one place where we now need to multiply the size of the struct with the
number of entries. This lead to problems when restarting user space
daemons, as the cleanup was never properly done, resulting in MRT_ADD_VIF
EADDRINUSE.
Properly zero all array elements to avoid this problem.
PR: 246629, 206583
Reported by: (many)
MFC after: 4 days
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
we'll panic on an assertion.
While here, leave a comment that the ifp was never protected and stable
(as glebius pointed out) and this needs to be fixed properly.
Discovered while working on: PR 246629
Reviewed by: glebius
MFC after: 4 days
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
- Support Prefetchable Memory.
- Use the correct rman when allocating memory and ioports.
- Translate PCI addresses in bus_alloc_resource to allow physical
addresses that are different than pci addresses.
Reviewed by: Robert Crowston <crowston_protonmail.com>
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25121
These macro definitions are no longer needed as the NFS OSX port is long
dead. The vfs_statfs macro conflicts with the vfsops field of the same
name.
Submitted by: shivank@
Reviewed by: rmacklem
MFC after: 2 weeks
Sponsored by: Google, Inc. (GSoC 2020)
Differential Revision: https://reviews.freebsd.org/D25263
o Parse the ACPI DSD (Device Specific Data) graph property and record
device connections.
o Split-out FDT support to a separate file.
o Get the corresponding (FDT/ACPI) Coresight platform data in
the device drivers.
Sponsored by: DARPA, AFRL
Add a header definition for DCCP as defined in RFC4340. This header definition
is required to perform validation when receiving and forwarding DCCP packets.
We do not currently support DCCP.
Reviewed by: gallatin, bz
Approved by: bz (co-mentor)
MFC after: 1 week
MFC with: 350749
Differential Revision: https://reviews.freebsd.org/D21179
Changes in the mbuf layout regarding HW TLS, resulted in wrong detection
of starting mbuf. Use a boolean variable to handle this and pass m_adj()
the top mbuf, so that the packet header is adjusted correctly.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Make sure we disable the multicast filter in promiscious mode aswell as when
the all multicast flag is set.
MFC after: 1 week
Found by: Tycho Nightingale <tychon@freebsd.org>
Sponsored by: Mellanox Technologies
There may be some version of mountd out there that does not supply a default
security flavor when none is given for an export.
Set the default security flavor in vfs_export if none is given, and remove the
workaround for oexport compat.
Reported by: npn
Reviewed by: rmacklem
Approved by: mav (mentor)
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25300
packet drill script was failing with a number of unexpected acks. So it turns
out if you have the default recvwin set up to 1Meg (like OCA's do) and you
have no window scaling (like the dupack checking code) then we have another
case where we are always trying to update the rwnd and sending an
ack when we should not.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D25298
When doing secure boot, loader wants to export loader.ve.hashed
the value of which typically exceeds KENV_MVALLEN.
Replace use of KENV_MVALLEN with tunable kenv_mvallen.
Add getenv_string_buffer() for the case where a stack buffer cannot be
created and use uma_zone_t kenv_zone for suitably sized buffers.
Reviewed by: stevek, kevans
Obtained from: Abhishek Kulkarni <abkulkarni@juniper.net>
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D25259
then does not properly respond to them. This is because a few missing bits are not present.
BBR actually does properly respond (though it also sends a TLP which is interesting and
maybe something to fix)..
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D25294
This patch moves the UID_xxx and GID_xxx definitions out of the
#ifdef _KERNEL section, so that userspace programs like mountd
can use them.
There are a couple of userspace programs that do define UID_ROOT,
but they do not include sys/conf.h. Since they are defined as
the same value, maybe they should be changed to include sys/conf.h.
Reviewed by: kib
Differential Revision: https:/reviews.freebsd.org/D25281
U-APSD (unscheduled automatic power save delivery) is a power save method
that's a bit better than legacy PS-POLL - stations can mark frames with
an extra flag that tells the AP to leak out more frames after it sends
its own frames rather than needing to send a PS-POLL to get another frame
from the AP.
Now, this code just handles the negotiation bits; it doesn't actually
implement U-APSD. That's up to drivers, and nothing in the tree yet
implements this. I /may/ implement this for ath(4) if I eventually care
enough but right now I plan on just implementing it for firmware offload
based NICs that handle this in the NIC.
I'll commit the ifconfig bit after this and I may have some follow-up
commits as this gets used more by me in local testing.
This should be a glorious no-op for everyone else. If things change
for anyone that isn't fixed by a complete recompile then please reach out
to me.
PR: kern/240432
Analyzed by by: Alex S <iwtcex@gmail.com>
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25248
Since the two functions are similar, introduce a common function
(vtnet_rx_vq_process()) to share common code.
This also improves locking, by ensuring vrxs_rescheduled is accessed
under the RXQ lock, and taskqueue_enqueue() is not called under the
lock (therefore avoiding a spurious duplicate lock warning).
Reported by: jrtc27
MFC after: 2 weeks
Big endian and armv4 mean that we are now down to only two supported
variants. A future change will use MACHINE_ARCH in assembly which
does not support C-style string concatentation and thus needs
MACHINE_ARCH defined as a single string.
Reviewed by: imp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25211
Remove TSO from the toggle mask when automatically disabled by TXCKSUM* in
various NIC drivers.
Reviewed by: hselasky, np, gallatin, jpaetzel
Approved by: mav (mentor)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25120
For legacy devices that don't support MrgRxBuf (such as bhyve pre-r358180),
r361944 failed to update the receive handler to account for the additional
padding introduced by the unused num_buffers field that is now always present
in struct vtnet_rx_header. Thus, calculate the padding dynamically based on
vtnet_hdr_size.
PR: 247242
Reported by: thj
Tested by: thj
The nm_register callback needs to call nm_set_native_flags()
or nm_clear_native_flags() once the device has been stopped.
However, in the current implementation this is not true,
as the device is stopped by vtnet_init_locked(). This causes
race conditions where the driver crashes as soon as it
dequeues netmap buffers assuming they are mbufs (or the other
way around).
To fix the issue, we extend vtnet_init_locked() with a second
argument that, if not zero, will set/clear the netmap flags.
This results in a huge simplification of the nm_register
callback itself.
Also, use netmap_reset() to check if a ring is going to be
re-initialized in netmap mode.
MFC after: 1 week
Parts of the z8530 driver were still using the SUN channel spacing.
This was invalid on PowerMac and QEMU, where the attachment was to escc,
not escc-legacy. This means the driver has apparently NEVER worked properly
on Macintosh hardware.
Add documentation for the channel spacing details, and change to using
driver-specific initialization instead of hardcoded spacing so either
spacing can be used.
Fixes boot hang in QEMU when using the serial console, and fixes use on
Xserve serial (and presumably PowerMacs that have a Stealth Serial port
or similar)
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D24661
Prepare support to be able to handle font data in loader, consolidate
data structures to sys/font.h and update vtfontcvt.
vtfontcvt update is about to output set of glyphs in form of C source,
the implementation does allow to output compressed or uncompressed font
bitmaps.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D24189
Since mnt_flags was upgraded to 64bits there has been a quirk in
"struct export_args", since it hold a copy of mnt_flags
in ex_flags, which is an "int" (32bits).
This happens to currently work, since all the flag bits used in ex_flags are
defined in the low order 32bits. However, new export flags cannot be defined.
Also, ex_anon is a "struct xucred", which limits it to 16 additional groups.
This patch revises "struct export_args" to make ex_flags 64bits and replaces
ex_anon with ex_uid, ex_ngroups and ex_groups (which points to a
groups list, so it can be malloc'd up to NGROUPS in size.
This requires that the VFS_CHECKEXP() arguments change, so I also modified the
last "secflavors" argument to be an array pointer, so that the
secflavors could be copied in VFS_CHECKEXP() while the export entry is locked.
(Without this patch VFS_CHECKEXP() returns a pointer to the secflavors
array and then it is used after being unlocked, which is potentially
a problem if the exports entry is changed.
In practice this does not occur when mountd is run with "-S",
but I think it is worth fixing.)
This patch also deleted the vfs_oexport_conv() function, since
do_mount_update() does the conversion, as required by the old vfs_cmount()
calls.
Reviewed by: kib, freqlabs
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25088
In the 11n world, most NICs did A-MPDU receive/transmit offloading but
not A-MSDU offloading. So, the net80211 A-MPDU receive path would just
receive MPDUs, do the reordering bit, pass it up to the rest of
net80211 for crypto decap and then do A-MSDU decap before throwing ethernet
frames up to the rest of the system.
However 11ac and 11ax NICs are increasingly doing A-MSDU offload (and
newer 11ax stuff does socket offload, but hey I don't want to scare people
JUST yet) - so although A-MPDU reordering may be done in the OS, A-MSDUs
look like a normal MPDU. This means that all the MSDUs are actually
faked into a set of MPDUs with matching 802.11 header - the sequence number,
QoS header and any encryption verification bits (like IV) are just copied.
This shows up as MASSIVE packet loss in net80211, cause after the first MPDU
we just toss the rest.
(And don't get me started about ethernet decap with A-MPDU host reordering;
we'll have to cross that bridge for later 11ac and 11ax bits too.)
Anyway, this work changes each A-MPDU reorder slot into an mbufq.
The mbufq is treated as a whole set of frames to pass up to the stack
and reordered/de-duped as a group. The last frame in the reorder list
is checked to see if it's an A-MSDU final frame so any duplicates are
correctly tossed rather than double-received. Other than that, the
rest of the logic is unchanged.
The previous commit did a small subset of this - if there wasn't any reordering
going on then it'd accept the A-MSDUs. This is the rest of the needed work.
This is a no-op for 11n NICs doing A-MPDU reordering but needing software
A-MSDU decap - they aren't tagged as A-MSDU and so any subsequent
frames added to the reorder slot are tossed.
Tested:
* QCA9880 (ath10k/athp) - STA/AP mode;
* RT3593 (if_rsu) - 11n STA+DWDS mode (I'm committing through it rn);
* QCA9380 (if_ath) - STA/AP mode.
This is a new, optional (for now!) method that drivers can use to separate
node allocation and node initialisation. Right now they're the same, and
drivers that need to do node allocation via firmware commands need to sleep
and thus they need to defer node allocation into an internal taskqueue.
Right now they're just separate but not deferred. Later on if I get the time
we'll start deferring the node and key related operations but that requires
making a bunch of other stuff (notably things that generate frames!) also
async/deferred.
Tested:
* RT3593, STA/DWDS mode
* AR9380, STA/AP modes
* QCA9880 (athp) - STA/AP modes
It's a useful debug aid for anyone using Ctrl-T today, and doesn't seem to be
widely known. So, enable it out of the box to help people find it.
It's a tunable and sysctl, so if you don't like it, it's easy to disable
locally.
If people really hate it, we can always flip it back.
Reported by: Daniel O'Connor
making them break when the representation changes. Revert changes that
eliminated the color field from rb-trees, leaving everything as it was
before.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D25250
Allow net80211 drivers to register a small vtable of debugnet-related
methods.
This is not a functional change. Driver support is needed, similar to
debugnet(4) for wired NICs.
Reviewed by: adrian, markj (earlier version both)
Differential Revision: https://reviews.freebsd.org/D17308
Hide C-only declarations under #ifndef LOCORE. This will be used by
future changes to define ELF notes in assembly.
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25211