This is part of a project for adding the ability to create hybrid CD/USB boot
images. In the BIOS case when booting from something that isn't a CD we need
some extra boot code to actually find our next stage (loader) within an
ISO9660 filesystem. This code will reside in a GPT partition (similar to
gptboot(8) from which it is derived) and looks for /boot/loader in an
ISO9660 filesystem on the image.
Reviewed by: imp
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14914
Followup to r313780. Also prefix ext2's and nandfs's versions with
EXT2_ and NANDFS_.
Reported by: kib
Reviewed by: kib, mckusick
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D9623
A foolish consistency is the hobgoblin of little minds, adored by
little statesmen and philosophers and divines. With consistency a
great soul has simply nothing to do. -- Ralph Waldo Emerson
Make sure { on the same line as struct for all struct *devdesc. Move
some type definitions to next to the dv_type define, since that's what
sets the d_type.
to fix the memory leak that I introduced in r328426. Instead of
trying to clear up the possible memory leak in all the clients, I
ensure that it gets cleaned up in the source (e.g., ffs_sbget ensures
that memory is always freed if it returns an error).
The original change in r328426 was a bit sparse in its description.
So I am expanding on its description here (thanks cem@ and rgrimes@
for your encouragement for my longer commit messages).
In preparation for adding check hashing to superblocks, r328426 is
a refactoring of the code to get the reading/writing of the superblock
into one place. Unlike the cylinder group reading/writing which
ends up in two places (ffs_getcg/ffs_geom_strategy in the kernel
and cgget/cgput in libufs), I have the core superblock functions
just in the kernel (ffs_sbfetch/ffs_sbput in ffs_subr.c which is
already imported into utilities like fsck_ffs as well as libufs to
implement sbget/sbput). The ffs_sbfetch and ffs_sbput functions
take a function pointer to do the actual I/O for which there are
four variants:
ffs_use_bread / ffs_use_bwrite for the in-kernel filesystem
g_use_g_read_data / g_use_g_write_data for kernel geom clients
ufs_use_sa_read for the standalone code (stand/libsa/ufs.c
but not stand/libsa/ufsread.c which is size constrained)
use_pread / use_pwrite for libufs
Uses of these interfaces are in the UFS filesystem, geoms journal &
label, libsa changes, and libufs. They also permeate out into the
filesystem utilities fsck_ffs, newfs, growfs, clri, dump, quotacheck,
fsirand, fstyp, and quot. Some of these utilities should probably be
converted to directly use libufs (like dumpfs was for example), but
there does not seem to be much win in doing so.
Tested by: Peter Holm (pho@)
There are some _write callbacks left only returning EROFS, replace them
by null_write. return EROFS from null_write().
Reviewed by: cem, imp, kan
Differential Revision: https://reviews.freebsd.org/D14523
Current timeout behavior is to progress in timeout values from MINTMO to
MAXTMO in MINTMO steps before finally timing out. This results in a fairly
long time before operations finally timeout, which may not be ideal for some
use-cases.
Add MAXWAIT that may be configured along with MINTMO/MAXTMO. If we attempt
to start our send/recv cycle over again but MAXWAIT > 0 and MAXWAIT seconds
have already passed, then go ahead and timeout.
This is intended for those that just want to say "timeout after 180 seconds"
rather than calculate and tweak MINTMO/MAXTMO to get their desired timeout.
The default is 0, or "progress from MINTMO to MAXTMO with no exception."
This has been modified since review to allow for it to be defined via CFLAGS
and doing appropriate error checking. Future work may add some Makefile foo
to respect LOADER_NET_MAXWAIT if it's specified in the environment and pass
it in as MAXWAIT accordingly.
Reviewed by: imp, sbruno, tsoome (all previous version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14389
Write support (even if it only works on UFS) will be needed for nextboot
functionality.
Reviewed by: cem, imp
Differential Revision: https://reviews.freebsd.org/D14478
ffs_sbget() may return a superblock buffer even if it fails, so the
caller must be prepared to free it in this case. Moreover, when tasting
alternate superblock locations in a loop, ffs_sbget()'s readfunc
callback must free the previously allocated buffer.
Reported and tested by: pho
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D14390
OK. We don't really need a bsd.stand.mk, and it was causing a -fPIC
for the toolchain to be added (bogusly) when building on amd64. Pull
all relevant defs back into defs.mk and delete bsd.stand.mk.
This saves about 15-20k on i386 loader and zfsloader which when
combined with Lua give us a lot more stack space in those constrained
environments.
bootp/arp/rarp/rpc all use the sendrecv implementation in net.c. tftp has
its own implementation because it passes an extra parameter into the recv
callback for the received payload type to be held.
These sendrecv implementations are otherwise equivalent, so consolidate
them. The other users of sendrecv won't be using the extra argument to recv,
but this gives us only one place to worry about respecting timeouts and one
consistent timeout behavior.
Tested by: sbruno
Reviewed by: sbruno, tsoome
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14373
readip() doesn't, at the moment, properly indicate to callers that it has
timed out. One can tell that it's timed out if errno == EAGAIN when it
returns, but this is not ideal. Restructure it a little bit to explicitly
set errno to ETIMEDOUT if we've exhausted tleft.
I found two places that care about where it timed out or not: sendrecv in
net.c and sendrecv_tftp. Both are structured to pass smaller timeout values
to readip while tracking a larger timeout. Neither of them were able to do
this properly with readip not indicating ETIMEDOUT, so fix it.
While here, straighten out the time (t/t1) usage in sendrecv_tftp.
This would have manifested itself in periodic failures to NFS/TFTP boot for
no apparent reason because MINTMO/MAXTMO were not actually being respected
properly. Problems were not reported with NFS, only TFTP.
Reported by: sbruno
Reviewed by: sbruno, tsoome
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D14350
MK_CTF, MK_SSP, MK_PROFILE, NO_PIC, and INTERNALLIB are always the
same, so set them in defs.mk. MAN= is common, so set it here too.
This removes a lot of boring repetition from the Makefiles that added
almost no value.
Move prototypes to proper section now that we don't have modified
versions of strtol and strtoul in libsa. Add prototypes for new
strtoll and strtoull. Use prototypes copied from stdlib.h instead of
the old hand-rolled ones.
(I forgot to move this file form my lua branch in r328613)
since they suffice. Create xlocale_private.h which provides the most
minimal locale implementation we can get away with. Add strtoll and
strtoull from libc.
Specifically reading is done if ffs_sbget() and writing is done
in ffs_sbput(). These functions are exported to libufs via the
sbget() and sbput() functions which then used in the various
filesystem utilities. This work is in preparation for adding
subperblock check hashes.
No functional change intended.
Reviewed by: kib
bool indicating whether the input value represents a valid BCD byte.
The existing bcd2bin() routine will KASSERT if asked to convert a bad value,
but sometimes the kernel has to handle BCD data from untrusted sources, so
this will provide a mechanism to validate data before attempting conversion.
This would be have easier/cleaner if the bcd2bin_data[] array contained an
out-of-range value (such as 0xff) in the infill locations that aren't valid,
but it's a global symbol that might be referenced by out-of-tree code
relying on the current scheme, so I'm leaving that alone.
strnlen is not used at the moment, but it will be when libfdt gets updated.
Prepare for the not-so-distant future by pulling in strnlen.
Noticed because: segfault in ld.bfd due to strnlen missing
weren't needed, and their existance interfered with things in subtle
ways. One of these subtle ways was that malloc could be different
based on what files were included when (even within the same .c file,
it turns out). Move to a single malloc implementation as well by
adding the calls to setheap() to gptboot.c and zfsboot.c. Once upon a
time, these boot loaders strove to not use libstand. However, with the
proliferation of features, that striving is too hard for too little
gain and lead to stupid mistakes.
This fixes the GELI-enabled (but not even using) boot environment. The
geli routines were calling libstand malloc but zfsboot.c and gptboot.c
were using the mini libstand malloc, so this failed when we tried to
probe for GELI partitions. Subtle changes in build order when moving
to self-contained stand build in r326593 toggled what it used from one
type to another due to odd nesting of the zfs implementation code that
differed subtly between zfsloader and zfsboot.
Sponsored by: Netflix
the stand environment that's safe to use (and insulated from whatever
build env you might normally have), stop hacking the bzlib and zlib
sources with sed. There's no longer any need.
Sponsored by: Netflix
Building with the standard system headers isn't a perfect match to the
stand environment. Instead, copy over the files we know are safe to
use and constrain what else is used. We use -nostdinc to achieve this.
This also fixes issues with building 32-bit libraries on amd64
sometimes pulling in the wrong cpufunc.h giving an error now that we
stop on errors. It will also enable an easier transition to lua boot.
Sponsored by: Netflix
Default WARNS to 0 still, since there's still some warnings on other
architectures.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13301
These prototypes were needlessly different from the standard. Fix them
to be the same, and fix the surrounding code after the changes.
Sponsored by: Netflix
Move kernel includes and libsa includes together at the top of defs.mk
Move all machine specific defines from Makefile.inc to their friends
in defs.mk.
Add comments and remove now useless junk after the move.
Sponsored by: Netflix
