The vnode pager does not want the object lock held. Moving this out allows
further object lock scope reduction in callers. While here add some missing
paging in progress calls and an assert. The object handle is now protected
explicitly with pip.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D23033
Filesystems which want to use it in limited capacity can employ the
VOP_UNLOCK_FLAGS macro.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D21427
Record as much bits from curthread into busy_lock as fits. Low bits
for struct thread * representation are zero due to struct and zone
alignment, and they leave space for busy flags (perhaps except
statically allocated thread0). Upper bits are not very interesting
for assert, and in most practical situations recorded value should
allow to manually identify the owner with certainity.
Assert that unbusy is performed by the owner, except few places where
unbusy is done in io completion handler. For this case, add
_unchecked variants of asserts and unbusy primitives.
Reviewed by: markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D22298
and busy pages. Add code that would carefully cleanups the state in case
of synchronous error return. Cover a case when a first I/O went on
asynchronously, but second or N-th returned error synchronously.
In collaboration with: chs
Reviewed by: jtl, kib
This adds the glue to allocate TLS sessions and invokes it from
the TLS enable socket option handler. This also adds some counters
for active TOE sessions.
The TOE KTLS mode is returned by getsockopt(TLSTX_TLS_MODE) when
TOE KTLS is in use on a socket, but cannot be set via setsockopt().
To simplify various checks, a TLS session now includes an explicit
'mode' member set to the value returned by TLSTX_TLS_MODE. Various
places that used to check 'sw_encrypt' against NULL to determine
software vs ifnet (NIC) TLS now check 'mode' instead.
Reviewed by: np, gallatin
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21891
There are several mechanisms by which a vm_page reference is held,
preventing the page from being freed back to the page allocator. In
particular, holding the page's object lock is sufficient to prevent the
page from being freed; holding the busy lock or a wiring is sufficent as
well. These references are protected by the page lock, which must
therefore be acquired for many per-page operations. This results in
false sharing since the page locks are external to the vm_page
structures themselves and each lock protects multiple structures.
Transition to using an atomically updated per-page reference counter.
The object's reference is counted using a flag bit in the counter. A
second flag bit is used to atomically block new references via
pmap_extract_and_hold() while removing managed mappings of a page.
Thus, the reference count of a page is guaranteed not to increase if the
page is unbusied, unmapped, and the object's write lock is held. As
a consequence of this, the page lock no longer protects a page's
identity; operations which move pages between objects are now
synchronized solely by the objects' locks.
The vm_page_wire() and vm_page_unwire() KPIs are changed. The former
requires that either the object lock or the busy lock is held. The
latter no longer has a return value and may free the page if it releases
the last reference to that page. vm_page_unwire_noq() behaves the same
as before; the caller is responsible for checking its return value and
freeing or enqueuing the page as appropriate. vm_page_wire_mapped() is
introduced for use in pmap_extract_and_hold(). It fails if the page is
concurrently being unmapped, typically triggering a fallback to the
fault handler. vm_page_wire() no longer requires the page lock and
vm_page_unwire() now internally acquires the page lock when releasing
the last wiring of a page (since the page lock still protects a page's
queue state). In particular, synchronization details are no longer
leaked into the caller.
The change excises the page lock from several frequently executed code
paths. In particular, vm_object_terminate() no longer bounces between
page locks as it releases an object's pages, and direct I/O and
sendfile(SF_NOCACHE) completions no longer require the page lock. In
these latter cases we now get linear scalability in the common scenario
where different threads are operating on different files.
__FreeBSD_version is bumped. The DRM ports have been updated to
accomodate the KPI changes.
Reviewed by: jeff (earlier version)
Tested by: gallatin (earlier version), pho
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20486
This field was not initialized in the !KERN_TLS case triggering an
assertion failure when using sendfile(2).
Reported by: pho, asomers
Sponsored by: Netflix
KTLS adds support for in-kernel framing and encryption of Transport
Layer Security (1.0-1.2) data on TCP sockets. KTLS only supports
offload of TLS for transmitted data. Key negotation must still be
performed in userland. Once completed, transmit session keys for a
connection are provided to the kernel via a new TCP_TXTLS_ENABLE
socket option. All subsequent data transmitted on the socket is
placed into TLS frames and encrypted using the supplied keys.
Any data written to a KTLS-enabled socket via write(2), aio_write(2),
or sendfile(2) is assumed to be application data and is encoded in TLS
frames with an application data type. Individual records can be sent
with a custom type (e.g. handshake messages) via sendmsg(2) with a new
control message (TLS_SET_RECORD_TYPE) specifying the record type.
At present, rekeying is not supported though the in-kernel framework
should support rekeying.
KTLS makes use of the recently added unmapped mbufs to store TLS
frames in the socket buffer. Each TLS frame is described by a single
ext_pgs mbuf. The ext_pgs structure contains the header of the TLS
record (and trailer for encrypted records) as well as references to
the associated TLS session.
KTLS supports two primary methods of encrypting TLS frames: software
TLS and ifnet TLS.
Software TLS marks mbufs holding socket data as not ready via
M_NOTREADY similar to sendfile(2) when TLS framing information is
added to an unmapped mbuf in ktls_frame(). ktls_enqueue() is then
called to schedule TLS frames for encryption. In the case of
sendfile_iodone() calls ktls_enqueue() instead of pru_ready() leaving
the mbufs marked M_NOTREADY until encryption is completed. For other
writes (vn_sendfile when pages are available, write(2), etc.), the
PRUS_NOTREADY is set when invoking pru_send() along with invoking
ktls_enqueue().
A pool of worker threads (the "KTLS" kernel process) encrypts TLS
frames queued via ktls_enqueue(). Each TLS frame is temporarily
mapped using the direct map and passed to a software encryption
backend to perform the actual encryption.
(Note: The use of PHYS_TO_DMAP could be replaced with sf_bufs if
someone wished to make this work on architectures without a direct
map.)
KTLS supports pluggable software encryption backends. Internally,
Netflix uses proprietary pure-software backends. This commit includes
a simple backend in a new ktls_ocf.ko module that uses the kernel's
OpenCrypto framework to provide AES-GCM encryption of TLS frames. As
a result, software TLS is now a bit of a misnomer as it can make use
of hardware crypto accelerators.
Once software encryption has finished, the TLS frame mbufs are marked
ready via pru_ready(). At this point, the encrypted data appears as
regular payload to the TCP stack stored in unmapped mbufs.
ifnet TLS permits a NIC to offload the TLS encryption and TCP
segmentation. In this mode, a new send tag type (IF_SND_TAG_TYPE_TLS)
is allocated on the interface a socket is routed over and associated
with a TLS session. TLS records for a TLS session using ifnet TLS are
not marked M_NOTREADY but are passed down the stack unencrypted. The
ip_output_send() and ip6_output_send() helper functions that apply
send tags to outbound IP packets verify that the send tag of the TLS
record matches the outbound interface. If so, the packet is tagged
with the TLS send tag and sent to the interface. The NIC device
driver must recognize packets with the TLS send tag and schedule them
for TLS encryption and TCP segmentation. If the the outbound
interface does not match the interface in the TLS send tag, the packet
is dropped. In addition, a task is scheduled to refresh the TLS send
tag for the TLS session. If a new TLS send tag cannot be allocated,
the connection is dropped. If a new TLS send tag is allocated,
however, subsequent packets will be tagged with the correct TLS send
tag. (This latter case has been tested by configuring both ports of a
Chelsio T6 in a lagg and failing over from one port to another. As
the connections migrated to the new port, new TLS send tags were
allocated for the new port and connections resumed without being
dropped.)
ifnet TLS can be enabled and disabled on supported network interfaces
via new '[-]txtls[46]' options to ifconfig(8). ifnet TLS is supported
across both vlan devices and lagg interfaces using failover, lacp with
flowid enabled, or lacp with flowid enabled.
Applications may request the current KTLS mode of a connection via a
new TCP_TXTLS_MODE socket option. They can also use this socket
option to toggle between software and ifnet TLS modes.
In addition, a testing tool is available in tools/tools/switch_tls.
This is modeled on tcpdrop and uses similar syntax. However, instead
of dropping connections, -s is used to force KTLS connections to
switch to software TLS and -i is used to switch to ifnet TLS.
Various sysctls and counters are available under the kern.ipc.tls
sysctl node. The kern.ipc.tls.enable node must be set to true to
enable KTLS (it is off by default). The use of unmapped mbufs must
also be enabled via kern.ipc.mb_use_ext_pgs to enable KTLS.
KTLS is enabled via the KERN_TLS kernel option.
This patch is the culmination of years of work by several folks
including Scott Long and Randall Stewart for the original design and
implementation; Drew Gallatin for several optimizations including the
use of ext_pgs mbufs, the M_NOTREADY mechanism for TLS records
awaiting software encryption, and pluggable software crypto backends;
and John Baldwin for modifications to support hardware TLS offload.
Reviewed by: gallatin, hselasky, rrs
Obtained from: Netflix
Sponsored by: Netflix, Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21277
Both of these functions atomically unwire a page, optionally attempt
to free the page, and enqueue or requeue the page. Add functions
vm_page_release() and vm_page_release_locked() to perform the same task.
The latter must be called with the page's object lock held.
As a side effect of this refactoring, the buffer cache will no longer
attempt to free mapped pages when completing direct I/O. This is
consistent with the handling of pages by sendfile(SF_NOCACHE).
Reviewed by: alc, kib
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20986
This is a partial merge of 350144 from projects/fuse2
PR: 236466
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21095
This can be enabled at runtime via the kern.ipc.mb_use_ext_pgs sysctl.
It is disabled by default.
Submitted by: gallatin (earlier version)
Reviewed by: gallatin, hselasky, rrs
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20616
- Add macros to allow preinitialization of cap_rights_t.
- Convert most commonly used code paths to use preinitialized cap_rights_t.
A 3.6% speedup in fstat was measured with this change.
Reported by: mjg
Reviewed by: oshogbo
Approved by: sbruno
MFC after: 1 month
With r332974, when performing a synchronized access of a page's "queue"
field, one must first check whether the page is logically dequeued. If
so, then the page lock does not prevent the page from being removed
from its page queue. Intoduce vm_page_queue(), which returns the page's
logical queue index. In some cases, direct access to the "queue" field
is still required, but such accesses should be confined to sys/vm.
Reported and tested by: pho
Reviewed by: kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D15280
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
In many cases the page is not enqueued so the change will have no
effect. However, the change is needed to support an optimization in
the fault handler and in some cases (sendfile, the buffer cache) it
was being emulated by the caller anyway.
Reviewed by: alc
Tested by: pho
MFC after: 2 weeks
X-Differential Revision: https://reviews.freebsd.org/D14625
Previously, wiring a page would cause it to be removed from its page
queue. In the common case, unwiring causes it to be enqueued at the tail
of that page queue. This change modifies vm_page_wire() to not dequeue
the page, thus avoiding the highly contended page queue locks. Instead,
vm_page_unwire() takes care of requeuing the page as a single operation,
and the page daemon dequeues wired pages as they are encountered during
a queue scan to avoid needlessly revisiting them later. For pages in
PQ_ACTIVE we do even better, since a requeue is unnecessary.
The change improves scalability for some common workloads. For instance,
threads wiring pages into the buffer cache no longer need to modify
global page queues, and unwiring is usually done by the bufspace thread,
so concurrency is not as much of an issue. As another example, many
sysctl handlers wire the output buffer to avoid faults on copyout, and
since the buffer is likely to be in PQ_ACTIVE, we now entirely avoid
modifying the page queue in this case.
The change also adds a block comment describing some properties of
struct vm_page's reference counters, and the busy lock.
Reviewed by: jeff
Discussed with: alc, kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D11943
"optimization". First, sendfile(..., SF_NOCACHE) frees pages without
checking whether those pages are mapped. This can leave the system
with mappings to free or repurposed pages. Second, a page can be
busied between the time of the current busy test and acquiring the
object lock. Essentially, the test performed before the object lock
is acquired can only be regarded as an optimization to short-circuit
further work on the page. It cannot, however, be relied upon to prove
that it is safe to free the page. Third, when sendfile(..., SF_NOCACHE)
was originally implemented, vm_page_deactivate_noreuse() did not yet
exist. Use vm_page_deactivate_noreuse() instead of vm_page_deactivate(),
because it comes closer to freeing the page.
In collaboration with: glebius
Discussed with: gallatin, kib, markj
X-MFC after: r324448
Sendfile() should match the error checking order of send() which
is currently:
SBS_CANTSENDMORE
so_error
SS_ISCONNECTED
Submitted by: Jason Eggleston <jason@eggnet.com>
Reviewed by: glebius
MFC after: 2 weeks
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12633
o Fall back to default m_ext free mech, using function pointer in
m_ext_free, and remove sf_ext_free() called directly from mbuf code.
Testing on modern CPUs showed no regression.
o Provide internally used flag EXT_FLAG_SYNC, to mark that I/O uses
SF_SYNC flag. Lack of the flag allows us not to dereference
ext_arg2, saving from a cache line miss.
o Create function sendfile_free_page() that later will be used, for
multi-page mbufs. For now compiler will inline it into
sendfile_free_mext().
In collaboration with: gallatin
Differential Revision: https://reviews.freebsd.org/D12615
connection was reset by the remote end, sendfile() would just report
ENOTCONN instead of ECONNRESET.
Submitted by: Jason Eggleston <jason@eggnet.com>
Reviewed by: glebius
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12575
The problem is that fdrop() requires syscall context, as it may
enter sleep in some cases. The reason to use it in the original
non-blocking sendfile implementation, was to avoid use of global
ACCEPT_LOCK() on every I/O completion. Now in head sorele() no
longer requires this lock.
crash when the file shrinks. This also fixes sendfile(2) not sending more
data in a case when the file grows, and the request is open-ended or
specifies a size that is greater than old file size.
PR: 217789
Reviewed by: gallatin
MFC after: 10 days
do any speculations about readahead, and use exactly the amount of readahead
specified by user. E.g. setting SF_FLAGS(0, SF_USER_READAHEAD) will guarantee
that no readahead at all will be performed.
sendfile_swapin() loop works this way:
- Find first invalid page in the request.
- Do vm_pager_has_page() and get count of pages, that can be taken in
single I/O.
- Trim valid pages from the end of the request.
- Cycle through the request and substitute to bogus_page all valid
pages that are in the middle of the request.
- After I/O launched (pager copies array of pages into buf(9), it
is important to restore proper page pointers with help vm_page_lookup().
Count bogus pages used and report them in sendfile stats.
buffer and put a small optimization for low socket buffer case:
- Do not hack uio_resid, and let m_uiotombuf() properly take care of it. This
fixes truncation of headers at low buffer.
- If headers ate all the space, jump right to the end of the cycle, to
avoid doing single page I/O and allocating zero length mbuf.
- Clear hdr_uio only if space is positive, which indicates that all uio
was copied in.
Reviewed by: pluknet, jtl, emax, rrs, lstewart, emax, gallatin, scottl
Descriptor returned by accept(2) should inherits capabilities rights from
the listening socket.
PR: 201052
Reviewed by: emaste, jonathan
Discussed with: many
Differential Revision: https://reviews.freebsd.org/D7724
data (headers). Historically the size of the headers was not checked
against the socket buffer space. Application could easily overcommit the
socket buffer space.
With the new sendfile (r293439) the problem remained, but a KASSERT was
inserted that checked that amount of data written to the socket matches
its space. In case when size of headers is bigger that socket space,
KASSERT fires. Without INVARIANTS the new sendfile won't panic, but
would report incorrect amount of bytes sent.
o With this change, the headers copyin is moved down into the cycle, after
the sbspace() check. The uio size is trimmed by socket space there,
which fixes the overcommit problem and its consequences.
o The compatibility handling for FreeBSD 4 sendfile headers API is pushed
up the stack to syscall wrappers. This required a copy and paste of the
code, but in turn this allowed to remove extra stack carried parameter
from fo_sendfile_t, and embrace entire compat code into #ifdef. If in
future we got more fo_sendfile_t function, the copy and paste level would
even reduce.
Reviewed by: emax, gallatin, Maxim Dounin <mdounin mdounin.ru>
Tested by: Vitalij Satanivskij <satan ukr.net>
Sponsored by: Netflix
The m_ext.ext_cnt pointer becomes a union. It can now hold the refcount
value itself. To tell that m_ext.ext_flags flag EXT_FLAG_EMBREF is used.
The first mbuf to attach a cluster stores the refcount. The further mbufs
to reference the cluster point at refcount in the first mbuf. The first
mbuf is freed only when the last reference is freed.
The benefit over refcounts stored in separate slabs is that now refcounts
of different, unrelated mbufs do not share a cache line.
For EXT_EXTREF mbufs the zone_ext_refcnt is no longer needed, and m_extadd()
becomes void, making widely used M_EXTADD macro safe.
For EXT_SFBUF mbufs the sf_ext_ref() is removed, which was an optimization
exactly against the cache aliasing problem with regular refcounting.
Discussed with: rrs, rwatson, gnn, hiren, sbruno, np
Reviewed by: rrs
Differential Revision: https://reviews.freebsd.org/D5396
Sponsored by: Netflix
separate file. Claim my copyright.
- Provide more comments, better function and structure names.
- Sort out unneeded includes from resulting two files.
No functional changes.
