and broken for a number of years. freebsd-update now provides a reasonable
way to handle upgrades, so keeping this functionality in sysinstall only
serves to mislead users.
Approved by: cperciva (mentor)
FreeBSD docset during 'make release' this will speed up release
builds;
- sysinstall(8) has also been updated to use these packages with a new
menu allowing people to choose what localized doc to install;
- mention in UPDATING that docs from the FreeBSD Documentation project
are now installed in /usr/local/share/doc/freebsd instead of
/usr/share/doc.
Approved by: re (kensmith)
This covers the common case of unsliced USB drives, and makes it possible to
select them as installation source media.
PR: 61152, 115197, 135016
Submitted by: randi
MFC after: 1 month
the user selected and then recursively installing their dependencies, finally
installing the ones the user selected after the recursion unwinds. Since
users often select "high-level" packages that are on a higher numbered
disc for the multi-volume release CDROMS this resulted in excessive disc
swapping while installing things like kde, gnome, etc.
Cut down on disc swapping by iterating through the disc volumes one at a
time if we notice the package set is on multiple volumes. If a package
is on a higher volume don't install it yet, but still "process it" so we
get its dependencies installed. Because of the way the package sets for
releases get assembled we're guaranteed dependencies will be on the same
volume or lower.
Reviewed by: jhb
MFC after: 1 week
tape have been broken for quite a while, and I'll be removing the rest
of sysinstall's knowledge of tapes shortly. I'm doing this piece now
because I want to switch from gnu's cpio to bsdcpio being integrated
into the installation environment and bsdcpio doesn't seem to handle
block sizes at all.
probably the right thing to do a while ago but xorg has progressed
to the point that for novice users (who are the ones expected to think
installing X11 during an install...) it's best to just install the
whole x11/xorg metaport for them. This removes the X11 sub-menus
and sets it up so you just select whether or not you want X11. While
here garbage collect an X11 configuration menu I missed removing when
I removed support for attempting xorg configuration from inside sysinstall
a while ago.
Discussed with: rwatson, kris
No objection from: re
Release build tested by: rwatson
MFC after: 1 week
default distribution (user) will be installed, however, no kernel
will be installed. Fix this by installing a sensible default kernel,
SMP/GENERIC, depending on WITH_SMP and number of CPUS found.
Reviewed by: jhb
see which release you are installing (really which FreeBSD version the
installer is running, but that shouldn't matter in all normal cases).
PR: bin/100309
Submitted by: Joao Barros <joao.barros@gmail.com> (original version)
Idea from: FreeBSD ideas page
MFC after: 1 week
at runtime and to support distributing additional kernels:
o remove kernel from the base tarball
o add new kernel tarballs
o build + package both SMP and GENERIC kernels when an <arch>/conf/SMP
config file is present
o add sysinstall support for multiple kernels
o update sysinstall to probe for the number of cpus on a system
and auto-select smp/up kernel accordingly
o add a post-kernels install hook to fixup /boot/kernel
o add -ldevinfo to boot crunch for sysinstall's cpu probing logic
Notes:
1. On HEAD this code is not currently used because GENERIC kernels
include SMP. This work is mainly intended for RELENG_6 where the
GENERIC kernel is UP. If HEAD changes to match then just enable
WITH_SMP in sysinstall/Makefile.
2. The cpu probing support is done with acpi and MPTable; this means
some systems will require work for auto-detection to work.
3. The handling of /boot/kernel may need to be revisited; for now
we rename one kernel at the last moment (SMP if installed, otherwise
GENERIC). There are other, possibly better, approaches.
Lots of help from ru, emaste, scottl, and jhb.
this now compiles on i386 with WARNS?= 3. Most of the fixes included
adding missing 'static' keywords to internal functions, using fully-defined
terminators in statically defined arrays of structs, and various
signed vs unsigned mismatches. Also G/C'd unused configSecurity()
function.
by syscons.
- If we are running as init, popup the country menu before the main menu.
If a non-default country is chosen, then a second menu is brought up
to let the user choose a keymap. By default the default keymap for
the country that was selected is highlighted. If the user chooses the
default country, then the default keymap is just assumed and the user
is not presented with the keymap menu. Currently the default country
is set to "United States" except for PC98 which assumes "Japan".
PR: bin/93853
Submitted by: Seth Kingsley sethk at magnesium dot net
MFC after: 3 days
For example, you can dynamically generate and load configuration file
depending on the hardware configuration with the following template:
mediaSetCDROM
mediaOpen
command='/dist/rescue/sh /dist/scripts/install.sh'
system
mediaClose
configFile=/tmp/generated.cfg
loadConfig
Now we have full access to files on the media before installation begins.
with EBUSY and a cdrom is not mounted at /cdrom, sysinstall fails to
treat it as an error and thinks that the disk mounted ok. However, it
doesn't find a cdrom.inf file so it complains. Later when it tries to
unmount the disk due to a mediaClose() umount(2) returns an error, and it
never clears its internal mounted flag. The fix here is to properly
handle EBUSY as an error if there isn't a CD already mounted at /cdrom.
- Add a new CDROMInitQuiet variable that can be used to shut up the dialog
box about the mount(2) system call failing when trying to mount a CD-ROM.
This is used by the feature described below.
- When using a fixit CD, first try to see if we can mount the disc in the
drive now and use it as a fixit CD. If not, then prompt the user to
insert the disc and try again. If we do succeed on the first "silent"
probe then we don't ask the user to eject the disk after leaving fixit
mode.
- Add a simple file existence test to make sure that the disc that we mount
really is a livefs disc.
- Explicitly switch back to ttyv0 when using the standard console after
the fixit shell dies. Previously this behavior worked accidentally
because all the fixit modes popped up a dialog box which contained a
hidden switch to ttyv0.
MFC after: 1 day
concensus seems to be that is best left for doing post-install.
Discussed on: freebsd-current@
Tested with: make release
Approved by: re@
MFC after: 3 days
global variables. On ia64, save a pointer to the efi chunk as well.
o At the same time, change checkLabels() to define these globals instead
of having the caller of checkLabels() pass addresses to variables for
these. Change the two callers correspondingly.
o Spent a bit more time adjusting try_auto_label() to prepate for having
the EFI partition created on ia64.
o Remove efi_mountpoint(). The EFI chunk is now available without having
to iterate over the disks and chunks to find it every time we need it.
o On ia64, now that the root chunk is globally available, set the
vfs.root.mountfrom tunable in loader.conf. This avoids that one cannot
boot into FreeBSD after an install. The kernel cannot find the root
device without a little help...
of releases. The -DNOCRYPT build option still exists for anyone who
really wants to build non-cryptographic binaries, but the "crypto"
release distribution is now part of "base", and anyone installing from a
release will get cryptographic binaries.
Approved by: re (scottl), markm
Discussed on: freebsd-current, in late April 2004
that actually need it. This makes it easier for a platform porter to
find the files that may need tweaking to support whatever MD specific
partitioning is needed. It also helps to prevent that the libdisk API
gets exposed and/or used where it's not needed.
permitting the administrator to select a securelevel top operate
at. Include a helpfile summarizing some of the information from
init(8). This allows for explicit configuration of securelevels,
which was previously implicit in Security Profile selection.
Currently, there are no checkboxes for the active securelevel,
because sysinstall's facilities for deriving "current settings"
from rc.conf may use only one variable, not two, and I opted for
the simplest approach at this point.
Approved by: re (scottl)
selection is used to drive two configuration parameters:
(1) Default enable/disable for sshd
(2) Default enable/disable for securelevels
Replace this with an explicit choice to enable/disable sshd. A
follow-up commit will add a configuration option to the Security
post-install configuration menu to set the securelevel in rc.conf
explicitly. This should reduce the level of foot-shooting associated
with accidental enabling of securelevels, make the nature and
implications of the securelevel configuration options more explicit,
as well as make the choice to enable/disable sshd more explicit.
Approved by: re (scottl)
to better deal with the fact that we need an EFI partition and
that we need to have a mountpoint for it.
o When creating a new partition, add EFI to the list of types
the user can select from. This makes it easy to create an EFI.
o Do not include wizard.c on ia64.
o The user cannot create a partition on ia64 that's a multiple of
the cylinder size. We don't have a notion of cyclinders.
This option adds Postfix and Exim to the list, however, qmail is not added
due to license restrictions.
Collaborated with: Simon L. Nielsen <simon@nitro.dk>
Reviewed by: jhb, re@, -audit.
