SIGCHLD signal, should keep full 32 bits of the status passed to the
_exit(2).
Split the combined p_xstat of the struct proc into the separate exit
status p_xexit for normal process exit, and signalled termination
information p_xsig. Kernel-visible macro KW_EXITCODE() reconstructs
old p_xstat from p_xexit and p_xsig. p_xexit contains complete status
and copied out into si_status.
Requested by: Joerg Schilling
Reviewed by: jilles (previous version), pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
This obviates the need for a MNTK_SUSPENDABLE flag, since passthrough
filesystems like nullfs and unionfs no longer need to inherit this
information from their lower layer(s). This change also restores the
pre-r273336 behaviour of using the presence of a susp_clean VFS method to
request suspension support.
Reviewed by: kib, mjg
Differential Revision: https://reviews.freebsd.org/D2937
the kernel would generate a bogus one with a ":/<path>" suffix.
This would only occur for the case where there was no explicit
"principal" argument and the getaddrinfo() call in mount_nfs.c failed to a
return a cannonical name for the server.
This patch fixes this unusual case.
PR: 201073
Submitted by: masato@itc.naist.jp
MFC after: 2 weeks
compared to the old NFS client via email to the freebsd-fs@ mailing list.
For the new client, when multiple clients attempted to create a symbolic
link concurrently, more that one client would report success instead of
EEXIST. This was caused by code in the new client that mapped EEXIST to
OK assuming it was caused by a retried RPC request.
Since the old client did not do this, the patch defaults to the old
behaviour and permits the new behaviour to be enabled via a sysctl.
Reported by: alex.burlyga.ietf@gmail.com
Tested by: alex.burlyga.ietf@gmail.com
MFC after: 2 weeks
* GENERAL
- Update copyright.
- Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set
neither to ON, which means we want Fortuna
- If there is no 'device random' in the kernel, there will be NO
random(4) device in the kernel, and the KERN_ARND sysctl will
return nothing. With RANDOM_DUMMY there will be a random(4) that
always blocks.
- Repair kern.arandom (KERN_ARND sysctl). The old version went
through arc4random(9) and was a bit weird.
- Adjust arc4random stirring a bit - the existing code looks a little
suspect.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Redo read_random(9) so as to duplicate random(4)'s read internals.
This makes it a first-class citizen rather than a hack.
- Move stuff out of locked regions when it does not need to be
there.
- Trim RANDOM_DEBUG printfs. Some are excess to requirement, some
behind boot verbose.
- Use SYSINIT to sequence the startup.
- Fix init/deinit sysctl stuff.
- Make relevant sysctls also tunables.
- Add different harvesting "styles" to allow for different requirements
(direct, queue, fast).
- Add harvesting of FFS atime events. This needs to be checked for
weighing down the FS code.
- Add harvesting of slab allocator events. This needs to be checked for
weighing down the allocator code.
- Fix the random(9) manpage.
- Loadable modules are not present for now. These will be re-engineered
when the dust settles.
- Use macros for locks.
- Fix comments.
* src/share/man/...
- Update the man pages.
* src/etc/...
- The startup/shutdown work is done in D2924.
* src/UPDATING
- Add UPDATING announcement.
* src/sys/dev/random/build.sh
- Add copyright.
- Add libz for unit tests.
* src/sys/dev/random/dummy.c
- Remove; no longer needed. Functionality incorporated into randomdev.*.
* live_entropy_sources.c live_entropy_sources.h
- Remove; content moved.
- move content to randomdev.[ch] and optimise.
* src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h
- Remove; plugability is no longer used. Compile-time algorithm
selection is the way to go.
* src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h
- Add early (re)boot-time randomness caching.
* src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h
- Remove; no longer needed.
* src/sys/dev/random/uint128.h
- Provide a fake uint128_t; if a real one ever arrived, we can use
that instead. All that is needed here is N=0, N++, N==0, and some
localised trickery is used to manufacture a 128-bit 0ULLL.
* src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h
- Improve unit tests; previously the testing human needed clairvoyance;
now the test will do a basic check of compressibility. Clairvoyant
talent is still a good idea.
- This is still a long way off a proper unit test.
* src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h
- Improve messy union to just uint128_t.
- Remove unneeded 'static struct fortuna_start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
* src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h
- Improve messy union to just uint128_t.
- Remove unneeded 'staic struct start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
- Fix some magic numbers elsewhere used as FAST and SLOW.
Differential Revision: https://reviews.freebsd.org/D2025
Reviewed by: vsevolod,delphij,rwatson,trasz,jmg
Approved by: so (delphij)
dup entry, upon detach from the parent directory. If the node is
renamed, the entry is re-attached at the different directory, and
invalud cookie value triggers assert (or corrupts directory rb tree,
it seems).
Reported by: clusteradm (gjb, antoine)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
o Provide an extensive set of assertions for input array of pages.
o Remove now duplicate assertions from different pagers.
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
in the requested array, then it is responsible for disposition of previous
page and is responsible for updating the entry in the requested array.
Now consumers of KPI do not need to re-lookup the pages after call to
vm_pager_get_pages().
Reviewed by: kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Use the same scheme implemented to manage credentials.
Code needing to look at process's credentials (as opposed to thred's) is
provided with *_proc variants of relevant functions.
Places which possibly had to take the proc lock anyway still use the proc
pointer to access limits.
- MNTK_SUSPENDABLE is set in mnt_kern_flag, not mnt_flag.
- The lower layer of a unionfs mount is read-only, so the mount should
be suspendable iff the upper layer is suspendable.
- Remove a couple of superfluous comments.
Differential Revision: https://reviews.freebsd.org/D2714
Reviewed by: kib, mjg
logic is now placed in the mmap hook implementation rather than requiring
it to be placed in sys/vm/vm_mmap.c. This hook allows new file types to
support mmap() as well as potentially allowing mmap() for existing file
types that do not currently support any mapping.
The vm_mmap() function is now split up into two functions. A new
vm_mmap_object() function handles the "back half" of vm_mmap() and accepts
a referenced VM object to map rather than a (handle, handle_type) tuple.
vm_mmap() is now reduced to converting a (handle, handle_type) tuple to a
a VM object and then calling vm_mmap_object() to handle the actual mapping.
The vm_mmap() function remains for use by other parts of the kernel
(e.g. device drivers and exec) but now only supports mapping vnodes,
character devices, and anonymous memory.
The mmap() system call invokes vm_mmap_object() directly with a NULL object
for anonymous mappings. For mappings using a file descriptor, the
descriptors fo_mmap() hook is invoked instead. The fo_mmap() hook is
responsible for performing type-specific checks and adjustments to
arguments as well as possibly modifying mapping parameters such as flags
or the object offset. The fo_mmap() hook routines then call
vm_mmap_object() to handle the actual mapping.
The fo_mmap() hook is optional. If it is not set, then fo_mmap() will
fail with ENODEV. A fo_mmap() hook is implemented for regular files,
character devices, and shared memory objects (created via shm_open()).
While here, consistently use the VM_PROT_* constants for the vm_prot_t
type for the 'prot' variable passed to vm_mmap() and vm_mmap_object()
as well as the vm_mmap_vnode() and vm_mmap_cdev() helper routines.
Previously some places were using the mmap()-specific PROT_* constants
instead. While this happens to work because PROT_xx == VM_PROT_xx,
using VM_PROT_* is more correct.
Differential Revision: https://reviews.freebsd.org/D2658
Reviewed by: alc (glanced over), kib
MFC after: 1 month
Sponsored by: Chelsio
When providing memory map information to userland, populate the vnode pointer
for tmpfs files. Set the memory mapping to appear as a vnode type, to match
FreeBSD 9 behavior.
This fixes the use of tmpfs files with the dtrace pid provider,
procstat -v, procfs, linprocfs, pmc (pmcstat), and ptrace (PT_VM_ENTRY).
Submitted by: Eric Badger <eric@badgerio.us> (initial revision)
Obtained from: Dell Inc.
PR: 198431
MFC after: 2 weeks
Reviewed by: jhb
Approved by: kib (mentor)
Merge the filesystem specific part from r274914 to ext2fs.
I only did regular testing with the change but UFS and our ext2fs
are similar enough that the code should just work with the new
sendfile.
Discussed with: glebius
No appreciable change in performance was observed after increasing
the sizes of these tables and then testing with a single client.
However, there was an email that indicated high CPU overheads for
a heavily loaded NFSv4 and it is hoped that increasing the sizes
of the hash tables via these tunables might help.
The tables remain the same size by default.
Differential Revision: https://reviews.freebsd.org/D2596
MFC after: 2 weeks
limits in the code which is deep in the call stack, and owns several
critical system resources, like vnode locks. Attempt to wait while
the per-mount softupdate thread cleans up the backlog may deadlock,
because the thread might need to lock the same vnode which is owned by
the waiting thread.
Instead of synchronously waiting for the worker, perform the worker'
tickle and pause until the backlog is cleaned, at the safe point
during return from kernel to usermode. A new ast request to call
softdep_ast_cleanup() is created, the SU code now only checks the size
of queue and schedules ast.
There is no ast delivery for the kernel threads, so they are exempted
from the mechanism, except NFS daemon threads. NFS server loop
explicitely checks for the request, and informs the schedule_cleanup()
that it is capable of handling the requests by the process P2_AST_SU
flag. This is needed because nfsd may be the sole cause of the SU
workqueue overflow. But, to not cause nsfd to spawn additional
threads just because we slow down existing workers, only tickle su
threads, without waiting for the backlog cleanup.
Reviewed by: jhb, mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
so that it would not return less data than requested.
Since returning less directory data than requested is not a problem
for FreeBSD and even UFS no longer returns directory structures
with d_fileno == 0, this patch stops the client from doing this.
Although entries with d_fileno == 0 should not be a problem,
the man pages no longer document that these entries should be
ignored, so there was a concern that these entries might be an
issue in the future.
Suggested by: trasz
Tested by: trasz
MFC after: 2 weeks
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
tracing. This matches the behavior of ptrace(PT_ATTACH). Also,
the procfs detach request assumes p_oppid is always set.
Reviewed by: kib
MFC after: 2 weeks
that are not an exact multiple of DIRBLKSIZ correctly. Fortunately
readdir(3) always uses an exact multiple of DIRBLKSIZ, so few applications
were affected. This patch fixes this problem by reducing the size
of the directory read to an exact multiple of DIRBLKSIZ.
Tested by: trasz
Reported by: trasz
Reviewed by: trasz
MFC after: 2 weeks
Present implementation of large sync writes is too strict and so can be
quite slow. Instead of doing that, execute large async write in chunks,
syncing each chunk separately.
It would be good to fix large sync writes too, but I leave it to somebody
with more skills in this area.
Reviewed by: rmacklem
MFC after: 1 week
largest size for a buffer in the buffer cache. This patch
defines a new constant MAXBCACHEBUF, which is the largest
size for a buffer in the buffer cache. Having a separate
constant allows MAXBCACHEBUF to be set larger than MAXBSIZE
on a per-architecture basis, so that NFS can do larger read/writes
for these architectures. It modifies sys/param.h so that BKVASIZE
can also be set on a per-architecture basis.
A couple of cases where NFS used MAXBSIZE instead of NFS_MAXBSIZE
is fixed as well.
Differential Revision: https://reviews.freebsd.org/D2330
Reviewed by: mav, kib
MFC after: 2 weeks
This is similar to r281756 so set the ptr NULL after free as a safety belt
against future changes.
Obtained from: HardenedBSD (b2e77ced9ae213d358b44d98f552d9ae4636ecac)
Submitted by: Oliver Pinter
Revewed by: rmacklem
The htree directory index is a highly desirable feature for research
purposes and was meant to improve performance in our ext2/3 driver.
Unfortunately our implementation has two problems:
- It never really delivered any performance improvement.
- It appears to corrupt the filesystem in undetermined circumstances.
Strictly speaking dir_index is not required for read/write support in
ext2/3 and our limited ext4 support still works fine without it.
Regain stability in the ext2 driver by removing it. We may need it back
(fixed) if we want to support encrypted ext4 support but thanks to the
wonders of version control we can always revert this change and bring it
back.
PR: 191895
PR: 198731
PR: 199309
MFC after: 5 days
can perform better when using a 128K read/write data size.
This patch changes NFS_MAXDATA from 64K to 128K so that
clients can use 128K for NFS mounts to allow this.
The patch also renames NFS_MAXDATA to NFS_SRVMAXIO so
that it is clear that it applies to the NFS server side
only. It also avoids a name conflict with the NFS_MAXDATA
defined in rpcsvc/nfs_prot.h, that is used for userland RPC.
Tested by: mav
Reviewed by: mav
MFC after: 2 weeks
use VOP_FSYNC() to perform the NFS server's Commit operation.
This patch adds a mnt_kern_flag called MNTK_USES_BCACHE which
is set by file systems that use the buffer cache. If this flag
is not set, the NFS server always does a VOP_FSYNC().
This should be ok for old file system modules that do not set
MNTK_USES_BCACHE, since calling VOP_FSYNC() is correct, although
it might not be optimal for file systems that use the buffer cache.
Reviewed by: kib
MFC after: 2 weeks
For VREG vnodes, return the resident page count (multiplied by PAGE_SIZE)
for the tmpfs node's anonymous VM object that stores actual file contents.
For all other vnodes, return the tmpfs_node's tn_size, which should not
be rounded to a page.
This change allows using stat(2) to identify a sparse file on tmpfs.
Reviewed by: kib
MFC after: 1 week
on reads or writes, the time marks are used to display idle time by
w(1) [1]. Instead, use vfs.devfs.dotimes as the selector of default
precision vs. using time_second. The later gives seconds precision,
which is good enough for the purpose.
Note that timestamp updates are unlocked and the updates itself, as
well as the check in devfs_timestamp, are non-atomic.
Noted by: truckman [1]
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The magic number MSDOSFS_ARGSMAGIC, which used to distinguish
"old" vs "new" msdosfs mount arguments, has not been used since
2005; it should just go away now.
Likewise, the local-to-Unicode table that changed at the same
time is unused.
Leave the space reserved in the old style mount arguments, though,
since we still support the old mount call (via the cmount entry
point).
Submitted by: Chris Torek <chris.torek@gmail.com>
MFC after: 2 weeks
Currently we update timestamps unconditionally when doing read or
write operations. This may slow things down on hardware where
reading timestamps is expensive (e.g. HPET, because of the default
vfs.timestamp_precision setting is nanosecond now) with limited
benefit.
A new sysctl variable, vfs.devfs.dotimes is added, which can be
set to non-zero value when the old behavior is desirable.
Differential Revision: https://reviews.freebsd.org/D2104
Reported by: Mike Tancsa <mike sentex net>
Reviewed by: kib
Relnotes: yes
Sponsored by: iXsystems, Inc.
MFC after: 2 weeks
- Allow to call the function with vm object lock held.
- Allow to specify reqpage that doesn't match any page in the region,
meaning freeing all pages.
o Utilize the new function in couple more places in vnode pager.
Reviewed by: alc, kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
error cases. Calling brelse() with a NULL pointer is not allowed,
so only call brelse() when the bp is non-NULL.
Reported by: Maxime Villard (reported as uninitialized variable)
Do not ever return doomed vnode from lookup. This could happen, if
not checked, since dvp is relocked in the 'looking up ourselves' case.
In the other case, since dvp is relocked, mount point might go away
while fdesc_allocvp() is called. Prevent the situation by doing
vfs_busy() before unlocking dvp. Reuse the vn_vget_ino_gen() helper.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
prevent errors from yanking devices out from under filesystems. Only
care about special vnodes on devfs, special nodes on other kinds of
filesystems do not have special properties.
Sponsored by: EMC / Isilon Storage Division
Submitted by: Conrad Meyer
MFC after: 1 week
The e2fs_gd struct was not being initialized and garbage was
being used for hinting the ext2 allocator variant.
Use malloc to clear the values and also initialize e2fs_contigdirs
during allocation to keep consistency.
While here clean up small style issues.
Reported by: Clang static analyser
MFC after: 1 week
