Commit Graph

202 Commits

Author SHA1 Message Date
Jayachandran C.
07042bef45 Fix OF_finddevice error return value in case of FDT.
According to the open firmware standard, finddevice call has to return
a phandle with value of -1 in case of error.

This commit is to:
- Fix the FDT implementation of this interface (ofw_fdt_finddevice) to
  return (phandle_t)-1 in case of error, instead of 0 as it does now.
- Fix up the callers of OF_finddevice() to compare the return value with
  -1 instead of 0 to check for errors.
- Since phandle_t is unsigned, the return value of OF_finddevice should
  be checked with '== -1' rather than '<= 0' or '> 0', fix up these cases
  as well.

Reported by:	nwhitehorn

Reviewed by:	raj
Approved by:	raj, nwhitehorn
2011-12-02 15:24:39 +00:00
Ed Schouten
d745c852be Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
Olivier Houchard
11e55f9108 Disable the TX ready interrupts once we received one, some UART won't clear
the IIR_TXRDY bit upon reading.

Reviewed by:	marcel
2011-11-02 20:45:44 +00:00
Robert Watson
e5a0927394 Follow up to r225203 refining break-to-debugger run-time configuration
improvements:

(1) Implement new model in previously missed at91 UART driver
(2) Move BREAK_TO_DEBUGGER and ALT_BREAK_TO_DEBUGGER from opt_comconsole.h
    to opt_kdb.h (spotted by np)
(3) Garbage collect now-unused opt_comconsole.h

MFC after:	3 weeks
Approved by:	re (bz)
2011-08-27 14:24:27 +00:00
Robert Watson
4cf7545589 Attempt to make break-to-debugger and alternative break-to-debugger more
accessible:

(1) Always compile in support for breaking into the debugger if options
    KDB is present in the kernel.

(2) Disable both by default, but allow them to be enabled via tunables
    and sysctls debug.kdb.break_to_debugger and
    debug.kdb.alt_break_to_debugger.

(3) options BREAK_TO_DEBUGGER and options ALT_BREAK_TO_DEBUGGER continue
    to behave as before -- only now instead of compiling in
    break-to-debugger support, they change the default values of the
    above sysctls to enable those features by default.  Current kernel
    configurations should, therefore, continue to behave as expected.

(4) Migrate alternative break-to-debugger state machine logic out of
    individual device drivers into centralised KDB code.  This has a
    number of upsides, but also one downside: it's now tricky to release
    sio spin locks when entering the debugger, so we don't.  However,
    similar logic does not exist in other device drivers, including uart.

(5) dcons requires some special handling; unlike other console types, it
    allows overriding KDB's own debugger selection, so we need a new
    interface to KDB to allow that to work.

GENERIC kernels in -CURRENT will now support break-to-debugger as long as
appropriate boot/run-time options are set, which should improve the
debuggability of BETA kernels significantly.

MFC after:	3 weeks
Reviewed by:	kib, nwhitehorn
Approved by:	re (bz)
2011-08-26 21:46:36 +00:00
Ed Schouten
78d4d8eeb2 Restore binary compatibility for GIO_KEYMAP and PIO_KEYMAP.
Back in 2009 I changed the ABI of the GIO_KEYMAP and PIO_KEYMAP ioctls
to support wide characters. I created a patch to add ABI compatibility
for the old calls, but I didn't get any feedback to that.

It seems now people are upgrading from 8 to 9 they experience this
issue, so add it anyway.
2011-07-17 08:19:19 +00:00
John Baldwin
2f8c04ad8f Add device ID for the Davicom 56PDV PCI Modem.
PR:		kern/75132
Submitted by:	Mike Tancsa @ Sentex (older patch against puc(4))
MFC after:	1 week
2011-07-08 17:45:38 +00:00
Hans Petter Selasky
24f4fe9a01 Add support for a MosChip PCI express serial port adapter.
MFC after:	1 week
2011-06-29 14:47:20 +00:00
Marcel Moolenaar
5bdddc29c2 Ignore MCR[6] during the probe to fix a false negative. Bit 6 of the
MCR register on the Sunix Sun1699 chip tends to be set but doesn't
seem to have a function. That is, FreeBSD just works (provided the
correct RCLK is used) regardless.

PR:		kern/129663
Diagnostics:	Eygene Ryabinkin <rea-fbsd at codelabs.ru>
MFC after:	3 days
2011-05-26 17:02:56 +00:00
Marius Strobl
c71dacd168 Recognize the SAB 82532 found in Fujitsu PRIMEPOWER650 and 900. 2011-05-15 13:27:38 +00:00
Rebecca Cran
6bccea7c2b Fix typos - remove duplicate "the".
PR:	bin/154928
Submitted by:	Eitan Adler <lists at eitanadler.com>
MFC after: 	3 days
2011-02-21 09:01:34 +00:00
Marcel Moolenaar
f1fb96475a In uart_tty_outwakeup(), check CTS/RTS flow control settings and
prevent sending data when CTS is de-asserted.
In uart_tty_intr(), call uart_tty_outwakeup() when the CTS signal
changed, knowing that uart_tty_outwakeup() will do the right
thing for flow control. This avoids redundant conditionals.

PR:		kern/148644
Submitted by:	John Wehle <john@feith.com>
MFC after:	3 days
2011-01-24 18:34:16 +00:00
Marcel Moolenaar
3470949a74 Check the environment for system devices before using the FDT.
This allows overriding the FDT, and allows specifying a debug
port.
2011-01-17 23:34:36 +00:00
Tijl Coosemans
81bd5041a2 Merge amd64 and i386 bus.h and move the resulting header to x86. Replace
the original amd64 and i386 headers with stubs.

Rename (AMD64|I386)_BUS_SPACE_* to X86_BUS_SPACE_* everywhere.

Reviewed by:	imp (previous version), jhb
Approved by:	kib (mentor)
2010-12-20 16:39:43 +00:00
Rebecca Cran
b1ce21c6ef Fix typos.
PR:	bin/148894
Submitted by:	olgeni
2010-11-09 10:59:09 +00:00
Rafal Jaworowski
4f124b977c Eliminate FDT_IMMR_VA define.
This removes platform dependencies from <machine>/fdt.h for the benfit of
portability.
2010-07-19 18:47:18 +00:00
Rafal Jaworowski
d1d3233ebd Convert Freescale PowerPC platforms to FDT convention.
The following systems are affected:

  - MPC8555CDS
  - MPC8572DS

This overhaul covers the following major changes:

  - All integrated peripherals drivers for Freescale MPC85XX SoC, which are
    currently in the FreeBSD source tree are reworked and adjusted so they
    derive config data out of the device tree blob (instead of hard coded /
    tabelarized values).

  - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC,
    QUICC, UART, CFI.

  - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire
    ocpbus(4) driver, which was based on hard-coded config data.

Note that world for these platforms has to be built WITH_FDT.

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
Rafal Jaworowski
db5ef4fc77 Convert Marvell ARM platforms to FDT convention.
The following systems are involved:

  - DB-88F5182
  - DB-88F5281
  - DB-88F6281
  - DB-78100
  - SheevaPlug

This overhaul covers the following major changes:

  - All integrated peripherals drivers for Marvell ARM SoC, which are
    currently in the FreeBSD source tree are reworked and adjusted so they
    derive config data out of the device tree blob (instead of hard coded /
    tabelarized values).

  - Since the common FDT infrastrucutre (fdtbus, simplebus) is used we say
    good by to obio / mbus drivers and numerous hard-coded config data.

Note that world needs to be built WITH_FDT for the affected platforms.

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation.
2010-06-13 13:28:53 +00:00
Rafal Jaworowski
b618dad3c2 FDT (simplebus) compatible attachment for uart(4).
This will be a single uart(4) attachment code shared by all FDT-enabled
platforms.

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation
2010-06-02 17:20:00 +00:00
Marius Strobl
f6ffc3c26b Remove redundant checking of sc_leaving (uart_intr() already handles this).
Approved by:	marcel
2010-05-02 19:07:19 +00:00
Marius Strobl
d5dba21cf6 Add sbbc(4), a driver for the BootBus controller found in Serengeti and
StarCat systems which provides time-of-day services for both as well as
console service for Serengeti, i.e. Sun Fire V1280. While the latter is
described with a device type of serial in the OFW device tree, it isn't
actually an UART. Nevertheless the console service is handled by uart(4)
as this allowed to re-use quite a bit of MD and MI code. Actually, this
idea is stolen from Linux which interfaces the sun4v hypervisor console
with the Linux counterpart of uart(4).
2010-04-10 11:52:12 +00:00
Xin LI
506b3c39b8 Add PCI ID for MCS9901.
Submitted by:	gcooper
PR:		kern/144397
MFC after:	1 month
2010-03-01 20:41:27 +00:00
Marius Strobl
48533564ca Recognize the NS16552 found in PCIe-based sun4u machines. 2009-12-23 22:31:43 +00:00
Gavin Atkinson
eb8e36c9f6 Support the tablet in (at least) the Toshiba Portege M200 Tablet PC.
This device only appears on the ACPI bus, so isn't caught by the current
entry for it in the uart(4) ISA attachment.

PR:		kern/140172
Reviewed by:	jhb, marcel
Approved by:	ed (mentor)
MFC after:	2 weeks
2009-12-21 22:57:40 +00:00
Alexander Motin
7b4386c655 Add ID for NetMos NM9820 Serial Port chip, found on CardBus serial adapter. 2009-12-08 14:55:07 +00:00
Marcel Moolenaar
1d864e0d2d Add support for the NetMos NM9865 family of Serial/Parallel ports.
Obtained from:	NetMos MCS9865 v1.0.0.1 driver
MFC after:	3 days
2009-12-07 20:05:02 +00:00
Ed Schouten
f02d50a3c8 Remove unneeded includes of <sys/termios.h>. 2009-11-28 11:13:50 +00:00
Marcel Moolenaar
0acb3c4aac Fix RTS/CTS flow control, broken by the TTY overhaul. The new TTY
interface is fairly simple WRT dealing with flow control, but
needed 2 new RX buffer functions with "get-char-from-buf" separated
from "advance-buf-pointer" so that the pointer could be advanced
only when ttydisc_rint() succeeded.

MFC after:	1 week
2009-10-02 22:30:44 +00:00
Nathan Whitehorn
ccf6415e82 Fix serial console on Apple Xserve G5 by falling back to input-device-1
if input-device is unavailable. The Xserve G5 defaults to using
screen/keyboard for output-device/input-device even if these are not
installed, and then falls back to serial ports at boot time.

Reviewed by:	marcel
Hardware from:	grehan
Approved by:	re (kib)
2009-07-23 12:51:27 +00:00
Marcel Moolenaar
85fc5c3b93 Move the memory layout definitions and logic from mvreg.h to mvwin.h
so that it isn't exposured unless needed. In particular this means
that it's easier to tune the memory layout based on board details.
While here, remove inclusion of <machine/intr.h> from mvreg.h. This
also contains exposure to SoC specifics in MI drivers, because NIRQ
depends on the SoC.
2009-06-12 20:00:38 +00:00
Ed Schouten
c5e30cc02b Last minute TTY API change: remove mutex argument from tty_alloc().
I don't want people to override the mutex when allocating a TTY. It has
to be there, to keep drivers like syscons happy. So I'm creating a
tty_alloc_mutex() which can be used in those cases. tty_alloc_mutex()
should eventually be removed.

The advantage of this approach, is that we can just remove a function,
without breaking the regular API in the future.
2009-05-29 06:41:23 +00:00
Marcel Moolenaar
39bc3bff94 Don't use pmap_kextact() when comparing bus handles for Book-E.
We typically wire translation to devices with TLB1 entries and
pmap_kextract() does not know about those and returns 0.  This
causes false positives (read: all serial ports suddenly become
the console).
2009-04-08 22:19:39 +00:00
Marcel Moolenaar
d7ae5af5c4 Fix hangs caused by hardware that signals receive errors
(framing, parity, etc), but does not indicate characters
being received. Since no chracters have been received,
ignore the line errors.

PR:		131006
MFC after:	3 days
2009-04-08 00:14:06 +00:00
Nathan Whitehorn
1c96bdd146 Add support for 64-bit PowerPC CPUs operating in the 64-bit bridge mode
provided, for example, on the PowerPC 970 (G5), as well as on related CPUs
like the POWER3 and POWER4.

This also adds support for various built-in hardware found on Apple G5
hardware (e.g. the IBM CPC925 northbridge).

Reviewed by:    grehan
2009-04-04 00:22:44 +00:00
Warner Losh
155a83e87a remove now-redunant cardbus attachment. 2009-03-09 13:23:54 +00:00
John Baldwin
843994aee1 Add support for the single-port NetMos NM9835 serial adapter. The puc(4)
entry is a specific entry to override the generic NetMos entry so that
puc(4) will leave this device alone and let uart(4) claim it.

Submitted by:	Navdeep Parhar  nparhar @ gmail
Reviewed by:	marcel
MFC after:	1 week
2009-03-05 16:43:33 +00:00
Kai Wang
64fc5491db Added entries for Lava SP-PCI (1 serial + 1 parallel) PCI card. The
card is a multifunction PCI and report itself as two logical devices.
2009-02-11 00:08:03 +00:00
Rafal Jaworowski
d0bc717a43 De-hard code UART speed setting for Marvell SOCs when hw.uart.console is not
specified. Instead, let uart(4) fall back to whatever speed firmware has set.
2009-01-08 13:24:25 +00:00
Alexander Kabaev
7d376cbce3 Minor style(9) compliance change. 2008-12-27 16:03:34 +00:00
Marcel Moolenaar
437f63ab5f Cast to uintptr_t before casting to void*. This allows the
QUICC backend to be built on LP64 platforms. This makes it
possible to include the QUICC backend in the kernel module.

PR:		127120
2008-11-22 21:22:53 +00:00
Ed Schouten
9b866e4e8b Fix detaching of uart(4) devices.
With our new TTY layer we use a two step device destruction procedure.
The TTY first gets abandoned by the device driver. When the TTY layer
notices all threads have left the TTY layer, it deallocates the TTY.

This means that the device unit number should not be reused before a
callback from the TTY layer to the device driver has been made. newbus
doesn't seem to support this concept (yet), so right now just add a
destructor with a big comment in it. It's not ideal, but at least it's
better than panicing.

Reported by:	rnoland
2008-10-23 19:11:44 +00:00
Rafal Jaworowski
373bbe25ff Introduce basic support for Marvell families of system-on-chip ARM devices:
*  Orion
     - 88F5181
     - 88F5182
     - 88F5281

  * Kirkwood
     - 88F6281

  * Discovery
     - MV78100

The above families of SOCs are built around CPU cores compliant with ARMv5TE
instruction set architecture definition. They share a number of integrated
peripherals. This commit brings support for the following basic elements:

  * GPIO
  * Interrupt controller
  * L1, L2 cache
  * Timers, watchdog, RTC
  * TWSI (I2C)
  * UART

Other peripherals drivers will be introduced separately.

Reviewed by:	imp, marcel, stass (Thanks guys!)
Obtained from:	Marvell, Semihalf
2008-10-13 20:07:13 +00:00
Yoshihiro Takahashi
3726c6bbc1 Use bus_space_compare() rather than i386_memio_compare() directly. 2008-09-07 04:47:39 +00:00
Yoshihiro Takahashi
81df65c311 Add the 2nd CCU and PnP devices support on pc98.
Reviewed by:	imp
Obtained from:	//depot/projects/uart with some fixes
2008-08-25 14:45:24 +00:00
Ed Schouten
bc093719ca Integrate the new MPSAFE TTY layer to the FreeBSD operating system.
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:

- Improved driver model:

  The old TTY layer has a driver model that is not abstract enough to
  make it friendly to use. A good example is the output path, where the
  device drivers directly access the output buffers. This means that an
  in-kernel PPP implementation must always convert network buffers into
  TTY buffers.

  If a PPP implementation would be built on top of the new TTY layer
  (still needs a hooks layer, though), it would allow the PPP
  implementation to directly hand the data to the TTY driver.

- Improved hotplugging:

  With the old TTY layer, it isn't entirely safe to destroy TTY's from
  the system. This implementation has a two-step destructing design,
  where the driver first abandons the TTY. After all threads have left
  the TTY, the TTY layer calls a routine in the driver, which can be
  used to free resources (unit numbers, etc).

  The pts(4) driver also implements this feature, which means
  posix_openpt() will now return PTY's that are created on the fly.

- Improved performance:

  One of the major improvements is the per-TTY mutex, which is expected
  to improve scalability when compared to the old Giant locking.
  Another change is the unbuffered copying to userspace, which is both
  used on TTY device nodes and PTY masters.

Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.

Obtained from:		//depot/projects/mpsafetty/...
Approved by:		philip (ex-mentor)
Discussed:		on the lists, at BSDCan, at the DevSummit
Sponsored by:		Snow B.V., the Netherlands
dcons(4) fixed by:	kan
2008-08-20 08:31:58 +00:00
Benno Rice
0aefb0a63c The XScale PXA255 has three generally ns16x50 compatible UARTs. One of the
variations from normal 16x50 behaviour however is the the use of a normally
unused bit of IER to control RX timeout interrupts independently of the
generally used RXRDY bit.  If this bit is not enabled, we only ever get
interrupts when the FIFO is full, never before.  This is not very useful when
the UART is being used as a console.

In order to support this without causing potential problems on more "normal"
16x50 variants, this change introduces two hints for the uart device, ier_mask
and ier_rxbits.  These can be used to override which bits get set and cleared
when we're enabling and disabling RX interrupts.

Reviewed by:	marcel
2008-05-30 01:57:13 +00:00
Peter Wemm
43d7128c14 Expand kdb_alt_break a little, most commonly used with the option
ALT_BREAK_TO_DEBUGGER.  In addition to "Enter ~ ctrl-B" (to enter the
debugger), there is now "Enter ~ ctrl-P" (force panic) and
"Enter ~ ctrl-R" (request clean reboot, ala ctrl-alt-del on syscons).

We've used variations of this at work.  The force panic sequence is
best used with KDB_UNATTENDED for when you just want it to dump and
get on with it.

The reboot request is a safer way of getting into single user than
a power cycle.  eg: you've hosed the ability to log in (pam, rtld, etc).
It gives init the reboot signal, which causes an orderly reboot.

I've taken my best guess at what the !x86 and non-sio code changes
should be.

This also makes sio release its spinlock before calling KDB/DDB.
2008-05-04 23:29:38 +00:00
Sam Leffler
823c77d78b add device hints to control the rx FIFO interrupt level on 16550A parts
PR:		kern/121421
Submitted by:	UEMURA Tetsuya
Reviewed by:	marcel
MFC after:	2 weeks
2008-03-12 19:09:20 +00:00
Rafal Jaworowski
e1ef781113 Support for Freescale QUad Integrated Communications Controller.
The QUICC engine is found on various Freescale parts including MPC85xx, and
provides multiple generic time-division serial channel resources, which are in
turn muxed/demuxed by the Serial Communications Controller (SCC).

Along with core QUICC/SCC functionality a uart(4)-compliant device driver is
provided which allows for serial ports over QUICC/SCC.

Approved by:	cognet (mentor)
Obtained from:	Juniper
MFp4:		e500
2008-03-03 18:20:17 +00:00
Rafal Jaworowski
6b7ba54456 Initial support for Freescale PowerQUICC III MPC85xx system-on-chip family.
The PQ3 is a high performance integrated communications processing system
based on the e500 core, which is an embedded RISC processor that implements
the 32-bit Book E definition of the PowerPC architecture. For details refer
to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8555E

This port was tested and successfully run on the following members of the PQ3
family: MPC8533, MPC8541, MPC8548, MPC8555.

The following major integrated peripherals are supported:

  * On-chip peripherals bus
  * OpenPIC interrupt controller
  * UART
  * Ethernet (TSEC)
  * Host/PCI bridge
  * QUICC engine (SCC functionality)

This commit brings the main functionality and will be followed by individual
drivers that are logically separate from this base.

Approved by:	cognet (mentor)
Obtained from:	Juniper, Semihalf
MFp4:		e500
2008-03-03 17:17:00 +00:00