSSAS_SHUTDOWN flag because it's never used.

- done_ccb pointer can be used if it is NULL.

To prevent this, move check for done_ccb == NULL to before done_ccb is used in
mpssas_stop_unit_done().

- Disks can go missing until a reboot is done in some cases.

This is due to the DevHandle not being released, which causes the Firmware to
not allow that disk to be re-added.

Reviewed by:	ken
Approved by:	re (gjb), ken, scottl, ambrisko (mentors)
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D6872
2016-06-20 18:14:51 +00:00
Edward Tomasz Napierala
6db37b5649 Remove NULL checks after M_WAITOK allocations from mps(4).
Reviewed by:	asomers@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D6296
2016-05-10 14:57:14 +00:00
Alan Somers
6adfa7edf0 mpr(4) and mps(4) shouldn't indefinitely retry for "terminated ioc" errors
Submitted by:	ken
Reviewed by:	slm
MFC after:	4 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D6210
2016-05-05 15:32:47 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Pedro F. Giffuni
d9c9c81c08 sys: use our roundup2/rounddown2() macros when param.h is available.
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.

This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
2016-04-21 19:57:40 +00:00
Scott Long
ee5c196b0a Add sysctls for dumping out the device mapping tables. I'm finding this
useful for debugging device-target translation bugs.

MFC after:	3 days
Sponsored by:	Netflix
2016-02-04 23:38:55 +00:00
Marcelo Araujo
bfa3cf970f Clean up unused-but-set-variable spotted by gcc-4.9.
Reviewed by:	mav, slm
Approved by:	rodrigc (mentor)
MFC after:	2 weeks
Sponsored by:	gandi.net
2016-02-01 02:31:59 +00:00
Alan Somers
a92fe02768 Don't retry SAS commands in response to protocol errors
sys/dev/mpr/mpr_sas_lsi.c
sys/dev/mps/mps_sas_lsi.c
	When mp[rs]sas_get_sata_identify returns
	MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR, don't bother retrying. Protocol
	errors aren't likely to be fixed by sleeping.

	Without this change, a system that generated may protocol errors due
	to signal integrity issues was taking more than an hour to boot, due
	to all the retries.

Reviewed by:	slm
MFC after:	4 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D4553
2015-12-14 19:40:47 +00:00
Scott Long
acb570cf14 Revert an extra hunk that crept into the last commit.
Submitted by:	emax
Obtained from:	Netflix, Inc.
MFC after:	3 days
2015-10-16 20:18:12 +00:00
Scott Long
d0be3479d5 Remove _FreeBSD_version check for something that was only an issue with
9-CURRENT.

Obtained from:  Netlfix, Inc
MFC after:      3 days
2015-10-16 17:56:43 +00:00
Scott Long
ac7d1ed24c Remove mps_request_polled(), it's redundant to mps_wait_command()
Obtained from:	Netflix, Inc.
2015-08-10 09:02:34 +00:00
Scott Long
44f2b87692 Remove some unused code.
Obtained from:	Netflix, Inx.
2015-08-10 08:57:34 +00:00
Stephen McConnell
b256e37b8e This setting of stop_at_shutdown should have been removed with r279253
Approved by:	ken
MFC after:	1 week
2015-03-06 16:17:08 +00:00
Kenneth D. Merry
6c0541fa8e Add FreeBSD stable/10 version checks for the availability of the
CDAI_FLAG_NONE advanced information CCB flag.

Support for the flag was merged to stable/10 in r279329, and the
__FreeBSD_version in stable/10 was bumped to 1001510.

Check for that version in the mps(4) and mpr(4) drivers when determining
whether to use the flag.

Sponsored by:	Spectra Logic
MFC after:	3 days
2015-02-26 22:22:06 +00:00
Stephen McConnell
ef065d89e9 - Updated all files with 2015 Avago copyright, and updated LSI's copyright
dates.

- Changed all of the PCI device strings from LSI to Avago Technologies (LSI).

- Added a sysctl variable to control how StartStopUnit behavior works. User can
  select to spin down disks based on if disk is SSD or HDD.

- Inquiry data is required to tell if a disk will support SSU at shutdown or
  not. Due to the addition of mpssas_async, which gets Advanced Info but not
  Inquiry data, the setting of supports_SSU was moved to the
  mpssas_scsiio_complete function, which snoops for any Inquiry commands. And,
  since disks are shutdown as a target and not a LUN, this process was
  simplified by basing it on targets and not LUNs.

- Added a sysctl variable that sets the amount of time to retry after sending a
  failed SATA ID command. This helps with some bad disks and large disks that
  require a lot of time to spin up. Part of this change was to add a callout to
  handle timeouts with the SATA ID command. The callout function is called
  mpssas_ata_id_timeout(). (Fixes PR 191348)

- Changed the way resets work by allowing I/O to continue to devices that are
  not currently under a reset condition. This uses devq's instead of simq's and
  makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function
  called mpssas_prepare_tm().

- Some changes were made to reduce code duplication when getting a SAS address
  for a SATA disk.

- Fixed some formatting and whitespace.

- Bump version of mps driver to 20.00.00.00-fbsd

PR:		191348
Reviewed by:	ken, scottl
Approved by:	ken, scottl
MFC after:	2 weeks
2015-02-24 22:07:42 +00:00
Kenneth D. Merry
e8577fb489 Make sure that the flags for the XPT_DEV_ADVINFO CCB are initialized
properly.

If there is garbage in the flags field, it can sometimes include a
set CDAI_FLAG_STORE flag, which may cause either an error or
perhaps result in overwriting the field that was intended to be
read.

sys/cam/cam_ccb.h:
	Add a new flag to the XPT_DEV_ADVINFO CCB, CDAI_FLAG_NONE,
	that callers can use to set the flags field when no store
	is desired.

sys/cam/scsi/scsi_enc_ses.c:
	In ses_setphyspath_callback(), explicitly set the
	XPT_DEV_ADVINFO flags to CDAI_FLAG_NONE when fetching the
	physical path information.  Instead of ORing in the
	CDAI_FLAG_STORE flag when storing the physical path, set
	the flags field to CDAI_FLAG_STORE.

sys/cam/scsi/scsi_sa.c:
	Set the XPT_DEV_ADVINFO flags field to CDAI_FLAG_NONE when
	fetching extended inquiry information.

sys/cam/scsi/scsi_da.c:
	When storing extended READ CAPACITY information, set the
	XPT_DEV_ADVINFO flags field to CDAI_FLAG_STORE instead of
	ORing it into a field that isn't initialized.

sys/dev/mpr/mpr_sas.c,
sys/dev/mps/mps_sas.c:
	When fetching extended READ CAPACITY information, set the
	XPT_DEV_ADVINFO flags field to CDAI_FLAG_NONE instead of
	setting it to 0.

sbin/camcontrol/camcontrol.c:
	When fetching a device ID, set the XPT_DEV_ADVINFO flags
	field to CDAI_FLAG_NONE instead of 0.

sys/sys/param.h:
	Bump __FreeBSD_version to 1100061 for the new XPT_DEV_ADVINFO
	CCB flag, CDAI_FLAG_NONE.

Sponsored by:	Spectra Logic
MFC after:	1 week
2015-02-18 18:30:19 +00:00
Scott Long
fcafcbcb6f Fix the ioctl interface to properly support fetching the header of regular
and extended config pages.

Obtained from:	Netflix, Inc.
MFC after:	3 days
2015-01-25 22:29:23 +00:00
Steven Hartland
85c9dd9d89 Prevent overflow issues in timeout processing
Previously, any timeout value for which (timeout * hz) will overflow the
signed integer, will give weird results, since callout(9) routines will
convert negative values of ticks to '1'. For unsigned integer overflow we
will get sufficiently smaller timeout values than expected.

Switch from callout_reset, which requires conversion to int based ticks
to callout_reset_sbt to avoid this.

Also correct isci to correctly resolve ccb timeout.

This was based on the original work done by Eygene Ryabinkin
<rea@freebsd.org> back in 5 Aug 2011 which used a macro to help avoid
the overlow.

Differential Revision:	https://reviews.freebsd.org/D1157
Reviewed by:	mav, davide
MFC after:	1 month
Sponsored by:	Multiplay
2014-11-21 21:01:24 +00:00
Hans Petter Selasky
f0188618f2 Fix multiple incorrect SYSCTL arguments in the kernel:
- Wrong integer type was specified.

- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.

- Logical OR where binary OR was expected.

- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.

- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.

- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.

- Updated "EXAMPLES" section in SYSCTL manual page.

MFC after:	3 days
Sponsored by:	Mellanox Technologies
2014-10-21 07:31:21 +00:00
Steven Hartland
e248a3d1f6 Bring in LSI's phase19 changes
* Removed unused mpssas_discovery_timeout function.
* Don't alter mapping boundaries if not raid firmware.
* Check free_busaddr instead of post_busaddr (diff minimisation really)

MFC after:	2 weeks
2014-07-30 18:21:06 +00:00
Steven Hartland
7571e7f64a Bring in LSI's phase16 - phase18 changes
* Implements Start Stop Unit for SATA direct-attach devices in IR mode to avoid
  data corruption.
* Use CAM_DEV_NOT_THERE instead of CAM_SEL_TIMEOUT and CAM_TID_INVALID

Obtained from:	LSI
MFC after:	2 weeks
2014-07-30 17:58:17 +00:00
Scott Long
9b6ea4e794 Don't overload the CCB status field within the driver.
Obtained from:	Netflix, Inc.
MFC after:	2 days
2014-07-01 10:51:20 +00:00
Scott Long
601781ccc3 Add accessor functions for manipulating the CAM CCB status field.
Reviewed by:	gibbs
Obtained from:	Netflix, Inc
MFC after:	2 days
2014-07-01 04:44:18 +00:00
Scott Long
b7f7712702 Refactor some code in mps.c to reduce header pollution.
Reviewed by:	gibbs
Obtained from:	Netflix, Inc.
MFC after:	2 days
2014-07-01 04:33:36 +00:00
Alexander Motin
c2a0f07a10 Increase taskqueue thread priority from idle to PRIBIO.
Idle priority is not even time-share, so if system is busy in any way,
those events may never be executed.  Since in some cases system waits
for events processed by that thread, that may cause deadlocks.
2014-05-24 13:00:49 +00:00
Kenneth D. Merry
d2b4e18b21 Fix TLR (Transport Layer Retry) support in the mps(4) and mpr(4) drivers.
TLR is necessary for reliable communication with SAS tape drives.

This was broken by change 246713 in the mps(4) driver.  It changed the
cm_data field for SCSI I/O requests to point to the CCB instead of the data
buffer.  So, instead, look at the CCB's data pointer to determine whether
or not we're talking to a tape drive.

Also, take the residual into account to make sure that we don't go off the
end of the request.

MFC after:	3 days
Sponsored by:	Spectra Logic Corporation
2014-05-08 20:28:22 +00:00
Scott Long
0823577306 Add some assertions to ensure that the target array doesn't get accessed
out of bounds.

Obtained from:	Netflix, Inc.
MFC after:	3 days
2014-04-07 15:13:24 +00:00
Alexander Motin
37b8d8c41c Restore SIM freeze/release match, broken at r253549.
This fixes problem with SIM left in frozen state after reinit, for example,
after firmware update.

MFC after:	1 week
2014-02-27 21:48:34 +00:00
Alexander Motin
ec3dd42625 Pass proper pointer to bus_dmamem_free() in mps_iocfacts_free().
Passing there pointer into the middle of allocated area caused kernel
panic during reinit, for example, after firmware upgrade.

MFC after:	1 week
2014-02-27 11:34:26 +00:00
Nathan Whitehorn
123055f01f Adjust various SCSI drivers to handle either a 32-bit or 64-bit lun_id_t,
mostly by adjustments to debugging printf() format specifiers. For high
numbered LUNs, also switch to printing them in hex as per SAM-5.

MFC after: 2 weeks
2013-10-30 14:04:47 +00:00
Kenneth D. Merry
cd04f04fb5 Fix an issue that caused Integrated RAID volumes on LSI mps(4) controllers
to not get scanned on boot.

The problem originated in change 253549.  With the change to the mps(4)
driver to scan only targets that it knows it has (as opposed to scanning
the entire bus), scanning RAID volumes on boot was omitted.

So, for versions of FreeBSD that have the scanning changes
(__FreeBSD_version 1000039 and higher), scan RAID volumes that are added
whether or not we're booting.

PR:		kern/181784
Reported by:	Xiguang Wang <kurapica@gmail.com>
Tested by:	Dennis Glatting <dg@pki2.com>
Sponsored by:	Spectra Logic
Approved by:	re (delphij)
MFC After:	3 days
2013-09-12 22:06:12 +00:00
Kenneth D. Merry
ec99409e7e Fix mps(4) driver breakage that came in in change 253550 that
manifested itself in out of chain frame conditions.

When the driver ran out of chain frames, the request in question
would get completed early, and go through mpssas_scsiio_complete().

In mpssas_scsiio_complete(), the negation of the CAM status values
(CAM_STATUS_MASK | CAM_SIM_QUEUED) was ORed in instead of being
ANDed in.  This resulted in a bogus CAM CCB status value.  This
didn't show up in the non-error case, because the status was reset
to something valid (e.g. CAM_REQ_CMP) later on in the function.

But in the error case, such as when the driver ran out of chain
frames, the CAM_REQUEUE_REQ status was ORed in to the bogus status
value.  This led to the CAM transport layer repeatedly releasing
the SIM queue, because it though that the CAM_RELEASE_SIMQ flag had
been set.  The symptom was messages like this on the console when
INVARIANTS were enabled:

xpt_release_simq: requested 1 > present 0
xpt_release_simq: requested 1 > present 0
xpt_release_simq: requested 1 > present 0

mps_sas.c:	In mpssas_scsiio_complete(), use &= to take status
		bits out.  |= adds them in.

		In the error case in mpssas_scsiio_complete(), set
		the status to CAM_REQUEUE_REQ, don't OR it in.

MFC after:	3 days
Sponsored by:	Spectra Logic
2013-08-21 21:30:56 +00:00
Scott Long
c68534f1d5 Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI
command register.  The lazy BAR allocation code in FreeBSD sometimes
disables this bit when it detects a range conflict, and will re-enable
it on demand when a driver allocates the BAR.  Thus, the bit is no longer
a reliable indication of capability, and should not be checked.  This
results in the elimination of a lot of code from drivers, and also gives
the opportunity to simplify a lot of drivers to use a helper API to set
the busmaster enable bit.

This changes fixes some recent reports of disk controllers and their
associated drives/enclosures disappearing during boot.

Submitted by:	jhb
Reviewed by:	jfv, marius, achadd, achim
MFC after:	1 day
2013-08-12 23:30:01 +00:00
Alexander Motin
fe97b88c15 Add brace missing in r254253. 2013-08-12 20:17:37 +00:00
Scott Long
32373512c3 r253460 accidentally some moderately expensive debugging code, even
when debugging isn't enabled.  Work around this.

Submitted by:	mav
Obtained from:	Netflix
MFC after:	3 days
2013-08-12 19:16:55 +00:00
Scott Long
fe8391035a Rate limit the 'out of chain frame' messages to once per 60 seconds.
Obtained from:	Netflix
MFC after:	3 days
2013-08-09 01:10:33 +00:00
Scott Long
d9802deb4e Sometimes a device misbehaves so badly that it disrupts the entire system.
Add a tunable that allows such a device to be excluded from the driver.
The id parameter is the target id that the driver assigns to a given device.

dev.mps.X.exclude_ids=<id>,<id>

Obtained from:	Netflix
MFC after:	3 days
2013-08-09 01:09:02 +00:00
Scott Long
7263f45e6f Fix a printf typo.
Obtained from:	LSI
2013-07-30 17:35:06 +00:00
Kenneth D. Merry
9b91b192fb Merge in phase 14+ -> 16 mps driver fixes from LSI:
---------------------------------------------------------------
System panics during a Port reset with ouststanding I/O
---------------------------------------------------------------
It is possible to call mps_mapping_free_memory after this
memory is already freed, causing a panic. Removed this extra
call to mps_mappiing_free_memory and call mps_mapping_exit
in place of the mps_mapping_free_memory call so that any
outstanding mapping items can be flushed before memory is
freed.

---------------------------------------------------------------
Correct memory leak during a Port reset with ouststanding I/O
---------------------------------------------------------------
In mps_reinit function, the mapping memory was not being
freed before being re-allocated. Added line to call the
memory free function for mapping memory.

---------------------------------------------------------------
Use CAM_SIM_QUEUED flag in Driver IO path.
---------------------------------------------------------------
This flag informs the XPT that successful abort of a CCB
requires an abort ccb to be issued to the SIM.  While
processing SCSI IO's, set the CAM_SIM_QUEUED flag in the
status for the IO. When the command completes, clear this
flag.

---------------------------------------------------------------
Check for CAM_REQ_INPROG in I/O path.
---------------------------------------------------------------
Added a check in mpssas_action_scsiio for the In Progress
status for the IO. If this flag is set, the IO has already
been aborted by the upper layer (before CAM_SIM_QUEUED was
set) and there is no need to send the IO. The request will
be completed without error.

---------------------------------------------------------------
Improve "doorbell handshake method" for mps_get_iocfacts
---------------------------------------------------------------
Removed call to get Port Facts since this information is
not used currently.

Added mps_iocfacts_allocate function to allocate memory
that is based on IOC Facts data.  Added mps_iocfacts_free
function to free memory that is based on IOC Facts data.
Both of the functions are used when a Diag Reset is performed
or when the driver is attached/detached. This is needed in
case IOC Facts changes after a Diag Reset, which could
happen if FW is upgraded.

Moved call of mps_bases_static_config_pages from the attach
routine to after the IOC is ready to process accesses based
on the new memory allocations (instead of polling through
the Doorbell).

---------------------------------------------------------------
Set TimeStamp in INIT message in millisecond format Set the IOC
---------------------------------------------------------------

---------------------------------------------------------------
Prefer mps_wait_command to mps_request_polled
---------------------------------------------------------------
Instead of using mps_request_polled, call mps_wait_command
whenever possible. Change the mps_wait_command function to
check the current context and either use interrupt context
or poll if required by using the pause or DELAY function.
Added a check after waiting 50mSecs to see if the command
has timed out. This is only done if polliing, the msleep
command will automatically timeout if the command has taken
too long to complete.

---------------------------------------------------------------
Integrated RAID: Volume Activation Failed error message is
displayed though the volume has been activated.
---------------------------------------------------------------
Instead of failing an IOCTL request that does not have a
large enough buffer to hold the complete reply, copy as
much data from the reply as possible into the user's buffer
and log a message saying that the user's buffer was smaller
than the returned data.

---------------------------------------------------------------
mapping_add_new_device failure due to persistent table FULL
---------------------------------------------------------------
When a new device is added, if it is determined that the
device persistent table is being used and is full, instead
of displaying a message for this condition every time, only
log a message if the MPS_INFO bit is set in the debug_flags.

Submitted by:	LSI
MFC after:	1 week
2013-07-22 18:41:53 +00:00
Kenneth D. Merry
b01773b0f1 CAM and mps(4) driver scanning changes.
Add a PIM_NOSCAN flag to the CAM path inquiry CCB.  This tells CAM
not to perform a rescan on a bus when it is registered.

We now use this flag in the mps(4) driver.  Since it knows what
devices it has attached, it is more efficient for it to just issue
a target rescan on the targets that are attached.

Also, remove the private rescan thread from the mps(4) driver in
favor of the rescan thread already built into CAM.  Without this
change, but with the change above, the MPS scanner could run before
or during CAM's initial setup, which would cause duplicate device
reprobes and announcements.

sys/param.h:
	Bump __FreeBSD_version to 1000039 for the inclusion of the
	PIM_RESCAN CAM path inquiry flag.

sys/cam/cam_ccb.h:
sys/cam/cam_xpt.c:
	Added a PIM_NOSCAN flag.  If a SIM sets this in the path
	inquiry ccb, then CAM won't rescan the bus in
	xpt_bus_regsister.

sys/dev/mps/mps_sas.c
	For versions of FreeBSD that have the PIM_NOSCAN path
	inquiry flag, don't freeze the sim queue during scanning,
	because CAM won't be scanning this bus.  Instead, hold
	up the boot.  Don't call mpssas_rescan_target in
	mpssas_startup_decrement; it's redundant and I don't
	know why it was in there.

	Set PIM_NOSCAN in path inquiry CCBs.

	Remove methods related to the internal rescan daemon.

	Always use async events to trigger a probe for EEDP support.
	In older versions of FreeBSD where AC_ADVINFO_CHANGED is
	not available, use AC_FOUND_DEVICE and issue the
	necessary READ CAPACITY manually.

	Provide a path to xpt_register_async() so that we only
	receive events for our own SCSI domain.

	Improve error reporting in cases where setup for EEDP
	detection fails.

sys/dev/mps/mps_sas.h:
	Remove softc flags and data related to the scanner thread.

sys/dev/mps/mps_sas_lsi.c:
	Unconditionally rescan the target whenever a device is added.

Sponsored by:	Spectra Logic
MFC after:	1 week
2013-07-22 18:37:07 +00:00
Scott Long
1610f95c56 Overhaul error, information, and debug logging.
Obtained from:	Netflix
MFC after:	3 days
2013-07-19 00:12:41 +00:00
Alan Somers
2ce303e83d sys/dev/mps/mps.c
sys/dev/mps/mps_user.c
	Fix uninitialized memory reference in mps_read_config_page.  It was
	referencing a field (params->hdr.Ext.ExtPageType) that would only be
	set when reading an Extended config page.  The symptom was that
	MPSIO_READ_CFG_PAGE ioctls would randomly fail with
	MPI2_IOCSTATUS_CONFIG_INVALID_PAGE errors.  The solution is to
	determine whether an extended or an ordinary config page is requested
	by looking at the PageType field, which should be available regardless.

	Similarly, mps_user_read_extcfg_header and mps_user_read_extcfg_page,
	which call mps_read_config_page, had to be fixed to always set the
	PageType field.  They were implicitly assuming that
	mps_read_config_page always operated on Extended pages.

Reviewed by:	ken
Approved by:	ken (mentor)
MFC after:	3 days
2013-06-04 22:32:33 +00:00
Alexander Motin
ee6b37b56b Fix NULL-dereference kernel panic in case of mps_attach() failure.
MFC after:	1 week
2013-05-22 02:15:07 +00:00
Steven Hartland
5d0b98f2c3 Fix uninitialized warning in mps
Reviewed by:	pjd (mentor)
Approved by:	pjd (mentor)
MFC after:	2 weeks
2013-05-03 10:37:59 +00:00
Alexander Motin
e5dfa058da MFprojects/camlock r248982:
Stop abusing xpt_periph in random plases that really have no periph related
to CCB, for example, bus scanning.  NULL value is fine in such cases and it
is correctly logged in debug messages as "noperiph".  If at some point we
need some real XPT periphs (alike to pmpX now), quite likely they will be
per-bus, and not a single global instance as xpt_periph now.
2013-04-14 09:55:48 +00:00
Alexander Motin
47bf7bcb97 Except one case mps(4) driver does not touch the data and works well with
unmapped I/O.  That one exception is access to INQUIRY VPD request result.
Those requests are never unmapped now, but to be safe add respective check
there and allow unmapped I/O for the SIM by setting PIM_UNMAPPED flag.
2013-03-28 11:24:30 +00:00
John Baldwin
f9379dc411 Replace the TDP_NOSLEEPING flag with a counter so that the
THREAD_NO_SLEEPING() and THREAD_SLEEPING_OK() macros can nest.

Reviewed by:	attilio
2013-03-01 22:03:31 +00:00
Konstantin Belousov
dd0b4fb6d5 Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c.  It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code.  The MD busdma is then given a chance to do any final processing
in the complete() callback.

The cam changes unify the bus_dmamap_load* handling in cam drivers.

The arm and mips implementations are updated to track virtual
addresses for sync().  Previously this was done in a type specific
way.  Now it is done in a generic way by recording the list of
virtuals in the map.

Submitted by:	jeff (sponsored by EMC/Isilon)
Reviewed by:	kan (previous version), scottl,
	mjacob (isp(4), no objections for target mode changes)
Discussed with:	     ian (arm changes)
Tested by:	marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
	amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)
2013-02-12 16:57:20 +00:00
Eitan Adler
db702c59cf remove duplicate semicolons where possible.
Approved by:	cperciva
MFC after:	1 week
2012-10-22 03:00:37 +00:00