Commit Graph

211 Commits

Author SHA1 Message Date
Alexander Motin
610defb17c Fix AHCI Enclosure Management, broken by r351356.
ivars value of -1 was used to distinguish EM device, and r351356 left some
wrong checks for it.  Give EM device separate flag there instead.
2019-08-28 22:04:04 +00:00
Warner Losh
93289cfcd2 Create a AHCI attachment for nvme.
Intel has created RST and many laptops from vendors like Lenovo and Asus. It's a
mechanism for creating multiple boot devices under windows. It effectively hides
the nvme drive inside of the ahci controller. The details are supposed to be a
trade secret. However, there's a reverse engineered Linux driver, and this
implements similar operations to allow nvme drives to attach. The ahci driver
attaches nvme children that proxy the remapped resources to the child. nvme_ahci
is just like nvme_pci, except it doesn't do the PCI specific things. That's
moved into ahci where appropriate.

When the nvme drive is remapped, MSI-x interrupts aren't forwarded (the linux
driver doesn't know how to use this either). INTx interrupts are used
instead. This is suboptimal, but usually sufficient for the laptops these parts
are in.

This is based loosely on https://www.spinics.net/lists/linux-ide/msg53364.html
submitted, but not accepted by, Linux. It was written by Dan Williams. These
changes were written from scratch by Olivier Houchard.

Submitted by: cognet@ (Olivier Houchard)
2019-08-21 22:18:01 +00:00
Alexander Motin
53f5ac1310 Improve AHCI Enclosure Management and SES interoperation.
Since SES specs do not define mechanism to map enclosure slots to SATA
disks, AHCI EM code I written many years ago appeared quite useless,
that always bugged me.  I was thinking whether it was a good idea, but
if LSI HBAs do that, why I shouldn't?

This change introduces simple non-standard mechanism for the mapping
into both AHCI EM and SES code, that makes AHCI EM on capable controllers
(most of Intel's) a first-class SES citizen, allowing it to report disk
physical path to GEOM, show devices inserted into each enclosure slot in
`sesutil map` and `getencstat`, control locate and fault LEDs for specific
devices with `sesutil locate adaX on` and `sesutil fault adaX on`, etc.

I've successfully tested this on Supermicro X10DRH-i motherboard connected
with sideband cable of its S-SATA Mini-SAS connector to SAS815TQ backplane.
It can indicate with LEDs Locate, Fault and Rebuild/Remap SES statuses for
each disk identical to real SES of Supermicro SAS2 backplanes.

MFC after:	2 weeks
2019-06-23 19:05:01 +00:00
Emmanuel Vadot
73f707e259 ahci: Check if bus is cache-coherent
We do this for FDT systems but not for ACPI ones.
Check the presence of the _CCA attribute.

Sponsored by: Ampere Computing, LLC
Reviewed by:	andrew
Differential Revision:	https://reviews.freebsd.org/D20144
2019-05-10 16:43:53 +00:00
Alexander Motin
abb7ac4d18 Add some Cannon Lake chipset IDs.
Submitted by:	Dmitry Luhtionov <dmitryluhtionov@gmail.com>
MFC after:	2 weeks
2019-03-20 17:27:00 +00:00
Konstantin Belousov
d91cc9dd63 Fix use of busdma(9) KPI in ahci(4).
Use BUS_DMA_NOWAIT for loads at initialization time.
Report actual numeric error code if any problem occurs at the
initialization.

Reported and tested by:	pho
Reviewed by:	mav
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
Differential revision:	https://reviews.freebsd.org/D18741
2019-01-07 02:39:40 +00:00
Xin LI
99f65e3efe Remove questionable initialization for ICH8M, rely on BIOS to properly
initialize the controller.

According to the datasheet, the old code checks if port 2 (P2E, 0x4) was
the only enabled port (except port 0, which was ignored by mask 0xfe),
and issue a write to the PCS register to disable all but port 0, right
before ahci_ctlr_reset.

Some other operating systems would issue a port enable to all ports, but
since the current code only does the special initialization for ICH8M,
it entirely and rely on BIOS to do the right thing (the alternative
would be https://reviews.freebsd.org/D18300?id=50922 , should we see
reports that we really need to do it).

Reviewed by:	mav
MFC after:	3 months
Differential Revision:	https://reviews.freebsd.org/D18300
2018-12-11 05:10:22 +00:00
Warner Losh
4668666fe4 Implement ability to turn on/off PHYs for AHCI devices.
As part of Chuck's work on fixing kernel crashes caused by disk I/O
errors, it is useful to be able to trigger various kinds of
errors. This patch allows causing an AHCI-attached disk to disappear,
by having the driver keep the PHY disabled when the driver would
otherwise enable the PHY. It also allows making the disk reappear by
having the driver go back to setting the PHY enable/disable state as
it normal would and simulating the hardware event that causes a bus
rescan.

Submitted by: Chuck Silvers
Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D16043
2018-11-03 00:37:51 +00:00
Martin Wilke
f5a7a8cd67 - Add quirk for Samsung on Mac Mini 7,1
PR:		201676
Submitted by:	Ruben Kerkhof
Approved by:	araujo (mentor)
Obtained from:	TrueOS
Sponsored by:	iXsystems Inc.
Differential Revision:	https://review.freebsd.org/D17815
2018-11-02 07:48:23 +00:00
Warner Losh
329e817fcc Reapply, with minor tweaks, r338025, from the original commit:
Remove unused and easy to misuse PNP macro parameter

Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely.  The 'table' parameter is now required to
have correct pointer (or array) type.  Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.

Mostly done with the coccinelle 'spatch' tool:

  $ cat modpnpsize0.cocci
    @normaltables@
    identifier b,c;
    expression a,d,e;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,d,
    -sizeof(d[0]),
     e);

    @singletons@
    identifier b,c,d;
    expression a;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,&d,
    -sizeof(d),
     1);

  $ rg -l MODULE_PNP_INFO -- sys | \
    xargs spatch --in-place --sp-file modpnpsize0.cocci

(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not.  So I had to link gdiff into
PATH as diff to use spatch.)

Tinderbox'd (-DMAKE_JUST_KERNELS).
Approved by: re (glen)
2018-09-26 17:12:14 +00:00
Conrad Meyer
b8e771e97a Back out r338035 until Warner is finished churning GSoC PNP patches
I was not aware Warner was making or planning to make forward progress in
this area and have since been informed of that.

It's easy to apply/reapply when churn dies down.
2018-08-19 00:46:22 +00:00
Conrad Meyer
faa319436f Remove unused and easy to misuse PNP macro parameter
Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely.  The 'table' parameter is now required to
have correct pointer (or array) type.  Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.

Mostly done with the coccinelle 'spatch' tool:

  $ cat modpnpsize0.cocci
    @normaltables@
    identifier b,c;
    expression a,d,e;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,d,
    -sizeof(d[0]),
     e);

    @singletons@
    identifier b,c,d;
    expression a;
    declarer MODULE_PNP_INFO;
    @@
     MODULE_PNP_INFO(a,b,c,&d,
    -sizeof(d),
     1);

  $ rg -l MODULE_PNP_INFO -- sys | \
    xargs spatch --in-place --sp-file modpnpsize0.cocci

(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not.  So I had to link gdiff into
PATH as diff to use spatch.)

Tinderbox'd (-DMAKE_JUST_KERNELS).
2018-08-19 00:22:21 +00:00
Leandro Lupori
33dc803991 Fixed endianess issue in AHCI driver
There were some bits that were being set in cmd_flags (a field of AHCI's
command list structure) after cmd_flags was converted to little endian.
On a big endian host, such as PowerPC, this would set the wrong bits.
This was preventing AHCI driver from working on these hosts.

Reviewed by:	jhibbits
Approved by:	jhibbits (mentor)
2018-07-27 13:11:05 +00:00
Mark Johnston
ca0a66ba34 Add PCI IDs for AMD X370 AHCI and XHCI.
Submitted by:	Greg V <greg@unrelenting.technology>
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D15398
2018-07-12 18:44:00 +00:00
Warner Losh
491589f3af Add PNP info to the PCI attachment of the ahci driver
Mark the PNP table, but still need to handle the CLASS / SUBCLASS /
REVID matching.

Reviewed by: imp, chuck
Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com>
Sponsored by: Google, Inc. (GSoC 2018)
2018-06-13 20:25:04 +00:00
Marcin Wojtas
c58ed0b07f Fix kernel modules names for Marvell armv7
Two modules with the same name cannot be loaded, so Marvell specific drivers
cannot have the same name as the generic drivers.
Files with the same name, even in different folders overlaps their .o files,
so in order to prepare for supporting Marvell platforms in GENERIC armv7
config, modify conflicting names.

Submitted by: Rafal Kozik <rk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D14743
2018-04-03 23:49:35 +00:00
Conrad Meyer
66ad253880 Add AHCI/XHCI device IDs found on AMD 1950X+X399 system
A follow-up to r327094.

Sponsored by:	Dell EMC Isilon
2017-12-29 22:24:41 +00:00
Alexander Motin
d171d2f281 Add AHCI/XHCI device IDs found on AMD Ryzen+B350 system.
MFC after:	2 weeks
2017-12-22 20:44:21 +00:00
Pedro F. Giffuni
718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00
Alexander Motin
ede4c91d7b Add some PCI IDs found on AMD Epyc system.
MFC after:	2 weeks
2017-11-09 10:15:57 +00:00
Ian Lepore
74eb18b6cc Define a single instance of ahci_devclass and reference it from all the
attachment code for various SOCs and busses.  Remove all the static and
should-have-been-static and named-differently instances of it.

This should eliminate the recently-grown build warnings about multiple
definitions when building arm kernels.
2017-10-02 02:58:28 +00:00
Marcin Wojtas
e75791056b Add support for AHCI in Armada 3700
This patch simply AHCI generic driver by extending compatible list.

Submitted by: Patryk Duda <pdk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Semihalf
Differential Revision: https://reviews.freebsd.org/D12254
2017-09-09 11:01:44 +00:00
Alexander Motin
2b2a6eb95e Missing remanant of 322309.
MFC after:	1 week
2017-08-09 13:46:16 +00:00
Alexander Motin
6750c3d0fa Use "Ibex Peak" codename for "5 Series/3400 Series" chipsets.
This is shorter and unifies naming with later chipsets.

MFC after:	1 week
2017-08-09 12:21:17 +00:00
Alexander Motin
aaa9b2b3f3 Add new Intel Lewisburg and Union Point chipset PCI IDs.
While there, polish some old AHCI ones, since they are still reused.

MFC after:	1 week
2017-08-09 12:03:12 +00:00
Alexander Motin
eb76cfbcb7 Add some device IDs for Intel Denverton SoCs. 2017-06-21 00:30:57 +00:00
Olivier Houchard
b05e505d6d Check if the device is marked as dma-coherent in the FDT, and if so, let
busdma know, so that on architectures where dma isn't always coherent, we
know we don't have to write-back/invalidates cachelines on DMA operations.

Reviewed by:	andrew, mav
2017-04-26 16:13:22 +00:00
Alexander Motin
7ce9096841 Block FPDMA TRIM for ASMedia HBAs.
Experiments show FPDMA TRIM command timeouts on ASMedia HBAs, while the
same SSDs working fine on Intel HBAs.

MFC after:	2 weeks
2017-04-18 08:04:15 +00:00
Alexander Motin
950c5aca4a Remove dead mentions of CAM target mode APIs from drivers.
This makes grepping kernel for target mode implementation much easier.
2017-02-19 17:27:58 +00:00
Alexander Motin
72dc1ba904 Partially workaround ASMedia HBA error recovery.
Taking closer look on my ASM1062 I found that it has bunch of issues around
error recovery: reported wrong CCS, failed commands reported as completed,
READ LOG EXT times out after NCQ error.  This patch workarounds first two
problems, that were making ATAPI devices close to unusable on these HBAs.

MFC after:	2 weeks
2017-01-25 18:16:17 +00:00
Wojciech Macek
f09f75fec6 Extend AHCI_Q_BIT_STRING after adding new quirk for soft
reset delay

Adding new quirk (AHCI_Q_MRVL_SR_DEL) requires according extention
of AHCI_Q_BIT_STRING.

Submitted by:  Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by:  Stormshield
Reviewed by:   wma
2017-01-25 12:18:21 +00:00
Wojciech Macek
5f55eefb91 Add support for AHCI on ARMADA38X
This file provides support for AHCI mode on Armada38x
and adds new optional AHCI device to arm/mv/files.mv.

Submitted by:          Konrad Adamczyk <ka@semihalf.com>
Obtained from:         Semihalf
Sponsored by:          Stormshield
Reviewed by:           zbb
Differential revision: https://reviews.freebsd.org/D9222
2017-01-25 10:34:37 +00:00
Wojciech Macek
a569f640e3 Enable optional soft reset in AHCI
It occurred that some Marvell integrated controllers
require additional time after soft reset to work properly.
Introduce new quirk (AHCI_Q_MRVL_SR_DEL), that enable
such operation.

Submitted by:          Konrad Adamczyk <ka@semihalf.com>
Obtained from:         Semihalf
Sponsored by:          Stormshield
Reviewed by:           mav
Differential revision: https://reviews.freebsd.org/D9221
2017-01-25 10:32:57 +00:00
Andrew Turner
2647410d05 Add an ACPI attachment to the existing ahci_generic driver. This is used
in some arm64 hardware, for example the AMD Opteron A1100.

Reviewed by:	mav
Obtained from:	ABT Systems Ltd
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D8852
2017-01-10 10:56:33 +00:00
Alan Somers
4195c7de24 Always null-terminate ccb_pathinq.(sim_vid|hba_vid|dev_name)
The sim_vid, hba_vid, and dev_name fields of struct ccb_pathinq are
fixed-length strings. AFAICT the only place they're read is in
sbin/camcontrol/camcontrol.c, which assumes they'll be null-terminated.
However, the kernel doesn't null-terminate them. A bunch of copy-pasted code
uses strncpy to write them, and doesn't guarantee null-termination. For at
least 4 drivers (mpr, mps, ciss, and hyperv), the hba_vid field actually
overflows. You can see the result by doing "camcontrol negotiate da0 -v".

This change null-terminates those fields everywhere they're set in the
kernel. It also shortens a few strings to ensure they'll fit within the
16-character field.

PR:		215474
Reported by:	Coverity
CID:		1009997 1010000 1010001 1010002 1010003 1010004 1010005
CID:		1331519 1010006 1215097 1010007 1288967 1010008 1306000
CID:		1211924 1010009 1010010 1010011 1010012 1010013 1010014
CID:		1147190 1010017 1010016 1010018 1216435 1010020 1010021
CID:		1010022 1009666 1018185 1010023 1010025 1010026 1010027
CID:		1010028 1010029 1010030 1010031 1010033 1018186 1018187
CID:		1010035 1010036 1010042 1010041 1010040 1010039
Reviewed by:	imp, sephe, slm
MFC after:	4 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D9037
Differential Revision:	https://reviews.freebsd.org/D9038
2017-01-04 20:26:42 +00:00
Alexander Motin
de4a194549 Add more ASMedia PCI IDs from different sources.
Exact device names are not clear, but its better then nothing at all.

MFC after:	1 month
2016-11-28 16:25:05 +00:00
Alexander Motin
6ddb10bd0c Process port interrupt even is PxIS register is zero.
ASMedia ASM1062 AHCI chips with some fancy firmware handling PMP inside
seems sometimes forgeting to set bits in PxIS, causing command timeouts.
Removal of this check fixes the issue by the theoretical cost of slightly
higher CPU usage in some odd cases, but this is what Linux does too.

MFC after:	1 month
2016-11-28 16:23:32 +00:00
Alexander Motin
07c3504304 Fix channel initialization in FBS mode.
Due to reading initialized variable, FIS receive area was always allocated
as 256 bytes, suitable for command-based switching, instead of 4096 bytes,
required for FIS-based switching.  This caused memory corruption in case of
port multipliers used on FBS-capable HBAs (Marvell).

MFC after:	1 week
2016-09-07 13:51:34 +00:00
Andriy Gapon
6975a721d1 JMicron JMB361 has only a single SATA port
Discussed with:	mav
MFC after:	3 days
2016-08-20 09:13:14 +00:00
Alexander Motin
e50f405eca In AHCI_IRQ_MODE_AFTER mode do not clear interrupts below.
This is probably a NOP change since IS register is not activery used for
interrupts below the shared, but it looked odd to clear interrupts we did
not handle.
2016-07-17 12:45:58 +00:00
Alexander Motin
eaf4f6fe69 Do not consider the last interrupt shared if there are enough interrupts
for all channels.
2016-07-17 12:31:31 +00:00
Alexander Motin
feae851874 Fix ahci(4) driver attach to controller with 32 ports.
Incorrect sign expansion in variables that supposed to be a bit fields
caused infinite loop.  Fixing this allows system properly detect maximal
possible 32 devices configured on AHCI HBA of BHyVe.  That case did not
happen in a wild before due to lack of hardware AHCI HBAs with 32 ports.

Approved by:	re (gjb@)
MFC after:	1 week
2016-07-07 22:10:10 +00:00
Kenneth D. Merry
9a6844d55f Add support for managing Shingled Magnetic Recording (SMR) drives.
This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.

This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).

This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)

Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.

Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set.  You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.

Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity.  In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged.  For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.

Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation.  I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated.  These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers.  Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.

Thanks to Seagate for supplying the test hardware and answering questions.

sbin/camcontrol/Makefile:
	Add epc.c and zone.c.

sbin/camcontrol/camcontrol.8:
	Document the zone and epc subcommands.

sbin/camcontrol/camcontrol.c:
	Add the zone and epc subcommands.

	Add auxiliary register support to build_ata_cmd().  Make sure to
	set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
	flags as appropriate for ATA commands.

	Add a new get_ata_status() function to parse ATA result from SCSI
	sense descriptors (for ATA passthrough over SCSI) and ATA I/O
	requests.

sbin/camcontrol/camcontrol.h:
	Update the build_ata_cmd() prototype

	Add get_ata_status(), zone(), and epc().

sbin/camcontrol/epc.c:
	Support for ATA Extended Power Conditions features.  This includes
	support for all features documented in the ACS-4 Revision 12
	specification from t13.org (dated February 18, 2016).

	The EPC feature set allows putting a drive into a power power mode
	immediately, or setting timeouts so that the drive will
	automatically enter progressively lower power states after various
	idle times.

sbin/camcontrol/fwdownload.c:
	Update the firmware download code for the new build_ata_cmd()
	arguments.

sbin/camcontrol/zone.c:
	Implement support for Shingled Magnetic Recording (SMR) drives
	via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
	Command Set (ZAC).

	These specs were developed in concert, and are functionally
	identical.  The primary differences are due to SCSI and ATA
	differences.  (SCSI is big endian, ATA is little endian, for
	example.)

	This includes support for all commands defined in the ZBC and
	ZAC specs.

sys/cam/ata/ata_all.c:
	Decode a number of additional ATA command names in ata_op_string().

	Add a new CCB building function, ata_read_log().

	Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
	functions.  These support both DMA and NCQ encapsulation.

sys/cam/ata/ata_all.h:
	Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
	ata_zac_mgmt_in().

sys/cam/ata/ata_da.c:
	Revamp the ada(4) driver to support zoned devices.

	Add four new probe states to gather information needed for zone
	support.

	Add a new adasetflags() function to avoid duplication of large
	blocks of flag setting between the async handler and register
	functions.

	Add new sysctl variables that describe zone support and paramters.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

sys/cam/scsi/scsi_all.c:
	Add command descriptions for the ZBC IN/OUT commands.

	Add descriptions for ZBC Host Managed devices.

	Add a new function, scsi_ata_pass() to do ATA passthrough over
	SCSI.  This will eventually replace scsi_ata_pass_16() -- it
	can create the 12, 16, and 32-byte variants of the ATA
	PASS-THROUGH command, and supports setting all of the
	registers defined as of SAT-4, Revision 5 (March 11, 2016).

	Change scsi_ata_identify() to use scsi_ata_pass() instead of
	scsi_ata_pass_16().

	Add a new scsi_ata_read_log() function to facilitate reading
	ATA logs via SCSI.

sys/cam/scsi/scsi_all.h:
	Add the new ATA PASS-THROUGH(32) command CDB.  Add extended and
	variable CDB opcodes.

	Add Zoned Block Device Characteristics VPD page.

	Add ATA Return SCSI sense descriptor.

	Add prototypes for scsi_ata_read_log() and scsi_ata_pass().

sys/cam/scsi/scsi_da.c:
	Revamp the da(4) driver to support zoned devices.

	Add five new probe states, four of which are needed for ATA
	devices.

	Add five new sysctl variables that describe zone support and
	parameters.

	The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
	devices when they are attached via a SCSI to ATA Translation (SAT)
	layer.  Since ZBC -> ZAC translation is a new feature in the T10
	SAT-4 spec, most SATA drives will be supported via ATA commands
	sent via the SCSI ATA PASS-THROUGH command.  The da(4) driver will
	prefer the ZBC interface, if it is available, for performance
	reasons, but will use the ATA PASS-THROUGH interface to the ZAC
	command set if the SAT layer doesn't support translation yet.
	As I mentioned above, ZBC command support is untested.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

	Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.

	Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
	building functions.  Note that these have return values, unlike
	almost all other CCB building functions in CAM.  The reason is
	that they can fail, depending upon the particular combination
	of input parameters.  The primary failure case is if the user
	wants NCQ, but fails to specify additional CDB storage.  NCQ
	requires using the 32-byte version of the SCSI ATA PASS-THROUGH
	command, and the current CAM CDB size is 16 bytes.

sys/cam/scsi/scsi_da.h:
	Add ZBC IN and ZBC OUT CDBs and opcodes.

	Add SCSI Report Zones data structures.

	Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
	scsi_ata_zac_mgmt_in() prototypes.

sys/dev/ahci/ahci.c:
	Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.

	ahci_setup_fis() previously set the top bits of the sector count
	register in the FIS to 0 for FPDMA commands.  This is okay for
	read and write, because the PRIO field is in the only thing in
	those bits, and we don't implement that further up the stack.

	But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
	byte, so it needs to be transmitted to the drive.

	In ahci_setup_fis(), always set the the top 8 bits of the
	sector count register.  We need it in both the standard
	and NCQ / FPDMA cases.

sys/geom/eli/g_eli.c:
	Pass BIO_ZONE commands through the GELI class.

sys/geom/geom.h:
	Add g_io_zonecmd() prototype.

sys/geom/geom_dev.c:
	Add new DIOCZONECMD ioctl, which allows sending zone commands to
	disks.

sys/geom/geom_disk.c:
	Add support for BIO_ZONE commands.

sys/geom/geom_disk.h:
	Add a new flag, DISKFLAG_CANZONE, that indicates that a given
	GEOM disk client can handle BIO_ZONE commands.

sys/geom/geom_io.c:
	Add a new function, g_io_zonecmd(), that handles execution of
	BIO_ZONE commands.

	Add permissions check for BIO_ZONE commands.

	Add command decoding for BIO_ZONE commands.

sys/geom/geom_subr.c:
	Add DDB command decoding for BIO_ZONE commands.

sys/kern/subr_devstat.c:
	Record statistics for REPORT ZONES commands.  Note that the
	number of bytes transferred for REPORT ZONES won't quite match
	what is received from the harware.  This is because we're
	necessarily counting bytes coming from the da(4) / ada(4) drivers,
	which are using the disk_zone.h interface to communicate up
	the stack.  The structure sizes it uses are slightly different
	than the SCSI and ATA structure sizes.

sys/sys/ata.h:
	Add many bit and structure definitions for ZAC, NCQ, and EPC
	command support.

sys/sys/bio.h:
	Convert the bio_cmd field to a straight enumeration.  This will
	yield more space for additional commands in the future.  After
	change r297955 and other related changes, this is now possible.
	Converting to an enumeration will also prevent use as a bitmask
	in the future.

sys/sys/disk.h:
	Define the DIOCZONECMD ioctl.

sys/sys/disk_zone.h:
	Add a new API for managing zoned disks.  This is very close to
	the SCSI ZBC and ATA ZAC standards, but uses integers in native
	byte order instead of big endian (SCSI) or little endian (ATA)
	byte arrays.

	This is intended to offer to the complete feature set of the ZBC
	and ZAC disk management without requiring the application developer
	to include SCSI or ATA headers.  We also use one set of headers
	for ioctl consumers and kernel bio-level consumers.

sys/sys/param.h:
	Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
	of SMR support.

usr.sbin/Makefile:
	Add the zonectl utility.

usr.sbin/diskinfo/diskinfo.c
	Add disk zoning capability to the 'diskinfo -v' output.

usr.sbin/zonectl/Makefile:
	Add zonectl makefile.

usr.sbin/zonectl/zonectl.8
	zonectl(8) man page.

usr.sbin/zonectl/zonectl.c
	The zonectl(8) utility.  This allows managing SCSI or ATA zoned
	disks via the disk_zone.h API.  You can report zones, reset write
	pointers, get parameters, etc.

Sponsored by:	Spectra Logic
Differential Revision:	https://reviews.freebsd.org/D6147
Reviewed by:	wblock (documentation)
2016-05-19 14:08:36 +00:00
Alexander Motin
71733a504f Add some device IDs from Intel Sunrise Point chipsets.
MFC after:	2 weeks
2016-05-03 15:27:47 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Warner Losh
916d57dfc5 Implement Auxiliary register. Add PIM_ATA_EXT flag to flag that a SIM
can handle it, and add the code to add it to the FIS that's sent to
the drive. The mvs driver is the only other ATA driver in the system,
and its hardware doesn't appear to support setting the Auxiliary
register.

Differential Revision: https://reviews.freebsd.org/D5598
2016-04-17 05:24:36 +00:00
Warner Losh
a6e0c5da99 New CAM I/O scheduler for FreeBSD. The default I/O scheduler is the same
as before. The common scheduling bits have moved from inline code in
each of the CAM periph drivers into a library that implements the
default scheduling.

In addition, a number of rate-limiting and I/O preference options can
be enabled by adding CAM_IOSCHED_NETFLIX to your config file. A number
of extra stats are also maintained. CAM_IOSCHED_NETFLIX isn't on by
default because it uses a separate BIO_READ and BIO_WRITE queue, so
doesn't honor BIO_ORDERED between these two types of operations. We
already didn't honor it for BIO_DELETE, and we don't depend on
BIO_ORDERED between reads and writes anywhere in the system (it is
currently used with BIO_FLUSH in ZFS to make sure some writes are
complete before others start and as a poor-man's soft dependency in
one place in UFS where we won't be issuing READs until after the
operation completes). However, out of an abundance of caution, it
isn't enabled by default.

Plus, this also brings in NCQ TRIM support for those SSDs that support
it. A black list is also provided for known rogues that use NCQ trim
as an excuse to corrupt the drive. It was difficult to separate out
into a separate commit.

This code has run in production at Netflix for over a year now.

Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D4609
2016-04-14 21:47:58 +00:00
Alexander Motin
20a908e032 Add hint.ahci.X.quirks tunable for some odd cases.
MFC after:	2 weeks
2016-04-13 12:32:58 +00:00
Pedro F. Giffuni
74b8d63dcc Cleanup unnecessary semicolons from the kernel.
Found with devel/coccinelle.
2016-04-10 23:07:00 +00:00
Zbigniew Bodek
5bf8f18273 Disable MSI-x for AHCI on Alpine plattform
Changes introduced to AHCI code adding support for MSI-x
caused interrupt storm on Alpine boards.
This is unintended behaviour so added quirk to omit this functionality.

Reviewed by:   mav
Submitted by:  Marcin Mazurek <mma@semihalf.com>
Obtained from: Semihalf
Sponsored by:  Annapurna Labs
Differential Revision: https://reviews.freebsd.org/D4301
2016-03-31 11:18:52 +00:00