Commit Graph

31 Commits

Author SHA1 Message Date
Kip Macy
ef9e6d4c6c reduce the size of the jumbo ring on i386 and disable pcpu cluster caching 2008-03-31 21:02:27 +00:00
Kip Macy
8e10660f12 - update firmware to 5.0
- add support for T3C
- add DDP support (zero-copy receive)
- fix TOE transmit of large requests
- fix shutdown so that sockets don't remain in CLOSING state indefinitely
- register listeners when an interface is brought up after tom is loaded
- fix setting of multicast filter
- enable link at device attach
- exit tick handler if shutdown is in progress
- add helper for logging TCB
- add sysctls for dumping transmit queues

- note that TOE wxill not be MFC'd until after 7.0 has been finalized

MFC after: 3 days
2008-02-23 01:06:17 +00:00
Kip Macy
2fd79ec2de put tx queue size back to 1024 2008-01-16 00:26:04 +00:00
Kip Macy
139edb19d9 - Simplify mb_free_ext_fast
- increase asserts for mbuf accounting
- track outstanding mbufs (maps very closely to leaked)
- actually only create one thread per port if !multiq
    Oddly enough this fixes the use after free

- move txq_segs to stack in t3_encap
- add checks that pidx doesn't move pass cidx
- simplify mbuf free logic in collapse mbufs routine
2008-01-15 08:08:09 +00:00
Kip Macy
60f1e27625 - move WR_LEN in to cxgb_adapter.h add PIO_LEN to make intent clearer
- move cxgb_tx_common in to cxgb_multiq.c and rename to cxgb_tx
- move cxgb_tx_common dependencies
- further simplify cxgb_dequeue_packet for the non-multiqueue case
- only launch one service thread per port in the non-multiq case
- remove dead cleaning code from cxgb_sge.c
- simplify PIO case substantially in by returning directly from mbuf collapse
  and just using m_copydata
- remove gratuitous m_gethdr in the rx path
- clarify freeing of mbufs in collapse
2008-01-15 03:27:42 +00:00
Kip Macy
5ef02c0223 Convert over to using the multiqueue infrastructure although all calls going
through cxgb_start still end up using queue 0
2008-01-13 22:38:17 +00:00
Kip Macy
9330dbc3a1 Be more aggressive about tx cleaning - when multiples streams were running the tx
queue could fill up and stop getting cleaned.
2008-01-11 02:26:54 +00:00
Kip Macy
10b16b260c Add support for selectively dumping the state of the hardware response queue.
Change ordering of a couple of types.
2008-01-10 06:54:20 +00:00
Kip Macy
8d5754afc5 make nqsets a uint32_t so that sysctl will work
add 2 fields for allowing queue dumping
2008-01-09 08:12:24 +00:00
Kip Macy
8090c9f504 Make TCP offload work on HEAD (modulo negative interaction between sbcompress
and t3_push_frames).
 - Import latest changes to cxgb_main.c and cxgb_sge.c from toestack p4 branch
 - make driver local copy of tcp_subr.c and tcp_usrreq.c and override tcp_usrreqs so
   TOE can also functions on versions with unmodified TCP

- add cxgb back to the build
2007-12-17 08:17:51 +00:00
Kip Macy
3e96c7e790 Import updated support code for the TOM (tcp offload module). 2007-12-15 21:54:59 +00:00
Kip Macy
2de1fa86d7 pull in changes made to RELENG_6 version in the process of doing the MFC
Supported by: Chelsio
Approved by: re (blanket)
2007-09-10 00:59:51 +00:00
Kip Macy
8adc65adda Add back in support for normal mbuf chaining on RX under DISABLE_MBUF_IOVEC
Approved by: re(blanket)
Supported by: Chelsio
2007-09-09 04:34:03 +00:00
Kip Macy
5c5df3da16 - fix qset to port binding as a proper fix for the problems encountered on the 4-port
- fix the use after free seen when sending packets small enough to fit as an immediate
   and bpf peers are present
 - update to firmware rev 4.7 along with various small vendor fixes

Supported by: Chelsio
Approved by: re (blanket)
MFC after: 3 days
2007-09-09 01:28:03 +00:00
Kip Macy
7ac2e6c362 Fixes for 4 port and small packet optimization
- remove cpl->iff panic - we can't know the port number from the rspq on the 4-port
- pick the ifnet based on the interface in the CPL header
- switch to using qset 0 for egress on the 4-port for now - may change
  when we start using RSS
- move ether_ifdetach to before the port lock gets deinitialized to avoid
  hang in the case where there are BPF peers (cxgb_ioctl is called indirectly
  when BPF peers are present)
- don't call t3_mac_reset if multiport is set, this was causing tx errors
  by misconfiguring the MAC on the 4-port
- change V_TXPKT_INTF to use txpkt_intf as the interfaces are not contiguous
- free the mbuf immediately in the case where the payload is small enough to be copied
  into the rspq
- only update the coalesce timer if for a queue if packets were taken off of it
- add in missed 20ms DELAY in initializaton vsc8211

- prompt MFC as this only applies to the 4-port which is currently completely
  broken - OK'd by kensmith

Supported by: Chelsio
Approved by: re (blanket)
MFC after: 0 days
2007-08-25 21:07:37 +00:00
Kip Macy
7aff6d8ed3 forward port signedness fixes from RELENG_6
fix compile error for case where MSI_SUPPORTED not defined

Approved by: re (blanket)
2007-08-17 05:57:04 +00:00
Kip Macy
6b68e276ce - In all structures other than port info port is a pointer to a port info,
make the code less confusing by renaming the port number to port_id

Approved by: re (blanket)
2007-08-10 23:33:34 +00:00
Kip Macy
ac3a6d9cef - integrate most recent changes from vendor branch and upgrade to firmware revision 4.5.5
- add filter support
	- further improvements for T304
- recover gracefully from spurious immediate packets

Approved by: re(blanket)
Supported by: Chelsio
MFC after: 3 days
2007-07-17 06:50:35 +00:00
Kip Macy
b8fe6051bf MFp4 122896
- reduce cpu usage by as much as 25% (40% -> 30) by doing txq reclaim more efficiently
   - use mtx_trylock when trying to grab the lock to avoid spinning during long encap loop
   - add per-txq reclaim task
   - if mbufs were successfully re-claimed try another pass
- track txq overruns with sysctl

Approved by: re (blanket)
2007-07-10 06:01:45 +00:00
Kip Macy
bb38cd2fbc - switch adapter and port lock over to using sx so that resources
can be allocated atomically
- add debug macros for printing lock initialization / teardown
- add buffers to port_info and adapter to allow each lock to have a
  unique name
- destroy mutexes initialized by cxgb_offload_init
- remove recursive calls to ADAPTER_LOCK
- move callout_drain calls so that they don't occur with the lock held
- ensure that only as many qsets as are needed are initialized and
  destroyed

MFC after: 3 days
Sponsored by: Chelsio Inc.
2007-06-17 04:33:38 +00:00
Kip Macy
ef72318f0e - import new common code for the T304
- update to firmware version 4.1.0

- switch over to standard method for initializing cdevs (contributed by scottl@)
- break out timer_reclaim_task to be per-port
- move msix teardown into separate function
- fix bus_setup_intr for msi-x for the multi-port case so that msi-x resources
  are not corrupted on unload
- handle 10/100/1000 base-T media and auto negotiation
- bind qset to cpu even for singleq case
- white space cleanups
- remove recursive PORT_LOCK
- move mtu setting to separate function
- stop and re-init port when changing mtu
- replace all direct references to m_data with calls to mtod
- handle attach failure better by not trying to de-initialize
  taskqueues when they have not been allocated
- no longer default to jumbo frames

Sponsored by: Chelsio
MFC after: 3 days
2007-06-13 05:36:00 +00:00
Kip Macy
10faa56870 When building cxgb as a module make include paths relative to the driver's root.
This will make it possible to build the module out of tree against an older src tree.

MFC after: 3 days
2007-05-28 22:57:27 +00:00
Kip Macy
d722cab49a (MFp4)
- upgrade to reflect state of 1.0.0.86
        - move from firmware rev 3.2 to 4.0.0
        - import driver bits for offload functionality
	- remove binary distribution clause from top level files as it
	  runs counter to the intent of purely supporting the hardware

MFC after: 3 days
2007-05-25 09:48:20 +00:00
Kip Macy
c0a24dd4aa Convert driver RX path over to using mbuf iovec 2007-04-08 15:04:19 +00:00
Kip Macy
fa0521c0e9 Make DMA tags per-queue to facilate parallel mappings
Defer mbuf allocation and initialization until after data has already been
received in a cluster

This reduces cpu utilization somewhat, but it only improves the rx path.
Recent changes to TCP appear to make us rate limited by the TX path.

This is the first step in reducing mbuf management overhead for manipulating
clusters.

MFC after: 3 days
2007-04-04 05:29:18 +00:00
Kip Macy
ac6b4cf110 bus_size_t is a bad cross-architectural type with respect to printf, use uint32_t instead 2007-03-24 04:28:33 +00:00
Kip Macy
f309e60da0 commit missed change 2007-03-23 22:02:11 +00:00
Kip Macy
693d746cc1 make MSI-X the default and allocate up to mp_ncpus queues per port
MFC after: 3 days
2007-03-21 07:25:40 +00:00
Kip Macy
577e9bbe3e Synchronize with version 1.0.071 of Chelsio's common code
(with the notable exception of improvements for using multiple TX queues)

This adds support for the T3B2 ASIC rev

Obtained from: Chelsio
MFC after: 3 days
2007-03-20 21:43:32 +00:00
Kip Macy
b9d6bc3b79 make desc_reclaimable macro safe to arbitrary arguments 2007-03-14 06:33:28 +00:00
Kip Macy
b6d90eb779 First of several commits for driver support for the Chelsio T3B 10 Gigabit
Ethernet adapter.

Reviewed by: scottl, sam

For those interested in the preliminary performance work see below.

Plots of mxge vs. cxgb running netpipe:

blocksize vs. bandwidth:
http://www.fsmware.com/chelsio.random/bsvsbw.gif

blocksize vs. RTT:
First of several commits for driver support for the Chelsio T3B 10 Gigabit
Ethernet adapter.

Reviewed by: scottl, sam

For those interested in the preliminary performance work see below.

Plots of mxge vs. cxgb running netpipe:

blocksize vs. bandwidth:
http://www.fsmware.com/chelsio.random/bsvsbw.gif

blocksize vs. RTT:
http://www.fsmware.com/chelsio.random/bsvstime.gif

blocksize vs. RTT for block sizes <= 10kb:
http://www.fsmware.com/chelsio.random/bsvstime_10kb.gif
http://www.fsmware.com/chelsio.random/bsvstime_10kb3.gif
2007-03-14 02:37:44 +00:00