Commit Graph

29 Commits

Author SHA1 Message Date
Peter Wemm
579f45fa60 Simplify the COMPAT_PCI_DRIVER/DATA_SET hack. We can add:
#define COMPAT_PCI_DRIVER(name,data) DATA_SET(pcidevice_set,data)
.. to 2.2.x and 3.x if people think it's worth it.  Driver writers can do
this if it's not defined.  (The reason for this is that I'm trying to
progressively eliminate use of linker_sets where it hurts modularity and
runtime load capability, and these DATA_SET's keep getting in the way.)
1999-05-09 17:07:30 +00:00
Peter Wemm
ea5c2064b4 GC unused variable 1999-05-06 22:14:46 +00:00
Peter Wemm
96b3554e5c Use COMPAT_PCI_DRIVER() for registration if it exists. This shouldn't
hurt the driver portability to 3.x too much for where drivers are shared.
1999-04-24 20:17:05 +00:00
Poul-Henning Kamp
4738ca443e Organize the various modes (CISCO/AUTO/DEMAND/LEASED) a little bit better,
centralize the code.

Remember to call TLF/TLS on the hardware in CISCO mode.
1999-03-30 13:28:23 +00:00
Julian Elischer
d800ff4aed Fix typo. Unit is spelled with a 'u'. 'init' just types too easily. 1999-01-18 21:27:03 +00:00
Julian Elischer
b645ff7fc3 Fix screwed up previous commit.
Obviously no-one is using this card on ISA as the interrupts
were NOT being handled.
1999-01-18 21:23:47 +00:00
Julian Elischer
0fe90303e0 From inspection, ISA interrupts were completely broken..
revert some of the old ISA code.
(I can't test this but I'm working on the file.)
1999-01-18 07:55:02 +00:00
Eivind Eklund
b6fb09837c Remove/comment out unused functions. 1999-01-12 01:17:01 +00:00
Poul-Henning Kamp
11749a2453 Straigthen out the use of the tls and tlf callbacks.
Not tested on the if_sr, if_cx and if_ar drivers, but
expected to work just the same as it used to.

Any users of these drivers (or even better: donors
of hardware for them) please contact phk@freebsd.org
so we can test the next batch of changes to if_sppp.
1998-12-16 18:42:38 +00:00
Matthew Dillon
2cbe36f725 probe function changed from returning char * to const char *. 1998-12-14 06:37:37 +00:00
Bruce Evans
fe310de802 Initialize isa_devtab entries for interrupt handlers in individual
device drivers, not in ioconf.c.  Use a different hack in isa_device.h
so that a new config(8) is not required yet.

pc98 parts approved by: kato
1998-10-22 05:58:45 +00:00
Bruce Evans
e5b19842ef Removed unused includes. 1998-06-21 14:53:44 +00:00
Bruce Evans
b6f37c1954 Added used include of <i386/isa/isa_device.h> - don't depend on
pollution in <sys/conf.h>
1998-06-17 13:54:59 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
Dag-Erling Smørgrav
dc73342347 Seventy-odd "its" / "it's" typos in comments fixed as per kern/6108. 1998-04-17 22:37:19 +00:00
Eivind Eklund
303b270b0a Staticize. 1998-02-09 06:11:36 +00:00
John Hay
40f001c97d Don't clobber pp_flags when PP_KEEPALIVE must be set. 1998-01-30 19:49:54 +00:00
Eivind Eklund
1d5e9e2255 Make INET a proper option.
This will not make any of object files that LINT create change; there
might be differences with INET disabled, but hardly anything compiled
before without INET anyway.  Now the 'obvious' things will give a
proper error if compiled without inet - ipx_ip, ipfw, tcp_debug.  The
only thing that _should_ work (but can't be made to compile reasonably
easily) is sppp :-(

This commit move struct arpcom from <netinet/if_ether.h> to
<net/if_arp.h>.
1998-01-08 23:42:31 +00:00
Bruce Evans
e4ba6a82b0 Removed unused #includes. 1997-09-02 20:06:59 +00:00
Bruce Evans
4d1d4912ae Added used #include - don't depend on <sys/mbuf.h> including
<sys/malloc.h> (unless we only use the bogusly shared M*WAIT flags).
1997-09-02 01:19:47 +00:00
Bruce Evans
f71d35e402 Removed unused #includes. 1997-07-20 14:10:18 +00:00
Joerg Wunsch
00081cc989 Major overhaul of the SyncPPP layer. Basically, this comprises now a
full implementation of the sate machine as described in RFC1661, and
provides support for plugging in various control protocols.  I needed
this to provide PPP support for the BISDN project (right now).

Unfortunatley, while the existing API was almost up to the point, i
needed one minor API change in order to decouple the this-layer-
started and this-layer-finished actions from the respective Up and
Down events of the lower layer.  This requires two additional lines in
the attach routines of all existing lower layer interface drivers that
are using syncPPP (shortcutting these actions and events).  Apart from
this, i believe i didn't change the API of all this, so everything
should plug in without too many hassles.  Please report if i broke
something in the existing drivers.

For a list of features (including new ones like dial-on-demand), and
things still to be done, please refer to the man page i'll commit asap.

Encouraged by:	Serge Vakulenko <vak@cronyx.ru>
1997-05-19 22:03:09 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
John Hay
0c064d6185 Oops I forgot to add the official id for this card. 1996-11-13 18:06:52 +00:00
John Hay
75c66a120a if_sr.c corrupted the global variable `ticks'.
Cosmetic changes:
if_sr_.c won't compile with a K&R compiler, so there is no need to cast
the timeout arg to the (wrong) type.
Submitted by:	bde
1996-10-31 20:22:40 +00:00
John Hay
ebcdcb982a Add support for the SDL RISCom N2pci cards. Bring in the enhancements
made to the Arnet driver.
1996-10-29 03:53:21 +00:00
Poul-Henning Kamp
bfbb029d87 Remove devconf, it never grew up to be of any use. 1996-09-06 23:09:20 +00:00
John Hay
d805b866fa This driver supports the SDL Communications RISCom/N2 ISA cards that is
based on the HD64570 chip. Both the 1 and 2 port cards is supported.

Line speeds of up to 2Mbps is possible. At this speed about 95% of the
bandwidth is usable with 486DX processors.

The standard FreeBSD sppp code is used for the link level layer. The
default protocol used is PPP. The Cisco HDLC protocol can be used by
adding "link2" to the ifconfig line in /etc/sysconfig or where ever
ifconfig is run.

At the moment only the X.21 interface is tested. The others may need
tweaks to the clock selection code.
1996-07-05 18:51:59 +00:00