try and recurse if the lkm dir exists for some reason but there isn't any
Makefile there. (eg: stray files prevented cvs update -P from removing the
empty dirs)
some tools requiring header files, such as errno.h, that are softlinks.
The mini installation of include files in Makefile.inc1 wasn't doing
the job, so it has been ripped out and replaced with a true make of the
/usr/src/include/ directory (make all and make beforeinstall). I think
the original idea was to save time by not installing unnecessary header
files, but it doesn't really save all that much time.
Also, I have moved a NOCLEAN conditional to cover rebuilding the object
tree 'Rebuilding the ${OBJFORMAT} obj tree' section. This may or may not
be correct but it appears to function properly. If it is not correct we
need to find another way to avoid scanning every single file in the
entire source hierarchy for make restarts.
Build the ordered list of libraries in a variable "_libs" before
building any of them. This eliminates a little bit of duplicated
code. More importantly, it makes it easier to include or exclude
libraries with .if constructs, because the list can be built in
multiple steps using "+=".
`make world' case, and only made a difference for the evil NOTOOLS case
of `make world' since games tools are installed in ${TOOLROOT}/usr/bin
if they are built, but the PR was for normal builds. This is fixed
in rev.1.14 of src/games/fortune/datfiles/Makefile.
PR: 7936
- in the elf case, csu must be built and installed before any shared
libraries. It wasn't, but we usually used a stale version that
happened to work. E.g., in the !NOTOOLS case we used the version
built and installed by the bootstrap-libraries target. Only cross
building was completely broken.
- the shared libmd must be built and installed before any shared
libraries that link to it. It wasn't, but we sometimes used a stale
version that happened to work, as above. For elf, this caused
bogus linkage of the target shared libatm and libopie with the host
static libmd. It isn't clear what this actually breaks, except for
cross compiling. For aout, the shared libmd is not built at all, so
all shared libraries linked to libmd may be broken. The linker
reports them by spewing RRS warnings.
Note that building src/lib early and building subdirs of src/lib in
the correct order in src/lib/Makefile doesn't help, since the subdirs
are all built before any are installed.
Fixed bitrot in the comments about the ordering requirements.
Remove /sys/boot from legacy-build.
Add btxld to build-tools.
In src/sys/Makefile:
Add /sys/boot for i386 ELF.
I'm still not sure why the new boot code was being built along with the
legacy stuff, which meant a completely wrong default environment for it.
This may well still be the wrong way to go about this, but it can't work
all that much worse than it has been.
Prompted by: bde
Also. Don't build & install legacy lkm's when NOLKM has been set.
Otherwise it gets built in the src tree rather than obj, because the
previous 'make obj' at the start of legacy-build does respect NOLKM.
was constructed early enough, so perl was linking against the static lib.
This was breaking perl under ELF, as perl could not load shared objects
(in fact would dump core).
Install the rest of the legacy libraries (like libgcc.a, libl.a).
Add games to the user's path to avoid the temptation for people to
hack paths to unsuitable tools.
Make output of make world more readable for grep. Now a
grep '>>>' world.log
shows you the single stages through which the bootstrap
process went as discussed on -current. Could be used to
debug the bootstrap mechanism in case of trouble more
easily. Would be fine if any further @echo "..." messages
containing a description, what's going on, could use the
new format: @echo ">>> ..."
===================================
HARP | Host ATM Research Platform
===================================
HARP 3
What is this stuff?
-------------------
The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center,
Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed
the Host ATM Research Platform (HARP) software, which allows IP hosts to
communicate over ATM networks using standard protocols. It is intended to
be a high-quality platform for IP/ATM research.
HARP provides a way for IP hosts to connect to ATM networks. It supports
standard methods of communication using IP over ATM. A host's standard IP
software sends and receives datagrams via a HARP ATM interface. HARP provides
functionality similar to (and typically replaces) vendor-provided ATM device
driver software.
HARP includes full source code, making it possible for researchers to
experiment with different approaches to running IP over ATM. HARP is
self-contained; it requires no other licenses or commercial software packages.
HARP implements support for the IETF Classical IP model for using IP over ATM
networks, including:
o IETF ATMARP address resolution client
o IETF ATMARP address resolution server
o IETF SCSP/ATMARP server
o UNI 3.1 and 3.0 signalling protocols
o Fore Systems's SPANS signalling protocol
What's supported
----------------
The following are supported by HARP 3:
o ATM Host Interfaces
- FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters
- FORE Systems, Inc. PCA-200E ATM PCI Adapters
- Efficient Networks, Inc. ENI-155p ATM PCI Adapters
o ATM Signalling Protocols
- The ATM Forum UNI 3.1 signalling protocol
- The ATM Forum UNI 3.0 signalling protocol
- The ATM Forum ILMI address registration
- FORE Systems's proprietary SPANS signalling protocol
- Permanent Virtual Channels (PVCs)
o IETF "Classical IP and ARP over ATM" model
- RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
- RFC 1577, "Classical IP and ARP over ATM"
- RFC 1626, "Default IP MTU for use over ATM AAL5"
- RFC 1755, "ATM Signaling Support for IP over ATM"
- RFC 2225, "Classical IP and ARP over ATM"
- RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
- Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
"A Distributed ATMARP Service Using SCSP"
o ATM Sockets interface
- The file atm-sockets.txt contains further information
What's not supported
--------------------
The following major features of the above list are not currently supported:
o UNI point-to-multipoint support
o Driver support for Traffic Control/Quality of Service
o SPANS multicast and MPP support
o SPANS signalling using Efficient adapters
This software was developed under the sponsorship of the Defense Advanced
Research Projects Agency (DARPA).
Reviewed (lightly) by: phk
Submitted by: Network Computing Services, Inc.
a port so there is nothing to be done on that side now.
Approved by: jkh
===
To: "Jordan K. Hubbard" <jkh@time.cdrom.com>
cc: Andreas Klemm <andreas@klemm.gtn.com>, current@freebsd.org
Subject: Re: Make this a relese coordinator decision (was Re: ports-current/packages-current discontinued)
From: David Greenman <dg@root.com>
Date: Sun, 03 Aug 1997 20:23:31 -0700
>decision is, I'll respect it.
Another chance to architect people's principles...I can hardly wait. Seems
quite appropriate for a Sunday - I just need to get one of those collection
plates (and money envelopes) so I can profit, too. :-)
Tcl stays in /usr/src for now, but it needs to be kept up to date; same
for perl. If Jordan doesn't have "setup" (written in tcl) ready for 3.0,
then tcl will be yanked prior to the 3.0 release (and made into a port).
As for the ports tree only supporting the last FreeBSD release, this seems
sensible to me. The "ports" have always been a moving target between releases
and the problem is only going to get worse when we expand to supporting other
processor architectures. In any case, Satoshi is and always has been in charge
of the ports tree and whatever he wants to do with it (within reason :-)) is
his decision.
Does this cover the issue completely? I admit to deleting messages in this
thread with unusual fervor (people have FAR too much time on their hands!).
There's a fair bit of reasoning behind the above, but since everyone is sick
of arguing about this, I'll spare you the analysis.
-DG
David Greenman
Core-team/Principal Architect, The FreeBSD Project
