global time of day. This costs us nothing, but is a bit of a hack
to work around a process blocking and not having the time updated
by an ITIMER_PROF signal.
PR: 23679
present, this is limited to turning on the packet option if any of
disk slices begin above cylinder 1023. The effect of this change
should therefore be to automatically enable LBA support, as needed,
when installing FreeBSD.
Something-of-the-kind-requested-by: peter
no longer contains kernel specific data structures, but rather
only scalar values and structures that are already part of the
kernel/user interface, specifically rusage and rtprio. It no
longer contains proc, session, pcred, ucred, procsig, vmspace,
pstats, mtx, sigiolst, klist, callout, pasleep, or mdproc. If
any of these changed in size, ps, w, fstat, gcore, systat, and
top would all stop working. The new structure has over 200 bytes
of unassigned space for future values to be added, yet is nearly
100 bytes smaller per entry than the structure that it replaced.
identification and descriptions of most capabilities, current inheritence
rules, etc. More to follow.
Reviewed by: sheldonh
Obtained from: TrustedBSD Project
member f_devdata to be a pointer to a socket number. When currdev
is "pxe", that assumption is correct. When currdev is "disk*", that
assumption is incorrect.
Submitted by: Jim Browne <jbrowne@jbrowne.com>
and had libfetch selecting passive mode even when FTP_PASSIVE_MODE was not
set at all, which is really quite surprising unless you know about it. So
change it to the agreed default behaviour of selecting passive mode if
FTP_PASSIVE_MODE is set, but not "no".
telldir positions. This will allow (future) locking on a
per-DIR basis (for MT-safety). For now, this change does
the following:
o Remove the hash table from telldir.c. Recode to use queue
macros.
o Remove 'const' from 'telldir(const DIR *)'.
o Remove 'register' variables as suggested in a recent
thread.
No response from: -current
- iruserok_sa() and __ivaliduser_af() were re-organized to use
__ivaliduser_sa()
- __icheckhost() was re-written to use getaddrinfo() instead of
getipnodebyname()
- better handling of multiple destination addresses in rcmd()
These changes were basically taken from KAME and changed to fit our
rcmd.c.
Obtained from: KAME
a NULL argument. Some programs change the contents of the argv
array, typically to remove some special arguments. They shorten
argv by storing a NULL where an argument pointer used to be. Such
programs core dumped if they called setproctitle(), because it
would try to apply strlen() to a NULL pointer.
instead of immediately after the fclose. The previous logic did work
on freebsd, but is somewhat risky practice (and causes trouble when
porting to other OS's).
PR: bin/22965
Reviewed by: Garrett Wollman
files. Mostly -I${.CURDIR} was needed -- especially for YACC generated
files as the new cpp does not look in the ultimate source file
(ie, the .y file)'s directory as told by the "#line" directive. Some were
misspellings of "-I${.CURDIR}" as "-I.".
stderr in case of warnings and errors.
Rename malloc_options to have a leading underscore, I belive I have been
told that is more correct namespace wise.
back to the original environ unconditionally. The setting of the
variable to save the previous environ is conditional; it happens when
ENV.e_committed is set. Therefore, don't try to swap the env back
unless the previous env has been initialized.
PR: bin/22670
Submitted by: Takanori Saneto <sanewo@ba2.so-net.ne.jp>
libcompat" in favour of a .Sh LIBRARY section using the .Lb macro. Also add
.Bf -symbolic around the text saying "this is obsolete" in re_comp.3.
PR: 22675
Submitted by: Mike Meyer <mwm@mired.org>
Reviewed by: sheldonh
executed at least once, fixing pthread_mutex_lock() for recursive
mutex lock attempts.
Correctly set a threads signal mask while it is executing a signal
handler. The mask should be the union of its current mask, the
signal being handled, and the mask from the signal action.
Reported by: Dan Nelson <dnelson@emsphone.com>
MFC Candidate
was not getting properly initialized in pthread_cond_signal()
and pthread_cond_broadcast(). Reportedly, this can cause
an application to die.
MFC candidate
Submitted by: ade
the kernel to (re)use the alternate signal stack. In this
case, we don't return normally from the signal handler,
so the kernel still thinks we are using the signal stack.
The fixes a nasty bug where the signal handler can start
fiddling with the stack of a thread while the handler is
actually running on the same stack.
MFC candidate
the encoding and using the character set [a-zA-Z0-9]. This gives a total
of 62^6 = 56800235584 possible temporary filenames for the usual default
invocation of 6 X's (compared to as few as 52 possibilities for the
previous algorithm where up to 5 characters were wasted by the PID).
Update some apparently bitrotten comments to reflect reality.
Audited by: eivind, freebsd-audit
Reviewed by: freebsd-current (a while ago)
Originally submitted by: Peter Jeremy <Peter.Jeremy@alcatel.com.au>
The test for failing the end guard was always triggering (and was reported as
such in compiler warnings). This is a temporary band-aid until I can work
out what's really going on.
Reviewed by: obrien
file descriptors needing to be polled (Doh!). Reported
by Dan Nelson <dnelson@emsphone.com>.
Don't install and start the scheduling timer until the
first thread is created. This prevents the overhead of
having a periodic scheduling signal in a single threaded
program. Reported by Dan Nelson <dnelson@emsphone.com>.
Allow builtin longjmps out of application installed
signal handlers without the need perform any post-handler
cleanup:
o Change signal handling to save the threads interrupted
context on the stack. The threads current context is
now always stored in the same place (in the pthread).
If and when a signal handler returns, the interrupted
context is copied back to the storage area in the pthread.
o Before calling invoking a signal handler for a thread,
back the thread out of any internal waiting queues
(mutex, CV, join, etc) to which it belongs.
Rework uthread_info.c a bit to make it easier to change
the format of a thread dump.
Use an alternal signal stack for the thread library's
signal handler. This allows us to fiddle with the main
threads stack without fear of it being in use.
Reviewed by: jasone
into an infinite loop when a timeout value is supplied
and the timeout expires.
Reported by: Dan Nelson <dnelson@emsphone.com>
Reviewed by: jasone, jlemon
that applications know how large of a buffer they must allocate before
calling property_find(). Also added a $FreeBSD$ tag while I'm here.
Approved by: jkh
in <sys/signal.h>.
This might be a shortterm fix until the manpage is updated towards
POSIX terminology. And maybe not...
PR: 21542
Submitted by: Ronald F. Guilmette <rfg@monkeys.com>
PPTP links are no longer dropped by simple (and inappropriate in this
case) "inactivity timeout" procedure, only when requested through the
control connection.
It is now possible to have multiple PPTP servers running behind NAT.
Just redirect the incoming TCP traffic to port 1723, everything else
is done transparently.
Problems were reported and the fix was tested by:
Michael Adler <Michael.Adler@compaq.com>,
David Andersen <dga@lcs.mit.edu>
when using the egcs and gcc-devel ports, along with GCC built from stock
public FSF sources. With out this change, FreeBSD will be removed from
the list of systems GCC 3.0 must be evaluated on before release. With
the effort some of us put into getting FreeBSD on this list, we should
not turn this effort into a waste, else we might not be worth fighting
for in the future. (note that Alpha and IA-64 versions of crt{i,n}.S
are needed)
* Switch from our own crt{begin,in} to those created from GCC's crtstuff.c.
This will allow us to switch to DWARF2 exceptions in the future, along with
staying in sync with any future GCC requirements.
* Break out our ELF branding bits into a seperate file. Currently this
is now included by our crt1.c files (since this functionality was part of
our native crtbegin.c). Later crtbrand.o will be merged in the creation
of crti.o.
getting libutil/libcrypt to work properly. I've determined that GCC
thinks it can inline all functions, including weak-symboled ones, if
it feels like it.
Create a new stub.c and move any stubs there to prevent inlining.
Thanks to jdp and William S. Duncanson for helping me finally find the
problem.
by sigwait(). This prevents a signal from being sent to the process
when there are no application installed signal handlers.
Correct a typo in sigwait (foo -> foo[i]).
bind distribution, but until now was not being built as a separate
entity. For documentation, see these man pages:
assertions(3), eventlib(3), heap(3), logging(3), memcluster(3), tree(3).
Reviewed by: jdp
adding a signal frame to a thread, be sure to label the context
correctly so we don't restore an uninitialized process mask.
Reported by: kimc@W8HD.ORG and Andrey Rouskol <anry@sovintel.ru>
- ftpTimeout was not honored when reading actual data, as opposed to
talking protocol
- connection caching was broken because _ftp_cached_connect() would see
the result of the transfer instead of the result of the NOOP.
- if the RETR succeeded, but an error occurred later (as can happen
when talking to a proxy), the error would not be detected.
There still remains to register an atexit(3) callback to close the cached
connection gracefully instead of just dropping it on the floor.
K&R -> ANSI
Bugfix: 'Keep the bit position even when the report descriptor says POP.'
Add hid_use_report_desc, hid_parse_usage_page, hid_parse_usage_in_page.
Changed iface for hid_report_size.
Add references to the newly added hardware debug register
support functions i386_clr_watch(3) and i386_set_watch(3).
Reviewed by: Sean Eric Fagan <sef@kithrup.com>
and no other response to the review request.
thread switches should be on par with that under scheduler
activations.
o Timing is achieved through the use of a fixed interval
timer (ITIMER_PROF) to count scheduling ticks instead
of retrieving the time-of-day upon every thread switch
and calculating elapsed real time.
o Polling for I/O readiness is performed once for each
scheduling tick instead of every thread switch.
o The non-signal saving/restoring versions of setjmp/longjmp
are used to save and restore thread contexts. This may
allow the removal of _THREAD_SAFE macros from setjmp()
and longjmp() - needs more investigation.
Change signal handling so that signals are handled in the
context of the thread that is receiving the signal. When
signals are dispatched to a thread, a special signal handling
frame is created on top of the target threads stack. The
frame contains the threads saved state information and a new
context in which the thread can run. The applications signal
handler is invoked through a wrapper routine that knows how
to restore the threads saved state and unwind to previous
frames.
Fix interruption of threads due to signals. Some states
were being improperly interrupted while other states were
not being interrupted. This should fix several PRs.
Signal handlers, which are invoked as a result of a process
signal (not by pthread_kill()), are now called with the
code (or siginfo_t if SA_SIGINFO was set in sa_flags) and
sigcontext_t as received from the process signal handler.
Modify the search for a thread to which a signal is delivered.
The search algorithm is now:
o First thread found in sigwait() with signal in wait mask.
o First thread found sigsuspend()'d on the signal.
o Current thread if signal is unmasked.
o First thread found with signal unmasked.
Collapse machine dependent support into macros defined in
pthread_private.h. These should probably eventually be moved
into separate MD files.
Change the range of settable priorities to be compliant with
POSIX (0-31). The threads library uses higher priorities
internally for real-time threads (not yet implemented) and
threads executing signal handlers. Real-time threads and
threads running signal handlers add 64 and 32, respectively,
to a threads base priority.
Some other small changes and cleanups.
PR: 17757 18559 21943
Reviewed by: jasone
u_int64_t flag field, bounding the number of capabilities at 64,
but substantially cleaning up capability logic (there are currently
43 defined capabilities).
o Heads up to anyone actually using capabilities: the constant
assignments for various capabilities have been redone, so any
persistent binary capability stores (i.e., '$posix1e.cap' EA
backing files) must be recreated. If you have one of these,
you'll know about it, so if you have no idea what this means,
don't worry.
o Update libposix1e to reflect this new definition, fixing the
exposed functions that directly manipulate the flags fields.
Obtained from: TrustedBSD Project
compatible with the old version but includes new functionality and bug fixes.
Since it is not part of the NO_SENDMAIL make.conf option, libsmdb and
libsmutil should always be built for vacation's sake.
PR: 15227
Replace all in-tree uses with necessary subset of <sys/{fb,kb,cons}io.h>.
This is also the appropriate fix for exo-tree sources.
Put warnings in <machine/console.h> to discourage use.
November 15th 2000 the warnings will be converted to errors.
January 15th 2001 the <machine/console.h> files will be removed.
