tun(4) and tap(4) share the same general management interface and have a lot
in common. Bugs exist in tap(4) that have been fixed in tun(4), and
vice-versa. Let's reduce the maintenance requirements by merging them
together and using flags to differentiate between the three interface types
(tun, tap, vmnet).
This fixes a couple of tap(4)/vmnet(4) issues right out of the gate:
- tap devices may no longer be destroyed while they're open [0]
- VIMAGE issues already addressed in tun by kp
[0] emaste had removed an easy-panic-button in r240938 due to devdrn
blocking. A naive glance over this leads me to believe that this isn't quite
complete -- destroy_devl will only block while executing d_* functions, but
doesn't block the device from being destroyed while a process has it open.
The latter is the intent of the condvar in tun, so this is "fixed" (for
certain definitions of the word -- it wasn't really broken in tap, it just
wasn't quite ideal).
ifconfig(8) also grew the ability to map an interface name to a kld, so
that `ifconfig {tun,tap}0` can continue to autoload the correct module, and
`ifconfig vmnet0 create` will now autoload the correct module. This is a
low overhead addition.
(MFC commentary)
This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this,
and how critical they are. Changes after this are likely easily MFC'd
without taking this merge, but the merge will be easier.
I have no plans to do this MFC as of now.
Reviewed by: bcr (manpages), tuexen (testing, syzkaller/packetdrill)
Input also from: melifaro
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20044
Use it wherever COMPAT_FREEBSD11 is currently specified, like r309749.
Reviewed by: imp, jhb, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20120
Add the infrastructure to allow MD procctl(2) commands, and use it to
introduce amd64 PTI control and reporting. PTI mode cannot be
modified for existing pmap, the knob controls PTI of the new vmspace
created on exec.
Requested by: jhb
Reviewed by: jhb, markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
PTI mode for the process pmap on exec is activated iff P_MD_PTI is set.
On exec, the existing vmspace can be reused only if pti mode of the
pmap matches the P_MD_PTI flag of the process. Add MD
cpu_exec_vmspace_reuse() callback for exec_new_vmspace() which can
vetoed reuse of the existing vmspace.
MFC note: md_flags change struct proc KBI.
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
In all of the architectures we have today, we always use PAGE_SIZE.
While in theory one could define different things, none of the
current architectures do, even the ones that have transitioned from
32-bit to 64-bit like i386 and arm. Some ancient mips binaries on
other systems used 8k instead of 4k, but we don't support running
those and likely never will due to their age and obscurity.
Reviewed by: imp (who also contributed the commit message)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19280
Skylake Xeons.
See SDM rev. 68 Vol 3 4.6.2 Protection Keys and the description of the
RDPKRU and WRPKRU instructions.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18893
iflib is already a module, but it is unconditionally compiled into the
kernel. There are drivers which do not need iflib(4), and there are
situations where somebody might not want iflib in kernel because of
using the corresponding driver as module.
Reviewed by: marius
Discussed with: erj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19041
On some architectures, the structures returned by PT_GET*REGS were not
fully populated and could contain uninitialized stack memory. The same
issue existed with the register files in procfs.
Reported by: Thomas Barabosch, Fraunhofer FKIE
Reviewed by: kib
MFC after: 3 days
Security: kernel stack memory disclosure
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18421
provide a _MEMMOVE extension of _MEMCPY that deals with overlap based on
the previous bcopy(9) implementation and use the former for bcopy(9) and
memmove(9). This addresses my D15374 review comment, avoiding extra MOVs
in case of memmove(9) and trashing the stack pointer.
Replace a call to DELAY(1) with a new cpu_lock_delay() KPI. Currently
cpu_lock_delay() is defined to DELAY(1) on all platforms. However,
platforms with a DELAY() implementation that uses spin locks should
implement a custom cpu_lock_delay() doesn't use locks.
Reviewed by: kib
MFC after: 3 days
The loader tunable 'debug.verbose_sysinit' may be used to toggle verbosity.
This is added to the debugging section of these kernconfs to be turned off
in stable branches for clarity of intent.
MFC after: never
All platforms except powerpc use the same values and powerpc shares a
majority of them.
Go ahead and declare AT_NOTELF, AT_UID, and AT_EUID in favor of the
unused AT_DCACHEBSIZE, AT_ICACHEBSIZE, and AT_UCACHEBSIZE for powerpc.
Reviewed by: jhb, imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17397
The buslogic scsi driver has been tagged as gone in 12 for some time
now. Remove it. The nycbug dmesg database shows only one sighting in 6
for this driver. It was very popular in the early days of the project,
but that popularity seems to have died by 2004 when the nycbug
database started up.
Relnotes: yes
We tagged aha as gone in 12 a while ago. Proceed with its removal.
Data from nycbug's database shows the last sighting of this driver in
6, with the prior one in 4.x show its popularity had died prior to
4.x.
Relnotes: yes
The boot-time ifunc resolver assumes that it only needs to apply
IRELATIVE relocations to PLT entries. With an upcoming optimization,
this assumption no longer holds, so add the support required to handle
PC-relative relocations targeting GNU_IFUNC symbols.
- Provide a custom symbol lookup routine that can be used in early boot.
The default lookup routine uses kobj, which is not functional at that
point.
- Apply all existing relocations during boot rather than filtering
IRELATIVE relocations.
- Ensure that we continue to apply ifunc relocations in a second pass
when loading a kernel module.
Reviewed by: kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16749
became unused in FreeBSD 12.x as a side-effect of the NUMA-related
changes.)
Reviewed by: kib, markj
Discussed with: jeff, re@
Differential Revision: https://reviews.freebsd.org/D16825
This is an amalgam of a patch by Doug Ambrisko to
generalize uart_acpi_find_device, imp moving the
ACPI table to uart_dev_ns8250.c and advice by jhb
to work around a bug in the EPYC 3151 BIOS
(the BIOS incorrectly marks the serial ports as
disabled)
Reviewed by: imp
MFC after: 8 weeks
Differential Revision: https://reviews.freebsd.org/D16432
- In configurations with a pseudo devices section, move 'device crypto'
into that section.
- Use a consistent comment. Note that other things common in kernel
configs such as GELI also require 'device crypto', not just IPSEC.
Reviewed by: rgrimes, cem, imp
Differential Revision: https://reviews.freebsd.org/D16775
Also, I misspoke in r336428. Any devices on sparc64 machines on "isa"
that can do DMA can do 32-bit address DMA and aren't limited to
24-bits of address.
- Change pcpu zone consumers to use a stride size of PAGE_SIZE.
(defined as UMA_PCPU_ALLOC_SIZE to make future identification easier)
- Allocate page from the correct domain for a given cpu.
- Don't initialize pc_domain to non-zero value if NUMA is not defined
There are some misconceptions surrounding this field. It is the
_VM_ NUMA domain and should only ever correspond to valid domain
values as understood by the VM.
The former slab size of sizeof(struct pcpu) was somewhat arbitrary.
The new value is PAGE_SIZE because that's the smallest granularity
which the VM can allocate a slab for a given domain. If you have
fewer than PAGE_SIZE/8 counters on your system there will be some
memory wasted, but this is obviously something where you want the
cache line to be coming from the correct domain.
Reviewed by: jeff
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15933
Make a memmove entry point just before bcopy and have it swap its args
before continuing into the body of bcopy. Adjust the returns to return
dst (original %o0 swapped to %o1) from both entry points. bcopy users
will ignore them. Since these are in the branch delay slot, it should
take no additional time. I use %o6 for this rather than just move %o1
back to %o2 at the end since my sparc64 assembler knowledge is weak.
Also eliminate wrapper call from memmove to bcopy.
Differential Revision: https://reviews.freebsd.org/D15374
This turns on support for kernel dump encryption and compression, and
netdump. arm and mips platforms are omitted for now, since they are more
constrained and don't benefit as much from these features.
Reviewed by: cem, manu, rgrimes
Tested by: manu (arm64)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D15465
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
Dumpers may wish to print messages from an initialization hook; this
change ensures that such messages aren't mixed with output from the
generic dump code.
MFC after: 1 week
Half of implementations always failed (returned (-1)) and they were
previously used in only one place.
Reviewed by: kib, andrew
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15102
OF_getprop_alloc takes element size argument and returns number of
elements in the property. There are valid use cases for such behavior
but mostly API consumers pass 1 as element size to get string
properties. What API users would expect from OF_getprop_alloc is to be
a combination of malloc + OF_getprop with the same semantic of return
value. This patch modifies API signature to match these expectations.
For the valid use cases with element size != 1 and to reduce
modification scope new OF_getprop_alloc_multi function has been
introduced that behaves the same way OF_getprop_alloc behaved prior to
this patch.
Reviewed by: ian, manu
Differential Revision: https://reviews.freebsd.org/D14850
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
assym is only to be included by other .s files, and should never
actually be assembled by itself.
Reviewed by: imp, bdrewery (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14180
correctly for the data contained on each memory page.
There are several components to this change:
* Add a variable to indicate the start of the R/W portion of the
initial memory.
* Stop detecting NX bit support for each AP. Instead, use the value
from the BSP and, if supported, activate the feature on the other
APs just before loading the correct page table. (Functionally, we
already assume that the BSP and all APs had the same support or
lack of support for the NX bit.)
* Set the RW and NX bits correctly for the kernel text, data, and
BSS (subject to some caveats below).
* Ensure DDB can write to memory when necessary (such as to set a
breakpoint).
* Ensure GDB can write to memory when necessary (such as to set a
breakpoint). For this purpose, add new MD functions gdb_begin_write()
and gdb_end_write() which the GDB support code can call before and
after writing to memory.
This change is not comprehensive:
* It doesn't do anything to protect modules.
* It doesn't do anything for kernel memory allocated after the kernel
starts running.
* In order to avoid excessive memory inefficiency, it may let multiple
types of data share a 2M page, and assigns the most permissions
needed for data on that page.
Reviewed by: jhb, kib
Discussed with: emaste
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14282
We don't support float in the boot loaders, so don't include
interfaces for float or double in systems headers. In addition, take
the unusual step of spiking double and float to prevent any more
accidental seepage.
significant source of cache line contention from vm_page_alloc(). Use
accessors and vm_page_unwire_noq() so that the mechanism can be easily
changed in the future.
Reviewed by: markj
Discussed with: kib, glebius
Tested by: pho (earlier version)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14273
We don't support older compilers. Most of the code in these files is
for pre-3.0 gcc, which is at least 15 years obsolete. Move to using
phk's sys/_stdargs.h for all these platforms.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14323
