Commit Graph

4024 Commits

Author SHA1 Message Date
Matthew N. Dodd
2825e76714 Add support for the Am79C978. (AMD PCHome/PCI Ethernet adapter)
See: http://www.amd.com/products/npd/overview/homenetworking/intro.html

PR: kern/12275
Submitted by: Robert Watson <robert@cyrus.watson.org>
1999-08-10 01:03:51 +00:00
Brian Somers
2567bca06a Add an example of an isdnd.rc that works with ppp. 1999-08-09 22:58:55 +00:00
Brian Somers
a10b3ee0d4 Add an example of an isdn profile. 1999-08-09 22:57:47 +00:00
Chris Costello
e861b0f57e Fix a few typos and misspellings, grabbed from PR#8472 1999-08-09 14:31:04 +00:00
Chris Costello
b6df42f810 Remove reference to nonexistant man page `da(9)' 1999-08-09 02:35:55 +00:00
Greg Lehey
b13c5ac72b Update to reflect recent changes. 1999-08-07 09:27:25 +00:00
Hellmuth Michaelis
0df6adec74 updating isdn4bsd to beta version 0.83 1999-08-06 14:05:10 +00:00
Joseph Koshy
955f41c518 Remove empty "SEE ALSO" section.
PR:		docs/12990
Submitted by:	Chris Costello <chris@calldei.com>
1999-08-06 05:51:07 +00:00
Wolfram Schneider
aae8bc803d Typo
Submitted by:	 Christian Weisgerber <naddy@mips.rhein-neckar.de>
1999-08-03 08:15:02 +00:00
Satoshi Asami
8a0f4c9b7a Add ports-ftp. 1999-08-02 11:31:04 +00:00
Tim Vanderhoek
0983f2b022 English fixes: consistent spacing after periods, "userland", not "user land",
other typos, ~four grammar gnits, an ironic case of incorrect
               parallelization, bad capitalization, an incorrect use of the
               infamous slash ('/'), and an unclear sentence.
1999-08-02 04:00:33 +00:00
Tim Vanderhoek
4ac29fd62e Bruce noted that the use of err(), fixed to errx() in the last commit,
did not specify an exit code.  This implies the use of either a hand-
rolled err() (Bruce's suggestion) or a random error code (my suggestion),
both of which are against the style guidelines.  This commit specifies
the correct error code (implicitly).  This also changes the error message
to be a little more helpful.
1999-08-02 03:18:17 +00:00
Tim Vanderhoek
e902c1bb07 Add variable INSTALLFLAGS_EDIT used to remove arbitrary INSTALLFLAGS.
Specifically intended for removing -fschg ("INSTALLFLAGS_EDIT=:S/schg/uchg/")
this makes the NOFSCHG flag redundant.  NOFSCHG will still be honoured by
bsd.lib.mk but is valid for buildworld only.  NOFSCHG is still implemented in
the old way (ie. _not_ ".if NOFSCHG then { INSTALLFLAGS_EDIT+=:S/schg/,/ }"
to emphasize the fact that NOFSCHG is only supported in a limited
fashion and for buildworld.

The interface and implementation are such that future use of flags such
as sappnd can also be easily removed or altered (perhaps to uappnd).

This commit brought to you by the letters B, D, and E, and the numbers six,
one, thirteen, and three.
1999-07-31 20:27:33 +00:00
Tim Vanderhoek
b787fc933a Use errx() instead of err() in example code calling err() after strtol(). 1999-07-31 15:04:37 +00:00
Mike Pritchard
7ac35fc77b Remove troff formatting directive from the first line of the man page,
since it is no longer needed.

Pointed out by bde before I had a chance to fix it
1999-07-31 02:33:40 +00:00
Mike Pritchard
703b0715de Convert a table of function keys into mdoc format so that they
format properly.  Previously the table came out all garbled up.
1999-07-30 14:12:12 +00:00
Mike Pritchard
c809f5b9e0 Fix some typos. 1999-07-30 12:59:13 +00:00
Mike Pritchard
0ef6a34a34 Use the .At macro to reference versions of AT&T UNIX. 1999-07-30 12:52:21 +00:00
Matthew N. Dodd
15317dd875 Alter the behavior of sys/kern/subr_bus.c:device_print_child()
- device_print_child() either lets the BUS_PRINT_CHILD
	  method produce the entire device announcement message or
	  it prints "foo0: not found\n"

Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on
the previous behavior of device_print_child() (printing the
"foo0: <FooDevice 1.1>" bit of the announce message.)

Provide bus_print_child_header() and bus_print_child_footer()
to actually print the output for bus_generic_print_child().
These functions should be used whenever possible (unless you can
just use bus_generic_print_child())

The BUS_PRINT_CHILD method now returns int instead of void.

Modify everything else that defines or uses a BUS_PRINT_CHILD
method to comply with the above changes.

	- Devices are 'on' a bus, not 'at' it.
	- If a custom BUS_PRINT_CHILD method does the same thing
	  as bus_generic_print_child(), use bus_generic_print_child()
	- Use device_get_nameunit() instead of both
	  device_get_name() and device_get_unit()
	- All BUS_PRINT_CHILD methods return the number of
	  characters output.

Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
Nik Clayton
f3fd3a0091 Explicitly list the i/o addresses of the serial ports.
Prompted by docs/12343, in which people seemed to get a little confused.
The original text in the file said:

[...]
# By default we use COM1 as our serial console port *if* we're going to use
# a serial port as our console at all.  (0x3E8 = COM2)
#
#BOOT_COMCONSOLE_PORT= 0x3F8
[...]

From what I can make out, some people have assumed that means that if
they just uncomment the BOOT_COMCONSOLE_PORT then it will use COM2:
These same people then assume that "0x3F8" on that line is a typo for
"0x3E8".

What it actually means is that if you uncomment the line then the default
stays as "Ox3F8" (COM1:), and that you have to uncomment the line, *and*
change the value of the variable in order to use COM2:.

So I've made that a little bit clearer.  I've also listed the hex values
for COM1: thru COM4:, snarfed from sys/isa/isareg.h.

PR:             docs/12343
Submitted by:   Bill Grunfelder <wjgrun@dippy.cyberwar.com>
1999-07-28 20:28:54 +00:00
Brian Somers
4f65166ad5 Show how to use the new filter capabilities
Mostly submitted by:  Peter Jeremy <jeremyp@gsmx07.alcatel.com.au>
1999-07-27 23:44:29 +00:00
Nik Clayton
c4994073bb Remove the quotes from the kernel configuration "options" lines, to
reflect actual usage.

PR:             docs/12652
Submitted by:   Chris Costello <chris@calldei.com>
1999-07-27 18:21:17 +00:00
Bruce Evans
b686153c38 Fixed disordering in previous commit.
Fixed overflow at column 80 in rev.1.96.
1999-07-27 06:52:46 +00:00
Brian Somers
51f80ae148 Add a default ppp.conf (mode 600).
Originally submitted by: Wayne Self <wself@cdrom.com>

Allow a ppp startup option in rc.conf.

Adjust sysinstall so that it appends to the end of ppp.conf
and uses the generated profile to start ppp in auto mode on
boot.

Submitted by: Josef L. Karthauser <joe@uk.FreeBSD.org>
1999-07-26 10:49:37 +00:00
Kris Kennaway
d952728d76 Typo: assember -> assembler 1999-07-26 03:47:41 +00:00
Bill Paul
691c152864 This commit adds device driver support for Adaptec Duralink PCI fast
ethernet controllers based on the AIC-6915 "Starfire" controller chip.
There are single port, dual port and quad port cards, plus one 100baseFX
card. All are 64-bit PCI devices, except one single port model.

The Starfire would be a very nice chip were it not for the fact that
receive buffers have to be longword aligned. This requires buffer
copying in order to achieve proper payload alignment on the alpha.
Payload alignment is enforced on both the alpha and x86 platforms.
The Starfire has several different DMA descriptor formats and transfer
mechanisms. This driver uses frame descriptors for transmission which
can address up to 14 packet fragments, and a single fragment descriptor
for receive. It also uses the producer/consumer model and completion
queues for both transmit and receive. The transmit ring has 128
descriptors and the receive ring has 256.

This driver supports both FreeBSD/i386 and FreeBSD/alpha, and uses newbus
so that it can be compiled as a loadable kernel module. Support for BPF
and hardware multicast filtering is included.
1999-07-25 04:32:50 +00:00
Jordan K. Hubbard
a2e3ae34eb Document dhcp flags.
Submitted by:	"Sean O'Connell" <sean@stat.Duke.EDU>
1999-07-16 09:22:01 +00:00
Nik Clayton
5bf6ab8369 Add $Id$, to make it simpler for members of the translation teams to
track.

The $Id$ line is normally at the bottom of the main comment block in the
man page, separated from the rest of the manpage by an empty comment,
like so;

     .\"    $Id$
     .\"

If the immediately preceding comment is a @(#) format ID marker than the
the $Id$ will line up underneath it with no intervening blank lines.
Otherwise, an additional blank line is inserted.

Approved by:            bde
1999-07-12 21:02:10 +00:00
Nik Clayton
fbc400a67a Add $Id$, to make it simpler for members of the translation teams to
track.

The $Id$ line is normally at the bottom of the main comment block in the
man page, separated from the rest of the manpage by an empty comment,
like so;

     .\"    $Id$
     .\"

If the immediately preceding comment is a @(#) format ID marker than the
the $Id$ will line up underneath it with no intervening blank lines.
Otherwise, an additional blank line is inserted.

Approved by:            bde
1999-07-12 20:50:10 +00:00
Mike Pritchard
d95d7c87bf Use .Xr to xref pccardd(8). 1999-07-12 19:24:53 +00:00
Nick Hibma
0152aa09ae Correct typo
PR:		9638
Submitted by:	Mauro Allegrini <allegrini@usa.net>
1999-07-12 15:56:32 +00:00
David E. O'Brien
ac8011f83a Add portlint(1) and sort "SEE ALSO"'s. 1999-07-12 07:49:28 +00:00
Tim Vanderhoek
6b4c07361e - FreeBSD.ORG => FreeBSD.org
- Don't discourage people from using "make readmes"

 - Document WRKDIRPREFIX.
1999-07-12 02:33:47 +00:00
Bill Paul
3ebb090530 This commit adds driver support for the SysKonnect SK-984x series
gigabit ethernet adapters. This includes two single port cards
(single mode and multimode fiber) and two dual port cards (also single
mode and multimode fiber). SysKonnect is currently the only
vendor with a dual port gigabit ethernet NIC.

The ports on dual port adapters are treated as separate network
interfaces. Thus, if you have an SK-9844 dual port SX card, you
should have both sk0 and sk1 interfaces attached. Dual port cards
are implemented using two XMAC II chips connected to a single
SysKonnect GEnesis controller. Hence, dual port cards are really
one PCI device, as opposed to two separate PCI devices connected
through a PCI to PCI bridge. Note that SysKonnect's drivers use
the two ports for failover purposes rather that as two separate
interfaces, plus they don't support jumbo frames. This applies to
their Linux driver too. :)

Support is provided for hardware multicast filtering, BPF and
jumbo frames. The SysKonnect cards support TCP checksum offload
however this feature is not currently enabled (hopefully it will
be once we get checksum offload support).

There are still a few things that need to be implemeted, like
the ability to communicate with the on-board LM80 voltage/temperature
monitor, but I wanted to get the driver under CVS control and into
-current so people could bang on it.

A big thanks for SysKonnect for making all their programming info
for these cards (and for their FDDI and token ring cards) available
without NDA (see www.syskonnect.com).
1999-07-09 04:30:09 +00:00
Jordan K. Hubbard
bd17e46e55 Properly document /etc/defaults/rc.conf and rc_conf_files.
Submitted by:		Sheldon Hearn <sheldonh@uunet.co.za>
1999-07-09 01:47:00 +00:00
Kazutaka YOKOTA
da905eaaec - Fix Belgian keyboard map (be.iso.kbd).
- Add Belgian keyboard map with dead keys (be.iso.acc.kbd).

Tested and corrections submitted by: "Renaud Fivet" <rfi@ntc.be>
1999-07-07 13:20:12 +00:00
Tatsumi Hosokawa
07c50a3b6b Added pccard_conf parameter. 1999-07-07 02:01:57 +00:00
Dag-Erling Smørgrav
6b5ca0d83e Rename bpfilter to bpf. 1999-07-06 19:23:32 +00:00
Kazutaka YOKOTA
e92d69c442 List avaiable function keys. 1999-07-06 13:13:47 +00:00
Tatsumi Hosokawa
12061cb940 Added $pccardd_flags. 1999-07-06 12:17:59 +00:00
Nik Clayton
f591fcd118 Clarify static_routes variable's meaning
PR:             docs/12302
Submitted by:   Don Croyle <croyle@gelemna.ft-wayne.in.us>
Reviewed by:    nik
1999-07-05 23:05:25 +00:00
Kazutaka YOKOTA
5e09bef3bf Reflect recent changes in syscons and vga. 1999-07-05 10:03:05 +00:00
Kris Kennaway
d30b1794da Flesh out VOP_ADVLOCK.9 with a description of the available flags
Sync vnode.9 with the definitions in <sys/vnode.h>

Reviewed by:	Doug Rabson
1999-06-30 12:02:52 +00:00
Sheldon Hearn
6bef9f10bb Do nothing for the etc-examples target when SHARED=symlinks, since we'll
end up trying to install into the source directory.

Reported by:	bde
1999-06-27 16:42:25 +00:00
Doug Rabson
0f2a20dfd7 * Tidy up a few things and fix some more warnings.
* Change the devsw declaration to standard form and add missing fields
* Change the filename from cdev_mod.ko to cdev.ko
1999-06-27 12:44:44 +00:00
Mike Pritchard
5d70612b3f Fix some typos and do some minor mdoc cleanup. 1999-06-27 02:38:46 +00:00
Matthew Hunt
084d5338d6 Add Pro/100+ (i82559) to the list of supported products.
Approved by:	dg
1999-06-25 16:48:56 +00:00
Doug Rabson
e523e96f26 Make this sample build again. 1999-06-25 07:50:26 +00:00
John-Mark Gurney
0b60724004 fix the links to the bitstring man page..
fix wording in man page, through != to
1999-06-25 04:51:49 +00:00
John-Mark Gurney
0099533a1c add support to buildworld as a normal user:
-DNOFSCHG	disables installation of libs with flag schg
	GAMEGRP		change the group with which games are installed

also organize the binary section into alphebetical order some what..
1999-06-24 22:50:24 +00:00