The mirrors list is in sync with the Handbook / Mirrors section [1],
which was refreshed a few months ago. Mirrors removed were not
responding or had duplicated addresses (aliases) with another mirror.
1 - https://docs.freebsd.org/en/books/handbook/mirrors/
Reviewed by: philip (clusteradm)
Approved by: philip
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D38014
The variable used for the checklist's default value needs to correspond
to the rc.conf variable as that's what's being parsed to determine them.
In the case of local_unbound it's missing the _enable suffix and thus
always defaults to off on revisit.
Fixes: 58eb9abb31 ("Add a line to the post-installation configuration dialog to enable the local_unbound service.")
There are a few issues here, some of which are hiding others. The first
is that we don't use double quotes around the command substitution so
every word in the conf file is treated as a separate argument to eval,
resulting in spaces being used in place of newlines and thus comments in
the file commenting out the rest of the file, not just to the end of
their line. In particular, we insert one comment just before the dumpdev
entry (the final one in the file) and so we never see dumpdev as set,
and thus set a default value of on for the menu.
The second issue is that, for dumpdev, it takes a value of AUTO not YES
when set, but we don't replace this with on when eval'ing, so then end
up giving AUTO to bsddialog which is interpreted the same as off (which
seems to match GPL dialog). Thus handle AUTO like YES otherwise it will
always appear as unchecked on revisit.
The final issue is that our case-insensitive YES/NO (and now AUTO)
replacements have no word boundaries around them so match the middle of
words too. As it happens this doesn't matter in practice at the moment,
but it could in future; currently the only effect is that it rewrites
moused_nondefault_enable to moused_offndefault_enable, but since this
variable is never read, only written based on moused(_enable) this is
harmless, but we should fix it in case a service comes along in future
that does get affected by it.
This installer option is currently totally useless, as it ends up
creating an ntpd_sync_on_start_enable="YES" entry in rc.conf, not an
ntpd_sync_on_start="YES" entry, as is the correct name. This can also be
noticed by revisiting the services menu, which parses the previously
written rc.conf.services file to set variables governing the default
menu entry values so that selecting OK regenerates the same file, as the
menu entry will use the correct variable name and thus think the entry
was not selected last time, defaulting back to off and losing the
setting.
Thus, add a special case in the loop for this option. The only other
entry that doesn't follow the *_enable pattern is dumpdev (even moused
does, it just also sets a second variable), but that also deviates in
terms of being explicitly set either way and using AUTO rather than YES,
hence why ntpd_sync_on_start follows a different pattern here and is
special-cased rather than introducing a whole new variable that governs
behaviour outside the loop.
Fixes: c153a35bfd ("bsdinstall: replace ntpdate by ntpd_sync_on_start")
fetchmissingdists naturally sets BSDINSTALL_DISTDIR to a directory in
the new filesystem that it can write fetched distfiles to. As a result,
BSDINSTALL_DISTSITE was incorrectly set to the scratch space on /mnt for
the call to distfetch when grabbing local distfiles, and it would
subsequently fail.
Switch to using the copy of BSDINSTALL_DISTDIR that we stashed off
coming into fetchmissingdists; this one is in-fact set to the path where
the local distfiles are stored.
Patch suggested by jrtc27.
Reported and tested by: Daniel O'Connor <darius dons net au>
MFC after: 1 week
* change current NTP services offered by the FreeBSD Installer;
* no longer offer ntpdate to be enabled and started on boot;
* start offering the option to make ntpd set the date and time on boot itself.
The motivation for this change comes from the ntpdate(8) manpage:
Note: The functionality of this program is now available in the ntpd(8)
program. See the -q command line option in the ntpd(8) page. After a
suitable period of mourning, the ntpdate utility is to be retired from
this distribution.
Approved by: cy (src), dteske (src)
Differential Revision: https://reviews.freebsd.org/D36206
Currently we only set canmount=noauto on the root of the BE, this
change makes it so we set it on all datasets under the BE as well.
Reviewed by: allanjude
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D35422
If installing from the DVD, mount its packages in the chroot at
/dist/packages. That way they'll be accessible to an install script.
MFC after: 2 weeks
Sponsored by: Axcient
Reviewed by: gjb
Differential Revision: https://reviews.freebsd.org/D35330
Don't shadow an already-local variable with another local declaration.
Reported by: dteske
MFC after: 13 days
MFC with: caf73e5857
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D35331
If the ZFSBOOT_DISKS variable is set to one or more disk names, then
those disks should be preselected in the disk menu. However, the code
wasn't correctly setting the variable, leaving all disks unselected.
MFC after: 2 weeks
Sponsored by: Axcient
Reviewed by: dteske
Differential Revision: https://reviews.freebsd.org/D35331
Otherwise, boot will hang if the numbering of disks has changed since
initial install.
MFC after: 2 weeks
Sponsored by: Axcient
Reviewed by: brd
Differential Revision: https://reviews.freebsd.org/D35309
Replace (LGPL) dialog utility with (BSD-2-Clause) bsddialog utility.
Add --hline info because bsddialog requires TAB to switch the focus on
buttons for an inputbox, dialog differs.
Delete f_dialog_inputbox_size() using libbsddialog autosizing.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D35285
bsdinstall(8) has an option to enable moused support.
However, if it is not selected, moused is still started
through the configuration of nondefault devices.
So, automatically add the moused_nondefault_enable="NO"
setting to rc.conf unless moused support is selected.
PR: 227999
Reported by: bcran
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D35193
When running zpool export first, boot/efi and dev is still mounted so
zpool export fails. By running bsdinstall umount first the pool can be
cleanly exported.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D35114
Sponsored by: Beckhoff Automation GmbH & Co. KG
MFC After: 3 days
Throughout the bsdinstall script fd 3 is used by f_dprintf (set through
$TERMINAL_STDOUT_PASSTHRU). By closing file descriptor 3 here, the
final f_dprintf "Installation Completed ... does not work anymore.
By putting the code into a subshell, file descriptors can be edited
without interference with the calling script.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D35113
Sponsored by: Beckhoff Automation GmbH & Co. KG
MFC after: 3 days
After an installation restart (for error or choice) dhclient does not
rebuild resolv.conf so `dialog --mixedform' of "Resolver Configuration"
in bsdinstall/scripts/netconfig draws empty forms. It causes a bad UX,
to see PR262262. Fixed resetting the interface before to run dhclient.
PR: 262262
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D35094
Replace (LGPL) dialog utility with (BSD-2-Clause) bsddialog utility,
'dialog --calendar' is replaced by 'bsddialog --datebox' with same
features but different User Interface.
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D34583
Improve the installer: wlanconfig allows user to enter WiFi details
if no networks found, useful to connect to a hidden SSID.
PR: 246192
Reported by: emaste
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D34149
When error is called with a message with spaces (and probably multiple
lines) these are passed into dialog unquoted and an error message was
presented, wrap with quotes.
Reviewed by: bapt, allanjude
Sponsored by: Ampere Computing LLC
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D33918
If one install FreeBSD on multiple disks (say 13 and CURRENT) the first created
pool will always be used.
Prompt the user for a new pool name if we detect that the default or supplied one
already exists.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33331
If one install FreeBSD on the same machine multiple times in a row or
on different harddrive they have a lot of 'FreeBSD' efi boot entries added.
With this patch we now do :
- If there is no 'FreeBSD' entry we add one like before
- If there is one or more entries we ask the user if they want to delete
them all and add a new one
- If they say yes we do that
- If they say no we prompt them an inputbox so they can enter a different
entry name if they want, it defaults to 'FreeBSD'
Reviewed by: bapt, imp
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33330
It's required to specify a default boot option in order to make
petitboot's autoboot feature work.
Tested on Raptor Blackbird
Reviewed by: imp, luporl
MFC after: 2 days
Sponsored by: Instituto de Pesquisas Eldorado (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D32838
This reverts commit 020f411255.
Because now ASLR is enabled by default for 64-bit architectures
and the purpose of the installation menu is to allow choosing
additional 'mitigation'/'hardening' options that are originally
disabled, remove the ASLR knob from bsdinstall.
Discussed with: emaste
Obtained from: Semihalf
Sponsored by: Stormshield
This is a follow-up to 2697622687,
which fixed 2 out of 3 broken uses of the mirrorselect script.
Reviewed by: emaste
Approved by: emaste (src)
MFC after: 7 days
Differential Revision: https://reviews.freebsd.org/D32927