Commit Graph

20 Commits

Author SHA1 Message Date
Marius Strobl
c15fccb8f2 - Use the revamped code from the gem(4) PCI front-end, which
doesn't require parts of the Expansion ROM to be copied around,
  for obtaining the MAC address on !OFW platforms.
- Don't unnecessarily cache bus space tag and handle nor RIDs
  in the softcs of the front-ends.
- Don't use function calls in initializers.
- Let the SBus front-end depend on sbus(4).
2008-04-26 14:17:21 +00:00
Marius Strobl
da28723ecd o Disable HMEDEBUG by default.
o Add CTASSERTs ensuring that HME_NRXDESC and HME_NTXDESC are set to
  legal values.
o Use appropriate maxsize, nsegments and maxsegsize parameters when
  creating DMA tags and correct some comments related to them.
o The FreeBSD bus_dmamap_sync(9) supports ored together flags for quite
  some time now so collapse calls accordingly.
o Add missing BUS_DMASYNC_PREREAD when syncing the control DMA maps in
  hme_rint() and hme_start_locked().
o Keep state of the link state and use it to enable or disable the MAC
  in hme_mii_statchg() accordingly as well as to return early from
  hme_start_locked() in case the link is down.
o Introduce a sc_flags and use it to replace individual members like
  sc_pci.
o Add bus_barrier(9) calls to hme_mac_bitflip(), hme_mii_readreg(),
  hme_mii_writereg() and hme_stop() to ensure the respective bit
  has been written before we starting polling on it and for the right
  bits to change.
o Rather just returning in case hme_mac_bitflip() fails and leaving us
  in an undefined state report the problem and move on; chances are
  the requested configuration will become active shortly after.
o Don't call hme_start_locked() in hme_init_locked() unconditionally
  but only after calls to hme_init_locked() when it's appropriate, i.e.
  in hme_watchdog().
o Add a KASSERT which asserts nsegs is valid also to hme_load_txmbuf().
o In hme_load_txmbuf():
  - use a maximum of the newly introduced HME_NTXSEGS segments instead
    of the incorrect HME_NTXQ, which reflects the maximum TX queue
    length, for loading the mbufs and put the DMA segments back onto
    the stack instead of the softc as 16 should be ok there.
  - use the common errno(2) return values instead of homegrown ones,
  - given that hme_load_txmbuf() is allowed to fail resulting in a
    packet drop for quite some time now implement the functionality of
    hme_txcksum() by means of m_pullup(9), which de-obfuscates the code
    and allows to always retrieve the correct length of the IP header, [1]
  - also add a KASSERT which asserts nsegs is valid,
  - take advantage of m_collapse(9) instead of m_defrag(9) for
    performance reasons.
o Don't bother to check whether the interface is running or whether its
  queue is empty before calling hme_start_locked() in hme_tint(), the
  former will check these anyway.
o In hme_intr() call hme_rint() before hme_tint() as gem_tint() may
  take quite a while to return when it calls hme_start_locked().
o Get rid of sc_debug and just check if_flags for IFF_DEBUG directly.
o Add a shadow sc_ifflags so we don't reset the chip when unnecessary.
o Handle IFF_ALLMULTI correctly. [2]
o Use PCIR_BAR instead of a homegrown macro.
o Replace sc_enaddr[6] with sc_enaddr[ETHER_ADDR_LEN].
o Use the maximum of 256 TX descriptors for better performance as using
  all of them has no additional static cost rather than using just half
  of them.

Reported by:	rwatson [2]
Suggested by:	yongari [1]
Reviewed by:	yongari
MFC after:	1 month
2008-04-24 23:12:03 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Marius Strobl
8386475dc8 Release the IRQ resource on detach. This fixes repeatedly loading and
unloading the hme(4) module in case it attaches to sbus(4).

MFC after:	1 week
2005-04-05 17:51:56 +00:00
Pyun YongHyeon
38fa13a6a2 Make hme(4) mpsafe
- Let hme_start()/hme_init() acquire lock and then call
   hme_start_locked()/hme_init_locked() respectivly.
 - Teardown interrupt handler before hme_detach().
 - Remove IFF_NEEDSGIANT flag and mark interrupt handler INTR_MPSAFE.
 - Set callout handler to CALLOUT_MPSAFE.
 - Add locks in hme MII interface.

Reviewed by:	jake
Tested by:	Julian C. Dunn  <jdunn at opentrend dot net>
MFC after:	2 weeks
2004-11-22 06:46:30 +00:00
Marius Strobl
f7abebde9e - Use bus_space_subregion() rather than arithmetic on bus_space_handle_t. [1]
- Properly use the error variable and return it on failure in the attach-
  routines.

Reviewed by:	tmm
Inspired by:	NetBSD [1]
2004-08-12 20:37:02 +00:00
Marius Strobl
26280d88d7 - Introduce an ofw_bus kobj-interface for retrieving the OFW node and a
subset ("compatible", "device_type", "model" and "name") of the standard
  properties in drivers for devices on Open Firmware supported busses. The
  standard properties "reg", "interrupts" und "address" are not covered by
  this interface because they are only of interest in the respective bridge
  code. There's a remaining standard property "status" which is unclear how
  to support properly but which also isn't used in FreeBSD at present.
  This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
  ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
  vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
  This in turn allows to simplify and remove code-duplication in drivers for
  devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
  drivers for their children to use the ofw_bus kobj-interface. The IVAR-
  interfaces of the Central, EBus and FHC are entirely replaced by this. The
  PCI bus driver used its own kobj-interface and now also uses the ofw_bus
  one. The IVARs special to the SBus, e.g. for retrieving the burst size,
  remain.
  Beware: this causes an ABI-breakage for modules of drivers which used the
  IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
  recompiled.
  The style-inconsistencies introduced in some of the bus drivers will be
  fixed by tmm@ in a generic clean-up of the respective drivers later (he
  requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
  use the ofw_bus kobj-interface. This invloves removing the IVARs related
  to the "reg" property which were unused and a leftover from the NetBSD
  origini of the code. There's no ABI-breakage caused by this because none
  of these driver are currently built as modules.
  There are other powerpc bus drivers which can be converted to the ofw_bus
  kobj-interface, e.g. the PCI bus driver, which should be done together
  with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
  advantage of the ofw_bus kobj-interface and simplify them a bit.

Reviewed by:	grehan, tmm
Approved by:	re (scottl)
Discussed with:	tmm
Tested with:	Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
Pyun YongHyeon
74d554ae00 Implement TCP/UDP Transmit/Receive checksum offload.
Since HME doesn't compensate the checksum for UDP datagram which
can yield to 0x0, UDP transmit checksum offload is disabled by
default. The UDP Transmit checksum offload can be reactivated
by setting special link option link0 with ifconfig(8).

Approved by:	jake (mentor)
Reviewed by:	tmm
Tested by:	Herve Boulouis <amon@sockar.homeip.net>
2004-08-05 02:52:33 +00:00
Poul-Henning Kamp
186f2b9e04 Add missing <sys/module.h> includes currently relying on nested include
in <sys/kernel.h>
2004-06-03 06:10:02 +00:00
Scott Long
44eaf12c79 Remove a redundant include directive 2004-05-28 04:42:10 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Marcel Moolenaar
11a91bffe5 Preparatory commit to allow prototypes in ofw_machdep.h to contain
both newbus types and OFW types. This involves either including
<machine/bus.h> or <dev/ofw/openfirm.h>.

Reviewed by: jake, jmg, tmm
2003-09-02 20:24:42 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Marcel Moolenaar
70cba801e9 s#<foo/bar.h>#<dev/foo/bar.h>#g 2003-08-23 05:51:03 +00:00
Warner Losh
3d11ce04c6 s=include <ofw/=include <dev/ofw/= to reflect removal of -I$S/dev 2003-08-23 00:11:16 +00:00
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
Thomas Moestl
a0de7a9e73 Add detach, shutdown, suspend and resume methods.
Tested by:	jake
2003-01-09 00:45:10 +00:00
Thomas Moestl
7ee69ef245 Assorted fixes:
- remove some useless code from the status change handler that was intended
  to enable the the MII drivers for external phys; this is already done
  during interface initialization, and the deleted code made some
  assumptions about phy addresses that do not seem to hold true on newer
  cards. This should get at least one of the two hmes of newer Netra t1
  machines working.
- correct the interrupt resource allocation
- bump the number of RX descriptors, lower values cause promblems on some
  machines
2002-03-23 19:37:11 +00:00
Thomas Moestl
52381bfae4 Add a driver for the Sun HME PCI/SBus ethernet adaptor, which is onboard
in most machines of the Sun Ultra series. This is a port of the NetBSD
driver which I enhanced to make use of the gather functionality and the
configurable RX buffer offset to avoid copying all received/sent packet
(instead, packets will be directly DMAd from mbuf chains and into mbuf
clusters now).
2002-02-27 17:35:48 +00:00