Commit Graph

219 Commits

Author SHA1 Message Date
Matthew N. Dodd
2ff4e76374 Fix the performance problems I caused by setting ifq_maxlen to 8.
Use IFQ_MAXLEN instead.  This seemed like a good idea at the time since
most 3c509s have all of 2k for their TX fifo.  My intention was to revisit
ifq_maxlen and auto-scale it or something.

ttcp-t: 16777216 bytes in 21.53 real seconds = 761.07 KB/sec +++
ttcp-t: 2771 I/O calls, msec/call = 7.96, calls/sec = 128.72
ttcp-t: 0.0user 2.9sys 0:21real 13% 20i+280d 222maxrss 0+2pf 717+0csw

ttcp-r: 16777216 bytes in 14.11 real seconds = 1161.48 KB/sec +++
ttcp-r: 2050 I/O calls, msec/call = 7.05, calls/sec = 145.33
ttcp-r: 0.0user 1.4sys 0:14real 10% 87i+1198d 196maxrss 0+1pf 1949+186csw

I've got some tweaks that move the TX speed up to the RX speed but I've
got to groom them from the mess I've made of my source tree.

Yelled at by:	wpaul
2000-01-12 05:27:08 +00:00
Warner Losh
e9cb811b17 Commit kernel part of patches to get the 3Com OfficeConnect 3CXSH572BT
working on -current.

Submitted by: Eric D. Futch <efutch@nyct.net>
Approved by: mdodd
2000-01-10 02:32:43 +00:00
Warner Losh
5aa701b662 kill debug printf that says detach 1999-12-10 07:24:39 +00:00
Matthew N. Dodd
a4e3d8de0c Add defines for additional EEPROM locations and register definitions. 1999-12-06 09:29:34 +00:00
Matthew N. Dodd
d6eb71ddd5 Whitespace cleanups. 1999-12-06 09:16:13 +00:00
Matthew N. Dodd
8d133d9561 Add a delay (per the databook) to the get_eeprom_data() loop so
that the read EEPROM command has time to execute.

I didn't observe any difference in behavior on my test system but
this is the documented "correct behavior".
1999-12-06 08:59:52 +00:00
Matthew N. Dodd
0613716013 Standardize device descriptions so that there is parity between PnP
descriptions and non-PnP descriptions.
1999-12-06 08:40:59 +00:00
Matthew N. Dodd
94d49d9a35 Correctly implement the non-PnP enumeration of ISA board.
We now correctly skip boards that have PnP support enabled, or are in
test mode.  The 3c509s support a number of combinations of device
probing, as per the databook.

	- ISA only
	- PnP only
	- ISA or PnP

We will allow cards that can be dealt with by PnP to be attached by the
PnP enumerator.

This fixes the bogus detection of boards at weird ioports.
1999-12-06 08:31:47 +00:00
Warner Losh
e09f49b6fa Fix the hang on card eject problem and maybe the hang on suspend
problem.

o Create new timeout routine so we don't detach the card inside a ISR
  but instead drop back to spl0 via a timeout of 0.
o Actually delete the child of the pccard device rather than just faking
  it badly.
o Fix sio, ed and ep to have pccard detach routines that are int rather
  than void.
o Fix ep and ed pccard detach routines to use if_detach rather than just
  if_down.  if_detach destroys the device, while if_down just marks it
  down.  In this incarnation of the pccard things, we map the disable
  the slot action to detach the driver, which removes the driver from the
  device tree.  When that is done, a panic would soon follow as the
  ifconfig tried to down the device.

Didn't fix:
o Should cache the pccard dev child's pointer in struct slot
o remove now unused parts of struct slot
o Any driver using softc after detach has been called.  sio's softc used
  to be statically allocated, so you could check sc->gone, but that is
  now gone.
o Didn't remove gone from softc of drivers that use the old pccard method.

Didn't test:
o ed driver changes
o sio driver changes on pccards
o suspend (no laptop or apm support on my desktop)
1999-12-01 07:38:54 +00:00
Warner Losh
b1ef7ecbc7 Kill unneeded #includes. They were left over from the short period of
time when a strcmp against the device name was required.  Sio patches
sent to peter for review.
1999-11-20 05:16:14 +00:00
Warner Losh
5eafefaf7a Add (untested) support for the 3C562D/3C563D. I have been unable to
test this support since I don't have the dongle for the card in
question and the dongle I have for my 3C589D doesn't seem to work on
it.  I don't know if this is due to the damage I did to the 562 card
in transit from freebsdcon, or a mis-matched dongle...
1999-10-29 06:27:07 +00:00
Warner Losh
c864a1a7e8 Fix identify code. This also fixes the eeprom messages.
pccard attachments must activate the resources they want to access.
ep didn't do this, so of course thee eeprom came back as busy.  ed and
sio already did this.  It was only due to a bug in the logic that the
probe succeeded.  These problems have been fixed.
1999-10-28 06:12:58 +00:00
Warner Losh
806338b15d Last change to pccard_nbk now obviates the need to check the name of
the device in question.
Also fix warnings on if_ep_pccard.c
1999-10-28 05:06:14 +00:00
Matthew N. Dodd
79a9057038 HEADS UP! All 3c5x9 users!
- Rip out all the static softc stuff and do softc allocation the right way.
- Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY
  method to enumerate all non-PnP ISA devices.

  This has the following consequences:

	- No 'ep' devices may be hardwired.
	  - All hardwired devices will probably be detected twice.
	    By hardwired I mean:

		device          ep0     at isa? port 0x300 irq 10

	- 'ep' devices are ordered by bus, slot, and then MAC address.

- Make 3c509B cards work in PnP mode.  Yes, they really work.
- Convert over to using ifmedia for media selection.  No more of this
  lame 'linkX' stuff.
- Consolidate a lot of duplicated code.
- Make a stab at not breaking MII based PCCARD devices.
  I doubt that the PCCARD stuff works any more than it did before my
  changes but theres hope.  My PCCARD hardware should arrive in a
  week or so.
- Retreive the media settings from the card EEPROM rather than guessing.
  I've got a 3c509-TPO that thinks its got an AUI port and if others
  can report similar problems I'll write a bit of clever code that will
  fix this but right now it works correctly on all but 1 card.
- Clean up a few things and make some cosmetic changes.
- Add myself as the MAINTAINER since nobody else wants to.  I'm
  in the best position to do this as I've got an example of most
  of the cards:

	EISA	3c579	bnc/aui
	MCA	3c529	tp/aui
	ISA	3c509	tpo
	ISA-PnP	3c509B	combo

   If someone wants to send me a any cards I don't have I'd appriciate
   it.  Also welcome are 3c59x boards since I'll be folding if_vx and
   if_ep at some point.
1999-10-27 06:25:16 +00:00
Warner Losh
758b76dc94 Add newbus attachment for pccard driver. Heavily tested by me, and
I'm committing this from a laptop running this driver.  Have only one
devclass for all ep devices (at least for pccard and eisa) so unit
numbering is sane.  Might not work with both isa and non-isa devices
on the same system until ep is updated (Matt has some patches in the
pipeline which should resolve this, he wanted me to commit this so he
can resolve any conflicts against cvs rather than my patches).

Reviewed by: Matt Dodd <mdodd@freebsd.org>
1999-10-25 02:52:16 +00:00
Matthew N. Dodd
7366fe57d4 Fix includes. I missed this the first time around. 1999-10-02 20:22:26 +00:00
Matthew N. Dodd
58e4bcc53a Duplicated '(' removed.
Noticed by: Mark Murray <mark@grondar.za>
1999-09-26 18:04:26 +00:00
Matthew N. Dodd
39b547ce4d - Split out the ISA and PCCARD specific code.
- Split out the prototypes, externs and struct decls from if_epreg.h into
  if_epvar.h.

- Add support for MCA based Etherlink III (3c529) devices.

None of this code is used right now; the old if_ep driver is still
in place and used.

I will eventually get around to converting if_ep_isa.c to newbus once I've
had a talk with Peter and DFR about the DEVICE_IDENTIFY() method.

I have tested this code on my PS/2.  It works.  I would like EISA and ISA
testers since my example hardware hasn't arrived yet.

Add:

dev/ep/if_ep.c          optional ep
dev/ep/if_ep_isa.c      optional ep isa
dev/ep/if_ep_eisa.c     optional ep eisa
dev/ep/if_ep_mca.c      optional ep mca
dev/ep/if_ep_pccard.c   optional ep card

to sys/conf/files

Remove:

i386/eisa/3c5x9.c             optional        ep
i386/isa/if_ep.c              optional        ep

from sys/i386/conf/files.i386

PCCARD testers wanted!

I will switch off and cvs rm the old driver in favor of this copy once
I've had positive feedback or have the hardware to verify that it works.
1999-09-26 06:42:36 +00:00
Poul-Henning Kamp
46783fb897 Remove NBPF conditionality of bpf calls in most of our network drivers.
This means that we will not have to have a bpf and a non-bpf version
of our driver modules.

This does not open any security hole, because the bpf core isn't loadable

The drivers left unchanged are the "cross platform" drivers where the respective
maintainers are urged to DTRT, whatever that may be.

Add a couple of missing FreeBSD tags.
1999-09-25 12:06:01 +00:00
David E. O'Brien
2b832347ec Switch the order of a two tests so that the error actually has to occur
for you to be told there was an error [during verbose boot].

I poked him for the fix, he poked me to get it committed.

Submitted by:	Jason Young <doogie@anet-stl.com>
1999-09-24 16:27:32 +00:00
David E. O'Brien
424baf384e This adds support for the 3Com Megahertz 574B ethernet 16-bit PC-Card.
1) Reworked the probe routine
   2) Addition of the 574B's product ID.
   3) Added useful info when booting verbosely.

Submitted by:	Jason Young <doogie@anet-stl.com>
1999-09-19 06:20:23 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Matthew N. Dodd
e4fd6edfd8 Set ifp->if_init to the right function.
if_init_f_t is passed void * containing the address of ifp->if_softc
not the unit number.

Someone tell me if these things don't work as I don't have the hardware
needed to test them. (thats a first.)

I'll get if_ze and if_zp later.

Pointed out by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1999-08-20 14:12:14 +00:00
Matthew N. Dodd
4b31e9d6a7 Make these actually compile. I got a little delete happy pruning includes
and used 'command' instead of 'cmd' in a few cases.  Also clear up some
unused variables.

Pointed out by: phk
1999-08-18 22:14:24 +00:00
Matthew N. Dodd
b2864868b3 SIOCSIFADDR, SIOCGIFADDR, and SIOCSIFMTU are implemented in
sys/net/if_ethersubr.c:ether_ioctl().  Drivers need not implement generic
behavior.

PR: kern/12126
Submitted by: in part by Boris Popov <bp@butya.kz>
1999-08-18 06:12:00 +00:00
Matthew N. Dodd
0d6ab4a16a Move the specification of EDGE/LEVEL triggered interrupts to
eisa_add_intr() which now takes an additional arguement (one of
EISA_TRIGGER_LEVEL or EISA_TRIGGER_EDGE).

The flag RR_SHAREABLE has no effect when passed to
bus_alloc_resource(dev, SYS_RES_IRQ, ...) in an EISA device context as
the eisa_alloc_resource() call (bus_alloc_resource method) now deals
with this flag directly, depending on the device ivars.

This change does nothing more than move all the 'shared = inb(foo + iobsse)'
nonesense to the device probe methods rather than the device attach.

Also, print out 'edge' or 'level' in the IRQ announcement message.

Reviewed by: dfr
1999-08-01 22:57:09 +00:00
Tatsumi Hosokawa
6afaf5d480 3C574TX 16bit FastEtherlink PC-card support.
Reviewed by:	HAMADA Naoki <nao@tom-yam.or.jp>
Submitted by:	Osamu MIHARA <mihara@prd.fc.nec.co.jp>
1999-07-25 01:20:37 +00:00
Dag-Erling Smørgrav
6b5ca0d83e Rename bpfilter to bpf. 1999-07-06 19:23:32 +00:00
Doug Rabson
566643e39e Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Peter Wemm
a49a3d4433 Implement an EISA new-bus framework. The old driver probe mechanism
had a quirk that made a shim rather hard to implement properly and it was
just easier to convert the drivers in one go.  The changes to the
buslogic driver go beyond just this - the whole driver was new-bus'ed
including pci and isa.  I have only tested the EISA part of this so far.

Submitted by:	 Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
Peter Dufault
e419eecba9 Move the "fetch serial data" delay so that it is an inter-bit delay.
Increase the overall length of the delay by 10.

Without this a 3C509 card on my MediaGX crash box can't be reliably
read.  With this it is solid.

I've left a delay multiplier in instead of just changing the base
delay because I'm surprised I had to increase it so much and expect
there may be another problem.
1999-01-31 22:41:51 +00:00
Peter Wemm
d17e4ee67d Update the pccard hooks to use a module style declaration instead. 1999-01-19 00:21:53 +00:00
Bruce Evans
fe310de802 Initialize isa_devtab entries for interrupt handlers in individual
device drivers, not in ioconf.c.  Use a different hack in isa_device.h
so that a new config(8) is not required yet.

pc98 parts approved by: kato
1998-10-22 05:58:45 +00:00
Bruce Evans
be160d60ab Removed unused includes. 1998-06-21 18:02:50 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
Dag-Erling Smørgrav
dc73342347 Seventy-odd "its" / "it's" typos in comments fixed as per kern/6108. 1998-04-17 22:37:19 +00:00
Bruce Evans
3c1300a6b3 Removed unused #includes. 1998-03-28 13:25:01 +00:00
Mike Smith
9a70f9f75f Fix some style nits and remove an unused header.
Submitted by:	bde
1998-02-27 05:38:32 +00:00
Eivind Eklund
0b08f5f737 Back out DIAGNOSTIC changes. 1998-02-06 12:14:30 +00:00
Eivind Eklund
47cfdb166d Turn DIAGNOSTIC into a new-style option. 1998-02-04 22:34:03 +00:00
Eivind Eklund
1d5e9e2255 Make INET a proper option.
This will not make any of object files that LINT create change; there
might be differences with INET disabled, but hardly anything compiled
before without INET anyway.  Now the 'obvious' things will give a
proper error if compiled without inet - ipx_ip, ipfw, tcp_debug.  The
only thing that _should_ work (but can't be made to compile reasonably
easily) is sppp :-(

This commit move struct arpcom from <netinet/if_ether.h> to
<net/if_arp.h>.
1998-01-08 23:42:31 +00:00
Eivind Eklund
430df5f4b7 Throw options IPX, IPXIP and IPTUNNEL into opt_ipx.h.
The #ifdef IPXIP in netipx/ipx_if.h is OK (used from ipx_usrreq.c and
ifconfig.c only).

I also fixed a typo IPXTUNNEL -> IPTUNNEL (and #ifdef'ed out the code
inside, as it never could have compiled - doh.)
1997-12-15 20:31:25 +00:00
KATO Takenori
ead6305baa Recognize 3C569 network interface when `PC98' is defined.
Submitted by:	HAMADA Naoki <hamada@astec.co.jp>
1997-11-27 12:59:46 +00:00
Nate Williams
133c8c2f49 - Renamed <pccard/card.h> -> <pccard/cardinfo.h>.
Forgotten by:		me
Reminded by:		Bruce
1997-11-20 15:48:41 +00:00
Poul-Henning Kamp
4a11ca4e29 Remove a bunch of variables which were unused both in GENERIC and LINT.
Found by:	-Wunused
1997-11-07 08:53:44 +00:00
Joerg Wunsch
03940bd636 Move the EP_ID_PORT out to 0x110, so it doesn't conflict with other port
usage at 0x100.  Quoted Justin's quotation from the manual as well, to
explain the technical background.

PR:		kern/4559
Submitted by:	Stephen J. Roznowski <sjr@home.net>
1997-10-27 06:15:10 +00:00
Bill Fenner
cca13d34b9 Fix a comment about multicast; since the Etherlink III has no
multicast filter the driver will never learn how to program it.
1997-10-27 00:02:33 +00:00
Nate Williams
075a76a29e - Instead of relying on a functional call to register PCARD-capable drivers,
use a Linker Set.  Note, if a driver is loaded as an LKM  if will have
  to use the function call, but since none of the existing drivers
  are loadable, this made things cleaner and boot messages nicer.

Obtained from:	PAO-970616
1997-10-26 21:08:42 +00:00
Nate Williams
8bb7a8fc95 - Functional changes to PCCARD support.
* Kill individual drivers 'suspend' routines, since there's no simple/safe
   way to suspend/resume a card w/out going through the complete probe
   at initialization time.
 * Default to using the apm_pccard_resume sysctl code, which basically
   pretends the card was removed, and then re-inserted.  Suspend/resume
   is now 'emulated' with a fake insert/removal.  (Hence we no longer
   need the driver-specific suspend routines.)
1997-10-26 04:54:16 +00:00
Nate Williams
e7e437dbfa - Do a bunch of gratuitous changes intended to make the code easier to
follow.
 * Rename/reorder all of the pccard structures, change many of the member
   names to be descriptive, and follow more closely other 'bus' drivers
   naming schemes.
 * Rename a bunch of parameter and local variable names to be more
   consistant in the code.
 * Renamed the PCCARD 'crd' device to be the 'card' device
 * KNF and make the code consistant where it was obvious.
 * ifdef'd out some unused code
1997-10-26 04:36:24 +00:00
Jun-ichiro itojun Hagino
7c66fb14b3 if_ep.c clarification/simplification.
- irq = 9 problem (PR 4693)
- mbuf chaining oddity fixed. (PR 4693)
- trailer protocol has gone. (PR 4693)
- removed mbuf kludge, we got higher performance. (PR 4693)
- some indentation fixes

I'm sorry that I couldn't make a 2.2.5-RELEASE deadline.

PR:		4693
Reviewed by:	babkin@hq.icb.chel.su
Submitted by:	hamada@tom-yam.or.jp
1997-10-14 06:56:09 +00:00
Justin T. Gibbs
953ba64df7 Add shared EISA interrupt support.
Clean up the match routines so that they return const char *
1997-09-21 21:35:24 +00:00
Bruce Evans
4d1d4912ae Added used #include - don't depend on <sys/mbuf.h> including
<sys/malloc.h> (unless we only use the bogusly shared M*WAIT flags).
1997-09-02 01:19:47 +00:00
Bruce Evans
f71d35e402 Removed unused #includes. 1997-07-20 14:10:18 +00:00
Bruce Evans
51a534883a Don't include <sys/ioctl.h> in the kernel. Stage 2: include
<sys/sockio.h> instead of <sys/ioctl.h> in network files.
1997-03-24 11:33:46 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
KATO Takenori
95d98df162 Submitted by: Naoki Hamada <nao@sbl.cl.nec.co.jp>
Support 3COM 3C569 network card on PC98.
1996-12-19 10:31:10 +00:00
Garrett Wollman
59562606b9 Convert the interface address and IP interface address structures
to TAILQs.  Fix places which referenced these for no good reason
that I can see (the references remain, but were fixed to compile
again; they are still questionable).
1996-12-13 21:29:07 +00:00
Bruce Evans
f806e8f0f1 Fixed pessimized (short) i/o port type.
The change in if_epreg.h affects if_epreg.o and 3c5x9.o.

These changes are probably harmless, but I can't test them.
1996-11-11 17:11:08 +00:00
Bruce Evans
4458ac71b1 Removed nested include if <sys/socket.h> from <net/if.h> and
<net/if_arp.h> and fixed the things that depended on it.  The nested
include just allowed unportable programs to compile and made my
simple #include checking program report that networking code doesn't
need to include <sys/socket.h>.
1996-10-12 19:49:43 +00:00
Bruce Evans
71f4712b50 Staticized. Things exported by linker sets should always be static. 1996-10-12 17:34:25 +00:00
Poul-Henning Kamp
40f3771f7f Various cleanups for remanents of devconf. 1996-09-08 10:44:18 +00:00
Poul-Henning Kamp
bfbb029d87 Remove devconf, it never grew up to be of any use. 1996-09-06 23:09:20 +00:00
Poul-Henning Kamp
26a8b0bf7e Megacommit to straigthen out ETHER_ mess.
I'm pretty convinced after looking at this that the majority of our
drivers are confused about the in/exclusion of ETHER_CRC_LEN :-(
1996-08-06 21:14:36 +00:00
Atsushi Murai
826702b23d Under the heavy load for transmiting condition, it will be write error
and then never accept for sending packet from upper layer anymore
(i.e. ping -f )
Reviewed by:	David Greenman <dg@root.com>
Submitted by:	amurai@spec.co.jp
1996-07-27 12:40:31 +00:00
Atsushi Murai
0ed091876d Add interrupt register set up with original register value
before attaching. Without this fix, 3c579(EISA) never make
any H/W inturrupt.
Reviewed by:	"Justin T. Gibbs" <gibbs@freefall.freebsd.org>, nao@sbl.cl.nec.co.jp and owner-current on mailing list ;-)
Submitted by:	amurai@spec.co.jp, nao@sbl.cl.nec.co.jp
1996-07-19 13:20:05 +00:00
David Greenman
4611b39710 Enable transmit complete interrupt...
(author's explaination):

 Bit 15 is the flag to request a transmit complete interrupt.  The
driver was apparently written to minimize interrupts, and if not for a
3-COM design quirk, everything would be just ducky.
 Prior to loading the outbound packet into the FIFO, the driver checks
to see if there's enough space to contain the packet.  If not, the
driver requests a transmit-available interrupt when there is
sufficient room.  Unfortunately, the card is continuing to process the
prior FIFO, and by the time the driver sets the threshold for a
transmit available interrupt, the space is already available.  When
this occurs, the 3COM card ignores the interrupt request, and the
driver is hung waiting for an interrupt that will never occur.
There's probably a more elegant solution, but requesting the transmit
complete interrupt was the easiest to implement.  An alternative fix
might be to check free FIFO space again, after requesting the transmit
available interrupt, but I haven't bothered pursuing this.  Since the
patch, my 3C590 (PCI, same FIFO interface as 3C509) has been rock
solid.

Submitted by:	mevans@candle.com (Mike Evans)
1996-07-13 10:49:53 +00:00
Bruce Evans
9b2b0822b7 Removed unused #includes of <i386/isa/icu.h> and <i386/isa/icu.h>. icu.h
is only used by the icu support modules and by a few drivers that know
too much about the icu (most only use it to convert `n' to `IRQn').  isa.h
is only used by ioconf.c and by a few drivers that know too much about
isa addresses (a few have to, because config is deficient).
1996-06-18 01:22:40 +00:00
Nate Williams
771acaaa0a Whoops, I accidentally deleted a necessary ":" which is part of the
parameters to printf() using the "D" format.  (Why this even worked on
my box during testing I don't know, but as soon as I powered it on/off
it quite working.)
1996-06-15 00:43:03 +00:00
Nate Williams
333f7d7bb6 At long last, we know have support for the 3C589 in a FreeBSD release
using the existing files using the existing PCCARD support.  Now that
this is in place I would like to fixup the PCCARD hooks and remove the
if_zp driver.  At this point, we support everything we used to support
*AND MORE* with the PCCARD code.

Submitted by:	Naoki Hamada <nao@sbl.cl.nec.co.jp> (via the Nomad release)

[ This works on both my 3C589B and 3C589C ]
1996-06-14 22:11:38 +00:00
Nate Williams
8ca7c1c4a0 Better code for switching the ethernet transceiver.
My 3C509B-COMBO works fine with the following patch. Switching between
UTP and BNC is quite easy. (Just type 'ifconfig ep0 link1 -link2' or 'ifconifg
ep0 link2 -link1'.)

[ I tested this with the additional PC-CARD patches and it works on both
connectors on my 3C589B and 3C589C ]

Reviewed by:	nate
Submitted by:	Naoki Hamada <nao@sbl.cl.nec.co.jp>
1996-06-14 21:28:35 +00:00
Gary Palmer
c23670e294 Clean up -Wunused warnings.
Reviewed by:		bde
1996-06-12 05:11:41 +00:00
Justin T. Gibbs
c6841cd18f Properly determine the offset of the remaining bytes we need to transfer
after outsl'ing all the long words we can during transmission in 32bit mode.

Closes PR:i386/1243
Submitted by:	flash@eru.tubank.msk.su
1996-05-24 15:22:36 +00:00
Justin T. Gibbs
6398c75dc7 Fix media type determination. 1996-02-28 17:19:04 +00:00
Justin T. Gibbs
eea817fc73 Clean up the 3c5x9 driver and add an eisaconf probe to it. This should
prevent it from conflicting with other drivers (like the aic7xxx driver).
Most of the work was in spliting out common portions of the driver and
making them generic enough to be called from the eisaconf probe.
1996-02-26 01:05:36 +00:00
Justin T. Gibbs
76e002c102 3c5x9.c:
The eisaconf probe for the 3Com 3c579 and the 3c509 when in eisa
configuration mode.

aha1742.c aic7770.c bt74x.c:
Only call eisa_registerdev after the probe is successfully.

eisaconf.c:
Increase kdc->kdc_datalen during the eisa_reg* functions instead of
in the eisa_add* functions since eisa_registerdev has already been
called and we have a kdc to manipulate.
1996-02-26 01:01:41 +00:00
Justin T. Gibbs
162b7f0ac2 - Properly set the watchdog timer only during transmits.
- Clean up the access to our ifnet structure by caching a pointer
  to it instead of always digging through our softc structure.

Submitted by: Watchdog fixes by Serge A. Babkin <babkin@hq.icb.chel.su>
1996-02-13 15:55:33 +00:00
Garrett Wollman
9b44ff2214 Clean up Ethernet drivers:
- fill in and use ifp->if_softc
	- use if_bpf rather than private cookie variables
	- change bpf interface to take advantage of this
	- call ether_ifattach() directly from Ethernet drivers
	- delete kludge in if_attach() that did this indirectly
1996-02-06 18:51:28 +00:00
Mike Pritchard
6c5e9bbdf5 Fix a bunch of spelling errors in the comment fields of
a bunch of system include files.
1996-01-30 23:02:38 +00:00
Justin T. Gibbs
4a1e5d799a Finally commit Serge's multicast and "misc other changes" patch. I
don't have a network to test it on here, but it does probe my card okay.

Submitted by: "Serge A. Babkin" <babkin@hq.icb.chel.su>
1996-01-29 03:16:14 +00:00
Poul-Henning Kamp
18b7be4064 The last part of the ether_sprint -> %6D change.
Sorry for the delay.
(%D is for hexdumping.)
1996-01-26 09:29:29 +00:00
Bruce Evans
0dfe10a65c Completed function declarations and/or added prototypes and/or added
#includes to get prototypes.
1995-12-15 00:54:32 +00:00
Poul-Henning Kamp
6f4e0beb7e Staticize and cleanup. 1995-12-10 13:40:44 +00:00
David Greenman
4a5f1499b0 all:
Removed ifnet.if_init and ifnet.if_reset as they are generally unused.
Change the parameter passed to if_watchdog to be a ifnet * rather than
a unit number. All of this is an attempt to move toward not needing an
array of softc pointers (which is usually static in size) to point to
the driver softc.

if_ed.c:
Changed some of the argument passing to some functions to make a little
more sense.

if_ep.c, if_vx.c:
Killed completely bogus use of if_timer. It was being set in such a way
that the interface was being reset once per second (blech!).
1995-12-05 02:01:59 +00:00
Bruce Evans
4ff3de8e80 Added `#include "ioconf.h"' to <machine/conf.h> and cleaned up the
misplaced extern declarations (mostly prototypes of interrupt handlers)
that this exposed.  The prototypes should be moved back to the driver
sources when the functions are staticalized.

Added idempotency guards to <machine/conf.h>.  "ioconf.h" can't be
included when building LKMs so define a wart in bsd.kmod.mk to help
guard against including it.
1995-11-04 17:08:13 +00:00
Poul-Henning Kamp
4ccc87c594 Remove unused functions and variables, make things static, and other cleanups. 1995-10-28 15:39:31 +00:00
Julian Elischer
cc6a66f20e Reviewed by: julian and jhay@mikom.csir.co.za
Submitted by:	Mike Mitchell, supervisor@alb.asctmd.com

This is a bulk mport of Mike's IPX/SPX protocol stacks and all the
related gunf that goes with it..
it is not guaranteed to work 100% correctly at this time
but as we had several people trying to work on it
I figured it would be better to get it checked in so
they could all get teh same thing to work on..

Mikes been using it for a year or so
but on 2.0

more changes and stuff will be merged in from other developers now that this is in.

Mike Mitchell, Network Engineer
AMTECH Systems Corporation, Technology and Manufacturing
8600 Jefferson Street, Albuquerque, New Mexico 87113 (505) 856-8000
supervisor@alb.asctmd.com
1995-10-26 20:31:59 +00:00
Garrett Wollman
233b60cec4 Say goodbye to IFF_NOTRAILERS. Support for trailers was officially
dropped for 4.4, but for some reason this flag lived on.  (Until
today, that is.)
1995-10-13 19:48:06 +00:00
Guido van Rooij
de319b9419 Add SIOCGIFADDR ioctl so rarpd actually works with the if_ep interface. 1995-08-28 12:01:17 +00:00
David Greenman
9f77221854 Protected entire epioctl routine with splimp(). In this case, it is better
form to do this than it is relying on individual subroutines (the logic
in epioctl is itself very minimal). Ideally, unnecessary splimp()'s should
now be removed if they exist; I'll leave this for a later date (a complete
code review of the driver needs to be done). Fixes a bug I noticed that
would show up when ifconfig'ing the interface down.
1995-07-05 07:21:34 +00:00
Rodney W. Grimes
9b2e535452 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
David Greenman
dd1da8a5af Increased delay after reset to 10ms. Suggested by several people, the last
of which was Scott Mace. This fixes a bug where the card would be missed
sometimes during the device probe.
1995-05-27 04:40:57 +00:00
Garrett Wollman
6c0081e92b Add a class field to devconf and mst drivers.
For those where it was easy, drivers were also fixed to call
dev_attach() during probe rather than attach (in keeping with the
new design articulated in a mail message five months ago).  For
a few that were really easy, correct state tracking was added as well.
The `fd' driver was fixed to correctly fill in the description.
The CPU identify code was fixed to attach a `cpu' device.  The code
was also massively reordered to fill in cpu_model with somethingremotely
resembling what identifycpu() prints out.  A few bytes saved by using
%b to format the features list rather than lots of ifs.
1995-04-12 20:48:13 +00:00
Jordan K. Hubbard
c8aaabd573 Performance enhancements and a redesign of the transmitter code.
Submitted by:	"Serge A. Babkin" <babkin@hq.icb.chel.su>
1995-04-10 21:25:06 +00:00
Jordan K. Hubbard
cd3a5023d6 Correct the watchdog routine.
Submitted by:	"Serge A. Babkin" <babkin@hq.icb.chel.su>
1995-04-05 13:12:13 +00:00
Jordan K. Hubbard
ec835d2414 * Promiscuous mode added and interrupt logic slightly changed
*  to reduce the number of adapter failures. Transceiver select
 *  logic changed to use value from EEPROM. Autoconfiguration
 *  features added.
Submitted by:	"Serge A. Babkin" <babkin@hq.icb.chel.su>
1995-03-31 06:41:38 +00:00
Bruce Evans
3aa12267a5 Add and move declarations to fix all of the warnings from `gcc -Wimplicit'
(except in netccitt, netiso and netns) that I didn't notice when I fixed
"all" such warnings before.
1995-03-28 07:58:53 +00:00
Justin T. Gibbs
70b211b3a0 aha1742.c:
#include <i386/isa/isa.h>
	return IO_EISASIZE instead of hard coded 0x1000.

if_ep.c:
	Remove commented out disabling of interrupts that gave a
	"comment withing a comment" warning.
1995-03-23 07:31:08 +00:00
David Greenman
0602287958 Patches from Serge Babkin to fix interrupt handling bugs.
Submitted by:	Serge Babkin
1995-03-23 06:53:39 +00:00
David Greenman
5d64e24d3e Added Andres Vega Garcia's email address.
Submitted by:	Andres Vega Garcia
1995-01-24 20:53:45 +00:00
David Greenman
f7c9e2441f Restored Herb's current copyright. The one in the file appeared to have
been run through indent and additionally doesn't contain clauses 3 and 4
that were apparantly added sometime after the driver was put into FreeBSD.
1995-01-08 10:47:23 +00:00
Garrett Wollman
dd2e410221 Move ARP interface initialization into if_ether.c:arp_ifinit(). 1994-12-22 21:56:22 +00:00
David Greenman
307d80be7a Moved conversion of ether_type to host byte order out of ethernet drivers
and into ether_input(). It was silly to have bpf want this one way and
ether_input want it another way. Ripped out trailer support from the few
remaining drivers that still had it.
1994-11-24 14:29:38 +00:00
Justin T. Gibbs
72f30c2bd3 Andres Vega Garcia's improvements to the ep driver. This driver is a merging
of the 1.1.5 driver, a recent version of the NetBSD driver, Andres'
transmission start threshold code, and all other relavent changes to the driver
since it was brought into 2.0.  The multicast support from NetBSD has not be
folded in yet.  I've tested it under high loads for two weeks and it is now
robust enough to be included in the GENERIC kernel.
Reviewed by: gibbs
Submitted by:	vega@sophia.inria.fr (Andres Vega Garcia)
1994-11-13 10:12:37 +00:00
Garrett Wollman
2f86936a07 Finished device configuration database work for all ISA devices (except `ze')
and all SCSI devices (except that it's not done quite the way I want).  New
information added includes:

-	A text description of the device
-	A ``state''---unknown, unconfigured, idle, or busy
-	A generic parent device (with support in the m.i. code)
-	An interrupt mask type field (which will hopefully go away) so that
.	  ``doconfig'' can be written

This requires a new version of the `lsdev' program as well (next commit).
1994-10-23 21:28:03 +00:00
David Greenman
df9ab3049d Removed inclusion of pio.h and cpufunc.h (cpufunc.h is included from
systm.h). Merged functionality of pio.h into cpufunc.h. Cleaned up some
related code.
1994-09-16 13:33:56 +00:00
Andreas Schulz
780f8a2611 Reviewed by:
Submitted by:
Update the if_ep driver for the 3C579 and bring over some of the
changes from the netbsd driver.
This is not complete: the detection of the irq in the eisa does not
work and sometimes the reset for the 3C509 in ISA in an EISA bus system
don't work ( Need a hard reset to be found again == reset knob).
1994-09-03 18:10:44 +00:00
David Greenman
8867d2f19c Added support for SIOCSIFMTU. 1994-08-08 13:33:16 +00:00
Rodney W. Grimes
26f9a76710 The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.
Reviewed by:	Rodney W. Grimes
Submitted by:	John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
Andreas Schulz
fa4452258b Added the bugfixes from the current NetBSD driver. Put in some parts of
the 3c579 support, but not the init/probe part.
1994-05-02 22:27:33 +00:00
Garrett Wollman
11e4fa43bc Added David Mills' kernel NTP PLL code. The current version of NTP does
not yet speak to this code.
1994-03-15 01:58:22 +00:00
David Greenman
49255f96cb if_ep.c: removed netisr.h, fixed unconverted ep_ac, changed <> into ""
for include files.
if_ed, if_ie, if_is: don't include netisr.h.
1994-02-03 11:51:12 +00:00
Nate Williams
db5e13d8a0 Whoops, syntax error where I forgot a parenthesis. 1994-01-26 20:18:56 +00:00
Nate Williams
41252572a1 FreeBSD modifications to driver.
0) FreeBSD additional include files additions
1) Rod's arpacom changes
2) Function type and return code cleanup, and all functions have correct
   casting to the correct data types
3) Bugfix where driver would not function due to missing structure not
   given a value.
4) General cleanup.  (Theo did a lot already, I just did some more)
1994-01-26 09:13:56 +00:00
Nate Williams
287e7e4d61 Newer version of Herb Peyerl's 3C509 driver straight from NetBSD-current. 1994-01-26 09:06:29 +00:00
Rodney W. Grimes
39970aa6a4 Do my fix that I have done to all the other ethernet drivers to use
arpcom intead of foo_ac, remove now unneeded defines, fix support for
options NS.

Still one compiler warning to fix :-)
1994-01-25 11:20:06 +00:00
Andreas Schulz
dd66bbf852 First beta version of the 3C509 driver changed for FreeBSD. Known
problems in the moment are stray intr's in the ifconfig up/down.
No way to select all three interfaces on a combo card with
AUI/BNC/UTP interfaces and the performance doesn't look good.
Only tested with a ISA AUI/BNC card yet.
1994-01-10 19:13:50 +00:00
Andreas Schulz
96b4591b68 Committed the original NetBSD version of this driver to get the changes
made for FreeBSD as cvs diffs. This is the 3C509 ethernet driver.
1994-01-10 18:56:26 +00:00