Commit Graph

323 Commits

Author SHA1 Message Date
Andrew Gallatin
28d0a740dd ktls: auto-disable ifnet (inline hw) kTLS
Ifnet (inline) hw kTLS NICs typically keep state within
a TLS record, so that when transmitting in-order,
they can continue encryption on each segment sent without
DMA'ing extra state from the host.

This breaks down when transmits are out of order (eg,
TCP retransmits).  In this case, the NIC must re-DMA
the entire TLS record up to and including the segment
being retransmitted.  This means that when re-transmitting
the last 1448 byte segment of a TLS record, the NIC will
have to re-DMA the entire 16KB TLS record. This can lead
to the NIC running out of PCIe bus bandwidth well before
it saturates the network link if a lot of TCP connections have
a high retransmoit rate.

This change introduces a new sysctl (kern.ipc.tls.ifnet_max_rexmit_pct),
where TCP connections with higher retransmit rate will be
switched to SW kTLS so as to conserve PCIe bandwidth.

Reviewed by:	hselasky, markj, rrs
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D30908
2021-07-06 10:28:32 -04:00
Randall Stewart
9e4d9e4c4d tcp: Preparation for allowing hardware TLS to be able to kick a tcp connection that is retransmitting too much out of hardware and back to software.
Hardware TLS is now supported in some interface cards and it works well. Except that
when we have connections that retransmit a lot we get into trouble with all the retransmits.
This prep step makes way for change that Drew will be making so that we can "kick out" a
session from hardware TLS.

Reviewed by: mtuexen, gallatin
Sponsored by: Netflix Inc
Differential Revision: https://reviews.freebsd.org/D30895
2021-06-25 09:30:54 -04:00
Randall Stewart
67e892819b tcp: Mbuf leak while holding a socket buffer lock.
When running at NF the current Rack and BBR changes with the recent
commits from Richard that cause the socket buffer lock to be held over
the ip_output() call and then finally culminating in a call to tcp_handle_wakeup()
we get a lot of leaked mbufs. I don't think that this leak is actually caused
by holding the lock or what Richard has done, but is exposing some other
bug that has probably been lying dormant for a long time. I will continue to
look (using his changes) at what is going on to try to root cause out the issue.

In the meantime I can't leave the leaks out for everyone else. So this commit
will revert all of Richards changes and move both Rack and BBR back to just
doing the old sorwakeup_locked() calls after messing with the so_rcv buffer.

We may want to look at adding back in Richards changes after I have pinpointed
the root cause of the mbuf leak and fixed it.

Reviewed by: mtuexen,rscheff
Sponsored by: Netflix Inc
Differential Revision:	https://reviews.freebsd.org/D30704
2021-06-10 08:33:57 -04:00
Richard Scheffenegger
032bf749fd [tcp] Keep socket buffer locked until upcall
r367492 would unlock the socket buffer before eventually calling the upcall.
This leads to problematic interaction with NFS kernel server/client components
(MP threads) accessing the socket buffer with potentially not correctly updated
state.

Reported by: rmacklem
Reviewed By: tuexen, #transport
Tested by: rmacklem, otis
MFC after: 2 weeks
Sponsored By: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D29690
2021-05-21 11:07:51 +02:00
Richard Scheffenegger
0471a8c734 tcp: SACK Lost Retransmission Detection (LRD)
Recover from excessive losses without reverting to a
retransmission timeout (RTO). Disabled by default, enable
with sysctl net.inet.tcp.do_lrd=1

Reviewed By: #transport, rrs, tuexen, #manpages
Sponsored by: Netapp, Inc.
Differential Revision: https://reviews.freebsd.org/D28931
2021-05-10 19:06:20 +02:00
Randall Stewart
5d8fd932e4 This brings into sync FreeBSD with the netflix versions of rack and bbr.
This fixes several breakages (panics) since the tcp_lro code was
committed that have been reported. Quite a few new features are
now in rack (prefecting of DGP -- Dynamic Goodput Pacing among the
largest). There is also support for ack-war prevention. Documents
comming soon on rack..

Sponsored by:           Netflix
Reviewed by:		rscheff, mtuexen
Differential Revision:	https://reviews.freebsd.org/D30036
2021-05-06 11:22:26 -04:00
Hans Petter Selasky
9ca874cf74 Add TCP LRO support for VLAN and VxLAN.
This change makes the TCP LRO code more generic and flexible with regards
to supporting multiple different TCP encapsulation protocols and in general
lays the ground for broader TCP LRO support. The main job of the TCP LRO code is
to merge TCP packets for the same flow, to reduce the number of calls to upper
layers. This reduces CPU and increases performance, due to being able to send
larger TSO offloaded data chunks at a time. Basically the TCP LRO makes it
possible to avoid per-packet interaction by the host CPU.

Because the current TCP LRO code was tightly bound and optimized for TCP/IP
over ethernet only, several larger changes were needed. Also a minor bug was
fixed in the flushing mechanism for inactive entries, where the expire time,
"le->mtime" was not always properly set.

To avoid having to re-run time consuming regression tests for every change,
it was chosen to squash the following list of changes into a single commit:
- Refactor parsing of all address information into the "lro_parser" structure.
  This easily allows to reuse parsing code for inner headers.
- Speedup header data comparison. Don't compare field by field, but
  instead use an unsigned long array, where the fields get packed.
- Refactor the IPv4/TCP/UDP checksum computations, so that they may be computed
  recursivly, only applying deltas as the result of updating payload data.
- Make smaller inline functions doing one operation at a time instead of
  big functions having repeated code.
- Refactor the TCP ACK compression code to only execute once
  per TCP LRO flush. This gives a minor performance improvement and
  keeps the code simple.
- Use sbintime() for all time-keeping. This change also fixes flushing
  of inactive entries.
- Try to shrink the size of the LRO entry, because it is frequently zeroed.
- Removed unused TCP LRO macros.
- Cleanup unused TCP LRO statistics counters while at it.
- Try to use __predict_true() and predict_false() to optimise CPU branch
  predictions.

Bump the __FreeBSD_version due to changing the "lro_ctrl" structure.

Tested by:	Netflix
Reviewed by:	rrs (transport)
Differential Revision:	https://reviews.freebsd.org/D29564
MFC after:	2 week
Sponsored by:	Mellanox Technologies // NVIDIA Networking
2021-04-20 13:36:22 +02:00
Michael Tuexen
9e644c2300 tcp: add support for TCP over UDP
Adding support for TCP over UDP allows communication with
TCP stacks which can be implemented in userspace without
requiring special priviledges or specific support by the OS.
This is joint work with rrs.

Reviewed by:		rrs
Sponsored by:		Netflix, Inc.
MFC after:		1 week
Differential Revision:	https://reviews.freebsd.org/D29469
2021-04-18 16:16:42 +02:00
Richard Scheffenegger
d1de2b05a0 tcp: Rename rfc6675_pipe to sack.revised, and enable by default
As full support of RFC6675 is in place, deprecating
net.inet.tcp.rfc6675_pipe and enabling by default
net.inet.tcp.sack.revised.

Reviewed By: #transport, kbowling, rrs
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D28702
2021-04-17 14:59:45 +02:00
Richard Scheffenegger
90cca08e91 tcp: Prepare PRR to work with NewReno LossRecovery
Add proper PRR vnet declarations for consistency.
Also add pointer to tcpopt struct to tcp_do_prr_ack, in preparation
for it to deal with non-SACK window reduction (after loss).

No functional change.

MFC after: 2 weeks
Reviewed By: tuexen, #transport
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D29440
2021-04-08 19:16:31 +02:00
Richard Scheffenegger
eb3a59a831 tcp: Refactor PRR code
No functional change intended.

MFC after: 2 weeks
Reviewed By: #transport, rrs
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D29411
2021-03-26 00:01:34 +01:00
Richard Scheffenegger
e53138694a tcp: Add prr_out in preparation for PRR/nonSACK and LRD
Reviewed By:           #transport, kbowling
MFC after:             3 days
Sponsored By:          Netapp, Inc.
Differential Revision: https://reviews.freebsd.org/D29058
2021-03-06 00:38:22 +01:00
Randall Stewart
69a34e8d02 Update the LRO processing code so that we can support
a further CPU enhancements for compressed acks. These
are acks that are compressed into an mbuf. The transport
has to be aware of how to process these, and an upcoming
update to rack will do so. You need the rack changes
to actually test and validate these since if the transport
does not support mbuf compression, then the old code paths
stay in place. We do in this commit take out the concept
of logging if you don't have a lock (which was quite
dangerous and was only for some early debugging but has
been left in the code).

Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D28374
2021-02-17 10:41:01 -05:00
Michael Tuexen
d2b3ceddcc tcp: add sysctl to tolerate TCP segments missing timestamps
When timestamp support has been negotiated, TCP segements received
without a timestamp should be discarded. However, there are broken
TCP implementations (for example, stacks used by Omniswitch 63xx and
64xx models), which send TCP segments without timestamps although
they negotiated timestamp support.
This patch adds a sysctl variable which tolerates such TCP segments
and allows to interoperate with broken stacks.

Reviewed by:		jtl@, rscheff@
Differential Revision:	https://reviews.freebsd.org/D28142
Sponsored by:		Netflix, Inc.
PR:			252449
MFC after:		1 week
2021-01-14 19:28:25 +01:00
Richard Scheffenegger
0e1d7c25c5 Add TCP feature Proportional Rate Reduction (PRR) - RFC6937
PRR improves loss recovery and avoids RTOs in a wide range
of scenarios (ACK thinning) over regular SACK loss recovery.

PRR is disabled by default, enable by net.inet.tcp.do_prr = 1.
Performance may be impeded by token bucket rate policers at
the bottleneck, where net.inet.tcp.do_prr_conservate = 1
should be enabled in addition.

Submitted by:	Aris Angelogiannopoulos
Sponsored by:	NetApp, Inc.
Differential Revision:	https://reviews.freebsd.org/D18892
2020-12-04 11:29:27 +00:00
Richard Scheffenegger
4d0770f172 Prevent premature SACK block transmission during loss recovery
Under specific conditions, a window update can be sent with
outdated SACK information. Some clients react to this by
subsequently delaying loss recovery, making TCP perform very
poorly.

Reported by:	chengc_netapp.com
Reviewed by:	rrs, jtl
MFC after:	2 weeks
Sponsored by:	NetApp, Inc.
Differential Revision:	https://reviews.freebsd.org/D24237
2020-11-08 18:47:05 +00:00
John Baldwin
ce39811544 Save the current TCP pacing rate in t_pacing_rate.
Reviewed by:	gallatin, gnn
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D26875
2020-10-29 00:03:19 +00:00
Richard Scheffenegger
5432120028 Extend netstat to display TCP stack and detailed congestion state (2)
Extend netstat to display TCP stack and detailed congestion state

Adding the "-c" option used to show detailed per-connection
congestion control state for TCP sessions.

This is one summary patch, which adds the relevant variables into
xtcpcb. As previous "spare" space is used, these changes are ABI
compatible.

Reviewed by:	tuexen
MFC after:	2 weeks
Sponsored by:	NetApp, Inc.
Differential Revision:	https://reviews.freebsd.org/D26518
2020-10-09 10:55:19 +00:00
Michael Tuexen
42d7560796 Export the name of the congestion control. This will be used by sockstat
and netstat.

Reviewed by:		rscheff
MFC after:		1 week
Sponsored by:		Netflix, Inc.
Differential Revision:	https://reviews.freebsd.org/D26412
2020-09-13 09:06:50 +00:00
Richard Scheffenegger
f359d6ebbc Improve SACK support code for RFC6675 and PRR
Adding proper accounting of sacked_bytes and (per-ACK)
delivered data to the SACK scoreboard. This will
allow more aspects of RFC6675 to be implemented as well
as Proportional Rate Reduction (RFC6937).

Prior to this change, the pipe calculation controlled with
net.inet.tcp.rfc6675_pipe was also susceptible to incorrect
results when more than 3 (or 4) holes in the sequence space
were present, which can no longer all fit into a single
ACK's SACK option.

Reviewed by:	kbowling, rgrimes (mentor)
Approved by:	rgrimes (mentor, blanket)
MFC after:	3 weeks
Sponsored by:	NetApp, Inc.
Differential Revision:	https://reviews.freebsd.org/D18624
2020-08-13 16:30:09 +00:00
Richard Scheffenegger
9dc7d8a246 TCP: make after-idle work for transactional sessions.
The use of t_rcvtime as proxy for the last transmission
fails for transactional IO, where the client requests
data before the server can respond with a bulk transfer.

Set aside a dedicated variable to actually track the last
locally sent segment going forward.

Reported by:	rrs
Reviewed by:	rrs, tuexen (mentor)
Approved by:	tuexen (mentor), rgrimes (mentor)
MFC after:	2 weeks
Sponsored by:	NetApp, Inc.
Differential Revision:	https://reviews.freebsd.org/D25016
2020-06-24 13:42:42 +00:00
Randall Stewart
e854dd38ac An important statistic in determining if a server process (or client) is being delayed
is to know the time to first byte in and time to first byte out. Currently we
have no way to know these all we have is t_starttime. That (t_starttime) tells us
what time the 3 way handshake completed. We don't know when the first
request came in or how quickly we responded. Nor from a client perspective
do we know how long from when we sent out the first byte before the
server responded.

This small change adds the ability to track the TTFB's. This will show up in
BB logging which then can be pulled for later analysis. Note that currently
the tracking is via the ticks variable of all three variables. This provides
a very rough estimate (hz=1000 its 1ms). A follow-on set of work will be
to change all three of these values into something with a much finer resolution
(either microseconds or nanoseconds), though we may want to make the resolution
configurable so that on lower powered machines we could still use the much
cheaper ticks variable.

Sponsored by:	Netflix Inc.
Differential Revision:	https://reviews.freebsd.org/D24902
2020-06-08 11:48:07 +00:00
Randall Stewart
d3b6c96b7d Adjust the fb to have a way to ask the underlying stack
if it can support the PRUS option (OOB). And then have
the new function call that to validate and give the
correct error response if needed to the user (rack
and bbr do not support obsoleted OOB data).

Sponsoered by: Netflix Inc.
Differential Revision:	 https://reviews.freebsd.org/D24574
2020-05-04 20:19:57 +00:00
Randall Stewart
e570d231f4 This change does a small prepratory step in getting the
latest rack and bbr in from the NF repo. When those come
in the OOB data handling will be fixed where Skyzaller crashes.

Differential Revision:	https://reviews.freebsd.org/D24575
2020-04-27 16:30:29 +00:00
Michael Tuexen
b89af8e16d Improve the TCP blackhole detection. The principle is to reduce the
MSS in two steps and try each candidate two times. However, if two
candidates are the same (which is the case in TCP/IPv6), this candidate
was tested four times. This patch ensures that each candidate actually
reduced the MSS and is only tested 2 times. This reduces the time window
of missclassifying a temporary outage as an MTU issue.

Reviewed by:		jtl
MFC after:		1 week
Sponsored by:		Netflix, Inc.
Differential Revision:	https://reviews.freebsd.org/D24308
2020-04-14 16:35:05 +00:00
Michael Tuexen
7ca6e2963f Use KMOD_TCPSTAT_INC instead of TCPSTAT_INC for RACK and BBR, since
these are kernel modules. Also add a KMOD_TCPSTAT_ADD and use that
instead of TCPSTAT_ADD.

Reviewed by:		jtl@, rrs@
MFC after:		1 week
Sponsored by:		Netflix, Inc.
Differential Revision:	https://reviews.freebsd.org/D23904
2020-03-12 15:37:41 +00:00
Michael Tuexen
a357466592 sack_newdata and snd_recover hold the same value. Therefore, use only
a single instance: use snd_recover also where sack_newdata was used.

Submitted by:		Richard Scheffenegger
Differential Revision:	https://reviews.freebsd.org/D18811
2020-02-13 15:14:46 +00:00
Randall Stewart
481be5de9d White space cleanup -- remove trailing tab's or spaces
from any line.

Sponsored by:	Netflix Inc.
2020-02-12 13:31:36 +00:00
Bjoern A. Zeeb
334fc5822b vnet: virtualise more network stack sysctls.
Virtualise tcp_always_keepalive, TCP and UDP log_in_vain.  All three are
set in the netoptions startup script, which we would love to run for VNETs
as well [1].

While virtualising the log_in_vain sysctls seems pointles at first for as
long as the kernel message buffer is not virtualised, it at least allows
an administrator to debug the base system or an individual jail if needed
without turning the logging on for all jails running on a system.

PR:		243193 [1]
MFC after:	2 weeks
2020-01-08 23:30:26 +00:00
Randall Stewart
4ad2473790 This catches rack up in the recent changes to ECN and
also commonizes the functions that both the freebsd and
rack stack uses.

Sponsored by:Netflix Inc
Differential Revision:	https://reviews.freebsd.org/D23052
2020-01-06 15:29:14 +00:00
Randall Stewart
a9a08eced6 This change adds a small feature to the tcp logging code. Basically
a connection can now have a separate tag added to the id.

Obtained from:	Lawrence Stewart
Sponsored by:	Netflix Inc
Differential Revision:	https://reviews.freebsd.org/D22866
2020-01-06 12:48:06 +00:00
Randall Stewart
1cf55767b8 This commit is a bit of a re-arrange of deck chairs. It
gets both rack and bbr ready for the completion of the STATs
framework in FreeBSD. For now if you don't have both NF_stats and
stats on it disables them. As soon as the rest of the stats framework
lands we can remove that restriction and then just uses stats when
defined.

Sponsored by:	Netflix Inc.
Differential Revision:	https://reviews.freebsd.org/D22479
2019-12-17 16:08:07 +00:00
Edward Tomasz Napierala
adc56f5a38 Make use of the stats(3) framework in the TCP stack.
This makes it possible to retrieve per-connection statistical
information such as the receive window size, RTT, or goodput,
using a newly added TCP_STATS getsockopt(3) option, and extract
them using the stats_voistat_fetch(3) API.

See the net/tcprtt port for an example consumer of this API.

Compared to the existing TCP_INFO system, the main differences
are that this mechanism is easy to extend without breaking ABI,
and provides statistical information instead of raw "snapshots"
of values at a given point in time.  stats(3) is more generic
and can be used in both userland and the kernel.

Reviewed by:	thj
Tested by:	thj
Obtained from:	Netflix
Relnotes:	yes
Sponsored by:	Klara Inc, Netflix
Differential Revision:	https://reviews.freebsd.org/D20655
2019-12-02 20:58:04 +00:00
Michael Tuexen
3cf38784e2 Move all ECN related flags from the flags to the flags2 field.
This allows adding more ECN related flags in the future.
No functional change intended.

Submitted by:		Richard Scheffenegger
Reviewed by:		rrs@, tuexen@
Differential Revision:	https://reviews.freebsd.org/D22497
2019-12-01 21:01:33 +00:00
Michael Tuexen
77aabfd94f Make the TF_* flags easier readable by humans by adding leading zeroes
to make them aligned.

Submitted by:		Richard Scheffenegger
Reviewed by:		rgrimes@, rrs@, tuexen@
Differential Revision:	https://reviews.freebsd.org/D22428
2019-12-01 20:45:48 +00:00
Michael Tuexen
b72e56e758 This is an initial step in implementing the new congestion window
validation as specified in RFC 7661.

Submitted by:		Richard Scheffenegger
Reviewed by:		rrs@, tuexen@
Differential Revision:	https://reviews.freebsd.org/D21798
2019-12-01 20:35:41 +00:00
Randall Stewart
af9b9e0d9f This adds in the missing counter initialization which
I had forgotten to bring over.. opps.

Differential Revision: https://reviews.freebsd.org/D21127
2019-09-06 18:29:48 +00:00
Michael Tuexen
fe5dee73f7 This patch improves the DSACK handling to conform with RFC 2883.
The lowest SACK block is used when multiple Blocks would be elegible as
DSACK blocks ACK blocks get reordered - while maintaining the ordering of
SACK blocks not relevant in the DSACK context is maintained.

Reviewed by:		rrs@, tuexen@
Obtained from:		Richard Scheffenegger
MFC after:		1 week
Differential Revision:	https://reviews.freebsd.org/D21038
2019-09-02 19:04:02 +00:00
John Baldwin
b2e60773c6 Add kernel-side support for in-kernel TLS.
KTLS adds support for in-kernel framing and encryption of Transport
Layer Security (1.0-1.2) data on TCP sockets.  KTLS only supports
offload of TLS for transmitted data.  Key negotation must still be
performed in userland.  Once completed, transmit session keys for a
connection are provided to the kernel via a new TCP_TXTLS_ENABLE
socket option.  All subsequent data transmitted on the socket is
placed into TLS frames and encrypted using the supplied keys.

Any data written to a KTLS-enabled socket via write(2), aio_write(2),
or sendfile(2) is assumed to be application data and is encoded in TLS
frames with an application data type.  Individual records can be sent
with a custom type (e.g. handshake messages) via sendmsg(2) with a new
control message (TLS_SET_RECORD_TYPE) specifying the record type.

At present, rekeying is not supported though the in-kernel framework
should support rekeying.

KTLS makes use of the recently added unmapped mbufs to store TLS
frames in the socket buffer.  Each TLS frame is described by a single
ext_pgs mbuf.  The ext_pgs structure contains the header of the TLS
record (and trailer for encrypted records) as well as references to
the associated TLS session.

KTLS supports two primary methods of encrypting TLS frames: software
TLS and ifnet TLS.

Software TLS marks mbufs holding socket data as not ready via
M_NOTREADY similar to sendfile(2) when TLS framing information is
added to an unmapped mbuf in ktls_frame().  ktls_enqueue() is then
called to schedule TLS frames for encryption.  In the case of
sendfile_iodone() calls ktls_enqueue() instead of pru_ready() leaving
the mbufs marked M_NOTREADY until encryption is completed.  For other
writes (vn_sendfile when pages are available, write(2), etc.), the
PRUS_NOTREADY is set when invoking pru_send() along with invoking
ktls_enqueue().

A pool of worker threads (the "KTLS" kernel process) encrypts TLS
frames queued via ktls_enqueue().  Each TLS frame is temporarily
mapped using the direct map and passed to a software encryption
backend to perform the actual encryption.

(Note: The use of PHYS_TO_DMAP could be replaced with sf_bufs if
someone wished to make this work on architectures without a direct
map.)

KTLS supports pluggable software encryption backends.  Internally,
Netflix uses proprietary pure-software backends.  This commit includes
a simple backend in a new ktls_ocf.ko module that uses the kernel's
OpenCrypto framework to provide AES-GCM encryption of TLS frames.  As
a result, software TLS is now a bit of a misnomer as it can make use
of hardware crypto accelerators.

Once software encryption has finished, the TLS frame mbufs are marked
ready via pru_ready().  At this point, the encrypted data appears as
regular payload to the TCP stack stored in unmapped mbufs.

ifnet TLS permits a NIC to offload the TLS encryption and TCP
segmentation.  In this mode, a new send tag type (IF_SND_TAG_TYPE_TLS)
is allocated on the interface a socket is routed over and associated
with a TLS session.  TLS records for a TLS session using ifnet TLS are
not marked M_NOTREADY but are passed down the stack unencrypted.  The
ip_output_send() and ip6_output_send() helper functions that apply
send tags to outbound IP packets verify that the send tag of the TLS
record matches the outbound interface.  If so, the packet is tagged
with the TLS send tag and sent to the interface.  The NIC device
driver must recognize packets with the TLS send tag and schedule them
for TLS encryption and TCP segmentation.  If the the outbound
interface does not match the interface in the TLS send tag, the packet
is dropped.  In addition, a task is scheduled to refresh the TLS send
tag for the TLS session.  If a new TLS send tag cannot be allocated,
the connection is dropped.  If a new TLS send tag is allocated,
however, subsequent packets will be tagged with the correct TLS send
tag.  (This latter case has been tested by configuring both ports of a
Chelsio T6 in a lagg and failing over from one port to another.  As
the connections migrated to the new port, new TLS send tags were
allocated for the new port and connections resumed without being
dropped.)

ifnet TLS can be enabled and disabled on supported network interfaces
via new '[-]txtls[46]' options to ifconfig(8).  ifnet TLS is supported
across both vlan devices and lagg interfaces using failover, lacp with
flowid enabled, or lacp with flowid enabled.

Applications may request the current KTLS mode of a connection via a
new TCP_TXTLS_MODE socket option.  They can also use this socket
option to toggle between software and ifnet TLS modes.

In addition, a testing tool is available in tools/tools/switch_tls.
This is modeled on tcpdrop and uses similar syntax.  However, instead
of dropping connections, -s is used to force KTLS connections to
switch to software TLS and -i is used to switch to ifnet TLS.

Various sysctls and counters are available under the kern.ipc.tls
sysctl node.  The kern.ipc.tls.enable node must be set to true to
enable KTLS (it is off by default).  The use of unmapped mbufs must
also be enabled via kern.ipc.mb_use_ext_pgs to enable KTLS.

KTLS is enabled via the KERN_TLS kernel option.

This patch is the culmination of years of work by several folks
including Scott Long and Randall Stewart for the original design and
implementation; Drew Gallatin for several optimizations including the
use of ext_pgs mbufs, the M_NOTREADY mechanism for TLS records
awaiting software encryption, and pluggable software crypto backends;
and John Baldwin for modifications to support hardware TLS offload.

Reviewed by:	gallatin, hselasky, rrs
Obtained from:	Netflix
Sponsored by:	Netflix, Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D21277
2019-08-27 00:01:56 +00:00
Michael Tuexen
d21036e033 Add a sysctl variable ts_offset_per_conn to change the computation
of the TCP TS offset from taking the IP addresses and the TCP port
numbers into account to a version just taking only the IP addresses
into account. This works around broken middleboxes or endpoints.
The default is to keep the behaviour, which is also the behaviour
recommended in RFC 7323.

Reported by:		devgs@ukr.net
Reviewed by:		rrs@
MFC after:		2 weeks
Sponsored by:		Netflix, Inc.
Differential Revision:	https://reviews.freebsd.org/D20980
2019-07-23 21:28:20 +00:00
Randall Stewart
e5926fd368 This is the second in a number of patches needed to
get BBRv1 into the tree. This fixes the DSACK bug but
is also needed by BBR. We have yet to go two more
one will be for the pacing code (tcp_ratelimit.c) and
the second will be for the new updated LRO code that
allows a transport to know the arrival times of packets
and (tcp_lro.c). After that we should finally be able
to get BBRv1 into head.

Sponsored by:	Netflix Inc
Differential Revision:	https://reviews.freebsd.org/D20908
2019-07-14 16:05:47 +00:00
Randall Stewart
3b0b41e613 This commit updates rack to what is basically being used at NF as
well as sets in some of the groundwork for committing BBR. The
hpts system is updated as well as some other needed utilities
for the entrance of BBR. This is actually part 1 of 3 more
needed commits which will finally complete with BBRv1 being
added as a new tcp stack.

Sponsored by:	Netflix Inc.
Differential Revision:	https://reviews.freebsd.org/D20834
2019-07-10 20:40:39 +00:00
Navdeep Parhar
7893235ff0 tcp_autorcvbuf_inc was removed in r344433.
Discussed with:	tuexen@
Sponsored by:	Chelsio Communications
2019-03-29 21:39:47 +00:00
Michael Tuexen
7dc90a1de0 Fix a bug in the restart window computation of TCP New Reno
When implementing support for IW10, an update in the computation
of the restart window used after an idle phase was missed. To
minimize code duplication, implement the logic in tcp_compute_initwnd()
and call it. This fixes a bug in NewReno, which was not aware of
IW10.

Submitted by:		Richard Scheffenegger
Reviewed by:		tuexen@
MFC after:		1 week
Differential Revision:	https://reviews.freebsd.org/D18940
2019-01-25 13:57:09 +00:00
Randall Stewart
c28440db29 This change represents a substantial restructure of the way we
reassembly inbound tcp segments. The old algorithm just blindly
dropped in segments without coalescing. This meant that every
segment could take up greater and greater room on the linked list
of segments. This of course is now subject to a tighter limit (100)
of segments which in a high BDP situation will cause us to be a
lot more in-efficent as we drop segments beyond 100 entries that
we receive. What this restructure does is cause the reassembly
buffer to coalesce segments putting an emphasis on the two
common cases (which avoid walking the list of segments) i.e.
where we add to the back of the queue of segments and where we
add to the front. We also have the reassembly buffer supporting
a couple of debug options (black box logging as well as counters
for code coverage). These are compiled out by default but can
be added by uncommenting the defines.

Sponsored by:	Netflix Inc.
Differential Revision:	https://reviews.freebsd.org/D16626
2018-08-20 12:43:18 +00:00
Michael Tuexen
8e02b4e00c Don't expose the uptime via the TCP timestamps.
The TCP client side or the TCP server side when not using SYN-cookies
used the uptime as the TCP timestamp value. This patch uses in all
cases an offset, which is the result of a keyed hash function taking
the source and destination addresses and port numbers into account.
The keyed hash function is the same a used for the initial TSN.

Reviewed by:		rrs@
MFC after:		1 month
Sponsored by:		Netflix, Inc.
Differential Revision:	https://reviews.freebsd.org/D16636
2018-08-19 14:56:10 +00:00
Brooks Davis
f38b68ae8a Make struct xinpcb and friends word-size independent.
Replace size_t members with ksize_t (uint64_t) and pointer members
(never used as pointers in userspace, but instead as unique
idenitifiers) with kvaddr_t (uint64_t). This makes the structs
identical between 32-bit and 64-bit ABIs.

On 64-bit bit systems, the ABI is maintained. On 32-bit systems,
this is an ABI breaking change. The ABI of most of these structs
was previously broken in r315662.  This also imposes a small API
change on userspace consumers who must handle kernel pointers
becoming virtual addresses.

PR:		228301 (exp-run by antoine)
Reviewed by:	jtl, kib, rwatson (various versions)
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D15386
2018-07-05 13:13:48 +00:00
Matt Macy
6573d7580b epoch(9): allow preemptible epochs to compose
- Add tracker argument to preemptible epochs
- Inline epoch read path in kernel and tied modules
- Change in_epoch to take an epoch as argument
- Simplify tfb_tcp_do_segment to not take a ti_locked argument,
  there's no longer any benefit to dropping the pcbinfo lock
  and trying to do so just adds an error prone branchfest to
  these functions
- Remove cases of same function recursion on the epoch as
  recursing is no longer free.
- Remove the the TAILQ_ENTRY and epoch_section from struct
  thread as the tracker field is now stack or heap allocated
  as appropriate.

Tested by: pho and Limelight Networks
Reviewed by: kbowling at llnw dot com
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16066
2018-07-04 02:47:16 +00:00
Randall Stewart
89e560f441 This commit brings in a new refactored TCP stack called Rack.
Rack includes the following features:
 - A different SACK processing scheme (the old sack structures are not used).
 - RACK (Recent acknowledgment) where counting dup-acks is no longer done
        instead time is used to knwo when to retransmit. (see the I-D)
 - TLP (Tail Loss Probe) where we will probe for tail-losses to attempt
        to try not to take a retransmit time-out. (see the I-D)
 - Burst mitigation using TCPHTPS
 - PRR (partial rate reduction) see the RFC.

Once built into your kernel, you can select this stack by either
socket option with the name of the stack is "rack" or by setting
the global sysctl so the default is rack.

Note that any connection that does not support SACK will be kicked
back to the "default" base  FreeBSD stack (currently known as "default").

To build this into your kernel you will need to enable in your
kernel:
   makeoptions WITH_EXTRA_TCP_STACKS=1
   options TCPHPTS

Sponsored by:	Netflix Inc.
Differential Revision:		https://reviews.freebsd.org/D15525
2018-06-07 18:18:13 +00:00
Randall Stewart
803a230592 This change re-arranges the fields within the tcp-pcb so that
they are more in order of cache line use as one passes
through the tcp_input/output paths (non-errors most likely path). This
helps speed up cache line optimization so that the tcp stack runs
a bit more efficently.

Sponsored by:	Netflix Inc.
Differential Revision:	https://reviews.freebsd.org/D15136
2018-04-26 21:41:16 +00:00