Commit Graph

90 Commits

Author SHA1 Message Date
Scott Long
c68534f1d5 Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI
command register.  The lazy BAR allocation code in FreeBSD sometimes
disables this bit when it detects a range conflict, and will re-enable
it on demand when a driver allocates the BAR.  Thus, the bit is no longer
a reliable indication of capability, and should not be checked.  This
results in the elimination of a lot of code from drivers, and also gives
the opportunity to simplify a lot of drivers to use a helper API to set
the busmaster enable bit.

This changes fixes some recent reports of disk controllers and their
associated drives/enclosures disappearing during boot.

Submitted by:	jhb
Reviewed by:	jfv, marius, achadd, achim
MFC after:	1 day
2013-08-12 23:30:01 +00:00
Warner Losh
520998911a These checks against BUSY aren't needed: the newbus layer does this
already with the appropriate locks held...  There's no need to do it
here, so just delete the checks.
2009-09-05 08:38:25 +00:00
John Baldwin
a56fe095f0 Temporarily revert the new-bus locking for 8.0 release. It will be
reintroduced after HEAD is reopened for commits by re@.

Approved by:	re (kib), attilio
2009-08-20 19:17:53 +00:00
Attilio Rao
444b91868b Make the newbus subsystem Giant free by adding the new newbus sxlock.
The newbus lock is responsible for protecting newbus internIal structures,
device states and devclass flags. It is necessary to hold it when all
such datas are accessed. For the other operations, softc locking should
ensure enough protection to avoid races.

Newbus lock is automatically held when virtual operations on the device
and bus are invoked when loading the driver or when the suspend/resume
take place. For other 'spourious' operations trying to access/modify
the newbus topology, newbus lock needs to be automatically acquired and
dropped.

For the moment Giant is also acquired in some key point (modules subsystem)
in order to avoid problems before the 8.0 release as module handlers could
make assumptions about it. This Giant locking should go just after
the release happens.

Please keep in mind that the public interface can be expanded in order
to provide more support, if there are really necessities at some point
and also some bugs could arise as long as the patch needs a bit of
further testing.

Bump __FreeBSD_version in order to reflect the newbus lock introduction.

Reviewed by:    ed, hps, jhb, imp, mav, scottl
No answer by:   ariff, thompsa, yongari
Tested by:      pho,
                G. Trematerra <giovanni dot trematerra at gmail dot com>,
                Brandon Gooch <jamesbrandongooch at gmail dot com>
Sponsored by:   Yahoo! Incorporated
Approved by:	re (ksmith)
2009-08-02 14:28:40 +00:00
Ed Schouten
c5e30cc02b Last minute TTY API change: remove mutex argument from tty_alloc().
I don't want people to override the mutex when allocating a TTY. It has
to be there, to keep drivers like syscons happy. So I'm creating a
tty_alloc_mutex() which can be used in those cases. tty_alloc_mutex()
should eventually be removed.

The advantage of this approach, is that we can just remove a function,
without breaking the regular API in the future.
2009-05-29 06:41:23 +00:00
Doug Ambrisko
a18c284294 Start to convert this over to the new tty layer. These changes allow
this driver to compile and limp along with the new layer.  These changes
do not deal with proper locking around access to the HW.  This is only
a starting point.  I have not tested modem control but tip seems to work
okay and I can send and receive characters which I needed for one of my
-current boxes.  I have not tied this driver back up to the build since
I don't want people to think it is ready for prime time.  If anyone
else has some cycles to work on this feel free to!

Also add support for a 16 port PCI interface I have at work.

Glanced at by:	ed
2009-04-27 15:58:38 +00:00
Ed Schouten
6bfa9a2d66 Replace all calls to minor() with dev2unit().
After I removed all the unit2minor()/minor2unit() calls from the kernel
yesterday, I realised calling minor() everywhere is quite confusing.
Character devices now only have the ability to store a unit number, not
a minor number. Remove the confusion by using dev2unit() everywhere.

This commit could also be considered as a bug fix. A lot of drivers call
minor(), while they should actually be calling dev2unit(). In -CURRENT
this isn't a problem, but it turns out we never had any problem reports
related to that issue in the past. I suspect not many people connect
more than 256 pieces of the same hardware.

Reviewed by:	kib
2008-09-27 08:51:18 +00:00
Peter Wemm
cb3a418e8d Initialize DWBuf[3].
Approved by:  re (rwatson, blanket)
2007-07-05 06:51:49 +00:00
Remko Lodder
c6feae7224 Fix Rocketport so that it does not crash the system when a device pointer
changes for example:

(From Craig Leres):

tip to a rocketport line
run "/etc/rc.d/devfs restart"
exit tip
(wait for the system to reboot)

Thanks to Robert Watson for poking me to fix this.

PR:		kern/109152
Approved by:	imp (mentor)
Approved by:	re (kensmith)
Reviewed by:	jhb
Submitted by:	Craig Leres <leres@ee dot lbl dot gov>
2007-06-26 13:50:48 +00:00
Marius Strobl
61e5f5471e - Make rp(4) 64-bit- and endian-clean as well as work on strict alignment
archs. [1]
- Instead of bus_space_{read,write}*(rman_get_bustag(), rman_get_bushandle())
  use bus_{read,write}*() for efficiency.

Reported by:	Peter Losher [1]
Tested on:	i386, sparc64
MFC after:	2 weeks
2006-11-20 12:59:27 +00:00
John Baldwin
98355c9451 The UPCI 32 rp(4) card uses BAR 2 like the UPCI 80 card.
Submitted by:	Vitaliy Skakun vit dot ska at gmail dot com
MFC after:	3 days
2006-01-25 14:55:11 +00:00
Ruslan Ermilov
3238c6bd33 Fix -Wundef from compiling the amd64 LINT. 2005-12-04 10:06:06 +00:00
John Baldwin
98e8d0cb32 Fix support for multiple RocketPort cards in the same machine by including
the RocketPort unit number in the name of the devices.  This means that
unit 0 device names will change from ttyR0 .. ttyRf to ttyR00 .. ttyR0f.

Reviewed by:	phk
2005-11-08 15:33:39 +00:00
Poul-Henning Kamp
c530c970bc we know it is called rpclose() so call it directly. 2005-10-16 20:35:05 +00:00
Poul-Henning Kamp
733634738e Eliminate two unused arguments to ttycreate(). 2005-10-16 20:22:56 +00:00
John Baldwin
04f716a436 - Use pci_get_device() and pci_get_vendor() when we only want one part
of the device id.
- Use BAR2 rather than BAR0 for the Rocketport UPCI 8O card.  I suspect
  that other UPCI cards might need to use BAR2 as well.

Tested by:	wsk at gddsn dot org dot cn
MFC after:	1 week
2005-03-25 03:10:51 +00:00
Warner Losh
d2b677bb1a Use BUS_PROBE_DEFAULT in preference to 0 and BUS_PROBE_LOW_PRIORITY in
preference to some random negative number to allow other drivers a
bite at the apple.
2005-03-01 08:58:06 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Poul-Henning Kamp
0d0d73e427 Use tty layer generic code instead of local copy.
Device names {cua,tty}R%r[.init,.lock] clashes with pty(4) driver
and allows for only 32 ports.  This should probably be revisited.
2004-10-04 09:38:53 +00:00
Poul-Henning Kamp
a45b36ad47 Use ttyalloc() instead of ttymalloc(NULL) 2004-09-17 07:28:07 +00:00
Poul-Henning Kamp
672c05d49c Preparation commit for the tty cleanups that will follow in the near
future:

rename ttyopen() -> tty_open() and ttyclose() -> tty_close().

We need the ttyopen() and ttyclose() for the new generic cdevsw
functions for tty devices in order to have consistent naming.
2004-07-15 20:47:41 +00:00
Poul-Henning Kamp
911dbd84c7 Introduce ttygone() which indicates that the hardware is detached.
Move dtrwait logic to the generic TTY level.
2004-07-11 15:18:39 +00:00
Poul-Henning Kamp
ec66f15d14 Put the pre FreeBSD-2.x tty compat code under BURN_BRIDGES. 2004-06-21 22:57:16 +00:00
Andrew Gallatin
d6a774ca4a Prevent the rp driver from panic'ing on first access and make at
least the pci device unloadable

- Use ttymalloc() rather than a plain  malloc to allocate the
  rp->rp_tty ttys.  This is now required due to the recent locking
  changes to ttys and prevents a panic due to locking an unitialized
  t_mtx.

- Allow the pci driver to be unloaded.  This involved moving
  the call rp_releaseresource() to the end of rp_pcireleaseresource(),
  since rp_pcireleaseresource() uses ctlp->dev, which is freed
  by rp_releaseresource().

- Allow the generic part of the driver to be unattached by providing
  a hook to cancel timeouts.

Glanced at by: obrien
2004-06-21 13:02:25 +00:00
Poul-Henning Kamp
89c9c53da0 Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
Poul-Henning Kamp
1930e303cf Deorbit COMPAT_SUNOS.
We inherited this from the sparc32 port of BSD4.4-Lite1.  We have neither
a sparc32 port nor a SunOS4.x compatibility desire these days.
2004-06-11 11:16:26 +00:00
Poul-Henning Kamp
13e84a71e0 Centralize the line discipline optimization determination in a function
called ttyldoptim().

Use this function from all the relevant drivers.

I belive no drivers finger linesw[] directly anymore, paving the way for
locking and refcounting.
2004-06-04 21:55:55 +00:00
Poul-Henning Kamp
2140d01b27 Machine generated patch which changes linedisc calls from accessing
linesw[] directly to using the ttyld...() functions

The ttyld...() functions ar inline so there is no performance hit.
2004-06-04 16:02:56 +00:00
Poul-Henning Kamp
e451f9b758 Make the remaining serial drivers call ttyioctl() rather than calling
the linedisc directly.
2004-06-04 08:02:37 +00:00
Poul-Henning Kamp
be9bd88238 There is no need to explicitly call the stop function. In all likelyhood
->l_close() did it and ttyclose certainly will.
2004-06-01 11:57:15 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Poul-Henning Kamp
dc08ffec87 Device megapatch 4/6:
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.

Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
Poul-Henning Kamp
8e1f1df080 Device megapatch 3/6:
Add missing D_TTY flags to various drivers.

Complete asserts that dev_t's passed to ttyread(), ttywrite(),
ttypoll() and ttykqwrite() have (d_flags & D_TTY) and a struct tty
pointer.

Make ttyread(), ttywrite(), ttypoll() and ttykqwrite() the default
cdevsw methods for D_TTY drivers and remove the explicit initializations
in various drivers cdevsw structures.
2004-02-21 20:41:11 +00:00
Poul-Henning Kamp
c9c7976f7f Device megapatch 1/6:
Free approx 86 major numbers with a mostly automatically generated patch.

A number of strategic drivers have been left behind by caution, and a few
because they still (ab)use their major number.
2004-02-21 19:42:58 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Warner Losh
38d8c9940b Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 06:42:59 +00:00
Poul-Henning Kamp
46eb2dfce9 Undo single-intance inlining which is way above the comfort limit for GCC. 2003-07-23 18:03:22 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Poul-Henning Kamp
f341ca9891 Remove #include <sys/dkstat.h> 2003-02-16 14:13:23 +00:00
Tor Egge
0a676b7eb6 Fix data corruption caused by last byte in oddly sized transfers being read
to wrong location in RxBuf and written from wrong location in TxBuf.
2002-10-20 18:43:11 +00:00
Poul-Henning Kamp
031fd299d7 Be consistent about functions being static.
Spotted by:	FlexeLint.
2002-10-16 08:48:39 +00:00
John Baldwin
44731cab3b Change the suser() API to take advantage of td_ucred as well as do a
general cleanup of the API.  The entire API now consists of two functions
similar to the pre-KSE API.  The suser() function takes a thread pointer
as its only argument.  The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0.  The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.

Discussed on:	smp@
2002-04-01 21:31:13 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Bruce Evans
89f37afac5 #include "opt_compat.h" so that the support for old ioctls can actually
be compiled.  Old tty ioctls are still used (possibly ifdef'ed) in at
least the following programs in the src tree:
  atc des ee fontedit gdb gdbserver lock ntp perl5 tcsh telnet top vttest

rp.c:
Unremoved used variables so that the support for old ioctls actually
compiles.

Not tested at runtime by:	bde
2002-02-15 08:28:34 +00:00
Andrew Gallatin
16676bcded Force the RxBuf and TxBuf arrays to be aligned on 16-bit boundaries to
make the driver work on alpha

approved by: tanimura
2001-11-05 12:57:46 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
David Malone
7cc0979fd6 Convert more malloc+bzero to malloc+M_ZERO.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
2000-12-08 21:51:06 +00:00
Poul-Henning Kamp
cf9fa8e725 Move suser() and suser_xxx() prototypes and a related #define from
<sys/proc.h> to <sys/systm.h>.

Correctly document the #includes needed in the manpage.

Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.
2000-10-29 16:06:56 +00:00